Hallo NG,
nach längerer Zeit ohne Probleme hab ich jetzt wieder eines, das mich zur Verzweiflung treibt. Ähnliche Probleme wie meines habe ich bei meiner Goog..-Suche schon gefunden, aber die Lösungsansätze führten bei mir nicht zum Erfolg.
Nach einem Update von 11.4 auf 12.1 hat mein Sound nicht mehr mitgemacht. Ich habe meinen Monitor per HDMI an meinem Rechner angeschlossen und keine Probleme mit dem Sound unter openSuSE 11.4. Nach dem Update hatte ich zwar noch die Systemklänge, jedoch keinen Sound mehr bei kaffeine oder youtube-Videos.
Also dachte ich zunächst an eine verkorkste Konfigurationsübernahme und habe in YaST beide Soundkarten (die analog mit Dolby 5.1 und die digitale) gelöscht, alle Konfigurationsdateien, die ich gefunden habe, in .bak umbenannte, aus meinem Home-Verzeichnis alles was nach Sound ausgesehen hat, abenfalls in .bak umbenannt und neu gestartet. Danach habe ich die beiden Soundkarten mit YaST wieder konfiguriert und es brachte keine Besserung.
Ich habe dann unter Systemeinstellungen -> Multimedia -> Phonon die veschiedenen Audio-Geräte mit Testklang durchprobiert. Mein HDMI-Gerät hat dort funktioniert. Dann habe ich amarok probiert, da habe ich ebenfalls Sound gehabt.
Dann habe ich testweise nochmal beide Soundkarten gelöscht und im Bios die interne 5.1-Soundkarte deaktiviert, weil ich diese nicht brauche. Wieder gestartet und die HDMI-Soundkarte eingrichtet. Test-Sound ließ sich keiner abspielen, aber die Systemklänge sind da, genauso wie der Sound bei amarok funktioniert. Nicht jedoch in kaffeine. Dort habe ich allerdings die Fehlermeldung erhalten, dass kein audio-output erfolgen kann. Ich gehe mal davon aus, dass kaffeine gar nichts von der HDMI-Karte weiß...
Ich habe dann auch nachgesehen, ob noch irgendwas pulse-audio-mäßiges installiert ist, aber da sind keine Pakete installiert. Ich habe zwischendurch auch mal die Installation von pavucontrol probiert, weil das in einigen Fällen geholfen haben soll.
In KMix wird zwar die Karte als solches erkannt, aber ich kann keinen Kanal auswählen. in alsamixer kann ich die keine Lautstärke regeln, lediglich muten. Wenn ich einige Zeit mit alsamixer, kmix und weiteren Mixern oder Sound-Konfigurationen herumgespielt habe, dann erhalte ich nicht einmal mehr den Testsound bei Phonon auf meinem HDMI-Gerät... :-(
Hier die Daten zu meiner Sound-Hardware:
hwinfo erklärt mir:
alsa-info.sh zeigt:
Ich werde jetzt mal noch folgendes probieren:
Ich aktiviere wieder meine analoge onBoard-Soundkarte und schließe meinen Monitor per VGA an und schließe gleichzeitig das Soundkabel an den Monitor an, sodass nichts über HDMI läuft. Das Ergebnis kann ich aber erst morgen mitteilen. Diese Lösung wäre auch nur temporär und nicht auf Dauer für mich zu gebrauchen.
Viele Grüße
Andreas
nach längerer Zeit ohne Probleme hab ich jetzt wieder eines, das mich zur Verzweiflung treibt. Ähnliche Probleme wie meines habe ich bei meiner Goog..-Suche schon gefunden, aber die Lösungsansätze führten bei mir nicht zum Erfolg.
Nach einem Update von 11.4 auf 12.1 hat mein Sound nicht mehr mitgemacht. Ich habe meinen Monitor per HDMI an meinem Rechner angeschlossen und keine Probleme mit dem Sound unter openSuSE 11.4. Nach dem Update hatte ich zwar noch die Systemklänge, jedoch keinen Sound mehr bei kaffeine oder youtube-Videos.
Also dachte ich zunächst an eine verkorkste Konfigurationsübernahme und habe in YaST beide Soundkarten (die analog mit Dolby 5.1 und die digitale) gelöscht, alle Konfigurationsdateien, die ich gefunden habe, in .bak umbenannte, aus meinem Home-Verzeichnis alles was nach Sound ausgesehen hat, abenfalls in .bak umbenannt und neu gestartet. Danach habe ich die beiden Soundkarten mit YaST wieder konfiguriert und es brachte keine Besserung.
Ich habe dann unter Systemeinstellungen -> Multimedia -> Phonon die veschiedenen Audio-Geräte mit Testklang durchprobiert. Mein HDMI-Gerät hat dort funktioniert. Dann habe ich amarok probiert, da habe ich ebenfalls Sound gehabt.
Dann habe ich testweise nochmal beide Soundkarten gelöscht und im Bios die interne 5.1-Soundkarte deaktiviert, weil ich diese nicht brauche. Wieder gestartet und die HDMI-Soundkarte eingrichtet. Test-Sound ließ sich keiner abspielen, aber die Systemklänge sind da, genauso wie der Sound bei amarok funktioniert. Nicht jedoch in kaffeine. Dort habe ich allerdings die Fehlermeldung erhalten, dass kein audio-output erfolgen kann. Ich gehe mal davon aus, dass kaffeine gar nichts von der HDMI-Karte weiß...
Ich habe dann auch nachgesehen, ob noch irgendwas pulse-audio-mäßiges installiert ist, aber da sind keine Pakete installiert. Ich habe zwischendurch auch mal die Installation von pavucontrol probiert, weil das in einigen Fällen geholfen haben soll.
In KMix wird zwar die Karte als solches erkannt, aber ich kann keinen Kanal auswählen. in alsamixer kann ich die keine Lautstärke regeln, lediglich muten. Wenn ich einige Zeit mit alsamixer, kmix und weiteren Mixern oder Sound-Konfigurationen herumgespielt habe, dann erhalte ich nicht einmal mehr den Testsound bei Phonon auf meinem HDMI-Gerät... :-(
Hier die Daten zu meiner Sound-Hardware:
hwinfo erklärt mir:
Code:
37: PCI 400.1: 0403 Audio device
[Created at pci.319]
Unique ID: P5_H.UIF9T0IpkJC
Parent ID: 3hqH.Jw5chtlvkL9
SysFS ID: /devices/pci0000:00/0000:00:03.0/0000:04:00.1
SysFS BusID: 0000:04:00.1
Hardware Class: sound
Model: "nVidia Audio device"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0e08
Revision: 0xa1
Driver: "snd_hda_intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xfe97c000-0xfe97ffff (rw,non-prefetchable)
IRQ: 16 (1225 events)
Module Alias: "pci:v000010DEd00000E08sv00000000sd00000000bc04sc03i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=yes, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)
alsa-info.sh zeigt:
Code:
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.60
!!################################
!!Script ran on: Sun May 20 16:10:29 UTC 2012
!!Linux Distribution
!!------------------
Welcome to openSUSE 12.1 "Asparagus" - Kernel \r (\l). openSUSE 12.1 (x86_64) NAME=openSUSE PRETTY_NAME="openSUSE 12.1 (Asparagus) (x86_64)" ID=opensuse
!!DMI Information
!!---------------
Manufacturer: To Be Filled By O.E.M.
Product Name: To Be Filled By O.E.M.
Product Version: To Be Filled By O.E.M.
!!Kernel Information
!!------------------
Kernel release: 3.1.10-1.9-desktop
Operating System: GNU/Linux
Architecture: x86_64
Processor: x86_64
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.24
Library version:
Utilities version: 1.0.24.2
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfe97c000 irq 16
!!PCI Soundcards installed in the system
!!--------------------------------------
04:00.1 Audio device: nVidia Corporation HDMI Audio stub (rev a1)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!--------------------------------------------------------
04:00.1 0403: 10de:0e08 (rev a1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
!!Loaded sound module options
!!--------------------------
!!Module: snd_hda_intel
bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Nvidia GPU 1c HDMI/DP
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x10de001c
Subsystem Id: 0x00000000
Revision Id: 0x100100
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x04 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=04, enabled=1
Connection: 2
0x08* 0x09
Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=05, enabled=1
Connection: 2
0x08* 0x09
Node 0x06 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x585600f0: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Connection: 2
0x08* 0x09
Node 0x07 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x585600f0: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Connection: 2
0x08* 0x09
Node 0x08 [Audio Output] wcaps 0x62b1: 8-Channels Digital Stripe
Device: name="HDMI 1", type="HDMI", device=7
Converter: stream=5, channel=0
Digital: Enabled GenLevel
Digital category: 0x2
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Unsolicited: tag=00, enabled=0
Node 0x09 [Audio Output] wcaps 0x62b1: 8-Channels Digital Stripe
Converter: stream=0, channel=0
Digital: Enabled GenLevel
Digital category: 0x2
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Unsolicited: tag=00, enabled=0
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 5 May 20 17:36 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 4 May 20 17:36 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 3 May 20 17:36 /dev/snd/pcmC0D3p
crw-rw----+ 1 root audio 116, 2 May 20 17:48 /dev/snd/pcmC0D7p
crw-rw---- 1 root audio 116, 1 May 20 17:36 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 May 20 17:36 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 May 20 17:36 .
drwxr-xr-x 3 root root 180 May 20 17:36 ..
lrwxrwxrwx 1 root root 12 May 20 17:36 pci-0000:04:00.1 -> ../controlC0
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 0/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [NVidia]
Card hw:0 'NVidia'/'HDA NVidia at 0xfe97c000 irq 16'
Mixer name : 'Nvidia GPU 1c HDMI/DP'
Components : 'HDA:10de001c,00000000,00100100'
Controls : 8
Simple ctrls : 2
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
!!Alsactl output
!!-------------
--startcollapse--
state.NVidia {
control.1 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.2 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.3 {
iface MIXER
name 'IEC958 Playback Default'
value '0482000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.4 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.5 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.6 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.7 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0482000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.8 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
}
--endcollapse--
!!All Loaded Modules
!!------------------
Module
lp
parport_pc
ppdev
parport
edd
st
sr_mod
cdrom
af_packet
joydev
fuse
vboxpci
vboxnetadp
vboxnetflt
deflate
zlib_deflate
ctr
twofish_x86_64
twofish_common
camellia
serpent
blowfish
cast5
des_generic
cbc
xcbc
rmd160
sha512_generic
sha256_generic
vboxdrv
sha1_generic
md5
crypto_null
af_key
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
powernow_k8
mperf
microcode
nvidia
snd_hda_codec_hdmi
sp5100_tco
snd_hda_intel
snd_hda_codec
serio_raw
snd_hwdep
snd_pcm
firewire_ohci
r8169
sg
wmi
edac_core
firewire_core
edac_mce_amd
xhci_hcd
i2c_piix4
snd_timer
snd
pcspkr
button
k10temp
soundcore
crc_itu_t
snd_page_alloc
autofs4
fan
processor
thermal
thermal_sys
ata_generic
pata_atiixp
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:
0x04 0x185600f0
0x05 0x185600f0
0x06 0x585600f0
0x07 0x585600f0
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
!!ALSA/HDA dmesg
!!------------------
[ 10.663161] firewire_ohci: Added fw-ohci device 0000:03:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 10.892609] snd_hda_intel 0000:04:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 10.892613] hda_intel: Disabling MSI
[ 10.892649] snd_hda_intel 0000:04:00.1: setting latency timer to 64
[ 10.898143] ALSA hda_intel.c:1454 Enable delay in RIRB handling
[ 11.055619] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
--
[ 11.123726] ifup[688]: Service network not started and mode 'auto' -> skipping
[ 11.161056] HDMI status: Codec=0 Pin=4 Presence_Detect=0 ELD_Valid=0
[ 11.164199] firewire_core: created device fw0: GUID 008f13008ed70d00, S400
[ 11.185081] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 11.233246] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card0/input5
[ 11.233317] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card0/input6
[ 11.739120] nvidia: module license 'NVIDIA' taints kernel.
--
[ 20.660872] vboxpci: IOMMU not found (not registered)
[ 28.307193] HDMI hot plug event: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=0
[ 28.310064] HDMI status: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=0
[ 28.325998] HDMI hot plug event: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=1
[ 28.329063] HDMI status: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=1
[ 28.621114] HDMI: detected monitor HG216
[ 28.621118] at connection type HDMI
[ 28.621125] HDMI: available speakers: FL/FR
[ 28.621134] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16
[ 29.218080] eth0: no IPv6 routers present
--
[ 712.912125] fuse init (API version 7.17)
[ 714.884941] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 1559.905309] NET: Registered protocol family 17
Ich werde jetzt mal noch folgendes probieren:
Ich aktiviere wieder meine analoge onBoard-Soundkarte und schließe meinen Monitor per VGA an und schließe gleichzeitig das Soundkabel an den Monitor an, sodass nichts über HDMI läuft. Das Ergebnis kann ich aber erst morgen mitteilen. Diese Lösung wäre auch nur temporär und nicht auf Dauer für mich zu gebrauchen.
Viele Grüße
Andreas