• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Unbekannt Hardeware identifizieren "GELÖST"

Aethem

Aethem

Hallo Tuxer,

da ich aus der Windows Schiene kommen und mir Suse 11 installiert habe.

Möchte ich nun wissen, was unter Suse ein vergleichbarer Gerätemanager für Linux ist.
Bzw. Welche Geräte installiert sind und welche noch zu installieren sind (im Gerätemanager mit gelben Ausrufezeichen markiert)

Am liebsten wären mir konsolen befehle. da ich kein Gui freund bin.

Gruß

Aethem
 
W

whois

Hi

Hardware kannst du via Yast einrichten.
Da gibt es auch den Punkt Hardwareinformationen.

Welchen WM verwendest du denn KDE 3.x oder was anderes?
Da gibt es auch einen Punkt Hardware.

Wenn du in der Konsole bist kannst du als root den Befehl
Code: 
hwinfo
ausführen der zeigt dir auch alles.

cu
 
OP
Aethem

Aethem

danke für die info "hwinfo" und yast

ist ja alles schön aufgeführt.

Aber woran erkenne ich welche Hardware im Systemverbaut ist, aber noch nicht funktioniert da der Treiber fehlt?

ich hab mal meine hwinfo gepostet.
Evtl fällt euch ja etwas auf was nicht passt.

Code: 
  Attached to: #19 (PCI bridge)

13: PCI 201.0: 0607 CardBus bridge
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_1217_7135
  Unique ID: GA8e.EZVqJohAaY9
  Parent ID: 6NW+.WGY8iKV5q78
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:01.0
  SysFS BusID: 0000:02:01.0
  Hardware Class: bridge
  Model: "O2 Micro Cardbus bridge"
  Vendor: pci 0x1217 "O2 Micro, Inc."
  Device: pci 0x7135 "Cardbus bridge"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x01d4
  Revision: 0x21
  Driver: "yenta_cardbus"
  Driver Modules: "yenta_socket"
  Memory Range: 0xefc00000-0xefc00fff (rw,non-prefetchable)
  IRQ: 19 (10 events)
  Module Alias: "pci:v00001217d00007135sv00001028sd000001D4bc06sc07i00"
  Driver Info #0:
    Driver Status: yenta_socket is active
    Driver Activation Cmd: "modprobe yenta_socket"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #19 (PCI bridge)

14: PCI 200.0: 0200 Ethernet controller
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_14e4_170c
  Unique ID: rBUF.G2XJHwGqZ31
  Parent ID: 6NW+.WGY8iKV5q78
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: network
  Model: "Broadcom BCM4401-B0 100Base-TX"
  Vendor: pci 0x14e4 "Broadcom"
  Device: pci 0x170c "BCM4401-B0 100Base-TX"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x01d4
  Revision: 0x02
  Driver: "b44"
  Driver Modules: "ssb", "b44"
  Device File: eth0
  Memory Range: 0xefcfe000-0xefcfffff (rw,non-prefetchable)
  IRQ: 17 (no events)
  HW Address: 00:15:c5:c4:83:14
  Link detected: no
  Module Alias: "pci:v000014E4d0000170Csv00001028sd000001D4bc02sc00i00"
  Driver Info #0:
    Driver Status: b44 is active
    Driver Activation Cmd: "modprobe b44"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #19 (PCI bridge)

15: PCI c00.0: 0282 WLAN controller
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_8086_4222
  Unique ID: y9sn.R_3Xvz9I_k9
  Parent ID: qTvu.4chw4Z9dkyF
  SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0
  SysFS BusID: 0000:0c:00.0
  Hardware Class: network
  Model: "Intel PRO/Wireless 3945ABG Network Connection"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x4222 "PRO/Wireless 3945ABG Network Connection"
  SubVendor: pci 0x8086 "Intel Corporation"
  SubDevice: pci 0x1021
  Revision: 0x02
  Driver: "iwl3945"
  Driver Modules: "iwl3945"
  Device File: wlan0
  Features: WLAN
  Memory Range: 0xefdff000-0xefdfffff (rw,non-prefetchable)
  IRQ: 221 (6208 events)
  HW Address: 00:18:de:d8:f7:3b
  Link detected: yes
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 34 36 38 40 42 44 46 48 52 56 60
64 100 104 108 112 116 120 124
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457
2.462 2.467 2.472 5.17 5.18 5.19 5.2 5.21 5.22 5.23 5.24 5.26 5.28 5.3 5.32 5.5
5.52 5.54 5.56 5.58 5.6 5.62
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "pci:v00008086d00004222sv00008086sd00001021bc02sc80i00"
  Driver Info #0:
    Driver Status: iwl3945 is active
    Driver Activation Cmd: "modprobe iwl3945"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #25 (PCI bridge)

16: PCI 1f.3: 0c05 SMBus
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_8086_27da
  Unique ID: nS1_.gh+FhDyV1qA
  SysFS ID: /devices/pci0000:00/0000:00:1f.3
  SysFS BusID: 0000:00:1f.3
  Hardware Class: unknown
  Model: "Intel 82801G (ICH7 Family) SMBus Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27da "82801G (ICH7 Family) SMBus Controller"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x01d4
  Revision: 0x01
  Driver: "i801_smbus"
  Driver Modules: "i2c_i801"
  I/O Ports: 0x10c0-0x10df (rw)
  IRQ: 17 (no events)
  Module Alias: "pci:v00008086d000027DAsv00001028sd000001D4bc0Csc05i00"
  Driver Info #0:
    Driver Status: i2c_i801 is active
    Driver Activation Cmd: "modprobe i2c_i801"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

17: PCI 1f.2: 0101 IDE interface
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_8086_27c4
  Unique ID: w7Y8.5RlbYu4stX4
  SysFS ID: /devices/pci0000:00/0000:00:1f.2
  SysFS BusID: 0000:00:1f.2
  Hardware Class: storage
  Model: "Intel 82801GBM/GHM (ICH7 Family) SATA IDE Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27c4 "82801GBM/GHM (ICH7 Family) SATA IDE Controller"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x01d4
  Revision: 0x01
  Driver: "ata_piix"
  Driver Modules: "ata_piix"
  I/O Ports: 0x1f0-0x1f7 (rw)
  I/O Port: 0x3f6 (rw)
  I/O Ports: 0x170-0x177 (rw)
  I/O Port: 0x376 (rw)
  I/O Ports: 0xbfa0-0xbfaf (rw)
  IRQ: 17 (no events)
  Module Alias: "pci:v00008086d000027C4sv00001028sd000001D4bc01sc01i80"
  Driver Info #0:
    Driver Status: ata_piix is active
    Driver Activation Cmd: "modprobe ata_piix"
  Driver Info #1:
    Driver Status: pata_acpi is not active
    Driver Activation Cmd: "modprobe pata_acpi"
  Driver Info #2:
    Driver Status: ata_generic is not active
    Driver Activation Cmd: "modprobe ata_generic"
  Driver Info #3:
    Driver Status: ide_pci_generic is not active
    Driver Activation Cmd: "modprobe ide_pci_generic"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

18: PCI 1f.0: 0601 ISA bridge
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_8086_27b9
  Unique ID: BUZT.VGmCijJJBy9
  SysFS ID: /devices/pci0000:00/0000:00:1f.0
  SysFS BusID: 0000:00:1f.0
  Hardware Class: bridge
  Model: "Intel 82801GBM (ICH7-M) LPC Interface Bridge"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27b9 "82801GBM (ICH7-M) LPC Interface Bridge"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x01d4
  Revision: 0x01
  Module Alias: "pci:v00008086d000027B9sv00001028sd000001D4bc06sc01i00"
  Driver Info #0:
    Driver Status: iTCO_wdt is active
    Driver Activation Cmd: "modprobe iTCO_wdt"
  Driver Info #1:
    Driver Status: intel_rng is not active
    Driver Activation Cmd: "modprobe intel_rng"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

19: PCI 1e.0: 0604 PCI bridge (Subtractive decode)
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2448
  Unique ID: 6NW+.WGY8iKV5q78
  SysFS ID: /devices/pci0000:00/0000:00:1e.0
  SysFS BusID: 0000:00:1e.0
  Hardware Class: bridge
  Model: "Intel 82801 Mobile PCI Bridge"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2448 "82801 Mobile PCI Bridge"
  Revision: 0xe1
  Module Alias: "pci:v00008086d00002448sv00000000sd00000000bc06sc04i01"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

20: PCI 1d.7: 0c03 USB Controller (EHCI)
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_8086_27cc
  Unique ID: 5YuN.wTVXjpQ3nTD
  SysFS ID: /devices/pci0000:00/0000:00:1d.7
  SysFS BusID: 0000:00:1d.7
  Hardware Class: usb controller
  Model: "Intel 82801G (ICH7 Family) USB2 EHCI Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27cc "82801G (ICH7 Family) USB2 EHCI Controller"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x01d4
  Revision: 0x01
  Driver: "ehci_hcd"
  Driver Modules: "ehci_hcd"
  Memory Range: 0xffa80000-0xffa803ff (rw,non-prefetchable)
  IRQ: 20 (28 events)
  Module Alias: "pci:v00008086d000027CCsv00001028sd000001D4bc0Csc03i20"
  Driver Info #0:
    Driver Status: ehci-hcd is active
    Driver Activation Cmd: "modprobe ehci-hcd"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

21: PCI 1d.3: 0c03 USB Controller (UHCI)
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_8086_27cb
  Unique ID: eEx1.v2zbyAqbjF8
  SysFS ID: /devices/pci0000:00/0000:00:1d.3
  SysFS BusID: 0000:00:1d.3
  Hardware Class: usb controller
  Model: "Intel 82801G (ICH7 Family) USB UHCI Controller #4"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27cb "82801G (ICH7 Family) USB UHCI Controller #4"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x01d4
  Revision: 0x01
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0xbf20-0xbf3f (rw)
  IRQ: 23 (no events)
  Module Alias: "pci:v00008086d000027CBsv00001028sd000001D4bc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

22: PCI 1d.2: 0c03 USB Controller (UHCI)
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_8086_27ca
  Unique ID: mvRC.Oe0sTciuBt7
  SysFS ID: /devices/pci0000:00/0000:00:1d.2
  SysFS BusID: 0000:00:1d.2
  Hardware Class: usb controller
  Model: "Intel 82801G (ICH7 Family) USB UHCI Controller #3"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27ca "82801G (ICH7 Family) USB UHCI Controller #3"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x01d4
  Revision: 0x01
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0xbf40-0xbf5f (rw)
  IRQ: 22 (no events)
  Module Alias: "pci:v00008086d000027CAsv00001028sd000001D4bc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

23: PCI 1d.1: 0c03 USB Controller (UHCI)
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_8086_27c9
  Unique ID: vayM.tD46+1bBgU7
  SysFS ID: /devices/pci0000:00/0000:00:1d.1
  SysFS BusID: 0000:00:1d.1
  Hardware Class: usb controller
  Model: "Intel 82801G (ICH7 Family) USB UHCI Controller #2"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27c9 "82801G (ICH7 Family) USB UHCI Controller #2"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x01d4
  Revision: 0x01
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0xbf60-0xbf7f (rw)
  IRQ: 21 (844 events)
  Module Alias: "pci:v00008086d000027C9sv00001028sd000001D4bc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

24: PCI 1d.0: 0c03 USB Controller (UHCI)
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_8086_27c8
  Unique ID: 1GTX.Mp7MWTTU867
  SysFS ID: /devices/pci0000:00/0000:00:1d.0
  SysFS BusID: 0000:00:1d.0
  Hardware Class: usb controller
  Model: "Intel 82801G (ICH7 Family) USB UHCI Controller #1"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27c8 "82801G (ICH7 Family) USB UHCI Controller #1"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x01d4
  Revision: 0x01
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0xbf80-0xbf9f (rw)
  IRQ: 20 (28 events)
  Module Alias: "pci:v00008086d000027C8sv00001028sd000001D4bc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

25: PCI 1c.1: 0604 PCI bridge (Normal decode)
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_8086_27d2
  Unique ID: qTvu.4chw4Z9dkyF
  SysFS ID: /devices/pci0000:00/0000:00:1c.1
  SysFS BusID: 0000:00:1c.1
  Hardware Class: bridge
  Model: "Intel 82801G (ICH7 Family) PCI Express Port 2"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27d2 "82801G (ICH7 Family) PCI Express Port 2"
  Revision: 0x01
  Driver: "pcieport-driver"
  IRQ: 222 (no events)
  Module Alias: "pci:v00008086d000027D2sv00000000sd00000000bc06sc04i00"
  Driver Info #0:
    Driver Status: shpchp is not active
    Driver Activation Cmd: "modprobe shpchp"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

26: PCI 1c.0: 0604 PCI bridge (Normal decode)
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_8086_27d0
  Unique ID: z8Q3.2noQ7QwChBF
  SysFS ID: /devices/pci0000:00/0000:00:1c.0
  SysFS BusID: 0000:00:1c.0
  Hardware Class: bridge
  Model: "Intel 82801G (ICH7 Family) PCI Express Port 1"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27d0 "82801G (ICH7 Family) PCI Express Port 1"
  Revision: 0x01
  Driver: "pcieport-driver"
  IRQ: 223 (no events)
  Module Alias: "pci:v00008086d000027D0sv00000000sd00000000bc06sc04i00"
  Driver Info #0:
    Driver Status: shpchp is not active
    Driver Activation Cmd: "modprobe shpchp"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

27: PCI 1b.0: 0403 Audio device
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_8086_27d8
  Unique ID: u1Nb.UZo05LY+1GA
  SysFS ID: /devices/pci0000:00/0000:00:1b.0
  SysFS BusID: 0000:00:1b.0
  Hardware Class: sound
  Model: "Intel 82801G (ICH7 Family) High Definition Audio Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27d8 "82801G (ICH7 Family) High Definition Audio Controller"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x01d4
  Revision: 0x01
  Driver: "HDA Intel"
  Driver Modules: "snd_hda_intel"
  Memory Range: 0xefebc000-0xefebffff (rw,non-prefetchable)
  IRQ: 21 (844 events)
  Module Alias: "pci:v00008086d000027D8sv00001028sd000001D4bc04sc03i00"
  Driver Info #0:
    Driver Status: snd_hda_intel is active
    Driver Activation Cmd: "modprobe snd_hda_intel"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

28: PCI 02.1: 0380 Display controller
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_8086_27a6
  Unique ID: ruGf.APuZnyaq6j5
  SysFS ID: /devices/pci0000:00/0000:00:02.1
  SysFS BusID: 0000:00:02.1
  Hardware Class: graphics card
  Model: "Intel Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Con
troller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27a6 "Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphi
cs Controller"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x01d4
  Revision: 0x03
  Memory Range: 0xeff80000-0xefffffff (rw,non-prefetchable)
  Module Alias: "pci:v00008086d000027A6sv00001028sd000001D4bc03sc80i00"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

29: PCI 02.0: 0300 VGA compatible controller (VGA)
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_8086_27a2
  Unique ID: _Znp.6jhhRPx2GyE
  SysFS ID: /devices/pci0000:00/0000:00:02.0
  SysFS BusID: 0000:00:02.0
  Hardware Class: graphics card
  Model: "Intel 945 GM"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27a2 "945 GM"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x01d4
  Revision: 0x03
  Memory Range: 0xeff00000-0xeff7ffff (rw,non-prefetchable)
  I/O Ports: 0xeff8-0xefff (rw)
  Memory Range: 0xd0000000-0xdfffffff (rw,prefetchable)
  Memory Range: 0xefec0000-0xefefffff (rw,non-prefetchable)
  IRQ: 16 (no events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v00008086d000027A2sv00001028sd000001D4bc03sc00i00"
  Driver Info #0:
    XFree86 v4 Server Module: intel
  Driver Info #1:
    XFree86 v4 Server Module: intel
    3D Support: yes
    Extensions: dri
  Config Status: cfg=no, avail=yes, need=no, active=unknown

30: PCI 00.0: 0600 Host bridge
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_8086_27a0
  Unique ID: qLht.7LTx05OOXm2
  SysFS ID: /devices/pci0000:00/0000:00:00.0
  SysFS BusID: 0000:00:00.0
  Hardware Class: bridge
  Model: "Intel Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Control
ler Hub"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x27a0 "Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory C
ontroller Hub"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x01d4
  Revision: 0x03
  Driver: "agpgart-intel"
  Driver Modules: "intel_agp"
  Module Alias: "pci:v00008086d000027A0sv00001028sd000001D4bc06sc00i00"
  Driver Info #0:
    Driver Status: intel_agp is active
    Driver Activation Cmd: "modprobe intel_agp"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

31: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501
  Unique ID: cqY2.BuKI+1soRmD
  SysFS ID: /devices/pnp0/00:0c
  SysFS BusID: 00:0c
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0501
  Config Status: cfg=no, avail=yes, need=no, active=unknown

32: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0103
  Unique ID: 9fI_.fG36JLVNse9
  SysFS ID: /devices/pnp0/00:0b
  SysFS BusID: 00:0b
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0103
  Config Status: cfg=no, avail=yes, need=no, active=unknown

33: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c04
  Unique ID: iT2w.DE8RM9cWQQ8
  SysFS ID: /devices/pnp0/00:0a
  SysFS BusID: 00:0a
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0c04
  Config Status: cfg=no, avail=yes, need=no, active=unknown

34: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0200
  Unique ID: H20r.ld94kxNGZf5
  SysFS ID: /devices/pnp0/00:09
  SysFS BusID: 00:09
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0200
  Config Status: cfg=no, avail=yes, need=no, active=unknown

35: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c01_2
  Unique ID: qslm.gNN83gfynbD
  SysFS ID: /devices/pnp0/00:08
  SysFS BusID: 00:08
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0c01
  Config Status: cfg=no, avail=yes, need=no, active=unknown

36: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0800
  Unique ID: NhVi.bvKf3UMzZfE
  SysFS ID: /devices/pnp0/00:07
  SysFS BusID: 00:07
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0800
  Config Status: cfg=no, avail=yes, need=no, active=unknown

37: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0b00
  Unique ID: hEKD.WYwRElrJa93
  SysFS ID: /devices/pnp0/00:06
  SysFS BusID: 00:06
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0b00
  Config Status: cfg=no, avail=yes, need=no, active=unknown

38: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0303
  Unique ID: E349.xhndlW9HXJ7
  SysFS ID: /devices/pnp0/00:05
  SysFS BusID: 00:05
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0303
  Config Status: cfg=no, avail=yes, need=no, active=unknown

39: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0f13
  Unique ID: ntp4.t7Yh1tpgb13
  SysFS ID: /devices/pnp0/00:04
  SysFS BusID: 00:04
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0f13
  Config Status: cfg=no, avail=yes, need=no, active=unknown

40: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c01_1
  Unique ID: KiZ0.gNN83gfynbD
  SysFS ID: /devices/pnp0/00:03
  SysFS BusID: 00:03
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0c01
  Config Status: cfg=no, avail=yes, need=no, active=unknown

41: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c01_0
  Unique ID: tWJy.gNN83gfynbD
  SysFS ID: /devices/pnp0/00:02
  SysFS BusID: 00:02
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0c01
  Config Status: cfg=no, avail=yes, need=no, active=unknown

42: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0a03
  Unique ID: QL3u.QBqTp8zQt87
  SysFS ID: /devices/pnp0/00:01
  SysFS BusID: 00:01
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0a03
  Config Status: cfg=no, avail=yes, need=no, active=unknown

43: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c01
  Unique ID: z9pp.gNN83gfynbD
  SysFS ID: /devices/pnp0/00:00
  SysFS BusID: 00:00
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0c01
  Config Status: cfg=no, avail=yes, need=no, active=unknown

44: None 00.0: 0700 Serial controller (16550)
  [Created at serial.74]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0
  Unique ID: S_Uw.3fyvFV+mbWD
  Hardware Class: unknown
  Model: "16550A"
  Device: "16550A"
  Device File: /dev/ttyS0
  I/O Ports: 0x3f8-0x3ff (rw)
  IRQ: 4 (6 events)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

45: SCSI 100.0: 10602 CD-ROM (DVD)
  [Created at block.238]
  UDI: /org/freedesktop/Hal/devices/storage_model_CDRWDVD_CRX880A
  Unique ID: KD9E.kcu5xDP5Qu6
  Parent ID: w7Y8.5RlbYu4stX4
  SysFS ID: /class/block/sr0
  SysFS BusID: 1:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0
  Hardware Class: cdrom
  Model: "SONY CDRWDVD CRX880A"
  Vendor: "SONY"
  Device: "CDRWDVD CRX880A"
  Revision: "KD08"
  Driver: "ata_piix", "sr"
  Driver Modules: "ata_piix"
  Device File: /dev/sr0 (/dev/sg1)
  Device Files: /dev/sr0, /dev/scd0, /dev/disk/by-path/pci-0000:00:1f.2-scsi-1:0
:0:0, /dev/cdrom, /dev/cdrw, /dev/dvd
  Device Number: block 11:0 (char 21:1)
  Features: CD-R, CD-RW, DVD
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #17 (IDE interface)
  Drive Speed: 24
  Volume ID: "SU1100.001"
  Application: "openSUSE-DVD-11.0#0"
  Publisher: "Novell, Inc."
  Preparer: "CD-Team, http://bugs.opensuse.org/"
  Creation date: "2008061017282100"
  El Torito info: platform 0, bootable
    Boot Catalog: at sector 0x0235
    Id String: "Novell, Inc."
    Media: none starting at sector 0x0236
    Load: 2048 bytes

46: IDE 00.0: 10600 Disk
  [Created at block.234]
  UDI: /org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HM060HI_S0BNJ10L
B41838
  Unique ID: 3OOL.L5Su5NjVGE8
  Parent ID: w7Y8.5RlbYu4stX4
  SysFS ID: /class/block/sda
  SysFS BusID: 0:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0
  Hardware Class: disk
  Model: "SAMSUNG HM060HI"
  Vendor: "SAMSUNG"
  Device: "HM060HI"
  Revision: "YD10"
  Serial ID: "S0BNJ10LB41838"
  Driver: "ata_piix", "sd"
  Driver Modules: "ata_piix"
  Device File: /dev/sda
  Device Files: /dev/sda, /dev/disk/by-id/scsi-SATA_SAMSUNG_HM060HI_S0BNJ10LB418
38, /dev/disk/by-id/ata-SAMSUNG_HM060HI_S0BNJ10LB41838, /dev/disk/by-path/pci-00
00:00:1f.2-scsi-0:0:0:0, /dev/disk/by-id/edd-int13_dev80
  Device Number: block 8:0-8:15
  BIOS id: 0x80
  Geometry (Logical): CHS 7296/255/63
  Size: 117210240 sectors a 512 bytes
  Geometry (BIOS EDD): CHS 116280/16/63
  Size (BIOS EDD): 117210240 sectors
  Geometry (BIOS Legacy): CHS 1024/255/63
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #17 (IDE interface)

47: None 00.0: 11300 Partition
  [Created at block.403]
  UDI: /org/freedesktop/Hal/devices/volume_uuid_260e0433_996f_4550_8c25_e3ccdec1
93e8
  Unique ID: bdUI.SE1wIdpsiiC
  Parent ID: 3OOL.L5Su5NjVGE8
  SysFS ID: /class/block/sda/sda1
  Hardware Class: partition
  Model: "Partition"
  Device File: /dev/sda1
  Device Files: /dev/sda1, /dev/disk/by-id/scsi-SATA_SAMSUNG_HM060HI_S0BNJ10LB41
838-part1, /dev/disk/by-id/ata-SAMSUNG_HM060HI_S0BNJ10LB41838-part1, /dev/disk/b
y-path/pci-0000:00:1f.2-scsi-0:0:0:0-part1, /dev/disk/by-uuid/260e0433-996f-4550
-8c25-e3ccdec193e8, /dev/disk/by-id/edd-int13_dev80-part1
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #46 (Disk)

48: None 00.0: 11300 Partition
  [Created at block.403]
  UDI: /org/freedesktop/Hal/devices/volume_uuid_fe7e6a16_1147_414f_928d_ef630da4
f03a
  Unique ID: 2pkM.SE1wIdpsiiC
  Parent ID: 3OOL.L5Su5NjVGE8
  SysFS ID: /class/block/sda/sda2
  Hardware Class: partition
  Model: "Partition"
  Device File: /dev/sda2
  Device Files: /dev/sda2, /dev/disk/by-id/scsi-SATA_SAMSUNG_HM060HI_S0BNJ10LB41
838-part2, /dev/disk/by-id/ata-SAMSUNG_HM060HI_S0BNJ10LB41838-part2, /dev/disk/b
y-path/pci-0000:00:1f.2-scsi-0:0:0:0-part2, /dev/disk/by-uuid/fe7e6a16-1147-414f
-928d-ef630da4f03a, /dev/disk/by-id/edd-int13_dev80-part2
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #46 (Disk)

49: None 00.0: 11300 Partition
  [Created at block.403]
  UDI: /org/freedesktop/Hal/devices/volume_uuid_6e787996_4f92_4729_b616_8c548e12
ae79
  Unique ID: W__Q.SE1wIdpsiiC
  Parent ID: 3OOL.L5Su5NjVGE8
  SysFS ID: /class/block/sda/sda3
  Hardware Class: partition
  Model: "Partition"
  Device File: /dev/sda3
  Device Files: /dev/sda3, /dev/disk/by-id/scsi-SATA_SAMSUNG_HM060HI_S0BNJ10LB41
838-part3, /dev/disk/by-id/ata-SAMSUNG_HM060HI_S0BNJ10LB41838-part3, /dev/disk/b
y-path/pci-0000:00:1f.2-scsi-0:0:0:0-part3, /dev/disk/by-uuid/6e787996-4f92-4729
-b616-8c548e12ae79, /dev/disk/by-id/edd-int13_dev80-part3
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #46 (Disk)

50: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0
  Unique ID: 2XnU.CCckIHJirFC
  Parent ID: eEx1.v2zbyAqbjF8
  SysFS ID: /devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0
  SysFS BusID: 5-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.25.18-0.2-pae uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.25.18-0.2-pae uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.3"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #21 (USB Controller)

51: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0
  Unique ID: zPk0.RTX9xWW_uz4
  Parent ID: mvRC.Oe0sTciuBt7
  SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0
  SysFS BusID: 4-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.25.18-0.2-pae uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.25.18-0.2-pae uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.2"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #22 (USB Controller)

52: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_413c_a005_noserial_if0
  Unique ID: cLrx.Zr++dp7l7yB
  Parent ID: k4bc.9T1GDCLyFd9
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0
  SysFS BusID: 1-2:1.0
  Hardware Class: hub
  Model: "Dell Hub"
  Hotplug: USB
  Vendor: usb 0x413c "Dell Computer Corp."
  Device: usb 0xa005
  Revision: "50.18"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 480 Mbps
  Module Alias: "usb:v413CpA005d5018dc09dsc00dp02ic09isc00ip02"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #55 (Hub)

53: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0
  Unique ID: uIhY.gkSaZmjGyhD
  Parent ID: vayM.tD46+1bBgU7
  SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0
  SysFS BusID: 3-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.25.18-0.2-pae uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.25.18-0.2-pae uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.1"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #23 (USB Controller)

54: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0
  Unique ID: pBe4.v+N+B0xY+P6
  Parent ID: 1GTX.Mp7MWTTU867
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0
  SysFS BusID: 2-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.25.18-0.2-pae uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.25.18-0.2-pae uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.0"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #24 (USB Controller)

55: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0
  Unique ID: k4bc.9T1GDCLyFd9
  Parent ID: 5YuN.wTVXjpQ3nTD
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0
  SysFS BusID: 1-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.25.18-0.2-pae ehci_hcd EHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.25.18-0.2-pae ehci_hcd"
  Device: usb 0x0002 "EHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.7"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 480 Mbps
  Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp01ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #20 (USB Controller)

56: PS/2 00.0: 10800 Keyboard
  [Created at input.161]
  UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_inp
ut
  Unique ID: nLyy.+49ps10DtUF
  Hardware Class: keyboard
  Model: "AT Translated Set 2 keyboard"
  Vendor: 0x0001
  Device: 0x0001 "AT Translated Set 2 keyboard"
  Compatible to: int 0x0211 0x0001
  Device File: /dev/input/event0
  Device Files: /dev/input/event0, /dev/input/by-path/platform-i8042-serio-0-eve
nt-kbd
  Device Number: char 13:64
  Driver Info #0:
    XkbRules: xfree86
    XkbModel: pc104
  Config Status: cfg=no, avail=yes, need=no, active=unknown

57: PS/2 00.0: 10500 PS/2 Mouse
  [Created at input.183]
  UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_inp
ut
  Unique ID: AH6Q.5+smWHVjPI3
  Hardware Class: mouse
  Model: "PS/2 Mouse"
  Vendor: 0x0002
  Device: 0x0008 "PS/2 Mouse"
  Compatible to: int 0x0210 0x0003
  Device File: /dev/input/mice (/dev/input/mouse0)
  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2, /dev/inpu
t/by-path/platform-i8042-serio-1-event-mouse, /dev/input/by-path/platform-i8042-
serio-1-mouse
  Device Number: char 13:63 (char 13:32)
  Driver Info #0:
    Buttons: 3
    Wheels: 0
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=no, avail=yes, need=no, active=unknown

58: PS/2 00.0: 10500 PS/2 Mouse
  [Created at input.183]
  UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_inp
ut_0
  Unique ID: AH6Q.5+smWHVjPI3
  Hardware Class: mouse
  Model: "AlpsPS/2 ALPS GlidePoint"
  Vendor: 0x0002
  Device: 0x0008 "AlpsPS/2 ALPS GlidePoint"
  Compatible to: int 0x0210 0x0003
  Device File: /dev/input/mice (/dev/input/mouse1)
  Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event3, /dev/inpu
t/by-path/platform-i8042-serio-1-event-mouse, /dev/input/by-path/platform-i8042-
serio-1-mouse
  Device Number: char 13:63 (char 13:33)
  Driver Info #0:
    Buttons: 3
    Wheels: 0
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=no, avail=yes, need=no, active=unknown

59: None 00.0: 10103 CPU
  [Created at cpu.301]
  Unique ID: rdCR.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: Intel
  Vendor: "GenuineIntel"
  Model: 6.15.6 "Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz"
  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,ps
e36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,nx,lm,constant_tsc,arch_perf
mon,pebs,bts,pni,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,lahf_lm
  Clock: 1000 MHz
  BogoMips: 4000.36
  Cache: 4096 kb
  Units/Processor: 2
  Config Status: cfg=no, avail=yes, need=no, active=unknown

60: None 01.0: 10103 CPU
  [Created at cpu.301]
  Unique ID: wkFv.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: Intel
  Vendor: "GenuineIntel"
  Model: 6.15.6 "Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz"
  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,ps
e36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,nx,lm,constant_tsc,arch_perf
mon,pebs,bts,pni,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,lahf_lm
  Clock: 1000 MHz
  BogoMips: 3994.71
  Cache: 4096 kb
  Units/Processor: 2
  Config Status: cfg=no, avail=yes, need=no, active=unknown

61: None 00.0: 10000 Monitor
  [Created at fb.71]
  Unique ID: rdCR.EY_qmtb9YY0
  Hardware Class: monitor
  Model: "Generic Monitor"
  Vendor: "Generic"
  Device: "Monitor"
  Resolution: 800x600@75Hz
  Driver Info #0:
    Max. Resolution: 800x600
    Vert. Sync Range: 50-90 Hz
    Hor. Sync Range: 31-48 kHz
  Config Status: cfg=new, avail=yes, need=no, active=unknown

62: None 00.0: 1070a WLAN
  [Created at net.124]
  Unique ID: AYEt.QXn1l67RSa1
  Parent ID: y9sn.R_3Xvz9I_k9
  SysFS ID: /class/net/wlan0
  SysFS Device Link: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0
  Hardware Class: network interface
  Model: "WLAN network interface"
  Driver: "iwl3945"
  Driver Modules: "iwl3945"
  Device File: wlan0
  HW Address: 00:18:de:d8:f7:3b
  Link detected: yes
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #15 (WLAN controller)

63: None 00.0: 10780 Network Interface
  [Created at net.124]
  Unique ID: agy+.GSopYcFr9cF
  SysFS ID: /class/net/wmaster0
  SysFS Device Link: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0
  Hardware Class: network interface
  Model: "Network Interface"
  Driver: "iwl3945"
  Driver Modules: "iwl3945"
  Device File: wmaster0
  HW Address: 00:18:de:d8:f7:3b
  Link detected: yes
  Config Status: cfg=no, avail=yes, need=no, active=unknown

64: None 00.0: 10701 Ethernet
  [Created at net.124]
  Unique ID: usDW.ndpeucax6V1
  Parent ID: rBUF.G2XJHwGqZ31
  SysFS ID: /class/net/eth0
  SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:02:00.0/ssb0:0
  Hardware Class: network interface
  Model: "Ethernet network interface"
  Driver: "b44"
  Driver Modules: "ssb", "b44"
  Device File: eth0
  HW Address: 00:15:c5:c4:83:14
  Link detected: no
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #14 (Ethernet controller)

65: None 00.0: 10700 Loopback
  [Created at net.124]
  Unique ID: ZsBS.GQNx7L4uPNA
  SysFS ID: /class/net/lo
  Hardware Class: network interface
  Model: "Loopback network interface"
  Device File: lo
  Link detected: yes
  Config Status: cfg=no, avail=yes, need=no, active=unknown

//Edit vom Mod: Bitte [ code ] Tags verwenden!
 
G

Grothesk

Aber woran erkenne ich welche Hardware im Systemverbaut ist, aber noch nicht funktioniert da der Treiber fehlt?
Zum Vergrößern anklicken....
Daran, dass sie nicht funktioniert? 'Gelbe Ausrufezeichen' gibt es jedenfalls keine.
Das meiste wird ohnehin erkannt. Und was nicht funktioniert merkt man ja wohl irgendwann.
 
OP
Aethem

Aethem

Versteht mich nicht falsch. Ich möchte Linux administrieren können. Es geht hier nicht um den einen PC (post von hwinfo), sondern um zukünftige Geräte.
Ich finde es wichtig zu wissen ob die Hardware richtig installiert ist um Problem auszuschließen.
Wenn es keinen Info´s gibt was installiert ist muss ich wohl damit leben. Wundert mich allerdings schon.

Gruß

Aethem
 
nbkr

nbkr

Im Gegensatz zu Windows, liefert Linux die Treiber die es gibt im allgemeinen mit. Die gelben Ausrufezeichen deuten bei Windows meist auf fehlende Treiber oder Resourcenkonflikte hin. Wenn es für ein Gerät keinen Treiber gibt, funktioniert es einfach nicht. Über hwinfo, lspci und lsusb kannst Du abfragen was für Geräte gefunden wurden. Bei unbekannten Geräten wirft hwinfo gerne ein "unkown" aus und lspci kann dir keinen Namen dazu liefern. Darüber ob das Gerät funktioniert oder nicht, sagt das aber nicht zwangsläufig was aus.

Hier mal ein Beispiel eines Gerätes das nicht funktioniert. Das dürfte mein Modem im Notebook sein.
Code: 
45: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c01
  Unique ID: z9pp.gNN83gfynbD
  SysFS ID: /devices/pnp0/00:00
  SysFS BusID: 00:00
  Hardware Class: unknown
  Model: "PnP Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0c01
  Config Status: cfg=new, avail=yes, need=no, active=unknown

Wenn Du Linux administrieren können willst und dass nicht nur über Erfahrung lernen willst, empfehle ich dir die LPI zu machen. Da bekommt man einen schönen Überblick.
 
OP
Aethem

Aethem

hallo nbkr,

super klare Info, danke.

Jetzt kann ich in etwa abschätzen, ob unbekannte Geräte im System sind.

Zum LPI: Ich hab derzeit eine Schulung über Linux, diese ist allerdings nicht der LPI.

Gruß

Aethem
 
nbkr

nbkr

LPI ist kein Kurs, sondern ein Institut. Das Linux Professional Institute. Das vergibt Zertifizierungen - wenn man entsprechende Prüfungen besteht. Es wird in der Wirtschaft gut anerkannt, da es Distributionsunabhängig ist. Mehr dazu in der Wikipedia.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben