-
Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.
[gelöst]AVM WLAN Stick N und openSuSE 12.1 (ich verzweifel)
- Ersteller JamesBrown
- Erstellt am
OP
JamesBrown
Newbie
so, hier nun die Werte:
ifconfig wlan0
Und nochmal die Ausgabe des Scriptes:
[/code]
Und die Ausgabe von:
Zypper se -si network
ifconfig wlan0
Code:
wlan0 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::be05:43ff:fe01:c42c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:851 errors:0 dropped:0 overruns:0 frame:0
TX packets:818 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:812502 (793.4 Kb) TX bytes:142621 (139.2 Kb)Und nochmal die Ausgabe des Scriptes:
Code:
[code]
collectNWData.sh V0.6.5.4.7-1 (Rev: 1.303, Build: 2011-12-16 22:51:41 UTC)
--- Which type of your network connection should be tested?
--- (2) Wireless connection (WLAN)
--- What's the type of networktopology?
--- (2) WLAN HW router <---> LinuxClient
--- On which host is the script executed?
--- (1) LinuxClient
--- WLAN SSID to connect to: §§§§§§§§1
--- NWEliza is analyzing the system for common network configuration errors ...
!!! CND0500W: Channel 1 used by your accesspoint is also used by 1 other access points
!!! CND0450W: WLAN key masquerading is not fully tested on this distribution. Please check output file collectNWData.txt for visible WLAN keys and masquerade them manually
--- Go to http://www.linux-tips-and-tricks.de/CND#English to get more detailed instructions
--- about the error/warning messages and how to fix the problems on your own.
--- If you are unsuccessful then place the contents of file collectNWData.txt in the net
--- (see http://www.linux-tips-and-tricks.de/CND_UPL#English for links)
--- and then paste the nopaste link on your favorite Linux forum.
==================================================================================================================
===== cat /etc/*[-_]release || cat /etc/*[-_]version =============================================================
/etc/SuSE-release
/etc/os-release
openSUSE 12.1 (x86_64)
VERSION = 12.1
CODENAME = Asparagus
NAME=openSUSE
VERSION = 12.1 (Asparagus)
VERSION_ID="12.1"
PRETTY_NAME="openSUSE 12.1 (Asparagus) (x86_64)"
ID=opensuse
===== uname -a ===================================================================================================
Linux linux-tjup 3.1.0-1.2-desktop #1 SMP PREEMPT Thu Nov 3 14:45:45 UTC 2011 (187dde0) x86_64 x86_64 x86_64 GNU/Linux
===== lspci ======================================================================================================
03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12)
Subsystem: ASUSTeK Computer Inc. Device [1043:81f8]
Kernel driver in use: sky2
===== lsusb | grep -v "root hub" =================================================================================
Bus 002 Device 004: ID 057c:8401 AVM GmbH AVM Fritz!WLAN N [Atheros AR9001U]
Bus 006 Device 002: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1
Bus 007 Device 002: ID 060c:04eb EEH Datalink GmbH
===== lsmod (filtered) ===========================================================================================
| af_packet | arc4 | asus_atk0110 | ath | carl9170 |
| cfg80211 | drm | drm_kms_helper | i2c_algo_bit | i2c_i801 |
| ip_tables | mac80211 | microcode | mperf | radeon |
| rfkill | serio_raw | sg | sky2 | sr_mod |
| ttm |
===== ls /lib/firmware/* =========================================================================================
| 3.1.0-1.2-default | 3.1.0-1.2-desktop | 3com | GPL-3 |
| LICENCE.Marvell | LICENCE.OLPC | LICENCE.agere | LICENCE.atheros_firmware |
| LICENCE.broadcom_bcm43xx| LICENCE.chelsio_firmware| LICENCE.ene_firmware | LICENCE.i2400m |
| LICENCE.iwlwifi_firmware| LICENCE.mwl8335 | LICENCE.myri10ge_firmware| LICENCE.phanfw |
| LICENCE.qla2xxx | LICENCE.ralink-firmware.txt| LICENCE.rtlwifi_firmware.txt| LICENCE.tda7706-firmware.txt |
| LICENCE.ti-connectivity | LICENCE.ueagle-atm4-firmware| LICENCE.via_vt6656 | LICENCE.xc5000 |
| LICENSE.dib0700 | LICENSE.radeon_rlc | RTL8192E | TDA7706_OM_v2.5.1_boot.txt |
| TDA7706_OM_v3.0.2_boot.txt| acenic | adaptec | advansys |
| agere_ap_fw.bin | agere_sta_fw.bin | amd-ucode | ar3k |
| ar7010.fw | ar7010_1_1.fw | ar9170-1.fw | ar9170-2.fw |
| ar9271.fw | ath3k-1.fw | ath6k | av7110 |
| bnx2 | bnx2x | bnx2x-e1-4.8.53.0.fw | bnx2x-e1-5.2.13.0.fw |
| bnx2x-e1-5.2.7.0.fw | bnx2x-e1h-4.8.53.0.fw | bnx2x-e1h-5.2.13.0.fw | bnx2x-e1h-5.2.7.0.fw |
| brcm | carl9170-1.fw | cis | cpia2 |
| cxgb3 | cxgb4 | dabusb | dsp56k |
| dvb-fe-xc5000-1.6.114.fw| dvb-usb-dib0700-1.20.fw | dvb-usb-terratec-h5-drxk.fw| e100 |
| edgeport | emi26 | emi62 | ene-ub6250 |
| ess | f2255usb.bin | htc_7010.fw | htc_9271.fw |
| i2400m-fw-usb-1.4.sbcf | i2400m-fw-usb-1.5.sbcf | i6050-fw-usb-1.5.sbcf | intelliport2.bin |
| iwlwifi-100-5.ucode | iwlwifi-1000-3.ucode | iwlwifi-1000-5.ucode | iwlwifi-3945-2.ucode |
| iwlwifi-4965-1.ucode | iwlwifi-4965-2.ucode | iwlwifi-5000-1.ucode | iwlwifi-5000-2.ucode |
| iwlwifi-5000-5.ucode | iwlwifi-5150-2.ucode | iwlwifi-6000-4.ucode | iwlwifi-6000g2a-5.ucode |
| iwlwifi-6000g2b-5.ucode | iwlwifi-6050-4.ucode | iwlwifi-6050-5.ucode | kaweth |
| keyspan | keyspan_pda | korg | lgs8g75.fw |
| libertas | matrox | microcode.dat | mrvl |
| mts_mt9234mu.fw | mts_mt9234zba.fw | mwl8335_duplex.fw | mwl8k |
| myri10ge_eth_z8e.dat | myri10ge_ethp_z8e.dat | myri10ge_rss_eth_z8e.dat| myri10ge_rss_ethp_z8e.dat |
| myricom | ositech | phanfw.bin | ql2100_fw.bin |
| ql2200_fw.bin | ql2300_fw.bin | ql2322_fw.bin | ql2400_fw.bin |
| ql2500_fw.bin | qlogic | r128 | radeon |
| rt2561.bin | rt2561s.bin | rt2661.bin | rt2860.bin |
| rt2870.bin | rt3070.bin | rt3071.bin | rt3090.bin |
| rt73.bin | rtl_nic | rtlwifi | s2250.fw |
| s2250_loader.fw | sb16 | slicoss | sun |
| sxg | tehuti | ti-connectivity | tigon |
| tlg2300_firmware.bin | tr_smctr.bin | ttusb-budget | ueagle-atm |
| usbdux | usbdux_firmware.bin | usbduxfast_firmware.bin | v4l-cx231xx-avcore-01.fw |
| v4l-cx23418-apu.fw | v4l-cx23418-cpu.fw | v4l-cx23418-dig.fw | v4l-cx23885-avcore-01.fw |
| v4l-cx23885-enc.fw | v4l-cx25840.fw | vicam | vntwusb.fw |
| vxge | yam | yamaha |
===== ifconfig (filtered for eth|wlan|ra|ath|dsl) ================================================================
eth0 Link encap:Ethernet HWaddr ##:##:##:##:##:#1
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:18
wlan0 Link encap:Ethernet HWaddr ##:##:##:##:##:#2
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::be05:43ff:fe01:c42c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2439 errors:0 dropped:0 overruns:0 frame:0
TX packets:1864 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2940736 (2.8 Mb) TX bytes:292260 (285.4 Kb)
===== iwconfig ===================================================================================================
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11abgn ESSID:"§§§§§§§§1"
Mode:Managed Frequency:2.412 GHz Access Point: ##:##:##:##:##:#3
Bit Rate=120 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=56/70 Signal level=-54 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:73 Missed beacon:0
===== cat /etc/sysconfig/network/ifcfg-[earwd]* | grep -v "=''" ==================================================
./collectNWData.sh: line 3814: [: too many arguments
No config files found
===== iwlist scanning ============================================================================================
Channel:1
Quality=54/70 Signal level=-56 dBm
Encryption key:on
ESSID:"§§§§§§§§1"
IE: IEEE 802.11i/WPA2 Version 1
IE: WPA Version 1
Channel:1
Quality=22/70 Signal level=-88 dBm
Encryption key:on
ESSID:"§§§§§§§§2"
IE: IEEE 802.11i/WPA2 Version 1
IE: WPA Version 1
Channel:6
Quality=34/70 Signal level=-76 dBm
Encryption key:on
ESSID:"§§§§§§§§3"
IE: IEEE 802.11i/WPA2 Version 1
IE: WPA Version 1
===== ndiswrapper -l =============================================================================================
No ndiswrapper module loaded
===== Active processes ===========================================================================================
wpa_supplicant:YES knetworkmanager:NO nm-applet:NO
===== Active WPA processes =======================================================================================
/usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -u -f /var/log/wpa_supplicant.log
===== ping tests =================================================================================================
Ping of 195.135.220.3 OK
Ping of www.suse.de OK
===== cat /etc/resolv | grep -i "nameserver" =====================================================================
nameserver 192.168.0.1
===== cat /etc/hosts =============================================================================================
127.0.0.1 localhost
===== route -n | egrep "(eth|ath|ra|wlan|dsl)" ===================================================================
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0
192.168.0.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0
===== Actual date for bias of following greps ====================================================================
22:21:35 2012-01-02
===== grep -i radio /var/log/messages* | tail -n 5 ===============================================================
===== dmesg | grep -i radio | tail -n 5 ==========================================================================
===== tail -n 300 /var/log/messages* | /usr/bin/grep -i firmware | tail -n 10 ====================================
===== egrep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net* ==============
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#2", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
===== egrep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*|egrep -v -i '#|backlist' ================
==================================================================================================================
*** NWElizaStates V0.6.5.4.7-1
IF:eth0 IM:1 IF:wlan0 IM:2 DI:2 AP:1 FALON:1 NIC:0 cNiC:2:0 NI:0 cNI:0 PNG:0 DNS:0 MTU:0 NISS:0 IP6:0 WLW:0 RTDT:osUnd die Ausgabe von:
Zypper se -si network
Code:
S | Name | Type | Version | Arch | Repository
--+-----------------------------+---------+------------------------+--------+--------------------------------------------
i | NetworkManager | package | 0.9.1.90-4.6.1 | x86_64 | Aktualisierungen für openSUSE 12.1 12.1-1.4
i | NetworkManager-kde4-libs | package | 0.9.1git20111027-1.3.1 | x86_64 | Aktualisierungen für openSUSE 12.1 12.1-1.4
i | NetworkManager-openvpn | package | 0.9.0-2.1.2 | x86_64 | openSUSE-12.1-Oss
i | NetworkManager-openvpn | package | 0.9.0-2.1.2 | x86_64 | openSUSE-12.1-12.1-1.4
i | NetworkManager-openvpn-kde4 | package | 0.9.1git20111027-1.3.1 | x86_64 | Aktualisierungen für openSUSE 12.1 12.1-1.4
i | NetworkManager-pptp | package | 0.9.0-3.1.2 | x86_64 | openSUSE-12.1-Oss
i | NetworkManager-pptp | package | 0.9.0-3.1.2 | x86_64 | openSUSE-12.1-12.1-1.4
i | NetworkManager-pptp-kde4 | package | 0.9.1git20111027-1.3.1 | x86_64 | Aktualisierungen für openSUSE 12.1 12.1-1.4
i | NetworkManager-vpnc | package | 0.9.0-2.1.2 | x86_64 | openSUSE-12.1-Oss
i | NetworkManager-vpnc | package | 0.9.0-2.1.2 | x86_64 | openSUSE-12.1-12.1-1.4
i | NetworkManager-vpnc-kde4 | package | 0.9.1git20111027-1.3.1 | x86_64 | Aktualisierungen für openSUSE 12.1 12.1-1.4
i | glib-networking | package | 2.30.1-2.1.3 | x86_64 | openSUSE-12.1-Oss
i | glib-networking | package | 2.30.1-2.1.3 | x86_64 | openSUSE-12.1-12.1-1.4
i | kdenetwork4-filesharing | package | 4.7.2-2.1.2 | x86_64 | openSUSE-12.1-Oss
i | kdenetwork4-filesharing | package | 4.7.2-2.1.2 | x86_64 | openSUSE-12.1-12.1-1.4
i | libproxy1-networkmanager | package | 0.4.7-7.1.2 | x86_64 | openSUSE-12.1-Oss
i | libproxy1-networkmanager | package | 0.4.7-7.1.2 | x86_64 | openSUSE-12.1-12.1-1.4
i | plasmoid-networkmanagement | package | 0.9.1git20111027-1.3.1 | x86_64 | Aktualisierungen für openSUSE 12.1 12.1-1.4
i | yast2-network | package | 2.21.8-2.1.1 | x86_64 | openSUSE-12.1-Oss
i | yast2-network | package | 2.21.8-2.1.1 | x86_64 | openSUSE-12.1-12.1-1.4
Den Grund fuer den zweiten Fehler habe ich dadurch jetzt auch noch gefunden und kann es fixen.
OP
JamesBrown
Newbie
@framp: Bitteschön, gern geschehen. 
Und welcher zweiter Fehler war das?
Und welcher zweiter Fehler war das?
D.h. der MTU Test macht keinen Sinn wenn kein Gateway gesetzt ist.Und jetzt hat der framp Zeit für das dritte "Problem".framp schrieb:In der neuesten Version sind die beiden Fehler gefixed
Grothesk schrieb:
tomm.fa schrieb:
JamesBrown schrieb:
JamesBrown schrieb:
Wer kommt als erstes darauf um was es geht? Kleiner Tipp: Den KNetworkManager gibt es unter openSUSE 12.1 nicht mehr wirklich, an dessen Stelle ist das plasmoid-networkmanagement getreten.
Och nee ...tomm.fa schrieb:...Und jetzt hat der framp Zeit für das dritte "Problem".
Scheint so als muesste die folgende Zeile angepasst werden :-(
Hat jemand eine Idee wie man testen kann ob das Plasmoid gestartet wurde? Ich habe gerade kein laufendes OpenSuSE 12.1 am Laufen.