David Grosze
Newbie
Hallo,
mit der Installation der Karte Netgear WG311 v3 bin ich mit euren Wie-gehts gut vorangekommen:
http://www.linux-club.de/viewtopic.php?t=43835&highlight=netgear+howto
http://www.linux-club.de/viewtopic.php?t=16734&highlight=netzwerk
http://www.linux-club.de/viewtopic.php?t=16737&highlight=netzwerk
Dazu folgende Fragen:
1- Muss die W-LAN-Karte eth0 heißen oder ist wlan0 auch OK.
2- Bei mir gab es keine Datei /etc/resolv.conf Diese habe ich manuell angelegt über MCEDIT. Fehlt noch was?
3- Leider kann ich bisher meinen Router nicht ansprechen !?!
Gruß
David
mit der Installation der Karte Netgear WG311 v3 bin ich mit euren Wie-gehts gut vorangekommen:
http://www.linux-club.de/viewtopic.php?t=43835&highlight=netgear+howto
http://www.linux-club.de/viewtopic.php?t=16734&highlight=netzwerk
http://www.linux-club.de/viewtopic.php?t=16737&highlight=netzwerk
Dazu folgende Fragen:
1- Muss die W-LAN-Karte eth0 heißen oder ist wlan0 auch OK.
2- Bei mir gab es keine Datei /etc/resolv.conf Diese habe ich manuell angelegt über MCEDIT. Fehlt noch was?
3- Leider kann ich bisher meinen Router nicht ansprechen !?!
Gruß
David
Details:
linux:/home/Family # route
Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
192.168.2.0 * 255.255.255.0 U 0 0 0 wlan0
loopback * 255.0.0.0 U 0 0 0 lo
default 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0
linux:/home/Family # ping 192.168.2.1
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
From 192.168.2.100: icmp_seq=1 Destination Host Unreachable
From 192.168.2.100 icmp_seq=1 Destination Host Unreachable
From 192.168.2.100 icmp_seq=2 Destination Host Unreachable
From 192.168.2.100 icmp_seq=3 Destination Host Unreachable
From 192.168.2.100 icmp_seq=4 Destination Host Unreachable
From 192.168.2.100 icmp_seq=5 Destination Host Unreachable
From 192.168.2.100 icmp_seq=6 Destination Host Unreachable
--- 192.168.2.1 ping statistics ---
7 packets transmitted, 0 received, +7 errors, 100% packet loss, time 6024ms
, pipe 3
linux:/home/Family # cat /etc/resolv.conf
nameserver 192.168.2.1
search site
linux:/home/Family # ifconfig
lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:9748 errors:0 dropped:0 overruns:0 frame:0
TX packets:9748 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:0
RX bytes:818821 (799.6 Kb) TX bytes:818821 (799.6 Kb)
wlan0 Protokoll:Ethernet Hardware Adresse 00:14:6C:2F:B2:CB
inet Adresse:192.168.2.100 Bcast:192.168.2.255 Maske:255.255.255.0
inet6 Adresse: fe80::214:6cff:fe2f:b2cb/64 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Speicher:ee010000-ee01ffff