Passwort:
:~ # inxi -F
System:
Host: ****** Kernel: 7.2.11-1-default arch: x86_64 bits: 64
Console: pty pts/0 Distro: openSUSE Tumbleweed 20261020
Machine:
Type: Desktop Mobo: ASUSTeK model: PRIME B450-PLUS v: Rev X.0x
serial: 24flll*#fkfk5 Firmware: UEFI vendor: American Megatrends v: 4645
date: 01/05/2026
CPU:
Info: 6-core model: AMD Ryzen 5 4500 bits: 64 type: MT MCP cache: L2: 3 MiB
Speed (MHz): avg: 1400 min/max: 1400/4208 cores: 1: 1400 2: 1400 3: 1400
4: 1400 5: 1400 6: 1400 7: 1400 8: 1400 9: 1400 10: 1400 11: 1400 12: 1400
Graphics:
Device-1: NVIDIA GK208B [GeForce GT 710] driver: nvidia v: 470.256.02
Display: unspecified server: X.org v: 1.21.1.24 with: Xwayland v: 24.1.13
driver: X: loaded: N/A unloaded: modesetting,vesa failed: nvidia
gpu: efi-framebuffer,nvidia,nvidia-nvswitch resolution: 1024x768~60Hz
API: EGL v: 1.5 drivers: kms_swrast,nvidia,swrast
platforms: gbm,x11,surfaceless,device
API: OpenGL v: 4.6.0 compat-v: 4.6 vendor: mesa v: 26.2.5
renderer: llvmpipe (LLVM 23.1.3 256 bits)
API: Vulkan v: 1.4.363 drivers: nvidia,llvmpipe surfaces: N/A
Info: Tools: api: eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor gpu: nvidia-settings,nvidia-smi
wl: wayland-info x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: NVIDIA GK208 HDMI/DP Audio driver: snd_hda_intel
Device-2: Advanced Micro Devices [AMD/ATI] Renoir/Cezanne HDMI/DP Audio
driver: snd_hda_intel
Device-3: Advanced Micro Devices [AMD] Ryzen HD Audio
driver: snd_hda_intel
API: ALSA v: k7.2.11-1-default status: kernel-api
Network:
Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
driver: r8169
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: 10:7c:61:62:25:a2
Drives:
Local Storage: total: 577.55 GiB used: 413.51 GiB (71.6%)
ID-1: /dev/sda vendor: Intenso model: N/A size: 111.79 GiB
ID-2: /dev/sdb vendor: Toshiba model: MQ01ABD050 size: 465.76 GiB
type: USB
Partition:
ID-1: / size: 42.02 GiB used: 12.54 GiB (29.8%) fs: ext4 dev: /dev/sda3
ID-2: /boot/efi size: 1022 MiB used: 169.2 MiB (16.6%) fs: vfat
dev: /dev/sda1
ID-3: /home size: 61.73 GiB used: 22.67 GiB (36.7%) fs: xfs dev: /dev/sda4
Swap:
ID-1: swap-1 type: partition size: 6 GiB used: 0 KiB (0.0%) dev: /dev/sda2
Sensors:
System Temperatures: cpu: 30.1 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 32 GiB available: 31.14 GiB used: 2.86 GiB (9.2%)
Processes: 320 Uptime: 0h 43m Shell: Bash inxi: 3.3.41
:~ # inxi -Gaz
Graphics:
Device-1: NVIDIA GK208B [GeForce GT 710] driver: nvidia v: 470.256.02
alternate: nouveau,nvidia_drm non-free: series: 470.xx+
status: legacy (EOL~2025-09-xx) arch: Kepler-2 code: GKxxx
process: TSMC 28nm built: 2012-2018 pcie: gen: 1 speed: 2.5 GT/s lanes: 4
link-max: gen: 2 speed: 5 GT/s lanes: 8 ports: active: none off: DVI-D-1
empty: HDMI-A-1,VGA-1 bus-ID: 05:00.0 chip-ID: 10de:128b class-ID: 0300
Display: unspecified server: X.org v: 1.21.1.24 with: Xwayland v: 24.1.13
compositor: kwin_wayland driver: X: loaded: N/A unloaded: modesetting,vesa
failed: nvidia alternate: fbdev,nouveau,nv
gpu: efi-framebuffer,nvidia,nvidia-nvswitch display-ID: :1 screens: 1
Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.63x7.99")
s-diag: 338mm (13.3")
Monitor-1: Unknown-1 res: mode: 1024x768 hz: 60 scale: 100% (1) dpi: 50
size: 521x293mm (20.51x11.54") diag: 598mm (23.53") modes: N/A
API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia device: 2
drv: swrast gbm: drv: kms_swrast surfaceless: drv: swrast x11: drv: swrast
inactive: wayland,device-1
API: OpenGL v: 4.6.0 compat-v: 4.6 vendor: mesa v: 26.2.5 glx-v: 1.4
direct-render: yes renderer: llvmpipe (LLVM 23.1.3 256 bits)
device-ID: ffffffff:ffffffff memory: 30.41 GiB unified: yes
API: Vulkan v: 1.4.363 layers: 2 device: 0 type: discrete-gpu
name: NVIDIA GeForce GT 710 driver: nvidia v: 470.256.02
device-ID: 10de:128b surfaces: N/A device: 1 type: cpu name: llvmpipe
(LLVM 23.1.3 256 bits) driver: mesa llvmpipe v: 26.2.5 (LLVM 23.1.3)
device-ID: 10005:0000 surfaces: N/A
Info: Tools: api: eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor gpu: nvidia-settings,nvidia-smi
wl: wayland-info x11: xdpyinfo, xprop, xrandr
:~ # journalctl- b
journalctl-: Befehl nicht gefunden
:~ # cat /proc/cmdline
initrd=\opensuse-tumbleweed\7.2.11-1-default\initrd-ceaad0f3629c6096b21147cb21c1ad82a761b4b8 root=UUID=987e4e86-173d-429c-b391-41d4240e3d18 splash=silent quiet security=selinux selinux=1 mitigations=auto
:~ #
(Augenschreck).
