• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

AudioExcel MD MATE (CMI8738) wird nicht von ALSACONF erkannt

P

pesse

Hallo,

ich habe schon einmal gepostet, als meine Nvidia-Soundkarte, bei meiner Suse 10.0 Distribution nicht laufen wollte. Nun habe ich die OnBord Karte deaktiviert und eine alte Audio Excel Karte installiert.

Leider erkennt ALSA diese Karte auch nicht.

ALSA version:
alsamixergui-0.9.0rc1-546
kalsatools-1.5.0-350
alsa-devel-1.0.10-0.pm.1
alsa-tools-gui-1.0.10-0.pm.0
alsa-docs-1.0.10-0.pm.1
alsa-tools-1.0.10-0.pm.0
FA_clalsadrv-1.0.1-5
alsa-firmware-1.0.10-0.pm.0
alsa-1.0.10-0.pm.1

Ich habe auch probiert von C-Media den passenden Treiber zu finden,
aber alles was ich gefunden habe ist das hier:

http://www.cmedia.com.tw/download/OS-e-cmi8738_linux.htm

FILE01 cmpci-6.64.tar.bz2
FILE02 cmpci-patch-2.4.25.tar.bz2
FILE03 cmpci-patch-2.6.4.tar.bz2

Ich habe die 3 Files zwar entpackt, habe aber keine Ahnung was ich damit anfangen soll.

Im ALSA HOWTO zur Treiber insterlation, der Audio Excel Treiber steht,
das man das Modul Soundcore aktivieren soll.
Wie soll das gehn?

http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=AudioExcel&card=MD+Mate.&chip=CMI8738&module=cmipci

Jedenfalls wird der Befehl "modinfo soundcore" nicht erkannt.

Ich probier echt schon lange, den Sound als laufen zu bekommen,
aber ich scheiter immer wieder.

Wär echt super wenn ich noch ein paar Vorschläge zur Lösung des Problems hören könnte.


grüsse pesse
 
hmm.. komisch.
Und
Code: 
zcat /proc/config.gz | grep CMI

Wird die Karte überhaupt erkannt?
Code: 
lspci | grep -i audio
 
Code: 
linux:~ # zcat /proc/config.gz | grep CMI
CONFIG_SND_CMI8330=m
CONFIG_SND_CMIPCI=m
linux:~ # lspci | grep -i audio
linux:~ #
 
Ok. Warum 'modprobe -l' nix ausspuckt ist mir ein Rätsel. Aber das modul sollte da sein. Nur wird die Karte wohl prinzipiell nicht erkannt am PCI slot...

Versuch mal das modul zu laden:
Code: 
modprobe snd_cmipci
 
Also, die Karte sollte funktionieren und steckt auch 100% richtig drin.
Mehr kann ich leider dazu nicht sagen.
Code: 
linux:~ # modprobe snd_cmipci
FATAL: Module snd_cmipci not found.
linux:~ #

Was kann ich tun?
 
Leider macht das auch kein Unterschied:
Code: 
linux:~ # modprobe snd-cmipci
FATAL: Module snd_cmipci not found.
linux:~ #
 
Heh, irgendwas ist faul. Du hast zwar das modul in der .config vom kernel, aber
Code: 
find /lib/modules/`uname -r`/kernel/sound -name *cmi*
spuckt nix aus?

Dann stimmt aber was mit deiner Kernel-Installation nicht.
 
Ich habe mal das kernel-source-2.6.16-AS24 von alphagate.hopto.org gezogen installiert. Meinst du es könnte helfen wenn ich wieder mit YaST2 ein downgrade auf Verion 2.6.13-15 mache?
 
pesse schrieb:
Ich habe mal das kernel-source-2.6.16-AS24 von alphagate.hopto.org gezogen installiert. Meinst du es könnte helfen wenn ich wieder mit YaST2 ein downgrade auf Verion 2.6.13-15 mache?
Zum Vergrößern anklicken....
Ah, und das hast du selbst kompiliert? Haste da irgendwie `make modules_install' vergessen oder was ist da?

Downgrade, nunja... da sollten dann zumindest alle modules da sein.. aber die sollten beim -AS auch da sein ;)
 
Ich bin wohl zu sehr Windows gewohnt :lol:

Ich habe keine Module nach dem kernel Update geladen.
Jetzt habe ich wieder Version 2.6.13-15-default.

Wie lade ich nun die einzelnen Module?

Mein Start Protokoll:

<notice>
Boot logging started on /dev/tty1(/dev/console) at Sat Mar 11 11:29:21 2006

Master Resource Control: previous runlevel: N, switching to runlevel: 5
rescue=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 initrd=initrd REDIRECT=/dev/tty1 COLUMNS=127 PATH=/lbin:/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=linux splash=silent SPLASH=yes _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [<notice>checkproc: /sbin/udevd 3288<notice>checkproc: /sbin/udevd 3287<notice>checkproc: /sbin/udevd 2154
Starting D-BUS daemondone
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console rescue=1 SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 initrd=initrd REDIRECT=/dev/tty1 COLUMNS=127 PATH=/lbin:/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ BOOT_IMAGE=linux SPLASH=yes splash=silent _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console rescue=1 SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 initrd=initrd REDIRECT=/dev/tty1 COLUMNS=127 PATH=/lbin:/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ BOOT_IMAGE=linux SPLASH=yes splash=silent _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ rescue=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 initrd=initrd REDIRECT=/dev/tty1 COLUMNS=127 PATH=/lbin:/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=linux splash=silent SPLASH=yes _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
Initializing random number generatordone
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
eth0 configuration: eth-id-00:30:84:0b:6f:07
eth0 IP address: 192.168.2.58/24
doneSetting up service network . . . . . . . . . . . . . . . .done
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ rescue=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 initrd=initrd REDIRECT=/dev/tty1 COLUMNS=127 PATH=/lbin:/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=linux splash=silent SPLASH=yes _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Importing Net File System (NFS)unused
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
doneacpid: loading ACPI modules ( ac battery button ) done
Starting acpid <notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ rescue=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 initrd=initrd REDIRECT=/dev/tty1 COLUMNS=127 PATH=/lbin:/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=linux splash=silent SPLASH=yes _=/sbin/startproc DAEMON=/usr/sbin/acpid ]
done
Checking/updating CPU microcodefailed
Starting nfsboot (sm-notify) done
Mount SMB/ CIFS File Systems unused
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ rescue=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 initrd=initrd REDIRECT=/dev/tty1 COLUMNS=127 PATH=/lbin:/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=linux splash=silent SPLASH=yes _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
xend skipped
<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ rescue=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 initrd=initrd REDIRECT=/dev/tty1 COLUMNS=127 PATH=/lbin:/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=linux splash=silent SPLASH=yes _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
Starting INET services. (xinetd)done
<notice>startproc: execve (/usr/sbin/named) [ /usr/sbin/named -t /var/lib/named -u named ], [ rescue=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 initrd=initrd REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 checkAndCopyConfigFilesCalled=yes HOME=/ SHLVL=2 BOOT_IMAGE=linux namedConfChecked=yes splash=silent SPLASH=yes initializeNamedCalled=yes _=/sbin/startproc DAEMON=/usr/sbin/named ]
Starting name server BIND done
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ rescue=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 initrd=initrd REDIRECT=/dev/tty1 COLUMNS=127 PATH=/lbin:/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=linux splash=silent SPLASH=yes _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ rescue=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 initrd=initrd REDIRECT=/dev/tty1 COLUMNS=127 PATH=/lbin:/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=linux splash=silent SPLASH=yes _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
Starting Name Service Cache Daemondone
Starting mdnsddone
Starting mail service (Postfix)done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ rescue=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 initrd=initrd REDIRECT=/dev/tty1 COLUMNS=127 PATH=/lbin:/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=linux splash=silent SPLASH=yes _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ rescue=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 initrd=initrd REDIRECT=/dev/tty1 COLUMNS=127 PATH=/lbin:/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=linux splash=silent SPLASH=yes _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting HAL daemondone
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ rescue=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 initrd=initrd REDIRECT=/dev/tty1 COLUMNS=127 PATH=/lbin:/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=linux splash=silent SPLASH=yes _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
Starting powersaved (accessing ACPI events over acpid) done
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console rescue=1 SHELL=/bin/sh TERM=linux QTDIR=/usr/lib/qt3 INIT_VERSION=sysvinit-2.85 initrd=initrd KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=127 PATH=/lbin:/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg LANG=de_DE.UTF-8 PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ BOOT_IMAGE=linux XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde SPLASH=yes splash=silent _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ rescue=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 initrd=initrd REDIRECT=/dev/tty1 COLUMNS=127 PATH=/lbin:/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=linux splash=silent SPLASH=yes _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
<notice>checkproc: /opt/kde3/bin/kdm 4200
Starting cupsddone
done
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
FATAL: Module ip_tables not found.
FATAL: Module ip_conntrack not found.
FATAL: Module ip6table_filter not found.
FATAL: Module ip6table_mangle not found.
FATAL: Module ip_tables not found.
iptables-batch v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
SuSEfirewall2: Error: iptables-batch failed, re-running using iptables
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `nat': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `nat': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `mangle': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `mangle': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: microcode
Skipped services in runlevel 5: nfs smbfs xend
<notice>killproc: kill(3316,3)
 
lol... ja da fehlen ja sämtliche module.

sind da jetzt irgendwie .ko's in /lib/modules/`uname -r` ?
Wenn ja hilft evtl ein 'depmod -ae'
 
Ja scheisse, was soll ich machen?
Wundert mich auch irgendwie das, der Sound das einzigste ist was nicht läuft.
 
In dem Ordner /lib/modules/2.6.13-15-default/updates/initrd befinden sich einige KOs.
Genauso wie in /lib/modules/2.6.13-override-default/initrd

Beim Befehl depmod -ae passiert auch nichts
 
öööhm ja... lol.

Also ich würde mir mal das aktuelle kernel-default .rpm besorgen, und von Hand neu installieren mit rpm -Uvh --force oder wie auch immer...
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben