capi und isdnlog

[pft]

Hallo,

ich habe neulich eine alte teles karte gegen eine Fritz DSL ausgetauscht, die ich derzeit nur für isdn benutze.
Dial in und fax funktionieren soweit ok.

Nur der isdnlog ist tot, d.h. keine einträge in isdn.log
isdnlog läuft:

pc-server:~ # ps aux | grep isdnlog
root      6525  0.0  0.9  2792 1500 pts/1    S    17:23   0:00 /usr/sbin/isdnlog -f /etc/isdn/isdnlog.options.contr0 /dev/isdnctrl0

Hier noch der Auszug aus /var/log/messages nach einem rcisdn restart mit dem einzigen Hinweis bei "capidrv-1: controller dead ?"

May  5 17:20:58 pc-server ipppd[2605]: Exit.
May  5 17:20:58 pc-server kernel: capidrv: Rev 1.1.2.2: loaded
May  5 17:20:58 pc-server kernel: fcdsl: unsupported module, tainting kernel.
May  5 17:20:58 pc-server kernel: fcdsl: module license 'Proprietary' taints kernel.
May  5 17:20:58 pc-server kernel: fcdsl: AVM FRITZ!Card DSL driver, revision 0.4.0
May  5 17:20:58 pc-server kernel: fcdsl: fcdsl built on Mar 18 2005 at 17:58:54)
May  5 17:20:58 pc-server kernel: ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
May  5 17:20:58 pc-server kernel: fcdsl: Loading...
May  5 17:20:58 pc-server kernel: fcdsl: Driver 'fcdsl' attached to stack. (164)
May  5 17:20:58 pc-server kernel: kcapi: Controller 1: fcdsl-fea00000-11 attached
May  5 17:20:58 pc-server kernel: kcapi: Controller 2: fcdsl-fea00000-11 attached
May  5 17:20:58 pc-server kernel: fcdsl: Loaded.
May  5 17:21:01 pc-server kernel: fcdsl: Using VCC/VPI/VCI = 0x1/0x1/0x20
May  5 17:21:01 pc-server kernel: fcdsl: Stack version 3.11-02
May  5 17:21:01 pc-server kernel: fcdsl: Stack version 3.11-02
May  5 17:21:01 pc-server kernel: kcapi: card 1 "fcdsl-fea00000-11" ready.
May  5 17:21:01 pc-server kernel: kcapi: card 2 "fcdsl-fea00000-11" ready.
May  5 17:21:01 pc-server kernel: capidrv: controller 1 up
May  5 17:21:01 pc-server kernel: fcdsl: Unknown application id! (1)
May  5 17:21:01 pc-server kernel: capidrv-1: now up (2 B channels)
May  5 17:21:01 pc-server kernel: capidrv-1: D2 trace enabled
May  5 17:21:01 pc-server kernel: fcdsl: Unknown application id! (1)
May  5 17:21:01 pc-server kernel: capidrv: controller 2 up
May  5 17:21:01 pc-server kernel: capidrv-2: now up (1 B channels)
May  5 17:21:01 pc-server kernel: capidrv-2: D2 trace enabled
May  5 17:21:01 pc-server isdnlog: isdnlog Version 4.68 starting 
May  5 17:21:02 pc-server isdnlog: Holiday Version 1.10-Germany [12-Apr-1999] loaded [11 entries from /usr/lib/isdn/holiday-de.dat] 
May  5 17:21:02 pc-server isdnlog: Dest V1.01: File '/usr/lib/isdn/dest.cdb' opened fine - Dest 1.0 int (+h) AT DE NL CH 
May  5 17:21:02 pc-server isdnlog: Zone V1.25: Provider 0 File '/usr/lib/isdn/zone-de-dtag.cdb' opened fine - V1.25 K2 C2 N256 T157147 O1 L5 
May  5 17:21:02 pc-server isdnlog: Rates   Version 3.08 [12-Feb-2004 23:46:02] loaded [73 Providers, 548 Zones, 2021 Areas, 41 Services, 598 Comments, 15 eXceptions, 48 Redirects, 1727 Rates from /usr/lib/isdn/rate-de.dat] 
May  5 17:21:02 pc-server isdnlog: (ISDN subsystem with ISDN_MAX_CHANNELS > 16 detected, ioctl(IIOCNETGPN) is available) 
May  5 17:21:02 pc-server isdnlog: isdn.conf:3 active channels, 6 MSN/SI entries 
May  5 17:21:02 pc-server isdnlog: (Data versions: iprofd=0x06  net_cfg=0x06  /dev/isdninfo=0x01) 
May  5 17:21:02 pc-server isdnlog: Everything is fine, isdnlog-4.68 is running in full featured mode. 
May  5 17:22:01 pc-server kernel: capidrv-1: controller dead ??
May  5 17:22:01 pc-server kernel: capidrv-1: listen_change_state state=1 event=1 ????
May  5 17:22:38 pc-server kernel: isdn_ppp_bind: Can't find a (free) connection to the ipppd daemon.
May  5 17:23:11 pc-server last message repeated 12 times
May  5 17:23:15 pc-server last message repeated 3 times
May  5 17:23:39 pc-server modify_resolvconf: restored /etc/resolv.conf.saved.by.ifup.ippp0 to /etc/resolv.conf
May  5 17:23:39 pc-server kernel: isdn_free_channel: called with invalid drv(-1) or channel(-1)
May  5 17:23:42 pc-server modify_resolvconf: Service ifup modified /etc/resolv.conf. See info block in this file
May  5 17:23:42 pc-server ipppd[6841]: Found 1 device: 
May  5 17:23:42 pc-server ipppd[6842]: ipppd i2.2.12 (isdn4linux version of pppd by MH) started
May  5 17:23:42 pc-server ipppd[6842]: init_unit: 0 
May  5 17:23:42 pc-server kernel: ippp, open, slot: 0, minor: 0, state: 0000
May  5 17:23:42 pc-server kernel: ippp_ccp: allocated reset data structure c425c800
May  5 17:23:42 pc-server ipppd[6842]: Connect[0]: /dev/ippp0, fd: 7
May  5 17:23:43 pc-server smpppd[6863]: smpppd version 1.16 started
May  5 17:23:55 pc-server kernel: ippp0: dialing 1 019102345... 
May  5 17:23:58 pc-server kernel: capilib_new_ncci: kcapi: appl 1 ncci 0x10101 up
May  5 17:23:58 pc-server kernel: isdn_net: ippp0 connected
May  5 17:23:58 pc-server kernel: capidrv-1: chan 1 up with ncci 0x10101

Wäre nett wenn jemand helfen könnte oder zumindest nen Tipp hätte wonach ich noch suchen kann

 

[dietmar]

Hi
bin mir nicht ganz sicher, aber ich glaube man kann unter Yast - Controller ISDN einrichten ein Häkchen setzen bei "ISDN Protokoll ja/Nein"

Mal dort nachséhen. Bei mir wird ein ISDN Log mitgeschriben - Alle eingehenden und ausgehenden Anrufe werden protokolliert.

MFG
Dietmar