[erledigt] Opensuse 12.1 Live-CD hängt

Maxtech · 31 Juli 2012

Wollte 12.1 ausprobieren. Weder die Gnome noch KDE CD brachte ich zum starten.
Nach dem Kernel laden, komme ich nur auf ein Login und weiter gehts nicht.

Mit der Opensuse 11.4 und Ubuntu Live-CD geht es.

Vor einiger Zeit probierte ich die Live CD auf dem gleichen System aus und damals startete sie auf.
An der Hardware wurde nichts verändert.
Versuchte es auch mit einer anderen Harddisk die ich zuvor neu Partitioniert habe. Ohne Erfolg.

Herz-von-Hessen · 31 Juli 2012

Hallo Maxtech,

Maxtech schrieb:
Wollte 12.1 ausprobieren. Weder die Gnome noch KDE CD brachte ich zum starten.
Nach dem Kernel laden, komme ich nur auf ein Login und weiter gehts nicht.

Heißt das, dass Du Dich auch nicht einloggen kannst, wenn ja, warum nicht?
Wird denn die Tastatur erkannt, leuchtet deren LED Anzeige?

Maxtech schrieb:
Vor einiger Zeit probierte ich die Live CD auf dem gleichen System aus und damals startete sie auf.
An der Hardware wurde nichts verändert.

Wenn Du tatsächlich den selben Datenträger bereits erfolgreich auf dem Rechner hast starten können und nicht an der Hardware seitdem geändert wurde, dann bleibt nur der Schluss das die CD irgendwie zu Schaden gekommen ist.
Als eher vernachlässigbar sehe ich dann nur noch einen Defekt im Laufwerk das den Datenträger ausließt, schon weil es mit einer anderen CD klappt wie Du schreibst.

lieben Gruß aus Hessen

whois · 31 Juli 2012

Hört sich an als wäre die CD hin.

Maxtech · 31 Juli 2012

Die CD's habe ich auf einem anderen Rechner geprüft und die Laufwerke sind in Ordnung, da Ubuntu oder Opensuse 11.4 funktioniert.
Bevor eine Installation startet, erscheint "linux login: "

Beim 2. Laufwerk kommt aber eine Fehlermeldung.

http://s7.directupload.net/file/d/2968/eyl35sox_jpg.htm

lOtz1009 · 31 Juli 2012

Scheint als hätte der XServer nicht richtig gestartet.
Boote die CD mal mit der Bootoption nomodeset
(Die Fehlermeldung bei directupload kann ich hier leider nicht anschauen)

Maxtech · 31 Juli 2012

Habe ich probiert. Brachte nichts und ebenfalls bei Ubuntu und Xbuntu konnte nicht fertig installiert werden. Ich vermute es liegt an der Hardware.
Festplatte und DVD Laufwerke sind IDE verbaut, Prozessor Sempron.
So habe ich wieder 11.4 installiert und mit diesem läuft es.

SUSEDJAlex · 1 Aug. 2012

na dann poste doch mal von der 11.4 aus mit den folgenden Befehlen:

( bitte die Postings als Code-Tag einfügen )

Code:

lsusb
lspci
dmesg

außerdem wäre interessant was in deinem Rechner verbaut ist...

LG SUSEDJAlex

Maxtech · 1 Aug. 2012

Prozessor ist AMD Sempron 3000+, Asus Board A7V600-X. Grafikkarte Radeon 9550
Den Rest sieht man in den Codes.

Wäre eine Möglichkeit das IDE nicht mehr unterstützt wird?

Oder warten bis neue Distributionen mit neuem Kernel verfügbar sind.

Code:

lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Code:

lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AS [Radeon 9550]
01:00.1 Display controller: ATI Technologies Inc RV350 AS [Radeon 9550] (Secondary)

Code:

dmesg 085124] pci 0000:00:10.0: supports D1 D2
[    0.085128] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.085133] pci 0000:00:10.0: PME# disabled
[    0.085154] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[    0.085196] pci 0000:00:10.1: reg 20: [io  0x9000-0x901f]
[    0.085226] pci 0000:00:10.1: supports D1 D2
[    0.085229] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.085235] pci 0000:00:10.1: PME# disabled
[    0.085256] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[    0.085298] pci 0000:00:10.2: reg 20: [io  0x8800-0x881f]
[    0.085328] pci 0000:00:10.2: supports D1 D2
[    0.085331] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.085336] pci 0000:00:10.2: PME# disabled
[    0.085357] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
[    0.085399] pci 0000:00:10.3: reg 20: [io  0x8400-0x841f]
[    0.085429] pci 0000:00:10.3: supports D1 D2
[    0.085432] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.085438] pci 0000:00:10.3: PME# disabled
[    0.085458] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
[    0.085475] pci 0000:00:10.4: reg 10: [mem 0xde800000-0xde8000ff]
[    0.085531] pci 0000:00:10.4: supports D1 D2
[    0.085534] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.085539] pci 0000:00:10.4: PME# disabled
[    0.085563] pci 0000:00:11.0: [1106:3227] type 0 class 0x000601
[    0.085622] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.085630] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[    0.085673] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
[    0.085690] pci 0000:00:11.5: reg 10: [io  0xe000-0xe0ff]
[    0.085750] pci 0000:00:11.5: supports D1 D2
[    0.085771] pci 0000:00:11.6: [1106:3068] type 0 class 0x000780
[    0.085787] pci 0000:00:11.6: reg 10: [io  0xe500-0xe5ff]
[    0.085867] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
[    0.085884] pci 0000:00:12.0: reg 10: [io  0x8000-0x80ff]
[    0.085894] pci 0000:00:12.0: reg 14: [mem 0xde000000-0xde0000ff]
[    0.085946] pci 0000:00:12.0: supports D1 D2
[    0.085949] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.085954] pci 0000:00:12.0: PME# disabled
[    0.086010] pci 0000:01:00.0: [1002:4153] type 0 class 0x000300
[    0.086026] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[    0.086036] pci 0000:01:00.0: reg 14: [io  0xd800-0xd8ff]
[    0.086045] pci 0000:01:00.0: reg 18: [mem 0xdf800000-0xdf80ffff]
[    0.086070] pci 0000:01:00.0: reg 30: [mem 0xeffe0000-0xefffffff pref]
[    0.086090] pci 0000:01:00.0: supports D1 D2
[    0.086112] pci 0000:01:00.1: [1002:4173] type 0 class 0x000380
[    0.086125] pci 0000:01:00.1: reg 10: [mem 0xe0000000-0xe7ffffff pref]
[    0.086135] pci 0000:01:00.1: reg 14: [mem 0xdf000000-0xdf00ffff]
[    0.086177] pci 0000:01:00.1: supports D1 D2
[    0.086215] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.086221] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.086226] pci 0000:00:01.0:   bridge window [mem 0xdf000000-0xdfffffff]
[    0.086232] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf7ffffff pref]
[    0.086241] pci_bus 0000:00: on NUMA node 0
[    0.086247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.086486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[    0.091214] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
[    0.091342] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[    0.091467] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[    0.091592] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[    0.091875] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12)
[    0.092101] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12)
[    0.092367] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12)
[    0.092537] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled.
[    0.092593] HEST: Table is not found!
[    0.092921] SCSI subsystem initialized
[    0.093041] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.093045] vgaarb: loaded
[    0.093251] PCI: Using ACPI for IRQ routing
[    0.093257] PCI: pci_cache_line_size set to 32 bytes
[    0.093317] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.093322] reserve RAM buffer: 000000002fffb000 - 000000002fffffff 
[    0.093507] NetLabel: Initializing
[    0.093510] NetLabel:  domain hash size = 128
[    0.093512] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.093534] NetLabel:  unlabeled traffic allowed by default
[    0.093551] Switching to clocksource tsc
[    0.095704] AppArmor: AppArmor Filesystem Enabled
[    0.095733] pnp: PnP ACPI init
[    0.095783] ACPI: bus type pnp registered
[    0.095783] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    0.095783] pnp 00:00: [mem 0x000f0000-0x000fffff]
[    0.095783] pnp 00:00: [mem 0x00100000-0x2fffffff]
[    0.095783] pnp 00:00: [mem 0xfec00000-0xfec000ff]
[    0.095783] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[    0.095783] pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.095783] pnp 00:01: [bus 00-ff]
[    0.095783] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.095783] pnp 00:01: [io  0x0000-0x0cf7 window]
[    0.095783] pnp 00:01: [io  0x0d00-0xffff window]
[    0.095783] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.095783] pnp 00:01: [mem 0x000c8000-0x000dffff window]
[    0.095783] pnp 00:01: [mem 0x30000000-0xfebfffff window]
[    0.095783] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.095783] pnp 00:02: [io  0xe400-0xe47f]
[    0.095783] pnp 00:02: [io  0xe800-0xe81f]
[    0.095783] pnp 00:02: [mem 0xfff80000-0xffffffff]
[    0.095783] pnp 00:02: [mem 0xffb80000-0xffbfffff]
[    0.095783] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.095783] pnp 00:03: [io  0x0010-0x001f]
[    0.095783] pnp 00:03: [io  0x0022-0x002d]
[    0.095783] pnp 00:03: [io  0x0030-0x003f]
[    0.095783] pnp 00:03: [io  0x0044-0x005f]
[    0.095783] pnp 00:03: [io  0x0062-0x0063]
[    0.095783] pnp 00:03: [io  0x0065-0x006f]
[    0.095783] pnp 00:03: [io  0x0074-0x007f]
[    0.095783] pnp 00:03: [io  0x0091-0x0093]
[    0.095783] pnp 00:03: [io  0x00a2-0x00bf]
[    0.095783] pnp 00:03: [io  0x00e0-0x00ef]
[    0.095783] pnp 00:03: [io  0x04d0-0x04d1]
[    0.095783] pnp 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.095935] pnp 00:04: [dma 4]
[    0.095939] pnp 00:04: [io  0x0000-0x000f]
[    0.095943] pnp 00:04: [io  0x0080-0x0090]
[    0.095946] pnp 00:04: [io  0x0094-0x009f]
[    0.095949] pnp 00:04: [io  0x00c0-0x00df]
[    0.096002] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.096028] pnp 00:05: [io  0x0070-0x0073]
[    0.096054] pnp 00:05: [irq 8]
[    0.096110] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.096129] pnp 00:06: [io  0x0061]
[    0.096182] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.096200] pnp 00:07: [io  0x00f0-0x00ff]
[    0.096208] pnp 00:07: [irq 13]
[    0.096263] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.096623] pnp 00:08: [io  0x03f2-0x03f5]
[    0.096628] pnp 00:08: [io  0x03f7]
[    0.096636] pnp 00:08: [irq 6]
[    0.096640] pnp 00:08: [dma 2]
[    0.096721] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.097696] pnp 00:09: [io  0x0378-0x037f]
[    0.097701] pnp 00:09: [io  0x0778-0x077b]
[    0.097709] pnp 00:09: [irq 7]
[    0.097712] pnp 00:09: [dma 3]
[    0.097814] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.098536] pnp 00:0a: [io  0x03f8-0x03ff]
[    0.098545] pnp 00:0a: [irq 4]
[    0.098638] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.099298] pnp 00:0b: [io  0x0060]
[    0.099302] pnp 00:0b: [io  0x0064]
[    0.099310] pnp 00:0b: [irq 1]
[    0.099373] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.099515] pnp 00:0c: [irq 12]
[    0.099584] pnp 00:0c: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.100567] pnp 00:0d: [io  0x0200-0x0207]
[    0.100638] pnp 00:0d: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.100688] pnp 00:0e: [io  0x002e-0x002f]
[    0.100692] pnp 00:0e: [io  0x0290-0x0297]
[    0.100696] pnp 00:0e: [io  0x0370-0x0375]
[    0.100773] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.100918] pnp: PnP ACPI: found 15 devices
[    0.100921] ACPI: ACPI bus type pnp unregistered
[    0.100928] PnPBIOS: Disabled by ACPI PNP
[    0.100950] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.100956] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.100961] system 00:00: [mem 0x00100000-0x2fffffff] could not be reserved
[    0.100965] system 00:00: [mem 0xfec00000-0xfec000ff] could not be reserved
[    0.100970] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.100980] system 00:02: [io  0xe400-0xe47f] has been reserved
[    0.100984] system 00:02: [io  0xe800-0xe81f] has been reserved
[    0.100989] system 00:02: [mem 0xfff80000-0xffffffff] could not be reserved
[    0.100994] system 00:02: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.101002] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.101013] system 00:0e: [io  0x0290-0x0297] has been reserved
[    0.101021] system 00:0e: [io  0x0370-0x0375] has been reserved
[    0.139027] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.139034] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.139042] pci 0000:00:01.0:   bridge window [mem 0xdf000000-0xdfffffff]
[    0.139048] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf7ffffff pref]
[    0.139067] pci 0000:00:01.0: setting latency timer to 64
[    0.139073] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.139077] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.139082] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.139086] pci_bus 0000:01: resource 1 [mem 0xdf000000-0xdfffffff]
[    0.139090] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf7ffffff pref]
[    0.139187] NET: Registered protocol family 2
[    0.139299] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.139984] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.142263] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.143477] TCP: Hash tables configured (established 131072 bind 65536)
[    0.143481] TCP reno registered
[    0.143488] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.143525] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.143752] NET: Registered protocol family 1
[    0.143782] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.143885] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[    0.143905] pci 0000:01:00.0: Boot video device
[    0.143912] PCI: CLS 32 bytes, default 32
[    0.144021] Unpacking initramfs...
[    0.506731] Freeing initrd memory: 10356k freed
[    0.527034] Simple Boot Flag at 0x3a set to 0x1
[    0.527692] audit: initializing netlink socket (disabled)
[    0.527719] type=2000 audit(1343818684.524:1): initialized
[    0.548908] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.549128] VFS: Disk quotas dquot_6.5.2
[    0.549174] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.549339] msgmni has been set to 374
[    0.549654] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.549690] io scheduler noop registered
[    0.549693] io scheduler deadline registered
[    0.549708] io scheduler cfq registered (default)
[    0.550876] vesafb: framebuffer at 0xf0000000, mapped to 0xf0880000, using 5120k, total 16384k
[    0.550881] vesafb: mode is 1280x1024x16, linelength=2560, pages=5
[    0.550884] vesafb: protected mode interface info at c000:582d
[    0.550888] vesafb: pmi: set display start = c00c58c1, set palette = c00c590d
[    0.550891] vesafb: pmi: ports = d810 d816 d854 d838 d83c d85c d800 d804 d8b0 d8b2 d8b4 
[    0.550902] vesafb: scrolling: redraw
[    0.550907] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.555297] bootsplash 3.1.6-2004/03/31: looking for picture...
[    0.555304] bootsplash: silentjpeg size 245922 bytes
[    0.605977] bootsplash: ...found (1280x1024, 255920 bytes, v3).
[    0.607231] bootsplash: silentjpeg size 342098 bytes
[    0.825034] Console: switching to colour frame buffer device 156x60
[    0.961306] fb0: VESA VGA frame buffer device
[    0.961420] ERST: Table is not found!
[    0.961463] isapnp: Scanning for PnP cards...
[    1.271422] isapnp: No Plug & Play device found
[    1.271850] Non-volatile memory driver v1.3
[    1.271854] Linux agpgart interface v0.103
[    1.272069] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[    1.277196] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[    1.277242] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[    1.297580] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.319633] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.319986] Fixed MDIO Bus: probed
[    1.320084] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.322456] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.322465] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.322590] mice: PS/2 mouse device common for all mice
[    1.322754] cpuidle: using governor ladder
[    1.322758] cpuidle: using governor menu
[    1.323125] TCP cubic registered
[    1.323169] NET: Registered protocol family 10
[    1.323706] lo: Disabled Privacy Extensions
[    1.324085] Registering the dns_resolver key type
[    1.324152] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
[    1.324170] Using IPI No-Shortcut mode
[    1.324333] PM: Checking hibernation image partition /dev/disk/by-id/ata-Maxtor_4D040H2_D24SANPE-part5
[    1.340506] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.479793] psmouse serio1: ID: 10 00 64
[    2.334477] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1
[    2.337180] PM: Hibernation image not present or could not be loaded.
[    2.337211] registered taskstats version 1
[    2.337502]   Magic number: 8:587:981
[    2.337765] Freeing unused kernel memory: 428k freed
[    2.338499] Write protecting the kernel text: 4116k
[    2.338570] Write protecting the kernel read-only data: 2872k
[    2.407617] ACPI: acpi_idle registered with cpuidle
[    2.432290] udev[66]: starting version 166
[    2.506037] usbcore: registered new interface driver usbfs
[    2.506089] usbcore: registered new interface driver hub
[    2.754523] rtc_cmos 00:05: RTC can wake from S4
[    2.754679] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    2.754739] rtc0: alarms up to one month, 242 bytes nvram
[    2.790641] [drm] Initialized drm 1.1.0 20060810
[    2.791669] usbcore: registered new device driver usb
[    2.811127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.811206] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    2.811237] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    2.811286] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    2.811389] ehci_hcd 0000:00:10.4: irq 21, io mem 0xde800000
[    2.825900] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    2.825959] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.825964] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.825968] usb usb1: Product: EHCI Host Controller
[    2.825972] usb usb1: Manufacturer: Linux 2.6.37.6-0.20-default ehci_hcd
[    2.825975] usb usb1: SerialNumber: 0000:00:10.4
[    2.826216] hub 1-0:1.0: USB hub found
[    2.826227] hub 1-0:1.0: 8 ports detected
[    2.874388] [drm] radeon defaulting to kernel modesetting.
[    2.874394] [drm] radeon kernel modesetting enabled.
[    2.874487] checking generic (f0000000 1000000) vs hw (f0000000 8000000)
[    2.874491] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[    2.874553] Console: switching to colour dummy device 80x25
[    2.875213] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.880388] [drm] initializing kernel modesetting (RV350 0x1002:0x4153).
[    2.883126] libata version 3.00 loaded.
[    2.887896] sata_via 0000:00:0f.0: version 2.6
[    2.887943] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    2.888066] sata_via 0000:00:0f.0: routed to hard irq line 0
[    2.901769] uhci_hcd: USB Universal Host Controller Interface driver
[    2.907212] scsi0 : sata_via
[    2.912380] scsi1 : sata_via
[    2.914861] ata1: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa400 irq 20
[    2.914866] ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xa800 bmdma 0xa408 irq 20
[    2.917821] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    2.917844] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    2.917867] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    2.917912] uhci_hcd 0000:00:10.0: irq 21, io base 0x00009400
[    2.917996] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.918000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.918005] usb usb2: Product: UHCI Host Controller
[    2.918008] usb usb2: Manufacturer: Linux 2.6.37.6-0.20-default uhci_hcd
[    2.918012] usb usb2: SerialNumber: 0000:00:10.0
[    2.918276] hub 2-0:1.0: USB hub found
[    2.918287] hub 2-0:1.0: 2 ports detected
[    2.918416] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    2.918426] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    2.918438] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    2.918464] uhci_hcd 0000:00:10.1: irq 21, io base 0x00009000
[    2.918520] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.918525] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.918528] usb usb3: Product: UHCI Host Controller
[    2.918531] usb usb3: Manufacturer: Linux 2.6.37.6-0.20-default uhci_hcd
[    2.918535] usb usb3: SerialNumber: 0000:00:10.1
[    2.918707] hub 3-0:1.0: USB hub found
[    2.918717] hub 3-0:1.0: 2 ports detected
[    2.918816] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.918827] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    2.918838] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    2.918864] uhci_hcd 0000:00:10.2: irq 21, io base 0x00008800
[    2.918921] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.918925] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.918929] usb usb4: Product: UHCI Host Controller
[    2.918932] usb usb4: Manufacturer: Linux 2.6.37.6-0.20-default uhci_hcd
[    2.918935] usb usb4: SerialNumber: 0000:00:10.2
[    2.919094] hub 4-0:1.0: USB hub found
[    2.919101] hub 4-0:1.0: 2 ports detected
[    2.919196] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.919205] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    2.919216] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    2.919242] uhci_hcd 0000:00:10.3: irq 21, io base 0x00008400
[    2.919295] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.919299] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.919303] usb usb5: Product: UHCI Host Controller
[    2.919306] usb usb5: Manufacturer: Linux 2.6.37.6-0.20-default uhci_hcd
[    2.919310] usb usb5: SerialNumber: 0000:00:10.3
[    2.919474] hub 5-0:1.0: USB hub found
[    2.919482] hub 5-0:1.0: 2 ports detected
[    2.920406] [drm] register mmio base: 0xDF800000
[    2.920409] [drm] register mmio size: 65536
[    2.922395] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[    2.922415] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[    2.922473] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[    2.922483] radeon 0000:01:00.0: GTT: 64M 0xF8000000 - 0xFBFFFFFF
[    2.922489] [drm] Generation 2 PCI interface, using max accessible memory
[    2.922495] radeon 0000:01:00.0: VRAM: 128M 0x00000000F0000000 - 0x00000000F7FFFFFF (128M used)
[    2.922569] [drm] radeon: irq initialized.
[    2.922851] [drm] Detected VRAM RAM=128M, BAR=128M
[    2.922858] [drm] RAM width 64bits DDR
[    2.923007] [TTM] Zone  kernel: Available graphics memory: 383420 kiB.
[    2.923011] [TTM] Initializing pool allocator.
[    2.923051] [drm] radeon: 128M of VRAM memory ready
[    2.923055] [drm] radeon: 64M of GTT memory ready.
[    2.923113] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[    2.924445] radeon 0000:01:00.0: WB disabled
[    2.924589] [drm] Loading R300 Microcode
[    2.930095] pata_via 0000:00:0f.1: version 0.3.4
[    2.930129] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    2.934104] [drm] radeon: ring at 0x00000000F8001000
[    2.934133] [drm] ring test succeeded in 1 usecs
[    2.934513] [drm] radeon: ib pool ready.
[    2.934626] [drm] ib test succeeded in 0 usecs
[    2.935071] [drm] Radeon Display Connectors
[    2.935074] [drm] Connector 0:
[    2.935077] [drm]   VGA
[    2.935081] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    2.935083] [drm]   Encoders:
[    2.935086] [drm]     CRT1: INTERNAL_DAC1
[    2.935088] [drm] Connector 1:
[    2.935090] [drm]   DVI-I
[    2.935092] [drm]   HPD1
[    2.935095] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[    2.935098] [drm]   Encoders:
[    2.935100] [drm]     CRT2: INTERNAL_DAC2
[    2.935102] [drm]     DFP1: INTERNAL_TMDS1
[    2.935104] [drm] Connector 2:
[    2.935106] [drm]   S-video
[    2.935108] [drm]   Encoders:
[    2.935110] [drm]     TV1: INTERNAL_DAC2
[    2.942548] scsi2 : pata_via
[    2.942871] scsi3 : pata_via
[    2.944074] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x9800 irq 14
[    2.944080] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x9808 irq 15
[    3.133988] [drm] fb mappable at 0xF0040000
[    3.133994] [drm] vram apper at 0xF0000000
[    3.133997] [drm] size 8294400
[    3.133999] [drm] fb depth is 24
[    3.134001] [drm]    pitch is 7680
[    3.579343] Console: switching to colour frame buffer device 236x63
[    3.776310] fb0: radeondrmfb frame buffer device
[    3.776315] drm: registered panic notifier
[    3.776330] [drm] Initialized radeon 2.7.0 20080528 for 0000:01:00.0 on minor 0
[    3.777068] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    3.789286] ata3.00: ATA-6: Maxtor 4D040H2, DAH017K0, max UDMA/100
[    3.789292] ata3.00: 80043264 sectors, multi 16: LBA 
[    3.804459] ata3.00: configured for UDMA/100
[    3.992016] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    4.002746] scsi 2:0:0:0: Direct-Access     ATA      Maxtor 4D040H2   DAH0 PQ: 0 ANSI: 5
[    4.003515] sd 2:0:0:0: [sda] 80043264 512-byte logical blocks: (40.9 GB/38.1 GiB)
[    4.003597] sd 2:0:0:0: [sda] Write Protect is off
[    4.003602] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.003639] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.077754]  sda: sda1 sda2 < sda5 >
[    4.078375] sd 2:0:0:0: [sda] Attached SCSI disk
[    4.172341] ata4.00: ATAPI: SONY    DVD RW DW-Q30A, YYS1, max UDMA/66
[    4.172350] ata4.01: ATAPI: TOSHIBA DVD-ROM SD-M1212, 1R14, max UDMA/33
[    4.188202] ata4.00: configured for UDMA/66
[    4.204273] ata4.01: configured for UDMA/33
[    4.208543] scsi 3:0:0:0: CD-ROM            SONY     DVD RW DW-Q30A   YYS1 PQ: 0 ANSI: 5
[    4.210442] scsi 3:0:1:0: CD-ROM            TOSHIBA  DVD-ROM SD-M1212 1R14 PQ: 0 ANSI: 5
[    4.886499] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[    4.886508] PM: Basic memory bitmaps created
[    4.893404] PM: Basic memory bitmaps freed
[    5.110145] PM: Starting manual resume from disk
[    5.110152] PM: Hibernation image partition 8:5 present
[    5.110155] PM: Looking for hibernation image.
[    5.110467] PM: Image not found (code -22)
[    5.110470] PM: Hibernation image not present or could not be loaded.
[    5.383032] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[    5.730322] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr
[    8.524904] preloadtrace: systemtap: 1.4/0.149, base: f0bd6000, memory: 30data/39text/6ctx/13net/260alloc kb, probes: 34
[    9.924258] udev[354]: starting version 166
[   10.177588] Floppy drive(s): fd0 is 1.44M
[   10.212960] FDC 0 is a post-1991 82077
[   10.547077] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   10.821595] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[   10.821710] ACPI: Power Button [PWRB]
[   10.821833] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   10.821888] ACPI: Power Button [PWRF]
[   10.924244] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   10.924317] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[   10.924382] scsi 3:0:1:0: Attached scsi generic sg2 type 5
[   11.096106] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   11.243632] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[   11.243643] cdrom: Uniform CD-ROM driver Revision: 3.20
[   11.243879] sr 3:0:0:0: Attached scsi CD-ROM sr0
[   11.252990] sr1: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
[   11.253210] sr 3:0:1:0: Attached scsi CD-ROM sr1
[   11.360766] gameport gameport0: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 1065kHz
[   11.556709] IT8712 SuperIO detected.
[   11.556911] parport_pc 00:09: reported by Plug and Play ACPI
[   11.556985] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   11.566401] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.680282] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[   11.680370] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   11.681192] eth0: VIA Rhine II at 0xde000000, 00:11:d8:ee:6a:00, IRQ 23.
[   11.681908] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[   11.801625] ppdev: user-space parallel port driver
[   12.335862] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001)
[   12.335891] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[   13.092030] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
[   13.596262] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
[   13.596287] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[   13.596463] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[   13.596627] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   14.110401] ALSA via82xx.c:591: codec_read: codec 0 is not valid [0xfe0000]
[   14.116583] ALSA via82xx.c:591: codec_read: codec 0 is not valid [0xfe0000]
[   14.122793] ALSA via82xx.c:591: codec_read: codec 0 is not valid [0xfe0000]
[   14.128962] ALSA via82xx.c:591: codec_read: codec 0 is not valid [0xfe0000]
[   14.579830] Adding 783356k swap on /dev/sda5.  Priority:-1 extents:1 across:783356k 
[   15.712360] device-mapper: uevent: version 1.0.3
[   15.713367] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[   19.035250] type=1400 audit(1343818703.032:2): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=786 comm="apparmor_parser"
[   19.178963] type=1400 audit(1343818703.176:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=791 comm="apparmor_parser"
[   19.518064] type=1400 audit(1343818703.516:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=795 comm="apparmor_parser"
[   19.739350] type=1400 audit(1343818703.736:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=799 comm="apparmor_parser"
[   20.702873] type=1400 audit(1343818704.700:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=804 comm="apparmor_parser"
[   20.703140] type=1400 audit(1343818704.700:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=804 comm="apparmor_parser"
[   20.703305] type=1400 audit(1343818704.700:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=804 comm="apparmor_parser"
[   20.703605] type=1400 audit(1343818704.700:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=804 comm="apparmor_parser"
[   21.182578] type=1400 audit(1343818705.180:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/deliver" pid=808 comm="apparmor_parser"
[   22.532531] type=1400 audit(1343818706.532:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/dovecot-auth" pid=812 comm="apparmor_parser"
[   24.348949] audit_printk_skb: 6 callbacks suppressed
[   24.348956] type=1400 audit(1343818708.348:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/managesieve-login" pid=824 comm="apparmor_parser"
[   24.746143] type=1400 audit(1343818708.744:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/pop3" pid=828 comm="apparmor_parser"
[   25.115831] type=1400 audit(1343818709.112:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/pop3-login" pid=832 comm="apparmor_parser"
[   25.562878] type=1400 audit(1343818709.560:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/avahi-daemon" pid=836 comm="apparmor_parser"
[   26.150565] type=1400 audit(1343818710.148:18): apparmor="STATUS" operation="profile_load" name="/usr/sbin/dnsmasq" pid=840 comm="apparmor_parser"
[   26.745173] type=1400 audit(1343818710.744:19): apparmor="STATUS" operation="profile_load" name="/usr/sbin/dovecot" pid=844 comm="apparmor_parser"
[   27.323614] type=1400 audit(1343818711.320:20): apparmor="STATUS" operation="profile_load" name="/usr/sbin/identd" pid=848 comm="apparmor_parser"
[   27.776469] type=1400 audit(1343818711.776:21): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mdnsd" pid=852 comm="apparmor_parser"
[   28.480882] type=1400 audit(1343818712.480:22): apparmor="STATUS" operation="profile_load" name="/usr/sbin/nmbd" pid=856 comm="apparmor_parser"
[   28.732503] type=1400 audit(1343818712.732:23): apparmor="STATUS" operation="profile_load" name="/usr/sbin/nscd" pid=860 comm="apparmor_parser"
[   29.753128] audit_printk_skb: 6 callbacks suppressed
[   29.753135] type=1400 audit(1343818713.752:26): apparmor="STATUS" operation="profile_load" name="/usr/sbin/smbldap-useradd" pid=872 comm="apparmor_parser"
[   29.753373] type=1400 audit(1343818713.752:27): apparmor="STATUS" operation="profile_load" name="/usr/sbin/smbldap-useradd///etc/init.d/nscd" pid=872 comm="apparmor_parser"
[   29.933520] type=1400 audit(1343818713.932:28): apparmor="STATUS" operation="profile_load" name="/usr/sbin/traceroute" pid=876 comm="apparmor_parser"
[   30.348728] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   30.453616] nf_conntrack version 0.5.0 (11981 buckets, 47924 max)
[   30.493551] ip_tables: (C) 2000-2006 Netfilter Core Team
[   31.501997] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[   36.414199] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   36.818042] NET: Registered protocol family 17
[   37.709644] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[   38.142418] powernow-k8: Processor cpuid 6a0 not supported
[   42.005925] vboxguest: VirtualBox Guest PCI device not found.
[   47.144011] eth0: no IPv6 routers present
[   62.013606] bootsplash: status on console 0 changed to on
[  111.721870] fuse init (API version 7.15)

Maxtech · 2 Aug. 2012

Scheint ein BUG zu sein spezifisch auf AMD Prozessor Infrastruktur und diesem Board Asus A7V600-X und dem 3.-er Kernel.

https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/968216

SUSEDJAlex · 4 Aug. 2012

Ich habe einen ähnliches System:
AMD Sempron 3000+, ASRock K8Upgrade-NF3, AMD Radeon 9600

Bei mir funktioniert das ohne mucken.
Daher tippe ich auch auf das Problem mit dem ASUS-Mainboard...

IDE wird noch unterstützt solange solche HDD verkauft werden....

LG DJ_Alexkoss

Maxtech · 6 Sep. 2012

Das Problem hat sich mit der neuen Ausgabe Opensuse 12.2. erledigt.
Die Installation ging wie zu früheren Zeiten problemlos.

Muss mich noch an KDE gewöhnen, da ich über die letzten 4 Jahren GNOME verwendete. Doch seit der Umstellung aus Unity finde ich KDE Bedienungsfreundlicher.

[erledigt] Opensuse 12.1 Live-CD hängt

Moderator