• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[erledigt] Sporadische Fastausfälle des Sounds

A

Anonymous

Gast
Hallo Leute,

in letzter Zeit erlebe ich es leider immer wieder, dass ich mit dem Firefox keinen Ton herausbekommen (der Ton ist so leise, der gilt nicht mehr). Mit dem VLC klappt es gut. Eben wollte ich morsen weiter üben (http://lcwo.net/)*. Um die Lautstärke zu festzulegen, klicke ich das Feld, in welchem mir der Übungsbuchstabe vorgespielt wird. Mit der Tastatur stelle ich mir meine Lautstärke ein und gut ist.

Das gleiche eben wieder und mein erstes Anhören klappte auch gut (ich habe den Rechner wieder aus dem Tiefschlaf geweckt). Aus irgendwelchen Gründen musste ich ein zweites mal mir den Buchstaben vorspielen lassen und seit dem ist Stille angesagt. VLC streamt mir weiterhin meine Radiomusik aber weder FF noch Chromium spielen mir meinen Übungstext vor. Interessant ist, dass sich Übersteuerungen über den ALSA-Playback-Regler hören lassen aber die Lautstärke nicht anheben. Im FF laufen die Übungen über HTML5.

Starte ich den FF über die Konsole, bekomme ich nur:

Code: 
~> firefox

(process:2479): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
Für mich nichts bedeutendes … Wenn es geht, möchte ich erst mal beim FF bleiben. Der Chromium schmeißt eine Fehlermeldung nach der anderen raus.

Wäre toll, wenn wir herausbekommen, woher solche Ausfälle kommen; und dann noch, wenn nicht die openSUSE-Macher Mist bauen ;).

Danke euch allen

sd0

*Zum Ausprobieren reicht zum Einloggen beide male "test" aus".
 
OP
A

Anonymous

Gast
P.s.: Jetzt hatte ich meinen PC für vielleicht 90 Minuten aus. Dann packte es mich und ich bootete ihn wieder; und höre da: Der Ton ist wieder da. Soweit schön.

Dennoch bitte ich um Hilfe, um hinter das Problem zu kommen.

Danke euch

sd0
 
OP
A

Anonymous

Gast
Auch wenn ich jetzt nerve: Auf meiner CW-Seite habe ich eine Lektion durchlaufen lassen. Klappte bestens. Um das zu schaffen, habe ich bestimmt zweimal mittels F5 die Seite neu laden lassen. Jedes mal wies der Fuchs mich darauf hin, dass einige Daten erneut übermittelt werden mussten. Kein Problem.

Lektion geschafft, nächstes Kapitel und: Lautstärke gleich null …

Und ich habe keine Ahnung, wer oder was zwischendurch abk…

sd0 :irre:
 
S

spoensche

Tritt das Problem auch bei anderen Webseiten oder auch beim lokalen abspielen von MP3's auf?

Was hast du für eine Soundkarte?
Code: 
/usr/sbin/hwinfo -sound

Was sagt den
Code: 
dmesg | egrep -i "err|warn|fail|fault"
 
OP
A

Anonymous

Gast
Als ich vor(?)gestern wieder das Problem hatte, klappte auf youtube alles bestens.

Code: 
:~> dmesg | egrep -i "err|warn|fail|fault"
[    0.000000] MTRR default type: uncachable
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: BIOS IRQ0 override ignored.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.002009] pid_max: default: 32768 minimum: 301
[    0.109591] ACPI: Using IOAPIC for interrupt routing
[    0.123343] acpi PNP0A03:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[    0.128838] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.128995] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.129154] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.129309] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.129468] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
[    0.129624] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[    0.129779] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.129938] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[    0.130100] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[    0.130259] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[    0.130418] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
[    0.130577] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[    0.130741] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[    0.130900] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.131064] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[    0.131223] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[    0.131382] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
[    0.131561] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.135169] NetLabel:  unlabeled traffic allowed by default
[    0.148635] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.221367] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.221881] PCI: CLS 64 bytes, default 64
[    0.786801] io scheduler cfq registered (default)
[    0.968082] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    0.973532] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[    1.031516] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[    5.152771] systemd[1]: Starting LSB: Set default boot entry if called...
[    7.821696] ACPI Warning: 0x0000000000000700-0x000000000000073f SystemIO conflicts with Region \_SB_.PCI0.SM00 1 (20130517/utaddress-251)
[    7.822271] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
[    8.331105] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[    8.538411] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[    9.008709] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
[   11.048037] type=1400 audit(1410098275.647:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=520 comm="apparmor_parser"
… und:

Code: 
:~> /usr/sbin/hwinfo -sound
oops: don't know what to do with "sound"

sd0
 
S

spoensche

Ich hab das
Code: 
ACPI Warning..SystemIO conflicts...
im Verdacht.

Poste mal bitte die Ausgaben von:
Code: 
sudo lspci -v | sed -rn /Audio/,/\s+\n/p
von
Code: 
cat /proc/asound cards

Code: 
pactl list
 
OP
A

Anonymous

Gast
Aber gerne …

Code: 
:~> sudo lspci -v | sed -rn /Audio/,/\s+\n/p
sudo: lspci: Kommando nicht gefunden

Code: 
~> cat /proc/asound cards
cat: /proc/asound: Ist ein Verzeichnis
cat: cards: Datei oder Verzeichnis nicht gefunden

Code: 
:~> pactl list
Modul #0
        Name: module-device-restore
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "Automatically restore the volume/mute state of devices"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #1
        Name: module-stream-restore
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "Automatically restore the volume/mute/device state of streams"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #2
        Name: module-card-restore
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "Automatically restore profile of cards"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #3
        Name: module-augment-properties
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "Augment the property sets of streams with additional static information"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #4
        Name: module-switch-on-port-available
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:


Modul #5
        Name: module-udev-detect
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "Detect available audio hardware and load matching drivers"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #6
        Name: module-alsa-card
        Argument: device_id="0" name="pci-0000_00_05.0" card_name="alsa_card.pci-0000_00_05.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
        Nutzungszähler: 0
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "ALSA Card"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #7
        Name: module-alsa-card
        Argument: device_id="1" name="pci-0000_02_00.1" card_name="alsa_card.pci-0000_02_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
        Nutzungszähler: 0
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "ALSA Card"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #8
        Name: module-jackdbus-detect
        Argument: channels=2
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "David Henningsson"
                module.description = "Adds JACK sink/source ports when JACK is started"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #9
        Name: module-bluetooth-policy
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Frédéric Dalleau"
                module.description = "When a bluetooth sink or source is added, load module-loopback"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #10
        Name: module-bluetooth-discover
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "João Paulo Rechi Vita"
                module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #11
        Name: module-bluez5-discover
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "João Paulo Rechi Vita"
                module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #12
        Name: module-esound-protocol-unix
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "ESOUND protocol (UNIX sockets)"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #13
        Name: module-native-protocol-unix
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "Native protocol (UNIX sockets)"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #14
        Name: module-default-device-restore
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "Automatically restore the default sink and source"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #15
        Name: module-rescue-streams
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #16
        Name: module-always-sink
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Colin Guthrie"
                module.description = "Hält stets einen Sink geladen, selbst wenn dies ein Null-Sink ist"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #17
        Name: module-intended-roles
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "Automatically set device of streams based on intended roles of devices"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #18
        Name: module-suspend-on-idle
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "When a sink/source is idle for too long, suspend it"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #19
        Name: module-console-kit
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "Create a client for each ConsoleKit session of this user"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #20
        Name: module-systemd-login
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "Create a client for each login session of this user"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #21
        Name: module-position-event-sounds
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #22
        Name: module-role-cork
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "Mute & cork streams with certain roles while others exist"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #23
        Name: module-filter-heuristics
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Colin Guthrie"
                module.description = "Detect when various filters are desirable"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #24
        Name: module-filter-apply
        Argument: 
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Colin Guthrie"
                module.description = "Load filter sinks automatically when needed"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #25
        Name: module-x11-publish
        Argument: display=:0
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "X11 credential publisher"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #26
        Name: module-device-manager
        Argument: do_routing=1
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Colin Guthrie"
                module.description = "Keep track of devices (and their descriptions) both past and present and prioritise by role"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #27
        Name: module-x11-cork-request
        Argument: display=:0
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "Synthesize X11 media key events when cork/uncork is requested"
                module.version = "4.0-270-g9490a-rebootstrapped"

Modul #28
        Name: module-x11-xsmp
        Argument: display=:0 session_manager=local/linux-sf54:@/tmp/.ICE-unix/2270,unix/linux-sf54:/tmp/.ICE-unix/2270
        Nutzungszähler: k. A.
        Eigenschaften:
                module.author = "Lennart Poettering"
                module.description = "X11 session management"
                module.version = "4.0-270-g9490a-rebootstrapped"

Sink #0
        State: SUSPENDED
        Name: alsa_output.pci-0000_00_05.0.analog-stereo
        Description: Internes Audio Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 6
        Mute: no
        Volume: front-left: 99957 / 153% / 11,00 dB,   front-right: 99957 / 153% / 11,00 dB
                balance 0,00
        Base Volume: 65536 / 100% / 0,00 dB
        Monitor Source: alsa_output.pci-0000_00_05.0.analog-stereo.monitor
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "VT1705 Analog"
                alsa.id = "VT1705 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "0"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xedef8000 irq 22"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:05.0"
                sysfs.path = "/devices/pci0000:00/0000:00:05.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "03f0"
                device.product.name = "MCP61 High Definition Audio"
                device.form_factor = "internal"
                device.string = "front:0"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Internes Audio Analog Stereo"
                alsa.mixer_name = "VIA VT1705"
                alsa.components = "HDA:11064397,18490397,00100000"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profile:
                analog-output: Analoge Ausgabe (priority: 9900)
                analog-output-lineout: Line Out (priority: 9900, not available)
                analog-output-headphones: Analoge Kopfhörer (priority: 9000)
        Aktive Profile: analog-output
        Formats:
                pcm

Sink #1
        State: SUSPENDED
        Name: alsa_output.pci-0000_02_00.1.hdmi-stereo
        Description: GF106 High Definition Audio Controller Digital Stereo (HDMI)
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 7
        Mute: no
        Volume: front-left: 71502 / 109% / 2,27 dB,   front-right: 71502 / 109% / 2,27 dB
                balance 0,00
        Base Volume: 65536 / 100% / 0,00 dB
        Monitor Source: alsa_output.pci-0000_02_00.1.hdmi-stereo.monitor
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS 
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "HDMI 0"
                alsa.id = "HDMI 0"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "3"
                alsa.card = "1"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xedf7c000 irq 18"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:02:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "0be9"
                device.product.name = "GF106 High Definition Audio Controller"
                device.string = "hdmi:1"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "hdmi-stereo"
                device.profile.description = "Digital Stereo (HDMI)"
                device.description = "GF106 High Definition Audio Controller Digital Stereo (HDMI)"
                alsa.mixer_name = "Nvidia GPU 11 HDMI/DP"
                alsa.components = "HDA:10de0011,10de0101,00100100"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profile:
                hdmi-output-0: HDMI / DisplayPort (priority: 5900, not available)
        Aktive Profile: hdmi-output-0
        Formats:
                pcm

Source #0
        State: SUSPENDED
        Name: alsa_output.pci-0000_00_05.0.analog-stereo.monitor
        Description: Monitor of Internes Audio Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 6
        Mute: no
        Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        Base Volume: 65536 / 100% / 0,00 dB
        Monitor of Sink: alsa_output.pci-0000_00_05.0.analog-stereo
        Latency: 0 usec, configured 0 usec
        Flags: DECIBEL_VOLUME LATENCY 
        Properties:
                device.description = "Monitor of Internes Audio Analog Stereo"
                device.class = "monitor"
                alsa.card = "0"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xedef8000 irq 22"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:05.0"
                sysfs.path = "/devices/pci0000:00/0000:00:05.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "03f0"
                device.product.name = "MCP61 High Definition Audio"
                device.form_factor = "internal"
                device.string = "0"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Formats:
                pcm

Source #1
        State: SUSPENDED
        Name: alsa_input.pci-0000_00_05.0.analog-stereo
        Description: Internes Audio Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 6
        Mute: no
        Volume: front-left: 65540 / 100% / 0,00 dB,   front-right: 65540 / 100% / 0,00 dB
                balance 0,00
        Base Volume: 6368 /  10% / -60,75 dB
        Monitor of Sink: k. A.
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "VT1705 Analog"
                alsa.id = "VT1705 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "0"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xedef8000 irq 22"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:05.0"
                sysfs.path = "/devices/pci0000:00/0000:00:05.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "03f0"
                device.product.name = "MCP61 High Definition Audio"
                device.form_factor = "internal"
                device.string = "front:0"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Internes Audio Analog Stereo"
                alsa.mixer_name = "VIA VT1705"
                alsa.components = "HDA:11064397,18490397,00100000"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profile:
                analog-input-front-mic: Front Microphone (priority: 8500)
                analog-input-rear-mic: Rear Microphone (priority: 8200, not available)
                analog-input-linein: Line In (priority: 8100, available)
        Aktive Profile: analog-input-front-mic
        Formats:
                pcm

Source #2
        State: SUSPENDED
        Name: alsa_output.pci-0000_02_00.1.hdmi-stereo.monitor
        Description: Monitor of GF106 High Definition Audio Controller Digital Stereo (HDMI)
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 7
        Mute: no
        Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        Base Volume: 65536 / 100% / 0,00 dB
        Monitor of Sink: alsa_output.pci-0000_02_00.1.hdmi-stereo
        Latency: 0 usec, configured 0 usec
        Flags: DECIBEL_VOLUME LATENCY 
        Properties:
                device.description = "Monitor of GF106 High Definition Audio Controller Digital Stereo (HDMI)"
                device.class = "monitor"
                alsa.card = "1"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xedf7c000 irq 18"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:02:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "0be9"
                device.product.name = "GF106 High Definition Audio Controller"
                device.string = "1"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Formats:
                pcm

Client #0
        Treiber: module-systemd-login.c
        Owner-Modul: 20
        Eigenschaften:
                application.name = "Login Session 1"
                systemd-login.session = "1"

Client #4
        Treiber: protocol-native.c
        Owner-Modul: 13
        Eigenschaften:
                application.name = "KMix"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "29"
                application.process.id = "2221"
                application.process.user = "sd0"
                application.process.host = "linux-sf54"
                application.process.binary = "kdeinit4"
                application.language = "de_DE.UTF-8"
                window.x11.display = ":0"
                application.process.machine_id = "1a6e04babefd49259755f5f9bd8b8f3c"
                application.process.session_id = "1"

Client #9
        Treiber: module-x11-xsmp.c
        Owner-Modul: 28
        Eigenschaften:
                application.name = "XSMP Session on KDE as 10119cae1db000141009833900000022700016"
                xsmp.vendor = "KDE"
                xsmp.client.id = "10119cae1db000141009833900000022700016"

Client #11
        Treiber: protocol-native.c
        Owner-Modul: 13
        Eigenschaften:
                application.name = "KMix"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "29"
                application.process.id = "2447"
                application.process.user = "sd0"
                application.process.host = "linux-sf54"
                application.process.binary = "kdeinit4"
                application.language = "de_DE.UTF-8"
                window.x11.display = ":0"
                application.process.machine_id = "1a6e04babefd49259755f5f9bd8b8f3c"
                application.process.session_id = "1"

Client #12
        Treiber: protocol-native.c
        Owner-Modul: 13
        Eigenschaften:
                application.name = "Thunderbird"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "29"
                window.x11.screen = "0"
                window.x11.display = ":0"
                application.process.id = "2518"
                application.process.user = "sd0"
                application.process.host = "linux-sf54"
                application.process.binary = "thunderbird-bin"
                application.language = "de_DE.UTF-8"
                application.process.machine_id = "1a6e04babefd49259755f5f9bd8b8f3c"
                application.process.session_id = "1"

Client #14
        Treiber: protocol-native.c
        Owner-Modul: 13
        Eigenschaften:
                application.name = "Firefox"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "29"
                window.x11.screen = "0"
                window.x11.display = ":0"
                application.process.id = "2885"
                application.process.user = "sd0"
                application.process.host = "linux-sf54"
                application.process.binary = "firefox"
                application.language = "de_DE.UTF-8"
                application.process.machine_id = "1a6e04babefd49259755f5f9bd8b8f3c"
                application.process.session_id = "1"
                application.icon_name = "firefox"

Client #15
        Treiber: protocol-native.c
        Owner-Modul: 13
        Eigenschaften:
                application.name = "Firefox"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "29"
                application.version = "32.0"
                application.icon_name = "firefox"
                application.process.id = "2885"
                application.process.user = "sd0"
                application.process.host = "linux-sf54"
                application.process.binary = "firefox"
                window.x11.display = ":0"
                application.language = "de_DE.UTF-8"
                application.process.machine_id = "1a6e04babefd49259755f5f9bd8b8f3c"
                application.process.session_id = "1"

Client #20
        Treiber: protocol-native.c
        Owner-Modul: 13
        Eigenschaften:
                application.name = "pactl"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "29"
                application.process.id = "5359"
                application.process.user = "sd0"
                application.process.host = "linux-sf54"
                application.process.binary = "pactl"
                application.language = "de_DE.UTF-8"
                window.x11.display = ":0"
                application.process.machine_id = "1a6e04babefd49259755f5f9bd8b8f3c"
                application.process.session_id = "1"

Karte #0
        Name: alsa_card.pci-0000_00_05.0
        Treiber: module-alsa-card.c
        Owner-Modul: 6
        Eigenschaften:
                alsa.card = "0"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xedef8000 irq 22"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:05.0"
                sysfs.path = "/devices/pci0000:00/0000:00:05.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "03f0"
                device.product.name = "MCP61 High Definition Audio"
                device.form_factor = "internal"
                device.string = "0"
                device.description = "Internes Audio"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profile:
                input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 60, available: yes)
                output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6000, available: yes)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6060, available: yes)
                off: Aus (sinks: 0, sources: 0, priority: 0, available: yes)
        Aktive Profile: output:analog-stereo+input:analog-stereo
        Profile:
                analog-input-front-mic: Front Microphone (priority: 8500, latency offset: 0 usec)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-input-rear-mic: Rear Microphone (priority: 8200, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-input-linein: Line In (priority: 8100, latency offset: 0 usec, available)
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-output: Analoge Ausgabe (priority: 9900, latency offset: 0 usec)
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-output-lineout: Line Out (priority: 9900, latency offset: 0 usec, not available)
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-output-headphones: Analoge Kopfhörer (priority: 9000, latency offset: 0 usec)
                        Properties:
                                device.icon_name = "audio-headphones"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo

Karte #1
        Name: alsa_card.pci-0000_02_00.1
        Treiber: module-alsa-card.c
        Owner-Modul: 7
        Eigenschaften:
                alsa.card = "1"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xedf7c000 irq 18"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:02:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "0be9"
                device.product.name = "GF106 High Definition Audio Controller"
                device.string = "1"
                device.description = "GF106 High Definition Audio Controller"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profile:
                output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5400, available: yes)
                output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 300, available: yes)
                output:hdmi-stereo-extra1: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5200, available: yes)
                output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 100, available: yes)
                output:hdmi-stereo-extra2: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5200, available: yes)
                output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 100, available: yes)
                output:hdmi-stereo-extra3: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5200, available: yes)
                output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 100, available: yes)
                off: Aus (sinks: 0, sources: 0, priority: 0, available: yes)
        Aktive Profile: output:hdmi-stereo
        Profile:
                hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo, output:hdmi-surround
                hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1
                hdmi-output-2: HDMI / DisplayPort 3 (priority: 5700, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2
                hdmi-output-3: HDMI / DisplayPort 4 (priority: 5600, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3
 
J

josef-wien

spoensche sollte sich angewöhnen, die Befehle zuerst einmal selbst auszuführen:
Code: 
/usr/sbin/hwinfo --sound
cat /proc/asound/cards
/sbin/lspci -v | sed -rn /Audio/,/\s+\n/p
 
S

spoensche

josef-wien schrieb:
spoensche sollte sich angewöhnen, die Befehle zuerst einmal selbst auszuführen:
Code: 
/usr/sbin/hwinfo --sound
cat /proc/asound/cards
/sbin/lspci -v | sed -rn /Audio/,/\s+\n/p
Zum Vergrößern anklicken....

Langsamer Tippen und das geschriebene noch mal durchlesen, dann passts auch mit den Befehlen. :)

Code: 
Sink 0
....
 Mute: no
 Volume: front-left: 99957 / 153% / 11,00 dB,   front-right: 99957 / 153% / 11,00 dB
 Base Volume: 65536 / 100% / 0,00 dB

Deine beiden Front Ausgänge sind übersteuert. Das kann u.U. zu deinem Problem führen, aber auch zu defekten an den Lautsprechern und dazu, dass dein Soundchip den Geist aufgibt.
 
OP
A

Anonymous

Gast
Das stimmt wohl. Zu laut kann ich letztlich nur an Verzerrungen festmachen.

Nun habe ich mir verschiedene Einstellungen angesehen. Ob nun im Soundmodul unter Yast, im Alsamixer oder im Mixer über die Taskleiste. Jetzt suche ich einen Weg, wie ich eine richtige Einstellung finde. Die fängt damit für mich an, dass ich mit der Lautsprecher-Plus-Taste bei 100 % nicht übersteure, egal aus welcher Anwendung.

Ideen?

sd0
 
OP
A

Anonymous

Gast
Bitte:

Code: 
:~> sudo /sbin/lspci -v |sed -rn '/Audio/,/\s+\n/p'
root's password:
00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
        Subsystem: ASRock Incorporation Device 0397
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
        Memory at edef8000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
        Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) (prog-if 8a [Master SecP PriP])
        Subsystem: ASRock Incorporation 939NF6G-VSTA Board
        Flags: bus master, 66MHz, fast devsel, latency 0
        [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
        [virtual] Memory at 000003f0 (type 3, non-prefetchable)
        [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
        [virtual] Memory at 00000370 (type 3, non-prefetchable)
        I/O ports at ffa0 [size=16]
        Capabilities: [44] Power Management version 2
        Kernel driver in use: pata_amd
        Kernel modules: pata_amd, pata_acpi, ata_generic

00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2)
        Subsystem: ASRock Incorporation 939NF6G-VSTA Board
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 43
        Memory at edefd000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at d080 [size=8]
        Capabilities: [44] Power Management version 2
        Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
        Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
        Kernel driver in use: forcedeth
        Kernel modules: forcedeth

00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: ASRock Incorporation 939NF6G-VSTA Board
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        I/O ports at d000 [size=8]
        I/O ports at cc00 [size=4]
        I/O ports at c880 [size=8]
        I/O ports at c800 [size=4]
        I/O ports at c480 [size=16]
        Memory at edefc000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
        Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
        Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
        Kernel driver in use: sata_nv
        Kernel modules: sata_nv, pata_acpi, ata_generic

00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: ASRock Incorporation 939NF6G-VSTA Board
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
        I/O ports at c400 [size=8]
        I/O ports at c080 [size=4]
        I/O ports at c000 [size=8]
        I/O ports at bc00 [size=4]
        I/O ports at b880 [size=16]
        Memory at edef7000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
        Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
        Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
        Kernel driver in use: sata_nv
        Kernel modules: sata_nv, pata_acpi, ata_generic

00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: edf00000-efffffff
        Prefetchable memory behind bridge: 00000000e0000000-00000000ebffffff
        Capabilities: [40] Subsystem: ASRock Incorporation 939NF6G-VSTA Board
        Capabilities: [48] Power Management version 2
        Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
        Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
        Capabilities: [80] Express Root Port (Slot+), MSI 00
        Capabilities: [100] Virtual Channel
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Capabilities: [40] Subsystem: ASRock Incorporation 939NF6G-VSTA Board
        Capabilities: [48] Power Management version 2
        Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
        Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
        Capabilities: [80] Express Root Port (Slot+), MSI 00
        Capabilities: [100] Virtual Channel
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        Capabilities: [40] Subsystem: ASRock Incorporation 939NF6G-VSTA Board
        Capabilities: [48] Power Management version 2
        Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
        Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
        Capabilities: [80] Express Root Port (Slot+), MSI 00
        Capabilities: [100] Virtual Channel
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
        Flags: fast devsel
        Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
        Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
        Flags: fast devsel
        Kernel modules: amd64_edac_mod

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
        Flags: fast devsel
        Capabilities: [f0] Secure device <?>
        Kernel driver in use: k8temp
        Kernel modules: k8temp

02:00.0 VGA compatible controller: NVIDIA Corporation GF106 [GeForce GTS 450] (rev a1) (prog-if 00 [VGA controller])
        Flags: bus master, fast devsel, latency 0, IRQ 44
        Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
        Memory at e0000000 (64-bit, prefetchable) [size=128M]
        Memory at e8000000 (64-bit, prefetchable) [size=32M]
        I/O ports at ec00 [size=128]
        [virtual] Expansion ROM at edf80000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 3
        Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [78] Express Endpoint, MSI 00
        Capabilities: [b4] Vendor Specific Information: Len=14 <?>
        Capabilities: [100] Virtual Channel
        Capabilities: [128] Power Budgeting <?>
        Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
        Kernel driver in use: nvidia
        Kernel modules: nvidiafb, nouveau, nvidia

02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1)
        Flags: bus master, fast devsel, latency 0, IRQ 18
        Memory at edf7c000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [60] Power Management version 3
        Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [78] Express Endpoint, MSI 00
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
sd0

P.s.: Seit dem Hinweis mit dem heftigen Übersteuern, achte ich wieder verstärkt mit meinen Ohren, auf die Lautstärke, die vom PC kommt. Als Orientierung habe ich die Lautstärke vom Kabelempfänger. Zwar nur ein grobes Maß, aber seit dem keine Ausfälle mehr. Trotzdem bin ich an dieser Runde weiter interessiert, Danke.
 
S

spoensche

Geh mal in dein BIOS und ändere mal den SATA Mode auf AHCI. Laut der Ausgabe arbeitet dein SATA Controller nämlich als IDE Controller. Hat zwar nichts mit Sound zu tun, aber die Festplattenperformance ist ja auch nicht unwichtig. ;)

Versuch mal folgendes:

1. Die Soundkonfiguration per Yast löschen.
2. Speichern und anschließend Yast beenden.
3. Yast starten und den Sound neu konfigurieren.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben