Garmin Ant Agent

[Coolzero]

Hallo, ich habe eine Garmin Forenrunner 405 Uhr, und die daten die darauf gespeichert werden werden über einen USB Stick an den PC übertragen, nur leider find ich die Treiber Software nur für Win und MAc!

Der Stick wird erkannt so wie es aussieht:

lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub                                        
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub                                        
Bus 002 Device 002: ID 04f2:b147 Chicony Electronics Co., Ltd                                         
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub                                        
Bus 003 Device 002: ID 0fcf:1004 Dynastream Innovations, Inc.                                         
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub                                        
Bus 004 Device 002: ID 0a5c:2151 Broadcom Corp.

dmesg

 884.137181] usb 3-2: new full speed USB device using ohci_hcd and address 2
[  884.356186] usb 3-2: New USB device found, idVendor=0fcf, idProduct=1004
[  884.356247] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  884.356296] usb 3-2: Product: Dynastream ANT2USB
[  884.356333] usb 3-2: Manufacturer: Silicon Labs
[  884.356370] usb 3-2: SerialNumber: 10110
[  884.356932] usb 3-2: configuration #1 chosen from 1 choice
[  884.503520] usbcore: registered new interface driver usbserial
[  884.503587] USB Serial support registered for generic
[  884.503710] usbcore: registered new interface driver usbserial_generic
[  884.503734] usbserial: USB Serial Driver core
[  884.520818] USB Serial support registered for cp210x
[  884.520937] cp210x 3-2:1.0: cp210x converter detected
[  884.696150] usb 3-2: reset full speed USB device using ohci_hcd and address 2
[  884.902673] usb 3-2: cp210x converter now attached to ttyUSB0
[  884.902801] usbcore: registered new interface driver cp210x
[  884.902848] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[ 1042.180137] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.0.100 DST=91.203.99.45 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=30048 DF PROTO=TCP SPT=54841 DPT=80 WINDOW=6688 RES=0x00 ACK FIN URGP=0
[ 1043.668134] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.0.100 DST=91.203.99.45 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=47691 DF PROTO=TCP SPT=54839 DPT=80 WINDOW=8047 RES=0x00 ACK FIN URGP=0
[ 1043.672114] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.0.100 DST=91.203.99.45 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=31337 DF PROTO=TCP SPT=54840 DPT=80 WINDOW=7930 RES=0x00 ACK FIN URGP=0
[ 1046.604148] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.0.100 DST=91.203.99.45 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=43820 DF PROTO=TCP SPT=54845 DPT=80 WINDOW=6732 RES=0x00 ACK FIN URGP=0

Wäre super wenn einer eine Lösung hätte

 

[Coolzero]

Keiner eine Lösung?

 

[misiu]

Leider kenne ich da keine Lösung, aber im Net ist mir dieses untergekommen:
http://forum.runnersworld.de/forum/garmin-forerunner/37041-linux-programm-fuer-den-forerunner.html

MfG
misiu

 

[misiu]

Demnach:
http://www.thefloatingfrog.co.uk/geek-hobbies/garmin-forerunner-305405-musings/

ist auch Software/Treiber entwickelt worden, der aber selbst übersetzt werden muss:
Zitat:

cd /tmp
wget http://cgit.get-open.com/cgit.cgi/gant/snapshot/gant-master.tar.bz2
tar -xjf gant-master.tar.bz2
cd gant-master
make clean
make

MfG
misiu

 

[Coolzero]

Ok das hab ich gemacht,
in der Readme steht dann folgendes:

Usage:

Put 405 in pairing mode
./gant -f paul -a auth405

This gives your garmin a name of "paul" and an auth file of "auth405"
The 405 will ask you if you wish to pair with "paul". Obviously
you might want to use a different name :)

Download with:
./gant -nza auth405 > output

or -Dnza if you want lots of debug output

It doesn't seem to be very reliable at starting the download and
I haven't investigated why yet. So, if it doesn't start downloading
press ctrl-c and try again. I find it helps to take the watch out
of power save mode.

If you've already downloaded the data, then you'll need to set
"force send" to yes on the watch.

Compare output with .TCX file produce by windows ANT Agent.

Aber wen ich

 ./gant -f paul -a auth405

passiert nichts!

Noch einer eine idee?

 

[misiu]

Bitte wende dich mit deinen Fragen an den Entwickler der Software:
jordan.miller@get-open.com

MfG
misiu