• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[Gelöst] Bluetooth (Toshiba/Broadcom) nicht aktiviert

OP
1

18301

Code: 
dmesg | grep -Ei 'blue|hci'
[    3.945066] sdhci: Secure Digital Host Controller Interface driver
[    3.945072] sdhci: Copyright(c) Pierre Ossman
[    4.007969] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.007999] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    4.009274] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    4.009286] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    4.009584] usb usb1: Product: xHCI Host Controller
[    4.009586] usb usb1: Manufacturer: Linux 4.4.49-16-default xhci-hcd
[    4.022649] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.022664] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    4.024766] usb usb2: Product: xHCI Host Controller
[    4.024768] usb usb2: Manufacturer: Linux 4.4.49-16-default xhci-hcd
[    4.032984] ahci 0000:00:13.0: version 3.0
[    4.033237] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
[    4.033459] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    4.033465] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso 
[    4.056861] scsi host0: ahci
[    4.058009] scsi host1: ahci
[    4.332409] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[    4.736925] usb 1-4.2: new full-speed USB device number 3 using xhci_hcd
[    4.901199] usb 1-4.3: new high-speed USB device number 4 using xhci_hcd
[    5.265780] usb 1-4.3.3: new low-speed USB device number 5 using xhci_hcd
[   14.393713] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
[   17.665416] Bluetooth: Core ver 2.21
[   17.665455] Bluetooth: HCI device and connection manager initialized
[   17.665461] Bluetooth: HCI socket layer initialized
[   17.665464] Bluetooth: L2CAP socket layer initialized
[   17.665474] Bluetooth: SCO socket layer initialized
[   17.908064] Bluetooth: hci0: BCM: chip id 70
[   17.924048] Bluetooth: hci0: linux-60bs
[   17.924055] Bluetooth: hci0: BCM (001.001.011) build 0000
[   17.998479] bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
[   17.998485] Bluetooth: hci0: BCM: Patch brcm/BCM.hcd not found
[   21.525723] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.525728] Bluetooth: BNEP filters: protocol multicast
[   21.525733] Bluetooth: BNEP socket layer initialized
[   64.119107] Bluetooth: RFCOMM TTY layer initialized
[   64.119117] Bluetooth: RFCOMM socket layer initialized
[   64.119125] Bluetooth: RFCOMM ver 1.11
[ 1148.214116] usb 1-1: new full-speed USB device number 6 using xhci_hcd
Code: 
ls -al /lib/firmware/brcm | grep -i bcm
-rw-r--r-- 1 root root  34997 26. Mär 15:12 BCM20702A0-05ac-21e1.hcd
-rw-r--r-- 1 root root  35000 26. Mär 15:12 BCM20702A1-0b05-17cb.hcd
-rw-r--r-- 1 root root  35127 26. Mär 15:12 BCM20702A1-0b05-17cf.hcd
-rw-r--r-- 1 root root 269595 16. Mai 2016  bcm4329-fullmac-4.bin
-rw-r--r-- 1 root root  96224 16. Mai 2016  bcm43xx-0.fw
-rw-r--r-- 1 root root    180 16. Mai 2016  bcm43xx_hdr-0.fw
frank@linux-60bs:~>
 
S

Sauerland

Öffne eine Konsole als User, dann:
Code: 
wget https://github.com/winterheart/broadcom-bt-firmware/raw/master/brcm/BCM43142A0-0930-0225.hcd
Werde in der weiterhin geöffeneten Konsole mit su zu root, danach:
Code: 
cp BCM43142A0-0930-0225.hcd /lib/firmware/brcm/BCM43142A0-0930-0225.hcd
Code: 
cp BCM43142A0-0930-0225.hcd /lib/firmware/brcm/BCM.hcd
Ob letzter Befehl nötig ist, keine Ahnung (Es wird immer BCM.hcd angemeckert, deswegen vorsichtshalber).
Code: 
modprobe -rv btusb
Code: 
modprobe -v btusb

Und schauen ob es geht.
Ansonsten noch einmal:
Code: 
dmesg | grep -Ei 'blue|hci'
 
S

Sauerland

Schön das es funktioniert....

Kannst du aber noch einmal
Code: 
dmesg | grep -Ei 'blue|hci'
posten, damit ich die Unterschiede sehe?
 
OP
1

18301

Logo :D
Code: 
 dmesg | grep -Ei 'blue|hci'
[    3.945066] sdhci: Secure Digital Host Controller Interface driver
[    3.945072] sdhci: Copyright(c) Pierre Ossman
[    4.007969] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.007999] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    4.009274] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    4.009286] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    4.009584] usb usb1: Product: xHCI Host Controller
[    4.009586] usb usb1: Manufacturer: Linux 4.4.49-16-default xhci-hcd
[    4.022649] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.022664] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    4.024766] usb usb2: Product: xHCI Host Controller
[    4.024768] usb usb2: Manufacturer: Linux 4.4.49-16-default xhci-hcd
[    4.032984] ahci 0000:00:13.0: version 3.0
[    4.033237] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
[    4.033459] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    4.033465] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso 
[    4.056861] scsi host0: ahci
[    4.058009] scsi host1: ahci
[    4.332409] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[    4.736925] usb 1-4.2: new full-speed USB device number 3 using xhci_hcd
[    4.901199] usb 1-4.3: new high-speed USB device number 4 using xhci_hcd
[    5.265780] usb 1-4.3.3: new low-speed USB device number 5 using xhci_hcd
[   14.393713] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
[   17.665416] Bluetooth: Core ver 2.21
[   17.665455] Bluetooth: HCI device and connection manager initialized
[   17.665461] Bluetooth: HCI socket layer initialized
[   17.665464] Bluetooth: L2CAP socket layer initialized
[   17.665474] Bluetooth: SCO socket layer initialized
[   17.908064] Bluetooth: hci0: BCM: chip id 70
[   17.924048] Bluetooth: hci0: linux-60bs
[   17.924055] Bluetooth: hci0: BCM (001.001.011) build 0000
[   17.998479] bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
[   17.998485] Bluetooth: hci0: BCM: Patch brcm/BCM.hcd not found
[   21.525723] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.525728] Bluetooth: BNEP filters: protocol multicast
[   21.525733] Bluetooth: BNEP socket layer initialized
[   64.119107] Bluetooth: RFCOMM TTY layer initialized
[   64.119117] Bluetooth: RFCOMM socket layer initialized
[   64.119125] Bluetooth: RFCOMM ver 1.11
[ 1148.214116] usb 1-1: new full-speed USB device number 6 using xhci_hcd
[ 3669.728396] Bluetooth: hci0 urb ffff880252ff5900 failed to resubmit (2)
[ 3685.035511] Bluetooth: hci0: BCM: chip id 70
[ 3685.051509] Bluetooth: hci0: linux-60bs
[ 3685.051516] Bluetooth: hci0: BCM (001.001.011) build 0000
[ 3685.696521] Bluetooth: hci0: BCM (001.001.011) build 0334
[ 3685.712504] Bluetooth: hci0: Broadcom Bluetooth Device (43142)

sagt mir alles nichts
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben