[gelöst] boot failure nach upgrade auf 11.4

mafg · 20 März 2011

Hallo!

Auf meinem Lenovo 300 N200 habe ich ein upgrade von 11.2 auf 11.4 vorgenommen.
Das upgrade habe ich nicht per Yast, sondern mit Hilfe des Isoimages zur Netzinstallation durchgeführt. Danach zeigt mein Notebook folgendes verhalten:
Beim booten mit dem Default Kernel bleibt der Bootvorgang sofort hängen und der Rechner reagiert auf keinerlei Eingaben mehr. Beim Booten in den Failsafe Modus fährt er ohne murren hoch. Wenn ich danach den Rechner neu starte (soft reboot), fährt er auch ohne Probleme im normalen Modus hoch.

Bislang habe ich noch keine Berichte über so ein Problem gefunden und habe leider auch keine Ahnung, wie ich mich dem nähern soll. In

Code:

dmesg

habe ich keine Hinweise auf ein Problem gefunden und auch in

Code:

/var/log/messages

gibt es keine Einträge, die einen Fehler dokumentieren.

Ich wäre erst mal für Tips dankbar, wie ich mit der Diagnose weiter komme.

Danke!
Matthias

Justaff · 20 März 2011

hi,

ich hab ein "ähnliches" Problem: kann Suse 11.4 nicht installieren, weil die Tastatur blockiert ist. :???:
( siehe http://www.linux-club.de/viewtopic.php?f=3&t=112983#p706447)

Gruß
Justaff

spoensche · 20 März 2011

@mafg:

Wo bleibt der Rechner den beim Bootvorgang hängen? Poste trotzdem mal die Ausgabe von

Code:

dmesg

Justaff · 20 März 2011

mafg schrieb:
Beim booten mit dem Default Kernel bleibt der Bootvorgang sofort hängen und der Rechner reagiert auf keinerlei Eingaben mehr. Beim Booten in den Failsafe Modus fährt er ohne murren hoch. Wenn ich danach den Rechner neu starte (soft reboot), fährt er auch ohne Probleme im normalen Modus hoch.

Hi Matthias,

auch auf die Gefahr hin, daß ich völlig daneben liege: schau doch mal bei mir vorbei: http://www.linux-club.de/viewtopic.php?f=3&t=112983#p706447 und http://www.linux-club.de/viewtopic.php?f=27&t=110141#p684693

Gruß
Justaff

mafg · 20 März 2011

Hallo,

hier ist der Output von

Code:

dmesg

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37.1-1.2-pae (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP 2011-02-21 10:34:10 +0100
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 0769EAG/IEL10, BIOS 68ET31WW 12/21/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f6d0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f72c0] f72c0
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] initial memory mapped : 0 - 01000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000371fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00371fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 371fe000 @ ff6000-1000000
[ 0.000000] RAMDISK: 37521000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 3672f000 - 371fd67b
[ 0.000000] Move RAMDISK from 0000000037521000 - 0000000037fef67a to 3672f000 - 371fd67a
[ 0.000000] ACPI: RSDP 000f7240 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 7f6d860d 00094 (v01 LENOVO TP-68 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 7f6dfbd2 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 7f6d9b4b 06013 (v02 TOSCPL CRESTLNE 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS 7f6e2fc0 00040
[ 0.000000] ACPI: APIC 7f6dfcc6 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 7f6dfd2e 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 7f6dfd66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 7f6dfda2 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TMOR 7f6dfdd4 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: SLIX 7f6dfdfa 00176 (v01 LENOVO TP-68 06040000 TBD 00000001)
[ 0.000000] ACPI: APIC 7f6dff70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 7f6dffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 7f6d989e 002AD (v01 SataRe SataAhci 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7f6d97fb 000A3 (v01 BrtRef DD01BRT 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7f6d8c2d 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7f6d8b87 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7f6d86a1 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] could not find any ACPI SRAT memory areas.
[ 0.000000] failed to get NUMA memory information from SRAT table
[ 0.000000] NUMA - single node, flat memory mode
[ 0.000000] Node: 0, start_pfn: 0, end_pfn: 7f6d0
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000 60000 64000 68000 6c000 70000 74000 78000 7c000
[ 0.000000] node 0 pfn: [0 - 7f6d0]
[ 0.000000] Reserving 4096 pages of KVA for lmem_map of node 0 at 7e600
[ 0.000000] Reserving total of 1000 pages for numa KVA remap
[ 0.000000] kva_start_pfn ~ 35600 max_low_pfn ~ 371fe
[ 0.000000] max_pfn = 7f6d0
[ 0.000000] 1156MB HIGHMEM available.
[ 0.000000] 881MB LOWMEM available.
[ 0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe
[ 0.000000] Low memory ends at vaddr f71fe000
[ 0.000000] node 0 will remap to vaddr f5600000 - f6600000
[ 0.000000] allocate_pgdat: node 0 NODE_DATA f5600000
[ 0.000000] remap_numa_kva: node 0
[ 0.000000] remap_numa_kva: f5600000 to pfn 0007e600
[ 0.000000] remap_numa_kva: f5800000 to pfn 0007e800
[ 0.000000] remap_numa_kva: f5a00000 to pfn 0007ea00
[ 0.000000] remap_numa_kva: f5c00000 to pfn 0007ec00
[ 0.000000] remap_numa_kva: f5e00000 to pfn 0007ee00
[ 0.000000] remap_numa_kva: f6000000 to pfn 0007f000
[ 0.000000] remap_numa_kva: f6200000 to pfn 0007f200
[ 0.000000] remap_numa_kva: f6400000 to pfn 0007f400
[ 0.000000] High memory starts at vaddr f71fe000
[ 0.000000] mapped low ram: 0 - 371fe000
[ 0.000000] low ram: 0 - 371fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000371fe
[ 0.000000] HighMem 0x000371fe -> 0x0007f6d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f6d0
[ 0.000000] On node 0 totalpages: 521823
[ 0.000000] free_area_init_node: node 0, pgdat f5600000, node_mem_map f5602200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1732 pages used for memmap
[ 0.000000] Normal zone: 219962 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2314 pages used for memmap
[ 0.000000] HighMem zone: 293832 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] MPTABLE: OEM ID: INTEL
[ 0.000000] MPTABLE: Product ID: S. Rosa CRB
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 Version 32 at 0xFEC00000.
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] Processors: 2
[ 0.000000] 2 Processors exceeds max_cpus limit of 0
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:8
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f5400000 s28032 r0 d21120 u2097152
[ 0.000000] pcpu-alloc: s28032 r0 d21120 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517745
[ 0.000000] Policy zone: HighMem
[ 0.000000] Kernel command line: root=/dev/sda2 ide=nodma apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x361
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10438400 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000371fe:0007f6d0)
[ 0.000000] Memory: 2023176k/2087744k available (4343k kernel code, 47732k reserved, 3305k data, 448k init, 1168200k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff5b4000 - 0xfffff000 (10540 kB)
[ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB)
[ 0.000000] vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB)
[ 0.000000] .init : 0xc0979000 - 0xc09e9000 ( 448 kB)
[ 0.000000] .data : 0xc063dc3d - 0xc0978308 (3305 kB)
[ 0.000000] .text : 0xc0200000 - 0xc063dc3d (4343 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:8448 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f440c000 soft=f440e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1729.361 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.72 BogoMIPS (lpj=6917444)
[ 0.004015] pid_max: default: 32768 minimum: 301
[ 0.004073] Security Framework initialized
[ 0.004098] AppArmor: AppArmor initialized
[ 0.004172] Mount-cache hash table entries: 512
[ 0.004329] Initializing cgroup subsys ns
[ 0.004335] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004343] Initializing cgroup subsys cpuacct
[ 0.004349] Initializing cgroup subsys memory
[ 0.004367] Initializing cgroup subsys devices
[ 0.004372] Initializing cgroup subsys freezer
[ 0.004376] Initializing cgroup subsys net_cls
[ 0.004381] Initializing cgroup subsys blkio
[ 0.004425] CPU: Unsupported number of siblings 2
[ 0.004430] mce: CPU supports 6 MCE banks
[ 0.004442] CPU0: Thermal monitoring handled by SMI
[ 0.004446] using mwait in idle threads.
[ 0.004457] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.004466] PEBS disabled due to CPU errata.
[ 0.004471] ... version: 2
[ 0.004474] ... bit width: 40
[ 0.004478] ... generic registers: 2
[ 0.004482] ... value mask: 000000ffffffffff
[ 0.004486] ... max period: 000000007fffffff
[ 0.004490] ... fixed-purpose events: 3
[ 0.004494] ... event mask: 0000000700000003
[ 0.005043] SMP alternatives: switching to UP code
[ 0.015602] Freeing SMP alternatives: 28k freed
[ 0.015615] ACPI: Core revision 20101013
[ 0.026667] ACPI: setting ELCR to 0200 (from 0ca0)
[ 0.028090] SMP mode deactivated.
[ 0.028102] SMP disabled
[ 0.028106] Mapping cpu 0 to node 0
[ 0.032241] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.032313] Brought up 1 CPUs
[ 0.032319] Total of 1 processors activated (3458.72 BogoMIPS).
[ 0.032444] devtmpfs: initialized
[ 0.032754] regulator: core version 0.5
[ 0.032815] regulator: dummy:
[ 0.032845] Time: 8:45:02 Date: 03/20/11
[ 0.032904] NET: Registered protocol family 16
[ 0.033134] ACPI: bus type pci registered
[ 0.033234] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.033244] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.033248] PCI: Using MMCONFIG for extended config space
[ 0.033252] PCI: Using configuration type 1 for base access
[ 0.034145] bio: create slab <bio-0> at 0
[ 0.035845] ACPI: EC: Look up EC in DSDT
[ 0.040108] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.041486] ACPI: SSDT 7f6d94fb 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.041899] ACPI: Dynamic OEM Table Load:
[ 0.041906] ACPI: SSDT (null) 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.044244] ACPI: SSDT 7f6d8e8c 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.044619] ACPI: Dynamic OEM Table Load:
[ 0.044624] ACPI: SSDT (null) 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.045179] ACPI: SSDT 7f6d9733 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.045568] ACPI: Dynamic OEM Table Load:
[ 0.045574] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.045789] ACPI: SSDT 7f6d9476 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.046160] ACPI: Dynamic OEM Table Load:
[ 0.046166] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.064163] ACPI: Interpreter enabled
[ 0.064171] ACPI: (supports S0 S3 S4 S5)
[ 0.064203] ACPI: Using PIC for interrupt routing
[ 0.113092] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.113355] ACPI: No dock devices found.
[ 0.113362] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.114274] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.116085] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.116089] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.116093] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.116097] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.116100] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.116104] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
[ 0.116107] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
[ 0.116122] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[ 0.116178] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
[ 0.116196] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfc0fffff 64bit]
[ 0.116207] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.116215] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.116256] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
[ 0.116271] pci 0000:00:02.1: reg 10: [mem 0xfc100000-0xfc1fffff 64bit]
[ 0.116371] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.116436] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
[ 0.116483] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.116546] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]
[ 0.116608] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.116636] pci 0000:00:1a.7: reg 10: [mem 0xfc504800-0xfc504bff]
[ 0.116739] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.116746] pci 0000:00:1a.7: PME# disabled
[ 0.116778] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.116804] pci 0000:00:1b.0: reg 10: [mem 0xfc300000-0xfc303fff 64bit]
[ 0.116900] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.116906] pci 0000:00:1b.0: PME# disabled
[ 0.116937] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.117037] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.117043] pci 0000:00:1c.0: PME# disabled
[ 0.117077] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
[ 0.117177] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.117182] pci 0000:00:1c.1: PME# disabled
[ 0.117217] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
[ 0.117317] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.117322] pci 0000:00:1c.2: PME# disabled
[ 0.117357] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
[ 0.117457] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.117463] pci 0000:00:1c.3: PME# disabled
[ 0.117499] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.117564] pci 0000:00:1d.0: reg 20: [io 0x1860-0x187f]
[ 0.117611] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.117678] pci 0000:00:1d.1: reg 20: [io 0x1880-0x189f]
[ 0.117723] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.117789] pci 0000:00:1d.2: reg 20: [io 0x18a0-0x18bf]
[ 0.117850] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.117878] pci 0000:00:1d.7: reg 10: [mem 0xfc504c00-0xfc504fff]
[ 0.117980] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.117987] pci 0000:00:1d.7: PME# disabled
[ 0.118012] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.118110] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[ 0.118223] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.118232] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.118241] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.118249] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[ 0.118301] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[ 0.118320] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.118334] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.118348] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.118362] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.118377] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.118436] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
[ 0.118467] pci 0000:00:1f.2: reg 10: [io 0x1c00-0x1c07]
[ 0.118480] pci 0000:00:1f.2: reg 14: [io 0x18d4-0x18d7]
[ 0.118495] pci 0000:00:1f.2: reg 18: [io 0x18d8-0x18df]
[ 0.118508] pci 0000:00:1f.2: reg 1c: [io 0x18d0-0x18d3]
[ 0.118522] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.118536] pci 0000:00:1f.2: reg 24: [mem 0xfc504000-0xfc5047ff]
[ 0.118591] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.118596] pci 0000:00:1f.2: PME# disabled
[ 0.118621] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.118640] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.118689] pci 0000:00:1f.3: reg 20: [io 0x1c20-0x1c3f]
[ 0.118801] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.118810] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.118816] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.118826] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.118957] pci 0000:04:00.0: [8086:4227] type 0 class 0x000280
[ 0.119013] pci 0000:04:00.0: reg 10: [mem 0xf8000000-0xf8000fff]
[ 0.119356] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.119369] pci 0000:04:00.0: PME# disabled
[ 0.119439] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.119473] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.119481] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.119487] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.119496] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.119566] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.119575] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.119580] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.119590] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.119733] pci 0000:06:00.0: [14e4:1713] type 0 class 0x000200
[ 0.119803] pci 0000:06:00.0: reg 10: [mem 0xc8000000-0xc800ffff 64bit]
[ 0.120127] pci 0000:06:00.0: PME# supported from D3hot D3cold
[ 0.120139] pci 0000:06:00.0: PME# disabled
[ 0.120275] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.120283] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.120289] pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff]
[ 0.120299] pci 0000:00:1c.3: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.120361] pci 0000:08:06.0: [1180:0832] type 0 class 0x000c00
[ 0.120379] pci 0000:08:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.120385] pci 0000:08:06.0: MMC cards are now supported by standard SDHCI controller
[ 0.120406] pci 0000:08:06.0: reg 10: [mem 0xfc200000-0xfc2007ff]
[ 0.120502] pci 0000:08:06.0: supports D1 D2
[ 0.120505] pci 0000:08:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.120511] pci 0000:08:06.0: PME# disabled
[ 0.120535] pci 0000:08:06.1: [1180:0822] type 0 class 0x000805
[ 0.120561] pci 0000:08:06.1: reg 10: [mem 0xfc200800-0xfc2008ff]
[ 0.120656] pci 0000:08:06.1: supports D1 D2
[ 0.120659] pci 0000:08:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.120665] pci 0000:08:06.1: PME# disabled
[ 0.120690] pci 0000:08:06.2: [1180:0592] type 0 class 0x000880
[ 0.120714] pci 0000:08:06.2: reg 10: [mem 0xfc201000-0xfc2010ff]
[ 0.120810] pci 0000:08:06.2: supports D1 D2
[ 0.120812] pci 0000:08:06.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.120818] pci 0000:08:06.2: PME# disabled
[ 0.120841] pci 0000:08:06.3: [1180:0852] type 0 class 0x000880
[ 0.120866] pci 0000:08:06.3: reg 10: [mem 0xfc201400-0xfc2014ff]
[ 0.120961] pci 0000:08:06.3: supports D1 D2
[ 0.120963] pci 0000:08:06.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.120969] pci 0000:08:06.3: PME# disabled
[ 0.121030] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 0.121039] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.121045] pci 0000:00:1e.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 0.121054] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.121057] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.121060] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.121101] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.121496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.121609] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.121723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.121834] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.121989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.133286] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.133388] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.133487] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.133584] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.133683] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.133782] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.133880] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.133978] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.134019] HEST: Table is not found!
[ 0.134260] SCSI subsystem initialized
[ 0.134334] libata version 3.00 loaded.
[ 0.134415] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.134434] vgaarb: loaded
[ 0.134534] PCI: Using ACPI for IRQ routing
[ 0.134540] PCI: pci_cache_line_size set to 64 bytes
[ 0.134679] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.134682] reserve RAM buffer: 000000007f6d0000 - 000000007fffffff
[ 0.134810] NetLabel: Initializing
[ 0.134815] NetLabel: domain hash size = 128
[ 0.134818] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.134834] NetLabel: unlabeled traffic allowed by default
[ 0.134842] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.134852] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.134859] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.140048] Switching to clocksource tsc
[ 0.141436] AppArmor: AppArmor Filesystem Enabled
[ 0.141459] pnp: PnP ACPI init
[ 0.141488] ACPI: bus type pnp registered
[ 0.142430] pnp 00:00: [bus 00-ff]
[ 0.142434] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.142437] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.142440] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.142443] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.142446] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.142449] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.142452] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.142454] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.142457] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.142460] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.142463] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.142466] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.142468] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.142471] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.142474] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.142477] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.142480] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.142483] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[ 0.142486] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.142488] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.142572] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.142773] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.142776] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.142779] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.142782] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.142784] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.142787] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.142790] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.142792] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.142868] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.143223] pnp 00:02: [io 0x0000-0x001f]
[ 0.143226] pnp 00:02: [io 0x0081-0x0091]
[ 0.143228] pnp 00:02: [io 0x0093-0x009f]
[ 0.143231] pnp 00:02: [io 0x00c0-0x00df]
[ 0.143234] pnp 00:02: [dma 4]
[ 0.143287] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.143301] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.143353] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.143491] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.143562] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.143581] pnp 00:05: [io 0x00f0]
[ 0.143585] pnp 00:05: [irq 13]
[ 0.143637] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.143654] pnp 00:06: [io 0x002e-0x002f]
[ 0.143656] pnp 00:06: [io 0x004e-0x004f]
[ 0.143659] pnp 00:06: [io 0x0061]
[ 0.143661] pnp 00:06: [io 0x0063]
[ 0.143663] pnp 00:06: [io 0x0065]
[ 0.143666] pnp 00:06: [io 0x0067]
[ 0.143668] pnp 00:06: [io 0x0080]
[ 0.143670] pnp 00:06: [io 0x0092]
[ 0.143672] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.143675] pnp 00:06: [io 0x0680-0x069f]
[ 0.143677] pnp 00:06: [io 0x0800-0x080f]
[ 0.143680] pnp 00:06: [io 0x1000-0x107f]
[ 0.143682] pnp 00:06: [io 0x1180-0x11bf]
[ 0.143685] pnp 00:06: [io 0xfe00]
[ 0.143687] pnp 00:06: [io 0xff00-0xff7f]
[ 0.143774] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.143789] pnp 00:07: [io 0x0070-0x0077]
[ 0.143792] pnp 00:07: [irq 8]
[ 0.143844] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.159968] pnp 00:08: [io 0x0060]
[ 0.159973] pnp 00:08: [io 0x0064]
[ 0.159976] pnp 00:08: [irq 1]
[ 0.160034] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.160048] pnp 00:09: [irq 12]
[ 0.160105] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.160140] pnp: PnP ACPI: found 10 devices
[ 0.160146] ACPI: ACPI bus type pnp unregistered
[ 0.160162] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.160169] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.160175] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.160180] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.160186] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.160192] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.160198] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.160204] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.160214] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.160224] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.160230] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.160236] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.160241] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.160247] system 00:06: [io 0xfe00] has been reserved
[ 0.160253] system 00:06: [io 0xff00-0xff7f] has been reserved
[ 0.197379] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80000000-0x800000ff]
[ 0.197393] pci 0000:00:1f.3: BAR 0: set to [mem 0x80000000-0x800000ff] (PCI address [0x80000000-0x800000ff])
[ 0.197401] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.197407] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.197417] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.197426] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.197439] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.197446] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.197456] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.197464] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.197477] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.197483] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.197493] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.197502] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.197515] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.197521] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.197530] pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff]
[ 0.197538] pci 0000:00:1c.3: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.197551] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 0.197556] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.197565] pci 0000:00:1e.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 0.197573] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.197754] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.197761] PCI: setting IRQ 11 as level-triggered
[ 0.197767] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.197779] pci 0000:00:1c.0: setting latency timer to 64
[ 0.197918] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[ 0.197924] PCI: setting IRQ 5 as level-triggered
[ 0.197931] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
[ 0.197941] pci 0000:00:1c.1: setting latency timer to 64
[ 0.198079] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
[ 0.198084] PCI: setting IRQ 7 as level-triggered
[ 0.198091] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
[ 0.198101] pci 0000:00:1c.2: setting latency timer to 64
[ 0.198238] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.198245] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.198254] pci 0000:00:1c.3: setting latency timer to 64
[ 0.198264] pci 0000:00:1e.0: setting latency timer to 64
[ 0.198270] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.198273] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.198276] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.198279] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.198282] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.198285] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.198288] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.198291] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.198294] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.198296] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.198299] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.198302] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
[ 0.198305] pci_bus 0000:06: resource 1 [mem 0xc8000000-0xc9ffffff]
[ 0.198308] pci_bus 0000:06: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.198311] pci_bus 0000:08: resource 1 [mem 0xfc200000-0xfc2fffff]
[ 0.198314] pci_bus 0000:08: resource 4 [io 0x0000-0xffff]
[ 0.198317] pci_bus 0000:08: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.198390] NET: Registered protocol family 2
[ 0.198467] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.198757] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.199285] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.199647] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.199653] TCP reno registered
[ 0.199660] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.199677] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.199872] NET: Registered protocol family 1
[ 0.199904] pci 0000:00:02.0: Boot video device
[ 0.200151] PCI: CLS 64 bytes, default 64
[ 0.200219] Unpacking initramfs...
[ 0.504703] Freeing initrd memory: 11068k freed
[ 0.512202] Simple Boot Flag at 0x36 set to 0x1
[ 0.512502] Scanning for low memory corruption every 60 seconds
[ 0.512702] audit: initializing netlink socket (disabled)
[ 0.512722] type=2000 audit(1300610702.508:1): initialized
[ 0.530604] highmem bounce pool size: 64 pages
[ 0.530615] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.530791] VFS: Disk quotas dquot_6.5.2
[ 0.530825] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.530970] msgmni has been set to 422
[ 0.531160] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.531169] io scheduler noop registered
[ 0.531173] io scheduler deadline registered
[ 0.531192] io scheduler cfq registered (default)
[ 0.532062] vesafb: framebuffer at 0xd0000000, mapped to 0xf7a80000, using 4000k, total 7616k
[ 0.532071] vesafb: mode is 1280x800x16, linelength=2560, pages=2
[ 0.532075] vesafb: scrolling: redraw
[ 0.532080] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.532454] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.532457] bootsplash: silentjpeg size 202733 bytes
[ 0.552947] bootsplash: ...found (1280x800, 106974 bytes, v3).
[ 0.597414] Console: switching to colour frame buffer device 156x46
[ 0.621185] fb0: VESA VGA frame buffer device
[ 0.621369] intel_idle: MWAIT substates: 0x1110
[ 0.621371] intel_idle: does not run on family 6 model 15
[ 0.621396] ERST: Table is not found!
[ 0.621904] Non-volatile memory driver v1.3
[ 0.622052] Linux agpgart interface v0.103
[ 0.622300] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.622582] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.623068] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.629423] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.629743] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.630702] ahci 0000:00:1f.2: version 3.0
[ 0.630720] ahci 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.631059] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 0.631138] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.631418] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 0.631682] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.632371] scsi0 : ahci
[ 0.632594] scsi1 : ahci
[ 0.632769] scsi2 : ahci
[ 0.633086] ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 40
[ 0.633343] ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 40
[ 0.633598] ata3: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504200 irq 40
[ 0.633907] ata_piix 0000:00:1f.1: version 2.13
[ 0.633925] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.634255] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.634760] scsi3 : ata_piix
[ 0.634940] scsi4 : ata_piix
[ 0.642589] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.649464] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.656313] Fixed MDIO Bus: probed
[ 0.663062] PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
[ 0.694068] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.700913] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.707761] mice: PS/2 mouse device common for all mice
[ 0.714851] rtc_cmos 00:07: RTC can wake from S4
[ 0.721667] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.728391] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.735116] cpuidle: using governor ladder
[ 0.741712] cpuidle: using governor menu
[ 0.748418] TCP cubic registered
[ 0.754888] NET: Registered protocol family 10
[ 0.761711] lo: Disabled Privacy Extensions
[ 0.768458] lib80211: common routines for IEEE802.11 drivers
[ 0.774968] lib80211_crypt: registered algorithm 'NULL'
[ 0.774972] Registering the dns_resolver key type
[ 0.781573] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
[ 0.788055] Using IPI No-Shortcut mode
[ 0.794595] registered taskstats version 1
[ 0.801499] Magic number: 3:566:776
[ 0.807905] rtc_cmos 00:07: setting system clock to 2011-03-20 08:45:03 UTC (1300610703)
[ 0.823241] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.920274] ata4.00: ATAPI: MATSHITADVD-RAM UJ-850, RB41, max UDMA/33
[ 0.936164] ata4.00: configured for UDMA/33
[ 1.071762] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.078515] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.085279] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.092161] ata1.00: unexpected _GTF length (8)
[ 1.099128] ata1.00: ATA-8: HITACHI HTS542512K9SA00, BB2ZC3HP, max UDMA/133
[ 1.105836] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.113724] ata1.00: unexpected _GTF length (8)
[ 1.120822] ata1.00: configured for UDMA/133
[ 1.127593] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54251 BB2Z PQ: 0 ANSI: 5
[ 1.134798] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.141723] sd 0:0:0:0: [sda] Write Protect is off
[ 1.148412] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.148570] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.155560] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850 RB41 PQ: 0 ANSI: 5
[ 1.188014] sda: sda1 sda2 sda3
[ 1.195360] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.202350] Freeing unused kernel memory: 448k freed
[ 1.209594] Write protecting the kernel text: 4344k
[ 1.216895] Write protecting the kernel read-only data: 3032k

Da der Output die maximal erlaubte Zeichenanzahl übersteigt habe ich mal nach 1,2 Sek. abgeschnitten.

@ Justaff: Über welchen Port die Tastatur meines Notebooks angeschlossen ist, habe ich mich noch nie gefragt. Ich werde das BIOS auf jeden Fall mal überprüfen.

Schon mal vielen Dank!

lOtz1009 · 20 März 2011

Bitte in Zukunft so große Ausgaben über einen Pastebin posten.

Rainer Juhser · 20 März 2011

mafg schrieb:
Da der Output die maximal erlaubte Zeichenanzahl übersteigt habe ich mal nach 1,2 Sek. abgeschnitten.

Für so etwas gibt es Nopaste-Services, z.B. http://nopaste.info/.

spoensche · 20 März 2011

Code:

[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.040108] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored

Da liegt der Fehler. Die MADT Tabelle gibt Auskunft über den Prozessor.

Der Workaround bzw. die Lösung ist:

Code:

ACPI: Skipping IOAPIC probe due to 'noapic' option.

Die Bootoption "noapic" unterbindet den Zugriff auf die MADT Tabelle. Der Zugriff auf diese Tabelle bringt deinen Rechner zum Stillstand, weil keine MADT Tabelle (siehe Bug) verwendet wird und somit ein Speicherzugriffsfehler entsteht. (In diesem Fall: Zugriff auf eine Speicheradresse, die nicht existiert).

Die Option "noioapic" trägst du entweder beim Systemstart manuell in das Feld Bootoptionen des Bootmenüs oder fügst sie in der /boot/grub/menu.lst in der Zeile mti den Kernelbootparametern ein.
Die zweite Möglichkeit wäre, im BIOS zu überprüfen, ob die Möglichkeit besteht nur die ACPI MADT Tabelle zu verwenden bzw. ein BIOS Update zu machen. Dein BIOS ist immerhin schon 3 Jahre alt.

mafg · 21 März 2011

Der Eintrag von

Code:

noioapic

bei den Bootoptionen hat den Erfolg gebracht.

Vielen Dank!

mafg · 19 Juni 2011

Der Eintrag von

Code:

noapic

und auch diverser anderer Parameter, wie z.B.

Code:

noapic=off

hat leider doch keinen Erfolg gebracht.

Seither habe ich versucht herauszufinden, wie ich meinem Laptop ein BIOS upgrade verpassen kann. Von Lenovo wird nur eine Flashsoftware angeboten, die unter Windows XP oder Vista läuft. Nun ist Linux auf meinem Rechner das einzige installierte Betriebssystem. Auf der Suche nach einer Lösung habe ich nur Howtows gefunden, die mit einem DOS Image arbeiten.

Hat jemand noch einen Tip oder muss ich tatsächlich Windows XP installieren, um das BIOS zu flashen?

Danke und Gruß,
Matthias

spoensche · 19 Juni 2011

Mit dem DOS Image (Free Dos) flashen (Diskette,CD, oder USB). Mit den mtools und/oder dem Dosemu kannst du dir eine Bootdisk erstellen.

mafg · 19 Juni 2011

Ehrlich gesagt, ich traue mich nicht...

Ich habe die Dateien von dem heruntergeladenen BIOS mal extrahiert. Neben dem ROM-Abbild sind da einige DLLs und EXE, die Windows XP oder Vista voraussetzen. Da habe ich Sorge, dass ich mir mein BIOS komplett zerschieße, wenn ich die mit einem DOS-Image kombiniere.

mafg · 21 Juni 2011

So, nun habe ich tatsächlich mal kurz Windows XP installiert und mein BIOS geflasht. Leider ist hat diese Maßnahme keinen Erfolgt gebracht.

Falls noch jemand Vorschläge zur Diagnose oder Behebung des Problems hat, wäre ich sehr dankbar. Ca. 4 Bootversuche/1x starten nerven ganz schön. :/

Gruß,
Matthias

spoensche · 23 Juni 2011

mafg schrieb:
Ich habe die Dateien von dem heruntergeladenen BIOS mal extrahiert. Neben dem ROM-Abbild sind da einige DLLs und EXE, die Windows XP oder Vista voraussetzen. Da habe ich Sorge, dass ich mir mein BIOS komplett zerschieße, wenn ich die mit einem DOS-Image kombiniere.
[/code]

Die exe und ddl Dateien sind das Programm, dass die Bootdisk erstellst und hat nichts mit dem eigentlichen BIOS am Hut.

Code:

fdsisk -l cat /boot/grub/menu.lst

mafg · 23 Juni 2011

Nun habe ich das Problem ja so umgangen, dass ich für den Augenblick Windows in meine swap Partition installiert und das BIOS Update von Windows aus durchgeführt hatte. Danach habe ich die Partition wieder als swap formatiert und es war, als wäre nichts gewesen.
Nun ist das neueste verfügbare BIOS (2009) installiert. Geändert hat es allerdings nichts.

Code:

fdisk -l

Code:

Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000f40cb

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1              63     4209029     2104483+  82  Linux swap / Solaris
/dev/sda2   *     4209030    46154744    20972857+  83  Linux
/dev/sda3        46154745   234436544    94140900   83  Linux

Code:

cat /boot/grub/menu.lst

Code:

# Modified by YaST2. Last modification on Sun May  1 17:53:10 CEST 2011
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader

default 0
timeout 8
##YaST - generic_mbr
gfxmenu (hd0,1)/boot/message
##YaST - activate

###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 11.4 - 2.6.37.6-0.5 (pae)
    root (hd0,1)
    kernel /boot/vmlinuz-2.6.37.6-0.5-pae root=/dev/disk/by-id/ata-HITACHI_HTS542512K9SA00_080118BB0202WBJA7P2C-part2 resume=/dev/disk/by-id/ata-HITACHI_HTS542512K9SA00_080118BB0202WBJA7P2C-part1 splash=silent ipv6.disable=1 showopts vga=0x361
    initrd /boot/initrd-2.6.37.6-0.5-pae

###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 11.4 - 2.6.37.6-0.5 (pae)
    root (hd0,1)
    kernel /boot/vmlinuz-2.6.37.6-0.5-pae root=/dev/disk/by-id/ata-HITACHI_HTS542512K9SA00_080118BB0202WBJA7P2C-part2 showopts ide=nodma apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x361                                                                                                      
    initrd /boot/initrd-2.6.37.6-0.5-pae                                                                                                                                            
                                                                                                                                                                                    
###Don't change this comment - YaST2 identifier: Original name: linux###                                                                                                            
title openSUSE 11.4 - 2.6.37.6-0.5 (default)                                                                                                                                        
    root (hd0,1)
    kernel /boot/vmlinuz-2.6.37.6-0.5-default root=/dev/disk/by-id/ata-HITACHI_HTS542512K9SA00_080118BB0202WBJA7P2C-part2 resume=/dev/disk/by-id/ata-HITACHI_HTS542512K9SA00_080118BB0202WBJA7P2C-part1 splash=silent ipv6.disable=1 showopts vga=0x361
    initrd /boot/initrd-2.6.37.6-0.5-default

###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 11.4 - 2.6.37.6-0.5 (default)
    root (hd0,1)
    kernel /boot/vmlinuz-2.6.37.6-0.5-default root=/dev/disk/by-id/ata-HITACHI_HTS542512K9SA00_080118BB0202WBJA7P2C-part2 showopts ide=nodma apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x361
    initrd /boot/initrd-2.6.37.6-0.5-default

Gruß,
Matthias

RME · 23 Juni 2011

Hallo,

mafg » 20. Mär 2011 schrieb:
Beim booten mit dem Default Kernel bleibt der Bootvorgang sofort hängen...

mafg » 20. Mär 2011 schrieb:
hier ist der Output von

Code:

dmesg

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37.1-1.2-pae (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP 2011-02-21 10:34:10 +0100

Quote 1: Default Kernel

Quote 2: pae Kernel

Ist das Problem sowohl beim Default Kernel wie beim pae Kernel?

Gruss,
Roland

mafg · 23 Juni 2011

Ja, der Hänger tritt bei beiden Kernel auf.

Gruß,
Matthias

spoensche · 24 Juni 2011

Poste mal bitte die Ausgabe von

Code:

hwinfo --gfxcard

.

mafg · 24 Juni 2011

Code:

hwinfo --gfxcard

Code:

09: PCI 02.0: 0300 VGA compatible controller (VGA)              
  [Created at pci.318]
  Unique ID: _Znp.4JC8TVYJvbC
  SysFS ID: /devices/pci0000:00/0000:00:02.0
  SysFS BusID: 0000:00:02.0
  Hardware Class: graphics card
  Model: "Intel 965 GM"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2a02 "965 GM"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x383e 
  Revision: 0x0c
  Driver: "i915"
  Driver Modules: "drm"
  Memory Range: 0xfc000000-0xfc0fffff (rw,non-prefetchable)
  Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
  I/O Ports: 0x1800-0x1807 (rw)
  IRQ: 41 (23570 events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v00008086d00002A02sv000017AAsd0000383Ebc03sc00i00"
  Driver Info #0:
    XFree86 v4 Server Module: intel
  Driver Info #1:
    XFree86 v4 Server Module: intel
    3D Support: yes
    Extensions: dri
  Config Status: cfg=no, avail=yes, need=no, active=unknown

10: PCI 02.1: 0380 Display controller
  [Created at pci.318]
  Unique ID: ruGf.blZmMLrzAD2
  SysFS ID: /devices/pci0000:00/0000:00:02.1
  SysFS BusID: 0000:00:02.1
  Hardware Class: graphics card
  Model: "Intel Mobile GM965/GL960 Integrated Graphics Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2a03 "Mobile GM965/GL960 Integrated Graphics Controller"
  SubVendor: pci 0x17aa "Lenovo"                                                                                                                                                    
  SubDevice: pci 0x383e                                                                                                                                                             
  Revision: 0x0c                                                                                                                                                                    
  Memory Range: 0xfc100000-0xfc1fffff (rw,non-prefetchable)                                                                                                                         
  Module Alias: "pci:v00008086d00002A03sv000017AAsd0000383Ebc03sc80i00"                                                                                                             
  Config Status: cfg=no, avail=yes, need=no, active=unknown                                                                                                                         

Primary display adapter: #9

spoensche · 25 Juni 2011

Boote den Rechner und trage mal im Feld Bootoptionen "nomodeset" ein. Tritt das Problem immer noch auf?

[gelöst] boot failure nach upgrade auf 11.4

mafg

Justaff

spoensche

Justaff

mafg

lOtz1009

Moderator

Rainer Juhser

Moderator

spoensche

mafg

mafg

spoensche

mafg

mafg

spoensche

mafg

RME

mafg

spoensche

mafg

spoensche