• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[Gelöst] Lenovo B560 W-Lan nur mit Yast

M

Mr. U

Ich habe mir vor einigen Tagen ein Lenovo B560 M488PGE mit Win7 gekauft und habe dann auf eine andere Partition OpenSUSE 11.4 installiert.
Es klappte alles bis auf das integrierte W-Lan, jenes habe ich nach einigen Lesen mit Yast zum laufen bekommen. Habe Broadcom von Packman installiert.
Wenn ich bei Yast einstelle das ich über den Networkmanager ins Internet will kommt nachdem Yast alles eingestellt hat die Meldung "Kein Netzwerk" und im Networkmanager Plasmoid kann ich keinen Hacken in Drahtlose Verbindungen aktivieren. Die Option ist zwar anwählbar aber wird direkt wieder abgewählt.

Mit Networkmanager
Code: 
collectNWData.sh V0.6.5.4.3_i (Rev: 1.284, Build: 2011/04/28 22:09:38 UTC)
--- Which type of your network connection should be tested?
--- (2) Wireless connection (WLAN)
--- What's the type of networktopology?
--- (2) WLAN HW router <---> LinuxClient
--- On which host is the script executed?
--- (1) LinuxClient
--- WLAN SSID to connect to: §§§§§§§§1

--- NWEliza is analyzing the system for common network configuration errors ...

!!! CND0120E: Network card eth1 has no IP address
!!! CND0330E: WLAN credential problems exist on interface eth1
!!! CND0400W: Alternate modules brcm80211 detected for interface eth1
!!! CND0240E: knetworkmanager for network configuration enabled but a YAST network card configuration for eth1 exist

--- Go to http://www.linux-tips-and-tricks.de/CND to get more detailed instructions 
--- about the error/warning messages and how to fix the problems on your own.

--- If you are unsuccessful then place the contents of file collectNWData.txt in the net
--- (see http://www.linux-tips-and-tricks.de/CND_UPL for links) 
--- and then paste the nopaste link on your favorite Linux forum.

==================================================================================================================
===== cat /etc/*[-_]release || cat /etc/*[-_]version =============================================================
/etc/SuSE-release
openSUSE 11.4 (x86_64)
VERSION = 11.4
CODENAME = Celadon
===== uname -a ===================================================================================================
Linux schlepplinux13.Tux-Net2 2.6.37.6-0.5-desktop #1 SMP PREEMPT 2011-04-25 21:48:33 +0200 x86_64 x86_64 x86_64 GNU/Linux
===== lspci ======================================================================================================
03:00.0 Ethernet controller [0200]: Atheros Communications AR8131 Gigabit Ethernet [1969:1063] (rev c0)
	Subsystem: Lenovo Device [17aa:3956]
	Kernel driver in use: atl1c
04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
	Subsystem: Broadcom Corporation Device [14e4:0510]
	Kernel driver in use: wl
===== find /lib/modules/`uname -r` -name "*.ko" ==================================================================
Available kernelmodules for VendorId:DeviceId - 14e4:4727
Module: brcm80211
===== lsusb | grep -v "root hub" =================================================================================
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0489:e00d Foxconn / Hon Hai 
Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. 
Bus 001 Device 005: ID 046d:c05a Logitech, Inc. Optical Mouse M90
Bus 001 Device 006: ID 04f2:b1c1 Chicony Electronics Co., Ltd 
===== hwinfo (filtered) ==========================================================================================
22: PCI 300.0: 0200 Ethernet controller
  Model: "Attansic Ethernet controller"
  Vendor: pci 0x1969 "Attansic Technology Corp."
  Device: pci 0x1063 
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3956 
  Driver: "atl1c"
  Driver Modules: "atl1c"
  Device File: eth0
  Link detected: no
    Driver Status: atl1c is active
    Driver Activation Cmd: "modprobe atl1c"
23: PCI 400.0: 0282 WLAN controller
  Model: "Broadcom WLAN controller"
  Vendor: pci 0x14e4 "Broadcom"
  Device: pci 0x4727 
  SubVendor: pci 0x14e4 "Broadcom"
  SubDevice: pci 0x0510 
  Driver: "wl"
  Driver Modules: "wl"
  Device File: eth1
    Driver Status: brcm80211 is not active
    Driver Activation Cmd: "modprobe brcm80211"
    Driver Status: wl is active
    Driver Activation Cmd: "modprobe wl"
===== lsmod (filtered) ===========================================================================================
| ac              | acer_wmi        | af_packet       | arc4            | atl1c            |
| bnep            | btusb           | drm             | drm_kms_helper  | ecb              |
| i2c_algo_bit    | i2c_i801        | i915            | intel_ips       | ip_tables        |
| jbd2            | l2cap           | michael_mic     | mperf           | pci_hotplug      |
| ppdev           | rfcomm          | rfkill          | sco             | sg               |
| shpchp          | sr_mod          | st              | v4l1_compat     | v4l2_compat_ioctl32 |
| wl              | wmi             |
===== ls /lib/firmware/* =========================================================================================
| 2.6.37.6-0.5-desktop    | 3CCFEM556.cis           | 3CXEM556.cis            | amd-ucode                |
| b43                     | b43legacy               | broadcom-wl-firmwares   | COMpad2.cis              |
| COMpad4.cis             | DP83903.cis             | E-CARD.cis              | LA-PCM.cis               |
| microcode.dat           | MT5634ZLX.cis           | NE2K.cis                | PCMLM28.cis              |
| PE-200.cis              | PE520.cis               | RS-COM-2P.cis           | tamarack.cis             |
===== ifconfig (filtered for eth|wlan|ra|ath|dsl) ================================================================
eth0      Link encap:Ethernet  Hardware Adresse ##:##:##:##:##:#1  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:43 
===== iwconfig ===================================================================================================
lo        no wireless extensions.
eth0      no wireless extensions.
eth1      IEEE 802.11  ESSID:""  
          Mode:Managed  Frequency:2.462 GHz  Access Point: Not-Associated   
          Bit Rate:72 Mb/s   Tx-Power:24 dBm   
          Retry min limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=5/5  Signal level=0 dBm  Noise level=-91 dBm
          Rx invalid nwid:0  Rx invalid crypt:8  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0
===== cat /etc/sysconfig/network/ifcfg-[earwd]* | grep -v "=''" ==================================================
--- /etc/sysconfig/network/ifcfg-eth1
BOOTPROTO='dhcp'
NAME='Broadcom WLAN controller'
STARTMODE='auto'
USERCONTROL='yes'
WIRELESS_AP_SCANMODE='1'
WIRELESS_AUTH_MODE='psk'
WIRELESS_BITRATE='auto'
WIRELESS_DEFAULT_KEY='0'
WIRELESS_ESSID='§§§§§§§§1'
WIRELESS_KEY_LENGTH='@@@@@@'
WIRELESS_MODE='Managed'
WIRELESS_POWER='yes'
WIRELESS_WPA_PSK='@@@@@@'
===== iwlist scanning ============================================================================================
                    ESSID:"§§§§§§§§1"
                    Quality:4/5  Signal level:-65 dBm  Noise level:-92 dBm
                    IE: WPA Version 1
                    Encryption key:on
===== ndiswrapper -l =============================================================================================
No ndiswrapper module loaded
===== Active processes ===========================================================================================
wpa_supplicant:YES knetworkmanager:NO nm-applet:NO
===== Active WPA processes =======================================================================================
/usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -u -f /var/log/wpa_supplicant.log
===== ===== egrep -i "persistent|networkmanager" /etc/sysconfig/network/config | grep -v "^#|^$" =================
NETWORKMANAGER="yes"
===== dhcpcd-test ================================================================================================
eth1: No DHCP server detected info, eth1: hardware address = ##:##:##:##:##:#2
info, eth1: broadcasting for a lease
debug, eth1: sending DHCP_DISCOVER with xid 0x7971447b
debug, eth1: waiting for 3 seconds
info, eth1: exiting
===== ping tests =================================================================================================
connect: Network is unreachable
Ping of 195.135.220.3 failed
ping: unknown host www.suse.de
Ping of www.suse.de failed
===== cat /etc/resolv | grep -i "nameserver" =====================================================================
===== cat /etc/hosts =============================================================================================
127.0.0.1       localhost
===== route -n | egrep "(eth|ath|ra|wlan|dsl)" ===================================================================
===== Actual date for bias of following greps ====================================================================
22:24:35 2011-06-16
===== grep -i radio /var/log/messages* | tail -n 5 ===============================================================
Jun 16 13:28:29 schlepplinux13 NetworkManager[1320]: <info> found WiFi radio killswitch rfkill0 (at /sys/devices/platform/acer-wmi/rfkill/rfkill0) (driver acer-wmi)
Jun 16 13:28:29 schlepplinux13 NetworkManager[1320]: <info> WiFi disabled by radio killswitch; enabled by state file
Jun 16 13:28:29 schlepplinux13 NetworkManager[1320]: <info> WWAN enabled by radio killswitch; enabled by state file
Jun 16 13:28:29 schlepplinux13 NetworkManager[1320]: <info> WiMAX enabled by radio killswitch; enabled by state file
Jun 16 14:53:04 schlepplinux13 NetworkManager[1263]: <info> found WiFi radio killswitch rfkill0 (at /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0f/PNP0C09:00/VPC2004:00/rfkill/rfkill0) (driver ideapad_acpi)
Jun 16 14:53:04 schlepplinux13 NetworkManager[1263]: <info> found WiFi radio killswitch rfkill2 (at /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0f/PNP0C09:00/VPC2004:00/rfkill/rfkill2) (driver ideapad_acpi)
Jun 16 14:53:04 schlepplinux13 NetworkManager[1263]: <info> found WiFi radio killswitch rfkill3 (at /sys/devices/platform/acer-wmi/rfkill/rfkill3) (driver acer-wmi)
Jun 16 14:53:04 schlepplinux13 NetworkManager[1263]: <info> WiFi disabled by radio killswitch; enabled by state file
Jun 16 14:53:04 schlepplinux13 NetworkManager[1263]: <info> WWAN enabled by radio killswitch; enabled by state file
Jun 16 14:53:04 schlepplinux13 NetworkManager[1263]: <info> WiMAX enabled by radio killswitch; enabled by state file
===== dmesg | grep -i radio | tail -n 5 ==========================================================================
===== tail -n 300 /var/log/messages* | /usr/bin/grep -i firmware | tail -n 10 ====================================
===== egrep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net* ==============
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#2", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
===== egrep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*|egrep -v -i '#|backlist' ================
==================================================================================================================
*** NWElizaStates V0.6.5.4.3_i
IF:eth0 IM:1 IF:eth1 IM:2 DI:2 AP:1 FALON:1 NIC:1 cNiC:2:1 NI:2 cNI:2 NIW:eth1-2 NIWLA:0 CM:2 IP6:0 KM:1 WLW:0 RTDT:SuSE


Mit Yast

Code: 
collectNWData.sh V0.6.5.4.3_i (Rev: 1.284, Build: 2011/04/28 22:09:38 UTC)
--- Which type of your network connection should be tested?
--- (2) Wireless connection (WLAN)
--- What's the type of networktopology?
--- (2) WLAN HW router <---> LinuxClient
--- On which host is the script executed?
--- (1) LinuxClient
--- WLAN SSID to connect to: §§§§§§§§1

--- NWEliza is analyzing the system for common network configuration errors ...

!!! CND0310W: Classic network configuration with ifup was detected. Configuration with knetworkmanager is much easier

--- Go to http://www.linux-tips-and-tricks.de/CND to get more detailed instructions 
--- about the error/warning messages and how to fix the problems on your own.

--- If you are unsuccessful then place the contents of file collectNWData.txt in the net
--- (see http://www.linux-tips-and-tricks.de/CND_UPL for links) 
--- and then paste the nopaste link on your favorite Linux forum.

==================================================================================================================
===== cat /etc/*[-_]release || cat /etc/*[-_]version =============================================================
/etc/SuSE-release
openSUSE 11.4 (x86_64)
VERSION = 11.4
CODENAME = Celadon
===== uname -a ===================================================================================================
Linux schlepplinux13.Tux-Net2 2.6.37.6-0.5-desktop #1 SMP PREEMPT 2011-04-25 21:48:33 +0200 x86_64 x86_64 x86_64 GNU/Linux
===== lspci ======================================================================================================
03:00.0 Ethernet controller [0200]: Atheros Communications AR8131 Gigabit Ethernet [1969:1063] (rev c0)
	Subsystem: Lenovo Device [17aa:3956]
	Kernel driver in use: atl1c
04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
	Subsystem: Broadcom Corporation Device [14e4:0510]
	Kernel driver in use: wl
===== find /lib/modules/`uname -r` -name "*.ko" ==================================================================
Available kernelmodules for VendorId:DeviceId - 14e4:4727
Module: brcm80211
===== lsusb | grep -v "root hub" =================================================================================
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0489:e00d Foxconn / Hon Hai 
Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. 
Bus 001 Device 005: ID 04f2:b1c1 Chicony Electronics Co., Ltd 
===== hwinfo (filtered) ==========================================================================================
22: PCI 300.0: 0200 Ethernet controller
  Model: "Attansic Ethernet controller"
  Vendor: pci 0x1969 "Attansic Technology Corp."
  Device: pci 0x1063 
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3956 
  Driver: "atl1c"
  Driver Modules: "atl1c"
  Device File: eth0
  Link detected: no
    Driver Status: atl1c is active
    Driver Activation Cmd: "modprobe atl1c"
23: PCI 400.0: 0282 WLAN controller
  Model: "Broadcom WLAN controller"
  Vendor: pci 0x14e4 "Broadcom"
  Device: pci 0x4727 
  SubVendor: pci 0x14e4 "Broadcom"
  SubDevice: pci 0x0510 
  Driver: "wl"
  Driver Modules: "wl"
  Device File: eth1
  Link detected: yes
    Driver Status: brcm80211 is not active
    Driver Activation Cmd: "modprobe brcm80211"
    Driver Status: wl is active
    Driver Activation Cmd: "modprobe wl"
===== lsmod (filtered) ===========================================================================================
| ac              | acer_wmi        | af_packet       | arc4            | atl1c            |
| bnep            | btusb           | drm             | drm_kms_helper  | ecb              |
| i2c_algo_bit    | i2c_i801        | i915            | intel_ips       | jbd2             |
| l2cap           | michael_mic     | mperf           | pci_hotplug     | rfcomm           |
| rfkill          | sco             | sg              | shpchp          | sr_mod           |
| v4l1_compat     | v4l2_compat_ioctl32| wl              | wmi             |
===== ls /lib/firmware/* =========================================================================================
| 2.6.37.6-0.5-desktop    | 3CCFEM556.cis           | 3CXEM556.cis            | amd-ucode                |
| b43                     | b43legacy               | broadcom-wl-firmwares   | COMpad2.cis              |
| COMpad4.cis             | DP83903.cis             | E-CARD.cis              | LA-PCM.cis               |
| microcode.dat           | MT5634ZLX.cis           | NE2K.cis                | PCMLM28.cis              |
| PE-200.cis              | PE520.cis               | RS-COM-2P.cis           | tamarack.cis             |
===== ifconfig (filtered for eth|wlan|ra|ath|dsl) ================================================================
eth1      Link encap:Ethernet  Hardware Adresse ##:##:##:##:##:#1  
          inet Adresse:192.168.2.107  Bcast:192.168.2.255  Maske:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:188 errors:0 dropped:0 overruns:0 frame:438
          TX packets:148 errors:2 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:14896 (14.5 Kb)  TX bytes:19697 (19.2 Kb)
          Interrupt:17 
===== iwconfig ===================================================================================================
lo        no wireless extensions.
eth0      no wireless extensions.
eth1      IEEE 802.11  ESSID:"§§§§§§§§1"  
          Mode:Managed  Frequency:2.462 GHz  Access Point: ##:##:##:##:##:#2   
          Bit Rate=54 Mb/s   Tx-Power:24 dBm   
          Retry min limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=4/5  Signal level=-61 dBm  Noise level=-96 dBm
          Rx invalid nwid:0  Rx invalid crypt:3  Rx invalid frag:0
          Tx excessive retries:1  Invalid misc:0   Missed beacon:0
===== cat /etc/sysconfig/network/ifcfg-[earwd]* | grep -v "=''" ==================================================
--- /etc/sysconfig/network/ifcfg-eth1
BOOTPROTO='dhcp'
NAME='Broadcom WLAN controller'
STARTMODE='auto'
USERCONTROL='yes'
WIRELESS_AP_SCANMODE='1'
WIRELESS_AUTH_MODE='psk'
WIRELESS_BITRATE='auto'
WIRELESS_DEFAULT_KEY='0'
WIRELESS_ESSID='§§§§§§§§1'
WIRELESS_KEY_LENGTH='@@@@@@'
WIRELESS_MODE='Managed'
WIRELESS_POWER='yes'
WIRELESS_WPA_PSK='@@@@@@'
===== iwlist scanning ============================================================================================
                    ESSID:"§§§§§§§§1"
                    Quality:4/5  Signal level:-62 dBm  Noise level:-98 dBm
                    IE: WPA Version 1
                    Encryption key:on
===== ndiswrapper -l =============================================================================================
No ndiswrapper module loaded
===== Active processes ===========================================================================================
wpa_supplicant:YES knetworkmanager:NO nm-applet:NO
===== Active WPA processes =======================================================================================
/usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -u -f /var/log/wpa_supplicant.log
wpa_supplicant -ieth1 -c/var/run/wpa_supplicant-eth1.conf -Dwext -P/var/run/wpa_supplicant/eth1.pid -B
===== ===== egrep -i "persistent|networkmanager" /etc/sysconfig/network/config | grep -v "^#|^$" =================
NETWORKMANAGER="no"
===== dhcpcd-test ================================================================================================
eth1: DHCP server available
===== ping tests =================================================================================================
Ping of 195.135.220.3 OK
Ping of www.suse.de OK
===== cat /etc/resolv | grep -i "nameserver" =====================================================================
nameserver 192.168.2.1
===== cat /etc/hosts =============================================================================================
127.0.0.1       localhost
===== route -n | egrep "(eth|ath|ra|wlan|dsl)" ===================================================================
192.168.2.0     0.0.0.0         255.255.255.0   U     0      0        0 eth1
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 eth1
0.0.0.0         192.168.2.1     0.0.0.0         UG    0      0        0 eth1
===== Actual date for bias of following greps ====================================================================
15:24:42 2011-06-17
===== grep -i radio /var/log/messages* | tail -n 5 ===============================================================
Jun 16 13:28:29 schlepplinux13 NetworkManager[1320]: <info> found WiFi radio killswitch rfkill0 (at /sys/devices/platform/acer-wmi/rfkill/rfkill0) (driver acer-wmi)
Jun 16 13:28:29 schlepplinux13 NetworkManager[1320]: <info> WiFi disabled by radio killswitch; enabled by state file
Jun 16 13:28:29 schlepplinux13 NetworkManager[1320]: <info> WWAN enabled by radio killswitch; enabled by state file
Jun 16 13:28:29 schlepplinux13 NetworkManager[1320]: <info> WiMAX enabled by radio killswitch; enabled by state file
Jun 16 14:53:04 schlepplinux13 NetworkManager[1263]: <info> found WiFi radio killswitch rfkill0 (at /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0f/PNP0C09:00/VPC2004:00/rfkill/rfkill0) (driver ideapad_acpi)
Jun 16 14:53:04 schlepplinux13 NetworkManager[1263]: <info> found WiFi radio killswitch rfkill2 (at /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0f/PNP0C09:00/VPC2004:00/rfkill/rfkill2) (driver ideapad_acpi)
Jun 16 14:53:04 schlepplinux13 NetworkManager[1263]: <info> found WiFi radio killswitch rfkill3 (at /sys/devices/platform/acer-wmi/rfkill/rfkill3) (driver acer-wmi)
Jun 16 14:53:04 schlepplinux13 NetworkManager[1263]: <info> WiFi disabled by radio killswitch; enabled by state file
Jun 16 14:53:04 schlepplinux13 NetworkManager[1263]: <info> WWAN enabled by radio killswitch; enabled by state file
Jun 16 14:53:04 schlepplinux13 NetworkManager[1263]: <info> WiMAX enabled by radio killswitch; enabled by state file
===== dmesg | grep -i radio | tail -n 5 ==========================================================================
===== tail -n 300 /var/log/messages* | /usr/bin/grep -i firmware | tail -n 10 ====================================
===== egrep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net* ==============
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#3", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
===== egrep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*|egrep -v -i '#|backlist' ================
==================================================================================================================
*** NWElizaStates V0.6.5.4.3_i
IF:eth1 IM:2 DI:1 AP:1 FALON:1 NIC:0 cNiC:1:0 NI:0 cNI:0 PNG:0 DNS:0 MTU:1 NISS:0 IP6:0 KM:0 WLW:0 RTDT:SuSE
 
tomm.fa

tomm.fa

.Linux Club Aushilfsadministrator
Teammitglied
Klick!
Du kannst aber auch broadcom-wl wieder deinstallieren und dafür das Paket kernel-firmware installieren. Die Karte wird von brcm80211 unterstützt.
 
OP
M

Mr. U

Ich habe die einstellungen wie beschrieben gelöscht, und das Paket kernel-firmware installiert. Das Problem besteht weiterhin, im Plasmoid steht unter Schnittstellen WLAN-Schnittstelle : Unavailable.
Und der haken bei Drahtlose Verbindungen aktivieren verschwindet auch direkt wieder.
 
R

rolloH

Hallo Mr. U

probiere mal folgendes. Terminal öffnen, su - eintippen und Root Passwort eingeben, danach rfkill unblock all eingeben !

Schönen Gruß

rolloh
 
OP
M

Mr. U

Hat leider auch nicht geholfen. Das Programm war nicht installiert. Nach der Instalation kam keine meldung vom Programm und die WLAN-Schnittstelle wird immernoch mit Unavailable angezeigt.
 
OP
M

Mr. U

Mich wundert vor allem, das Wlan mit Yast2 und der alten methode klappt aber nicht mit dem Network manager. Die Treiber scheinen ja installiert zu sein.
 
G

Grothesk

Vermutlich deswegen:
Code: 
!!! CND0240E: knetworkmanager for network configuration enabled but a YAST network card configuration for eth1 exist
 
tomm.fa

tomm.fa

.Linux Club Aushilfsadministrator
Teammitglied
Nachdem hier einiges geändert wurde, wäre eine neue Ausgabe vom Script sinnvoll.
 
A

Anonymous

Gast
Ich habe denselben Laptop. Du musst noch das Modul acer-wmi blacklisten. Ansonsten geht die Einrichtung wie hier beschrieben. Das Paket kernel-firmware installieren und fertig. Dass du dich für die ifup- oder Network-Manager-Methode entscheiden musst, wurde ja schon gesagt.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben