• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[gelöst] SSH - X11 Forwarding funktioniert nicht

M

Moorteufel

Moin!

Ich schaffe es einfach nicht ein grafisches Programm (z.B. xclock), über meine SSH-Verbindung auf dem SSH-Server vom Client aus zu starten.
Wenn Ich "ssh -X moorteufel@zuhause xclock" in der Konsole aufrufe bekomme ich folgende Meldung:

Code: 
:~> ssh -X moorteufel@zuhause xclock
Enter passphrase for key '/home/moorteufel/.ssh/id_rsa': 
X11 connection rejected because of wrong authentication.
Error: Can't open display: localhost:10.0

folgende Sachen habe ich geprüft:

  • Genügend Speicher sollte endlich vorhanden sein:
    Code: 
    :~> df -H
Dateisystem    Größe Benutzt Verf. Verw% Eingehängt auf
/dev/sda1        32G     23G  7,1G   77% /
devtmpfs        1,1G     33k  1,1G    1% /dev
tmpfs           1,1G    2,7M  1,1G    1% /dev/shm
tmpfs           1,1G    8,2M  1,1G    1% /run
tmpfs           1,1G       0  1,1G    0% /sys/fs/cgroup
tmpfs           1,1G    8,2M  1,1G    1% /var/run
tmpfs           1,1G    8,2M  1,1G    1% /var/lock
/dev/sda6       425G    346G   57G   86% /home
  • Die .Xauthority gehört mir:
    Code: 
    :~> ls -l ~/.Xauthority
-rw------- 1 moorteufel users 163 15. Aug 18:05 /home/moorteufel/.Xauthority
  • X11 Forwarding ist im SSHD eingeschaltet:
    Code: 
    :~> sudo grep X11Forwarding /etc/ssh/sshd_config
root's password:
X11Forwarding yes
#       X11Forwarding no
  • Auch das X11-Forwarding beim Client ist aktiviert (ssh_config):
    Code: 
    #	$OpenBSD: ssh_config,v 1.26 2010/01/11 01:39:46 dtucker Exp $

# This is the ssh client system-wide configuration file.  See
# ssh_config(5) for more information.  This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.

# Configuration data is parsed as follows:
#  1. command line options
#  2. user-specific file
#  3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.

# Site-wide defaults for some commonly used options.  For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.

Host *
#   ForwardAgent no
ForwardX11 yes

# If you do not trust your remote host (or its administrator), you
# should not forward X11 connections to your local X11-display for
# security reasons: Someone stealing the authentification data on the
# remote side (the "spoofed" X-server by the remote sshd) can read your
# keystrokes as you type, just like any other X11 client could do.
# Set this to "no" here for global effect or in your own ~/.ssh/config
# file if you want to have the remote X11 authentification data to
# expire after two minutes after remote login.
ForwardX11Trusted yes

#   RhostsRSAAuthentication no
#   RSAAuthentication yes
#   PasswordAuthentication yes
#   HostbasedAuthentication no
#   GSSAPIAuthentication no
#   GSSAPIDelegateCredentials no
#   BatchMode no
#   CheckHostIP yes
#   AddressFamily any
#   ConnectTimeout 0
#   StrictHostKeyChecking ask
#   IdentityFile ~/.ssh/identity
#   IdentityFile ~/.ssh/id_rsa
#   IdentityFile ~/.ssh/id_dsa
#   Port 22
    Protocol 2
#   Cipher 3des
#   Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
#   MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160
#   EscapeChar ~
#   Tunnel no
#   TunnelDevice any:any
#   PermitLocalCommand no
#   GSSAPIAuthentication no
#   GSSAPIDelegateCredentials no

# Set this to 'yes' to enable support for the deprecated 'gssapi' authentication
# mechanism to OpenSSH 3.8p1. The newer 'gssapi-with-mic' mechanism is included
# in this release. The use of 'gssapi' is deprecated due to the presence of
# potential man-in-the-middle attacks, which 'gssapi-with-mic' is not susceptible to.
#   GSSAPIEnableMITMAttack no

# This enables sending locale enviroment variables LC_* LANG, see ssh_config(5).
SendEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
SendEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
SendEnv LC_IDENTIFICATION LC_ALL

# This will print the fingerprint of the host key in "visual" form
# this should make it easier to also recognize bad things
VisualHostKey no

# This will hash new host keys and make them so unusable for malicious
# people or software trying to use known_hosts to find further hops.
HashKnownHosts yes

#   ProxyCommand ssh -q -W %h:%p gateway.example.com

Ich weiß ehrlich gesagt auch nicht, ob ich alles in der sshd_config richtig eingestellt habe.
Darum hier nochmal der Code:
Code: 
#	$OpenBSD: sshd_config,v 1.89 2013/02/06 00:20:42 dtucker Exp $

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options override the
# default value.

#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::

# The default requires explicit activation of protocol 1
#Protocol 2

# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key

# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024

# Logging
# obsoletes QuietMode and FascistLogging
SyslogFacility AUTH
LogLevel INFO

# Authentication:

#LoginGraceTime 2m
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10

#RSAAuthentication yes
#PubkeyAuthentication yes

# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile	.ssh/authorized_keys

#AuthorizedPrincipalsFile none

#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication no
#PermitEmptyPasswords no

# Change to no to disable s/key passwords
ChallengeResponseAuthentication no

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes

# Set this to 'yes' to enable support for the deprecated 'gssapi' authentication
# mechanism to OpenSSH 3.8p1. The newer 'gssapi-with-mic' mechanism is included
# in this release. The use of 'gssapi' is deprecated due to the presence of
# potential man-in-the-middle attacks, which 'gssapi-with-mic' is not susceptible to.
#GSSAPIEnableMITMAttack no

# Set this to 'yes' to enable PAM authentication, account processing, 
# and session processing. If this is enabled, PAM authentication will 
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication.  Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes

#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
UsePrivilegeSeparation sandbox		# Default for new installations.
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none

# no default banner path
#Banner none

# override default of no subsystems
Subsystem	sftp	/usr/lib/ssh/sftp-server

# This enables accepting locale enviroment variables LC_* LANG, see sshd_config(5).
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL

# Example of overriding settings on a per-user basis
#Match User anoncvs
#	X11Forwarding no
#	AllowTcpForwarding no
#	ForceCommand cvs server

Ich bin mit meinem Latein am Ende, zumal die "einfache" SSH-Verbindung funktioniert.
Hat da jemand noch eine Idee?
 
OP
M

Moorteufel

OK, war zu faul die Kommentare zu lesen. :eek:ps:

Lag an der /etc/ssh/sshrc. Nachdem ich die Datei gelöscht habe ging's.
Endlich wollte ich das Script dazu benutzen um eine eMail zusenden, wenn sich jemand über SSH eingeloggt hat.
Gibt es da eine andere sichere Lösung?
 
OP
M

Moorteufel

So, hab die Lösung gefunden.

Code: 
:~> cat /etc/ssh/sshrc
#!/bin/bash
#Cookie für xauth setzen 
if read proto cookie && [ -n "$DISPLAY" ]; then
        if [ `echo $DISPLAY | cut -c1-10` = 'localhost:' ]; then
                # X11UseLocalhost=yes
                echo add unix:`echo $DISPLAY |
                    cut -c11-` $proto $cookie
        else
                # X11UseLocalhost=no
                echo add $DISPLAY $proto $cookie
        fi | xauth -q -
fi
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben