Beim Booten Suse 11.3/11.4 bekomme ich die Fehlermeldung: „hub 1-8:1.0: hub_port_status failed (err = -71)“ Hier ein Auszug aus der Datei boot.msg
Erst wenn Suse schon läuft bekomme ich in einer offenen Shell mit dem Kommando tail -f /var/log/messages die Ausgabe:
Die Schnittstelle wlan0 (Ralink Chip => dVendor=148f, idProduct=2570) wird nicht gleich beim Booten geladen. Nach dem Booten dauert es ca. 2 Minuten bis tail -f /var/log/messages die Aktionen (siehe oben Ausgabe tail -f /var/log/messages) liefert. Nach den Aktionen wird erst wlan0 geladen.
Ich möchte wissen was bedeutet die Fehlermeldung.
Ist das ein Hardware Fehler?
Code:
<6>[ 3.385021] usb 1-8: new high speed USB device using ehci_hcd and address 4
<7>[ 3.504592] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
<7>[ 3.504600] PM: Basic memory bitmaps created
<7>[ 3.513520] PM: Basic memory bitmaps freed
<6>[ 3.518828] usb 1-8: New USB device found, idVendor=05e3, idProduct=0605
<6>[ 3.518833] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
<6>[ 3.518838] usb 1-8: Product: USB2.0 Hub
<6>[ 3.519486] hub 1-8:1.0: USB hub found
<6>[ 3.519868] hub 1-8:1.0: 4 ports detected
<6>[ 3.531123] PM: Starting manual resume from disk
<7>[ 3.531127] PM: Resume from partition 8:7
<7>[ 3.531129] PM: Checking hibernation image.
<7>[ 3.531311] PM: Error -22 checking image file
<7>[ 3.531314] PM: Resume from disk failed.
<6>[ 3.654565] EXT4-fs (sda9): mounted filesystem with ordered data mode
<6>[ 3.760022] usb 2-1: new low speed USB device using uhci_hcd and address 2
<6>[ 3.937195] usb 2-1: New USB device found, idVendor=046d, idProduct=c517
<6>[ 3.937200] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[ 3.937203] usb 2-1: Product: USB Receiver
<6>[ 3.937206] usb 2-1: Manufacturer: Logitech
<3>[ 3.959929] hub 1-8:1.0: hub_port_status failed (err = -71)
<3>[ 3.964177] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 3.968426] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 3.972674] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 3.976925] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 3.977195] hub 1-8:1.0: Cannot enable port 1. Maybe the USB cable is bad?
<3>[ 3.981550] hub 1-8:1.0: cannot disable port 1 (err = -71)
<3>[ 3.985799] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 3.990049] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 3.994298] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 3.998548] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 4.002798] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 4.003069] hub 1-8:1.0: Cannot enable port 1. Maybe the USB cable is bad?
<3>[ 4.007422] hub 1-8:1.0: cannot disable port 1 (err = -71)
<3>[ 4.011673] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 4.015922] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 4.020174] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 4.024422] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 4.028671] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 4.028941] hub 1-8:1.0: Cannot enable port 1. Maybe the USB cable is bad?
<3>[ 4.033298] hub 1-8:1.0: cannot disable port 1 (err = -71)
<3>[ 4.037545] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 4.041794] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 4.046045] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 4.050296] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 4.054544] hub 1-8:1.0: cannot reset port 1 (err = -71)
<3>[ 4.054814] hub 1-8:1.0: Cannot enable port 1. Maybe the USB cable is bad?
<3>[ 4.059171] hub 1-8:1.0: cannot disable port 1 (err = -71)
<3>[ 4.059452] hub 1-8:1.0: unable to enumerate USB device on port 1
<3>[ 4.071423] hub 1-8:1.0: cannot disable port 1 (err = -71)
<3>[ 4.083295] hub 1-8:1.0: hub_port_status failed (err = -71)
<3>[ 4.095170] hub 1-8:1.0: hub_port_status failed (err = -71)
<3>[ 4.106796] hub 1-8:1.0: hub_port_status failed (err = -71)
<7>[ 5.446947] preloadtrace: systemtap: 1.1/0.147, base: f88c2000, memory: 24data/38text/12ctx/13net/268alloc kb, probes: 34
<6>[ 6.915637] udev: starting version 157
<6>[ 7.119771] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Code:
Nov 27 12:42:48 linux-u0fs kernel: [ 249.856016] usb 1-8: reset high speed USB device using ehci_hcd and address 4
Nov 27 12:42:49 linux-u0fs kernel: [ 250.268339] usb 1-8.1: new high speed USB device using ehci_hcd and address 9
Nov 27 12:42:49 linux-u0fs kernel: [ 250.495195] usb 1-8.1: New USB device found, idVendor=148f, idProduct=2570
Nov 27 12:42:49 linux-u0fs kernel: [ 250.495200] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 27 12:42:49 linux-u0fs kernel: [ 250.495204] usb 1-8.1: Product: 802.11g WLAN
Nov 27 12:42:49 linux-u0fs kernel: [ 250.495206] usb 1-8.1: Manufacturer: Ralink
Nov 27 12:42:49 linux-u0fs kernel: [ 250.605836] phy1: Selected rate control algorithm 'minstrel'
Nov 27 12:42:49 linux-u0fs kernel: [ 250.606824] Registered led device: rt2500usb-phy1::radio
Nov 27 12:42:49 linux-u0fs kernel: [ 250.606861] Registered led device: rt2500usb-phy1::quality
Nov 27 12:42:49 linux-u0fs kernel: [ 250.681446] usb 1-8.2: new full speed USB device using ehci_hcd and address 10
Nov 27 12:42:49 linux-u0fs ifup: Service network not started and mode 'auto' -> skipping
Nov 27 12:42:49 linux-u0fs kernel: [ 250.774173] usb 1-8.2: New USB device found, idVendor=0db0, idProduct=6855
Nov 27 12:42:49 linux-u0fs kernel: [ 250.774178] usb 1-8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 27 12:42:49 linux-u0fs kernel: [ 250.774182] usb 1-8.2: Product: SiW
Nov 27 12:42:49 linux-u0fs kernel: [ 250.774184] usb 1-8.2: Manufacturer: SiW
Nov 27 12:42:49 linux-u0fs kernel: [ 250.774186] usb 1-8.2: SerialNumber: E93056091100
Nov 27 12:42:49 linux-u0fs kernel: [ 250.819289] Bluetooth: Core ver 2.15
Nov 27 12:42:49 linux-u0fs kernel: [ 250.819947] NET: Registered protocol family 31
Nov 27 12:42:49 linux-u0fs kernel: [ 250.819952] Bluetooth: HCI device and connection manager initialized
Nov 27 12:42:49 linux-u0fs kernel: [ 250.819957] Bluetooth: HCI socket layer initialized
Nov 27 12:42:49 linux-u0fs kernel: [ 250.838004] Bluetooth: Generic Bluetooth USB driver ver 0.6
Nov 27 12:42:49 linux-u0fs kernel: [ 250.838494] usbcore: registered new interface driver btusb
Nov 27 12:42:49 linux-u0fs kernel: [ 250.844296] usb 1-8.3: new low speed USB device using ehci_hcd and address 11
Nov 27 12:42:49 linux-u0fs kernel: [ 250.885602] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 27 12:42:49 linux-u0fs kernel: [ 250.943023] usb 1-8.3: New USB device found, idVendor=0bc7, idProduct=0006
Nov 27 12:42:49 linux-u0fs kernel: [ 250.943029] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 27 12:42:49 linux-u0fs kernel: [ 250.943034] usb 1-8.3: Product: USB Receiver
Nov 27 12:42:49 linux-u0fs kernel: [ 250.943037] usb 1-8.3: Manufacturer: X10 Wireless Technology Inc
Nov 27 12:42:49 linux-u0fs bluetoothd[5662]: Bluetooth daemon 4.64
Nov 27 12:42:50 linux-u0fs bluetoothd[5669]: Starting SDP server
Nov 27 12:42:50 linux-u0fs kernel: [ 251.014538] Bluetooth: L2CAP ver 2.14
Nov 27 12:42:50 linux-u0fs kernel: [ 251.014543] Bluetooth: L2CAP socket layer initialized
Nov 27 12:42:50 linux-u0fs kernel: [ 251.014755] input: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.3/input/input6
Nov 27 12:42:50 linux-u0fs kernel: [ 251.014984] usbcore: registered new interface driver ati_remote
Nov 27 12:42:50 linux-u0fs kernel: [ 251.014989] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
Nov 27 12:42:50 linux-u0fs kernel: [ 251.016580] usb 1-8.4: new high speed USB device using ehci_hcd and address 12
Nov 27 12:42:50 linux-u0fs kernel: [ 251.020908] usb 1-8.3: Weird data, len=1 ff 00 00 00 00 00 ...
Nov 27 12:42:50 linux-u0fs bluetoothd[5669]: Starting experimental netlink support
Nov 27 12:42:50 linux-u0fs bluetoothd[5669]: Failed to find Bluetooth netlink family
Nov 27 12:42:50 linux-u0fs bluetoothd[5669]: Failed to init netlink plugin
Nov 27 12:42:50 linux-u0fs bluetoothd[5669]: Parsing /etc/bluetooth/network.conf failed: No such file or directory
Nov 27 12:42:50 linux-u0fs kernel: [ 251.071197] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Nov 27 12:42:50 linux-u0fs kernel: [ 251.071202] Bluetooth: BNEP filters: protocol multicast
Nov 27 12:42:50 linux-u0fs kernel: [ 251.103953] lirc_dev: IR Remote Control driver registered, major 61
Nov 27 12:42:50 linux-u0fs kernel: [ 251.110524] usb 1-8.4: New USB device found, idVendor=0db0, idProduct=4023
Nov 27 12:42:50 linux-u0fs kernel: [ 251.110530] usb 1-8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 27 12:42:50 linux-u0fs kernel: [ 251.110533] usb 1-8.4: Product: Card Reader V0.1C
Nov 27 12:42:50 linux-u0fs kernel: [ 251.110536] usb 1-8.4: Manufacturer: Generic
Nov 27 12:42:50 linux-u0fs kernel: [ 251.110538] usb 1-8.4: SerialNumber: AAAA12345678
Nov 27 12:42:50 linux-u0fs avahi-daemon[1946]: Withdrawing address record for 192.168.2.100 on wlan1.
Nov 27 12:42:50 linux-u0fs avahi-daemon[1946]: Leaving mDNS multicast group on interface wlan1.IPv4 with address 192.168.2.100.
Nov 27 12:42:50 linux-u0fs avahi-daemon[1946]: Interface wlan1.IPv4 no longer relevant for mDNS.
Nov 27 12:42:50 linux-u0fs kernel: [ 251.160554] Initializing USB Mass Storage driver...
Nov 27 12:42:50 linux-u0fs kernel: [ 251.164768] scsi6 : usb-storage 1-8.4:1.0
Nov 27 12:42:50 linux-u0fs kernel: [ 251.165066] usbcore: registered new interface driver usb-storage
Nov 27 12:42:50 linux-u0fs kernel: [ 251.165071] USB Mass Storage support registered.
Nov 27 12:42:50 linux-u0fs kernel: [ 251.174358] wlan1: deauthenticating from 00:12:bf:e5:73:fc by local choice (reason=3)
Nov 27 12:42:50 linux-u0fs kernel: [ 251.195172] Bridge firewalling registered
Nov 27 12:42:50 linux-u0fs kernel: [ 251.199499]
Nov 27 12:42:50 linux-u0fs kernel: [ 251.199502] lirc_atiusb: USB remote driver for LIRC $Revision: 1.86 $
Nov 27 12:42:50 linux-u0fs kernel: [ 251.199506] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
Nov 27 12:42:50 linux-u0fs kernel: [ 251.199608] usbcore: registered new interface driver lirc_atiusb
Nov 27 12:42:50 linux-u0fs kernel: [ 251.232152] cfg80211: Calling CRDA to update world regulatory domain
Nov 27 12:42:50 linux-u0fs bluetoothd[5669]: bridge pan0 created
Nov 27 12:42:50 linux-u0fs bluetoothd[5669]: Parsing /etc/bluetooth/input.conf failed: No such file or directory
Nov 27 12:42:50 linux-u0fs bluetoothd[5669]: Parsing /etc/bluetooth/audio.conf failed: No such file or directory
Nov 27 12:42:50 linux-u0fs kernel: [ 251.250459] cfg80211: World regulatory domain updated:
Nov 27 12:42:50 linux-u0fs kernel: [ 251.250465] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov 27 12:42:50 linux-u0fs kernel: [ 251.250470] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov 27 12:42:50 linux-u0fs kernel: [ 251.250475] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov 27 12:42:50 linux-u0fs kernel: [ 251.250480] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov 27 12:42:50 linux-u0fs kernel: [ 251.250484] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov 27 12:42:50 linux-u0fs kernel: [ 251.250489] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov 27 12:42:50 linux-u0fs kernel: [ 251.279563] Bluetooth: SCO (Voice Link) ver 0.6
Nov 27 12:42:50 linux-u0fs kernel: [ 251.279568] Bluetooth: SCO socket layer initialized
Nov 27 12:42:50 linux-u0fs bluetoothd[5669]: HCI dev 0 registered
Nov 27 12:42:50 linux-u0fs dns-resolver: ATTENTION: You have modified /etc/resolv.conf. Leaving it untouched...
Nov 27 12:42:50 linux-u0fs dns-resolver: You can find my version in /etc/resolv.conf.netconfig
Nov 27 12:42:50 linux-u0fs bluetoothd[5669]: HCI dev 0 up
Nov 27 12:42:50 linux-u0fs bluetoothd[5669]: Starting security manager 0
Nov 27 12:42:50 linux-u0fs bluetoothd[5669]: Parsing /etc/bluetooth/serial.conf failed: No such file or directory
Nov 27 12:42:50 linux-u0fs bluetoothd[5669]: Adapter /org/bluez/5662/hci0 has been enabled
Nov 27 12:42:50 linux-u0fs kernel: [ 251.840945] Bluetooth: RFCOMM TTY layer initialized
Nov 27 12:42:50 linux-u0fs kernel: [ 251.840954] Bluetooth: RFCOMM socket layer initialized
Nov 27 12:42:50 linux-u0fs kernel: [ 251.840958] Bluetooth: RFCOMM ver 1.11
Nov 27 12:42:51 linux-u0fs kernel: [ 252.174615] scsi 6:0:0:0: Direct-Access Generic CF Card CF 0.1C PQ: 0 ANSI: 0 CCS
Nov 27 12:42:51 linux-u0fs kernel: [ 252.174923] sd 6:0:0:0: Attached scsi generic sg3 type 0
Nov 27 12:42:51 linux-u0fs kernel: [ 252.181505] scsi 6:0:0:1: Direct-Access Generic MS/SD Combo MS 0.1C PQ: 0 ANSI: 0 CCS
Nov 27 12:42:51 linux-u0fs kernel: [ 252.181846] sd 6:0:0:1: Attached scsi generic sg4 type 0
Nov 27 12:42:51 linux-u0fs kernel: [ 252.189333] scsi 6:0:0:2: Direct-Access Generic SM/xD Combo SM 0.1C PQ: 0 ANSI: 0 CCS
Nov 27 12:42:51 linux-u0fs kernel: [ 252.189624] sd 6:0:0:2: Attached scsi generic sg5 type 0
Nov 27 12:42:51 linux-u0fs kernel: [ 252.191646] sd 6:0:0:0: [sdb] Attached SCSI removable disk
Nov 27 12:42:51 linux-u0fs kernel: [ 252.196773] sd 6:0:0:1: [sdc] Attached SCSI removable disk
Nov 27 12:42:51 linux-u0fs kernel: [ 252.200864] sd 6:0:0:2: [sdd] Attached SCSI removable diskIch möchte wissen was bedeutet die Fehlermeldung.
Ist das ein Hardware Fehler?
