Keien Verbindung mit pppd über ISDN Saphir V (Kernel 2.6.11)

[Mephilius]

Hallo zusammen.

Ich bin total verzeweifelt. Versuche seit drei Tagen mit einer HST Saphir V Karte über pppd eine ppp-Verbindung herzustellen. Der ISDN-Verbindungsaufbau funktioniert, aber es kommt keine wirkliche Datenverbindung zustande.

Angeblich hätte ein Trace, das ich gezogen habe, und ein Mitarbeiter des Kartenherstellers (HSTNET) analysiert hat ergeben, daß die Karte die eigentlich Datenverbindung aufbaut, aber der pppd keine Daten schickt.

Der Treiber (mcaxe) der Karte und der capi-Treiber sind installiert und laufen.

capiinfo zeigt an, daß ein Controller mit 30 Kanälen installiert ist.

Meine Konfiguration ist wie folgt:

Pentium 1,6GHz
HST Saphir V (Multiplexkarte mit 30 Kanälen)
SuSE Linux 9.3
Kernel 2.6.11
pppd 2.4.3


Hier das Log der Anwahl:

Plugin userpass.so loaded.
userpass: $Revision: 1.5 $
Plugin capiplugin.so loaded.
capiplugin: $Revision: 1.36 $
capiconn: 1.13
capiplugin: phase serialconn.
capiplugin: contr=1
capiplugin: contr=1
capiplugin: contr=1
capiplugin: contr=1
controller 1: listen_change_state 0 -> 1
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
plci_change_state:0x0 0 -> 1 event=1
capiplugin: dialing 03039984330 (hdlc)
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
plci_change_state:0xb01 1 -> 2 event=3
plci_change_state:0xb01 2 -> 3 event=6
ncci_change_state:0xb01 0 -> 1 event=1
ncci_change_state:0x10b01 1 -> 3 event=3
capiplugin: "" -> "03039984330" outgoing (pcli=0xb01/ncci=0x10b01): charge in units: 48318452
ncci_change_state:0x10b01 3 -> 4 event=7
ncci 0x10b01 up
capiplugin: connected: "" -> "03039984330" outgoing (pcli=0xb01/ncci=0x10b01)
capiplugin: using /dev/capi/0: "" -> "03039984330" outgoing (pcli=0xb01/ncci=0x10b01)
using channel 9
Using interface ppp0
Connect: ppp0 <--> /dev/capi/0
capiplugin: phase establish (was serialconn).
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1514> < 17 04 00 07> <auth chap MD5> <magic 0xb4a460a6> <pcomp> <accomp> <callback CBCP> <mrru 1514> <endpoint [local:41.44.43.2d.49.41.53.34.43.44.46.33.43.44.31]>]
sent [LCP ConfRej id=0x1 < 17 04 00 07> <callback CBCP> <mrru 1514>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x2 <mru 1514> < 17 04 00 07> <auth chap MD5> <magic 0xb4a53bfd> <pcomp> <accomp> <callback CBCP> <mrru 1514> <endpoint [local:41.44.43.2d.49.41.53.34.43.44.46.33.43.44.31]>]
sent [LCP ConfRej id=0x2 < 17 04 00 07> <callback CBCP> <mrru 1514>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x3 <mru 1514> < 17 04 00 07> <auth chap MD5> <magic 0xb4a53f40> <pcomp> <accomp> <callback CBCP> <mrru 1514> <endpoint [local:41.44.43.2d.49.41.53.34.43.44.46.33.43.44.31]>]
sent [LCP ConfRej id=0x3 < 17 04 00 07> <callback CBCP> <mrru 1514>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x4 <mru 1514> < 17 04 00 07> <auth chap MD5> <magic 0xb4a5842f> <pcomp> <accomp> <callback CBCP> <mrru 1514> <endpoint [local:41.44.43.2d.49.41.53.34.43.44.46.33.43.44.31]>]
sent [LCP ConfRej id=0x4 < 17 04 00 07> <callback CBCP> <mrru 1514>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x5 <mru 1514> < 17 04 00 07> <auth chap MD5> <magic 0xb4a612df> <pcomp> <accomp> <callback CBCP> <mrru 1514> <endpoint [local:41.44.43.2d.49.41.53.34.43.44.46.33.43.44.31]>]
sent [LCP ConfRej id=0x5 < 17 04 00 07> <callback CBCP> <mrru 1514>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x6 <mru 1514> < 17 04 00 07> <auth chap MD5> <magic 0xb4a7120c> <pcomp> <accomp> <callback CBCP> <mrru 1514> <endpoint [local:41.44.43.2d.49.41.53.34.43.44.46.33.43.44.31]>]
sent [LCP ConfRej id=0x6 < 17 04 00 07> <callback CBCP> <mrru 1514>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x7 <mru 1514> < 17 04 00 07> <auth chap MD5> <magic 0xb4a77b5a> <pcomp> <accomp> <callback CBCP> <mrru 1514> <endpoint [local:41.44.43.2d.49.41.53.34.43.44.46.33.43.44.31]>]
sent [LCP ConfRej id=0x7 < 17 04 00 07> <callback CBCP> <mrru 1514>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x8 <mru 1514> < 17 04 00 07> <auth chap MD5> <magic 0xb4a856ce> <pcomp> <accomp> <callback CBCP> <mrru 1514> <endpoint [local:41.44.43.2d.49.41.53.34.43.44.46.33.43.44.31]>]
sent [LCP ConfRej id=0x8 < 17 04 00 07> <callback CBCP> <mrru 1514>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x9 <mru 1514> < 17 04 00 07> <auth chap MD5> <magic 0xb4a899ad> <pcomp> <accomp> <callback CBCP> <mrru 1514> <endpoint [local:41.44.43.2d.49.41.53.34.43.44.46.33.43.44.31]>]
sent [LCP ConfRej id=0x9 < 17 04 00 07> <callback CBCP> <mrru 1514>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0xa <mru 1514> < 17 04 00 07> <auth chap MD5> <magic 0xb4a8bc2b> <pcomp> <accomp> <callback CBCP> <mrru 1514> <endpoint [local:41.44.43.2d.49.41.53.34.43.44.46.33.43.44.31]>]
sent [LCP ConfRej id=0xa < 17 04 00 07> <callback CBCP> <mrru 1514>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
capiplugin: "" -> "03039984330" outgoing (pcli=0xb01/ncci=0x10b01): charge in units: 65095668
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
rcvd [LCP DiscReq id=0xb magic=0xb4a8bc2b 41 63 63 65 73 73 20 53 65 72 76 65 72 20 31 2e 30 30 2e 37 32 20 49 4e 20 49 44 45 4e 54 20 41 ....]
rcvd [LCP TermReq id=0xc]
sent [LCP TermAck id=0xc]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
rcvd [LCP DiscReq id=0xd magic=0xb4a8bc2b 41 63 63 65 73 73 20 53 65 72 76 65 72 20 31 2e 30 30 2e 37 32 20 49 4e 20 49 44 45 4e 54 20 41 ....]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb1de8338> <pcomp> <accomp>]
capiplugin: "" -> "03039984330" outgoing (pcli=0xb01/ncci=0x10b01): charge in units: 65095668
ncci_change_state:0x10b01 4 -> 7 event=10
ncci_change_state:0x10b01 7 -> 0 event=13
plci_change_state:0xb01 3 -> 7 event=8
DISCONNECT_IND reason 0x3490 (Normal call clearing) for plci 0xb01
plci_change_state:0xb01 7 -> 8 event=9
plci_change_state:0xb01 8 -> 0 event=11
capiplugin: disconnect(remote): "" -> "03039984330" outgoing (pcli=0xb01/ncci=0x10b01) 0x3490 (0x3301) - Normal call clearing
Modem hangup
capiplugin: phase disconnect (was establish).
Connection terminated.
capiplugin: phase dead (was disconnect).
controller 1: listen_change_state 0 -> 1
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
controller 1: listen_change_state 0 -> 1
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
capiplugin: exit

Hier wurd eine Verbindung zu einem AVM-Server aufgebaut. Die Datenblöcke mit <callback CBCP> kommen erst, nachdem mein pppd ein paar Sekunden keine Daten gesendet hat. Wenn ich meinen eigentlichen Linux-Rechner anwähle, dann kommen nur leere Datenframes hin und zurück.

Die gleichen Anwahlen von einem Rechner mit einer AVM-Fritz-Card und einem SuSE Linux 9.0 mit Kernel 2.4 und pppd 2.4.1 funktionieren perfekt. An den AVM-Server sowie an den Server, den ich eigentlich damit anwählen möchte.

Wer kann mir helfen. Habe schon was gefunden, daß bei Kernel 2.6 Probleme mit dem device /dev/capi/ gibt. Habe alle Tipps schon ausgetestet. Keiner funktionierte.

Danke schon mal für die Hilfe.

Gruß
Mephilius