• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Kein USB 1.1 bei SuSe 9.2

Hallo Leute!

Ich habe ein HP Pavilion zv5000ea Notebook und SuSe 9.2 erkennt die USB Ports nicht.
Beim Startvorgang leuchtet die Maus bis zur Netzwerkkonfiguration, dann kann ich in KDE nur noch meine ext. Festplatte ansprechen, die ja am usb 2.0 hängt. Bei der Maus oder Drucker geht das nicht.

Ich habe einen nvidia Chipsatz installiert.

linux:/home/bodo # lsmod
Module Size Used by
nvram 8328 0
usbserial 26856 0
parport_pc 37824 1
lp 10536 0
parport 37960 2 parport_pc,lp
cpufreq_userspace 5208 2
powernow_k8 11652 0
speedstep_lib 4228 0
freq_table 4356 1 powernow_k8
thermal 17928 0
processor 25640 2 powernow_k8,thermal
fan 5380 0
button 8464 0
battery 11396 0
ac 6404 0
snd_pcm_oss 57896 0
snd_mixer_oss 19200 1 snd_pcm_oss
snd_intel8x0 31396 2
snd_ac97_codec 69728 1 snd_intel8x0
snd_pcm 96776 4 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 24708 1 snd_pcm
snd 60164 9 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_
codec,snd_pcm,snd_timer
soundcore 9056 1 snd
snd_page_alloc 10248 2 snd_intel8x0,snd_pcm
irda 119484 0
slamr 408264 0
crc_ccitt 2176 1 irda
bnep 15616 2
rfcomm 35356 2
hidp 15232 2
l2cap 23044 14 bnep,rfcomm,hidp
bluetooth 44932 6 bnep,rfcomm,hidp,l2cap
ipt_TOS 2560 14
ip6t_LOG 6656 17
ip6t_limit 2432 17
ipt_LOG 6912 30
ipt_limit 2432 30
ipt_pkttype 1792 2
edd 10012 0
af_packet 20872 2
ip6t_state 2048 22
ip6_conntrack 38404 1 ip6t_state
ipt_state 2176 28
ip6t_REJECT 7552 3
ipt_REJECT 6784 3
iptable_mangle 2944 1
iptable_filter 3072 1
ip6table_mangle 2688 0
ip_nat_ftp 5232 0
iptable_nat 23980 1 ip_nat_ftp
ip_conntrack_ftp 72752 1 ip_nat_ftp
ip_conntrack 43512 4 ipt_state,ip_nat_ftp,iptable_nat,ip_conntrack_ft
p
ip_tables 17664 9 ipt_TOS,ipt_LOG,ipt_limit,ipt_pkttype,ipt_state,
ipt_REJECT,iptable_mangle,iptable_filter,iptable_nat
ip6table_filter 2816 1
ip6_tables 18816 6 ip6t_LOG,ip6t_limit,ip6t_state,ip6t_REJECT,ip6ta
ble_mangle,ip6table_filter
ipv6 237312 15 ip6_conntrack,ip6t_REJECT
sg 35872 0
st 37404 0
sd_mod 16912 0
sr_mod 16292 0
scsi_mod 111052 4 sg,st,sd_mod,sr_mod
ds 17796 4
ide_cd 38176 0
cdrom 36508 2 sr_mod,ide_cd
subfs 7552 1
nls_cp437 5888 1
vfat 13056 1
fat 43168 1 vfat
nls_utf8 2176 2
ntfs 91888 1
yenta_socket 19840 0
pcmcia_core 66100 2 ds,yenta_socket
ohci1394 31748 0
ieee1394 106168 1 ohci1394
amd64_agp 10440 1
agpgart 32168 1 amd64_agp
ehci_hcd 29188 0
ohci_hcd 20228 0
dm_mod 54524 0
8139too 24064 0
mii 4992 1 8139too
usbcore 106724 5 usbserial,ehci_hcd,ohci_hcd
joydev 9664 0
evdev 8960 0
reiserfs 242000 1
linux:/home/bodo # lsmod
Module Size Used by
nvram 8328 0
usbserial 26856 0
parport_pc 37824 1
lp 10536 0
parport 37960 2 parport_pc,lp
cpufreq_userspace 5208 2
powernow_k8 11652 0
speedstep_lib 4228 0
freq_table 4356 1 powernow_k8
thermal 17928 0
processor 25640 2 powernow_k8,thermal
fan 5380 0
button 8464 0
battery 11396 0
ac 6404 0
snd_pcm_oss 57896 0
snd_mixer_oss 19200 1 snd_pcm_oss
snd_intel8x0 31396 2
snd_ac97_codec 69728 1 snd_intel8x0
snd_pcm 96776 4 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 24708 1 snd_pcm
snd 60164 9 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 9056 1 snd
snd_page_alloc 10248 2 snd_intel8x0,snd_pcm
irda 119484 0
slamr 408264 0
crc_ccitt 2176 1 irda
bnep 15616 2
rfcomm 35356 2
hidp 15232 2
l2cap 23044 14 bnep,rfcomm,hidp
bluetooth 44932 6 bnep,rfcomm,hidp,l2cap
ipt_TOS 2560 14
ip6t_LOG 6656 17
ip6t_limit 2432 17
ipt_LOG 6912 30
ipt_limit 2432 30
ipt_pkttype 1792 2
edd 10012 0
af_packet 20872 2
ip6t_state 2048 22
ip6_conntrack 38404 1 ip6t_state
ipt_state 2176 28
ip6t_REJECT 7552 3
ipt_REJECT 6784 3
iptable_mangle 2944 1
iptable_filter 3072 1
linux:/home/bodo # lsmod
Module Size Used by
nvram 8328 0
usbserial 26856 0
parport_pc 37824 1
lp 10536 0
parport 37960 2 parport_pc,lp
cpufreq_userspace 5208 2
powernow_k8 11652 0
speedstep_lib 4228 0
freq_table 4356 1 powernow_k8
thermal 17928 0
processor 25640 2 powernow_k8,thermal
fan 5380 0
button 8464 0
battery 11396 0
ac 6404 0
snd_pcm_oss 57896 0
snd_mixer_oss 19200 1 snd_pcm_oss
snd_intel8x0 31396 2
snd_ac97_codec 69728 1 snd_intel8x0
snd_pcm 96776 4 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 24708 1 snd_pcm
snd 60164 9 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 9056 1 snd
snd_page_alloc 10248 2 snd_intel8x0,snd_pcm
irda 119484 0
slamr 408264 0
crc_ccitt 2176 1 irda
bnep 15616 2
rfcomm 35356 2
hidp 15232 2
l2cap 23044 14 bnep,rfcomm,hidp
bluetooth 44932 6 bnep,rfcomm,hidp,l2cap
ipt_TOS 2560 14
ip6t_LOG 6656 17
ip6t_limit 2432 17
ipt_LOG 6912 30
ipt_limit 2432 30
ipt_pkttype 1792 2
edd 10012 0
af_packet 20872 2
ip6t_state 2048 22
ip6_conntrack 38404 1 ip6t_state
ipt_state 2176 28
ip6t_REJECT 7552 3
ipt_REJECT 6784 3
iptable_mangle 2944 1
iptable_filter 3072 1
ip6table_mangle 2688 0
ip_nat_ftp 5232 0
iptable_nat 23980 1 ip_nat_ftp
ip_conntrack_ftp 72752 1 ip_nat_ftp
ip_conntrack 43512 4 ipt_state,ip_nat_ftp,iptable_nat,ip_conntrack_ftp
ip_tables 17664 9 ipt_TOS,ipt_LOG,ipt_limit,ipt_pkttype,ipt_state,ipt_REJECT,iptable_mangle,iptable_filter,iptable_nat
ip6table_filter 2816 1
ip6_tables 18816 6 ip6t_LOG,ip6t_limit,ip6t_state,ip6t_REJECT,ip6table_mangle,ip6table_filter
ipv6 237312 15 ip6_conntrack,ip6t_REJECT
sg 35872 0
st 37404 0
sd_mod 16912 0
sr_mod 16292 0
scsi_mod 111052 4 sg,st,sd_mod,sr_mod
ds 17796 4
ide_cd 38176 0
cdrom 36508 2 sr_mod,ide_cd
subfs 7552 1
nls_cp437 5888 1
vfat 13056 1
fat 43168 1 vfat
nls_utf8 2176 2
ntfs 91888 1
yenta_socket 19840 0
pcmcia_core 66100 2 ds,yenta_socket
ohci1394 31748 0
ieee1394 106168 1 ohci1394
amd64_agp 10440 1
agpgart 32168 1 amd64_agp
ehci_hcd 29188 0
ohci_hcd 20228 0
dm_mod 54524 0
8139too 24064 0
mii 4992 1 8139too
usbcore 106724 5 usbserial,ehci_hcd,ohci_hcd
joydev 9664 0
evdev 8960 0
reiserfs 242000 1
linux:/home/bodo #

linux:/home/bodo # lspci
0000:00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
0000:00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6)
0000:00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
0000:00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
0000:00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
0000:00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2)
0000:00:06.1 Modem: nVidia Corporation: Unknown device 00d9 (rev a2)
0000:00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5)
0000:00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2)
0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
0000:01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 440 Go 64M] (rev a3)
0000:02:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
0000:02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:02:02.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
0000:02:04.0 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
0000:02:04.1 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
0000:02:04.2 System peripheral: Texas Instruments PCI1620 Firmware Loading Function (rev 01)
linux:/home/bodo #

linux:/home/bodo # lsusb
Bus 001 Device 001: ID 0000:0000

linux:/home/bodo # dmesg
Linux version 2.6.8-24.11-default (geeko@buildhost) (gcc version 3.3.4 (pre 3.3.5 20040809)) #1 Fri Jan 14 13:01:26 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
BIOS-e820: 000000001ff70000 - 000000001ff7f000 (ACPI data)
BIOS-e820: 000000001ff7f000 - 000000001ff80000 (ACPI NVS)
BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
502MB vmalloc/ioremap area available.
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 130928
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126832 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f7260
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1ff7a87e
ACPI: FADT (v001 NVIDIA CK8 0x06040000 PTL_ 0x000f4240) @ 0x1ff7ee13
ACPI: MADT (v001 NVIDIA NV_APIC_ 0x06040000 LTP 0x00000000) @ 0x1ff7ee87
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1ff7eee1
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x1ff7ef09
ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
ACPI: local apic disabled
Built 1 zonelists
Kernel command line: root=/dev/hda3 vga=0x317 selinux=0 resume=/dev/hda4 desktop elevator=as splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 797.944 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513484k/523712k available (2076k kernel code, 9580k reserved, 780k data, 212k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1576.96 BogoMIPS (lpj=788480)
Security Scaffold v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000
CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) 64 Processor 3400+ stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: Looking for DSDT in initrd... not found!
ACPI: IRQ9 SCI: Edge set to Level Trigger.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1168k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040715
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 33)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUS0] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUS1] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUS2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LPID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:02.1 -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:06.1 -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:02:04.1 -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
Simple Boot Flag at 0x37 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1108020408.4294965849:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xf0000000, mapped to 0xe0880000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:ea90
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 35007 bytes,<6>...found (1024x768, 21643 bytes, v3).
Console: switching to colour frame buffer device 127x43
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ACPI: PCI interrupt 0000:00:06.1 -> GSI 10 (level, low) -> IRQ 10
Using anticipatory io scheduler
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3-150: IDE controller at PCI slot 0000:00:08.0
NFORCE3-150: chipset revision 165
NFORCE3-150: not 100% native mode: will probe irqs later
NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller
ide0: BM-DMA at 0x2080-0x2087, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2088-0x208f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: FUJITSU MHT2080AT PL, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST DVD-RW GWA-4080N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 > hda3 hda4
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
alps.c: E6 report: 00 00 64
alps.c: E7 report: 73 02 0a
alps.c: E6 report: 00 00 64
alps.c: E7 report: 73 02 0a
alps.c: Status: 15 01 0a
ALPS Touchpad (Glidepoint) detected
Disabling hardware tapping
alps.c: Status: 11 01 0a
input: AlpsPS/2 ALPS TouchPad on isa0060/serio4
input: PC Speaker
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
PM: Reading pmdisk image.
swsusp: Resume From Partition: /dev/hda4
<3>swsusp: Invalid partition type.
pmdisk: Error -22 resuming
PM: Resume from disk failed.
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices:
USB0 USB1 USB2 PS2K PS2M MAC0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 212k freed
bootsplash: status on console 0 changed to off
Adding 1048312k swap on /dev/hda4. Priority:42 extents:1
reiserfs: enabling write barrier flush mode
evdev_connect: evdev c154b440 handle c154b45c name event0
evdev_connect: evdev c154b340 handle c154b35c name event1
evdev_connect: evdev c154b240 handle c154b25c name event2
usbcore: registered new driver usbfs
usbcore: registered new driver hub
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL8139 at 0xe084c800, 00:0f:b0:43:c8:ea, IRQ 10
eth0: Identified 8139 chip type 'RTL-8101'
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.0: OHCI Host Controller
Linux agpgart interface v0.100 (c) Dave Jones
ieee1394: Initialized config rom entry `ip1394'
ohci_hcd 0000:00:02.0: USB HC TakeOver failed!
ohci_hcd 0000:00:02.0: can't reset
ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -1
ohci_hcd: probe of 0000:00:02.0 failed with error -1
ACPI: PCI interrupt 0000:00:02.1 -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:02.1: OHCI Host Controller
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
NTFS driver 2.1.17 [Flags: R/O MODULE].
NTFS volume version 3.1.
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
subfs 0.9
ohci_hcd 0000:00:02.1: USB HC TakeOver failed!
ohci_hcd 0000:00:02.1: can't reset
ohci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -1
ohci_hcd: probe of 0000:00:02.1 failed with error -1
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:02.2: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 10, pci mem e084e000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.8-24.11-default ehci_hcd
usb usb1: SerialNumber: 0000:00:02.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 128M @ 0xe8000000
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e0108000-e01087ff] Max Packet=[2048]
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:04.0 [103c:006d]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x01111d22, devctl 0x64
Yenta: ISA IRQ mask 0x00f8, PCI irq 11
Socket status: 30000006
ACPI: PCI interrupt 0000:02:04.1 -> GSI 10 (level, low) -> IRQ 10
Yenta: CardBus bridge found at 0000:02:04.1 [103c:006d]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.1, mfunc 0x01111d22, devctl 0x64
Yenta: ISA IRQ mask 0x00f8, PCI irq 10
Socket status: 30000006
ieee1394: Host added: ID:BUS[0-00:1023] GUID[4b3f02004b3f0200]
module i82365 unsupported by SUSE/Novell, tainting kernel.
Intel ISA PCIC probe: not found.
Device 'i823650' does not have a release() function, it is broken and must be fixed.
Badness in device_release at drivers/base/core.c:85
[<c01d0409>] kobject_cleanup+0x69/0x70
[<c01d0410>] kobject_release+0x0/0x10
[<c01d0714>] kref_put+0x24/0x70
[<e112a21d>] init_i82365+0x17d/0x192 [i82365]
[<c01307f4>] sys_init_module+0x114/0x1a0
[<c0105c69>] sysenter_past_esp+0x52/0x79
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
SCSI subsystem initialized
st: Version 20040403, fixed bufsize 32768, s/g segs 256
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: clean.
cs: IO port probe 0x0800-0x080f: clean.
cs: IO port probe 0x03e0-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0100-0x03af: excluding 0x200-0x20f 0x378-0x37f
cs: IO port probe 0x0a00-0x0aff: clean.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c037f760(lo)
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4091 buckets, 32728 max) - 336 bytes per conntrack
ip6_conntrack version 0.1 (4091 buckets, 32728 max) - 208 bytes per conntrack
eth0: link down
NET: Registered protocol family 17
Disabled Privacy Extensions on device de9ee000(sit0)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
eth0: no IPv6 routers present
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.4
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.0
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
module slamr unsupported by SUSE/Novell, tainting kernel.
slamr: module license 'Smart Link Ltd.' taints kernel.
slamr: SmartLink AMRMO modem.
NET: Registered protocol family 23
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49357 usecs
intel8x0: clocking to 47383
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Thermal Zone [THRM] (24 C)
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09b)
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 (1500 mV)
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x12 (1100 mV)
powernow-k8: cpu_init done, current fid 0x0, vid 0x12
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Non-volatile memory driver v1.2
spurious 8259A interrupt: IRQ7.
linux:/home/bodo #

Ich hab hier noch meine /etc/fstab:

/dev/hda3 / reiserfs acl,user_xattr 1 1
/dev/hda6 /boot ext2 acl,user_xattr 1 2
/dev/hda1 /windows/C ntfs ro,users,gid=users,umask=0002,nls=utf8 0 0
/dev/hda5 /windows/D vfat users,gid=users,umask=0002,iocharset=utf8 0 0
/dev/hda4 swap swap pri=42 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
proc /proc proc defaults 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
sysfs /sys sysfs noauto 0 0
/dev/dvdrecorder /media/dvdrecorder subfs fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=utf8 0 0

Im Syslog tut sich nix beim ein und ausstecken der Maus.

Ich glaub das sind erst mal genug Informationen. Vieleicht kann mir ja einer Helfen.

Gruß Bodo
 

misiu

Moderator
Teammitglied
Vielleicht muss die Erkennungsfolge am usb "umgedreht"
werden. Für USB sind 3-Module zuständig:
ehci_hcd : USB2
ohci_hcd : USB1.1 TYP1
uhci_hcd : USB1.1 TYP2

Wie du siehst, wird bei dir erst USB2 geladen:
usbcore 106724 5 usbserial,ehci_hcd,ohci_hcd

Du kannst probieren diese Reihenfolge zu ändern:
in YAST, /etc/sysconfig-editor -> system -> kernel -> MODULES_LOADED_ON_BOOT
ohci-hcd eintragen.
Dann wird USB 1.1 zuerst geladen. Sollte es nicht
klappen , versuche mit Modul "uhci-usb"
(Mit dem Strich nicht verwechseln , unbedingt so:
ohci-hcd und nicht so ohci_hcd), es ist so, wie
in SuSEPortal geschrieben, nur umgekehrt:
http://portal.suse.com/sdb/de/2004/01/USB_2_0.html

Sollte der Eintrag ehci-hcd schon drin sein, lösche den
und schau, was dann passiert, bevor du was Einträgst.

Es ist auch möglich mehrere Module einzutragen:

ohci-hcd uhci-hcd ehci-hcd
(Leerzeichen zwischen Modulen)

oder , als root von der Kommandozeile (sog.Shell),
die Module von Hand nachladen:

modprobe Modulname

MfG
misiu
 
:D Hat sich erledigt.
Schuld war das Powermanagement. Ich habe in der Bootoption "acpi=off noapic" eingegeben und voila....
Einfacher Befehl, große Wirkung.
Trotzdem danke für Eure Hilfe.

Gruß Bodo
 
Oben