• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Lcd4Linux.conf für Display (4 Zeilen, 20 Zeichen) Konfigurie

P

Psycho Mantis

Hi,

Ich habe ein LCD Display 4 Zeilen mit je 20 Zeichen an denn Parralel Port meines Rechners angeschlossen.

stka hat mir geholfen das Programm Lcd4Linux zum laufen zu bekommen. Danke nochmal an dieser stelle stka.
Das Programm läuft aber mein Display zeigt noch nichts an da ich die lcd4linux.conf nicht Konfigueriern kann.
Die lcd4linux.conf sieht so aus: http://phpfi.com/169025 Zeile Nr. 10 hat sich geändert in: #Port '/dev/lp0' . Sonst könnte ich das programm nicht starten.

Ich habe mein Display unter suse 9.3 mit der alten version von lcd4linux zum laufen bekommen. Wenn ihr die alte lcd4linux.conf sehen wollt, dann nur mal anschreiben :wink:

Wie muss ich was ändern damit mein Display was anzeigt ?

SuSE 10.1
 
OP
P

Psycho Mantis

Hi,

Das oben geschriebene von der Zeile 10 war Falsch. Ich habe von der seite: http://ssl.bulix.org/projects/lcd4linux/wiki/Howto_de das Display als Beispiel genommen und habe es kopiert. Ich habe auch alles angepast d.h.
- 20x4 eingestellt
- Port angepast auf #Port '/dev/lp0'
- und ganz unten denn namen eingetragen

in der konsole kommt:

HD44780: ioctl(/dev/lp0, PPCLAIM) failed: 22 Invalid argument
HD44780: could not initialize parallel port!
HD44780: start display failed!

nach der eingabe von: lcd4linux -Fvv
 
OP
P

Psycho Mantis

Hi,

OK Es funktioniert: Es hat ein Modul gefehlt:

modprobe ppdev

als root eingeben. Dann änder sich auch der Port nach: /dev/parport0 dann noch lcd4linux -Fvv eingegeben und es hat funktioniert



Hier ist jetzt mal meine neue lcd4linux.conf :

Code: 
Variables {
   tick 500
   tack 100
   minute 60000
}







Display HD44780-20x4 {
    Driver  'HD44780'
    Model   'generic'
    UseBusy  1
    Port    '/dev/parport0'
    Size    '20x4'
    Wire {
        RW      'AUTOFD'
        RS      'INIT'
        ENABLE  'STROBE'
        ENABLE2 'GND'
        GPO     'GND'
    }

}







Display SerDispLib {
    Driver 'serdisplib'
    Port 'PAR:/dev/parports/0'
    #Port '/dev/tts/0'	
    Model 'OPTREX323'
    Options ''
}


Display Trefon {
    Driver 'TREFON'
    Size '16x2'
    Backlight 1
    Icons 1
}


Display LCD-Linux {
    Driver 'LCD-Linux'
    Size '20x2'
    UseBusy 0
}

Display LCD2USB {
    Driver 'LCD2USB'
    Size '20x2'
    Backlight 1
    Icons 1
}


Display LCD2041 {
    Driver 'MatrixOrbital'
    Model 'LCD2041'
    Port '/dev/tts/0'
    Speed 19200
    Contrast 160
}

Display LK202 {
    Driver 'MatrixOrbital'
    Model 'LK202-24-USB'
    Port '/dev/tts/USB0'
    Speed 19200
    Contrast 256/2
}

Display LK204 {
    Driver 'MatrixOrbital'
    Model 'LK204-24-USB'
    Port '/dev/usb/tts/0'
#   Port '/dev/tts/0'
    Speed 19200
    Contrast 256/2
}


Display MI240 {
    Driver 'MilfordInstruments'
    Model 'MI240'
    Port '/dev/tts/0'
    Speed 19200
}


Display CW12232 {
    Driver 'Cwlinux'
    Model 'CW12232'
    Port '/dev/usb/tts/0'
    Speed 19200
    Brightness 2
    Icons 1
}


Display CF631 {
    Driver 'Crystalfontz'
    Model '631'
    Port '/dev/tts/USB0'
    Speed 115200
    Contrast 95
    Backlight 50
    Icons 1
}

Display CF632 {
    Driver 'Crystalfontz'
    Model '632'
    Port '/dev/tts/0'
    Speed 19200
    Icons 1
}

Display CF633 {
    Icons 1
    Driver 'Crystalfontz'
    Model '633'
    Port '/dev/tts/0'
    Speed 19200
    Contrast 16
    Backlight 50
}

Display Curses {
    Driver 'Curses'
    Size '20x6'
}

# generic HD44780 display (LCD4Linux wiring)
Display HD44780-generic {
    Driver 'HD44780'
    Model 'generic'
    Port '/dev/parports/0'	
    Size '8x2'
    asc255bug 0
    GPOs 8
    Wire {
	RW      'GND'
	RS      'AUTOFD'
	ENABLE  'STROBE'
	ENABLE2 'GND'
	GPO     'INIT'
	POWER   'GND'
    }
}

# generic HD44780 display (WinAmp wiring)
Display HD44780-winamp {
    Driver 'HD44780'
    Model 'generic'
    UseBusy 1
    Port '/dev/parports/0'	
    Size '20x4'
    asc255bug 1
    Wire {
	RW      'AUTOFD'
	RS      'INIT'
	ENABLE  'STROBE'
	ENABLE2 'GND'
	GPO     'GND'
	POWER   'GND'
    }
    Timing {
	# low-level communication [ns]
	CY 1000  # Enable cycle time
	PW  450  # Enable pulse width
	AS  140  # Address setup time
	AH   20  # Address hold time
	# HD44780 execution timings [us]
	INIT1 4100  # first init sequence: 4.1 msec
	INIT2  100  # second init sequence: 100 usec
	EXEC    80  # normal execution time
	WRCG   120  # CG RAM Write
	CLEAR 2250  # Clear Display
	HOME  2250  # Return Cursor Home
	ONOFF 2250  # Display On/Off Control
	# GPO timing [ns]
	GPO_ST  20  # 74HCT573 set-up time
	GPO_PW 230  # 74HCT573 enable pulse width
	# Power supply timing [ms]
	POWER  500  # power-on delay
    }
}

# Dual-HD44780 display from Pollin
Display WDC2704M {
    Driver 'HD44780'
    Model 'generic'
    Controllers 2
    UseBusy 1
    Port '/dev/parports/0'	
    Size '27x4'
    Wire {
	RW      'AUTOFD'
	RS      'INIT'
	ENABLE  'STROBE'
	ENABLE2 'SLCTIN'
	GPO     'GND'
	POWER   'GND'
    }
}

# HD44780 display from www.kernelconcepts.de
Display HD44780-kernelconcepts {
    Driver 'HD44780'
    Model 'HD66712'
    UseBusy 1
    Port '/dev/parports/0'	
    Size '20x4'
    Wire {
	RW      'AUTOFD'
	RS      'INIT'
	ENABLE  'STROBE'
	ENABLE2 'GND'
	GPO     'GND'
	POWER   'GND'
    }
}

Display SC1602D {
    Driver 'HD44780'
    Port '/dev/parports/0'	
    Bits '8'
    Size '16x2'
    asc255bug 0
    Icons 1
    Wire {
	RW     'GND'
	RS     'AUTOFD'
	ENABLE 'STROBE'
	GPO    'INIT'
	POWER  'GND'
    }
}


Display LCM-162 {
    Driver 'HD44780'
    Model 'LCM-162'
#   Bus 'parport'
    Port '/dev/parports/0'	
    Size '16x2'
    UseBusy 1
    asc255bug 0
    Icons 1
}


Display HD44780-I2C {
    Driver 'HD44780'
    Model 'generic'
    Bus 'i2c'
    Port '/dev/i2c-0'
    Device '70'
    Bits '4'
    Size '20x4'
    asc255bug 0
    Icons 1
    Wire {
        RW     'DB5'
        RS     'DB4'
        ENABLE 'DB6'
        GPO    'GND'
    }
}


Display LCDTerm {
    Driver 'LCDTerm
    Port '/dev/tts/0'
    Speed 19200
    Size '20x4'
    Icons 1
}

Display SimpleLCD {
    Driver 'SimpleLCD'
    Port '/dev/tts/0'
    Speed 1200
    Options 0
    Size '20x2'
}

Display BA63 {
    Driver   'WincorNixdorf'
    Model    'BA63'
    Port     '/dev/tts/0'
#   Port     '/dev/tts/USB0'
    Speed     9600
    BarChar   219
    SelfTest  0
}

Display M50530-24x8 {
    Driver 'M50530'
    Port '/dev/parports/0'	
#   Port '0x378'
    Size '24x8'
    Font '5x7'
    Duty 2
    Wire.EX   'STROBE'
    Wire.IOC1 'SLCTIN'
    Wire.IOC2 'AUTOFD'
    Wire.GPO  'INIT'
}


Display CT20x4 {
    Driver 'Beckmann+Egle'
    Model 'CT20x4'
    Port '/dev/tts/0'
#    Size '16x2'
#    Contrast 7
#    Backlight 1
    Icons 1
}


Display USBLCD {
    Driver 'USBLCD'
#   Port '/dev/lcd0'
    Port 'libusb'
    Size '20x4'
    asc255bug 1
    Icons 1
}


Display BWCT {
    Driver 'BWCT'
    Size '20x4'
    Contrast 220
    asc255bug 1
    Icons 1
}


Display T6963-240x64 {
    Driver 'T6963'
    Port '/dev/parports/0'
    Size '240x64'
    Wire.CE 'STROBE'
    Wire.CD 'SLCTIN'
    Wire.RD 'AUTOFD'
    Wire.WR 'INIT'
}


Display LPH7508 {
    Driver 'LPH7508'
    Port   '/dev/parports/0'
    Font   '6x8'
    Contrast 15
}

Display LPH7508-serdisplib {
    Driver 'serdisplib'
    Port 'PAR:/dev/parports/0'
    Model 'LPH7508'
}

Display XWindow {
    Driver 'X11'
    Size   '120x32'
    Font   '5x8'
    Pixel  '4+1'
    Gap    '-1x-1'
    Border 20
#   Foreground '#000000'
#   Background '#80d000'
#   Halfground '#70c000'
    Foreground '000000cc'
    Background '00000022'
    Basecolor  '80d000'
}

Display Image {
    Driver 'Image'
#   Format 'PPM'
    Format 'PNG'
    Size   '120x32'
    Font   '6x8'
    Pixel  '4+1'
    Gap    '-1x-1'
    Border 20
#   Foreground '#000000'
#   Background '#80d000'
#   Halfground '#70c000'
    Foreground '000000cc'
    Background '00000022'
    Basecolor  '80d000'
}

Plugin Seti {
    Directory '/root/setiathome-3.08.i686-pc-linux-gnu'
}


Plugin MySQL {
    server 'gsmlandia.com'	# if none, localhost assumed
    port 3306			# if none, MySQL default assumed
    user 'lcd4linux'		# if none, lcd4linux unix owner assumed
    password 'lcd4linux'	# if none, empty password assumed
    database 'lcd4linux'	# MUST be specified
}

Plugin Pop3 {
   server1 'localhost'
   port1 110
   user1 'michael'
   password1 'secret'
}








Widget OS {
    class 'Text'
    expression '*** '.uname('sysname').' '.uname('release').' ***'
    width 20
    align 'M'
    speed 100	
    update tick
}

Widget CPU {
    class  'Text'
    expression  uname('machine')
    prefix 'CPU '
    width  9
    align  'L'
    update tick
}


Widget CPUinfo {
    class  'Text'
    expression  cpuinfo('model name')
    prefix ''
    width  20
    align  'M'
    speed 100	
    update tick
}


Widget RAM {
    class  'Text'
    expression meminfo('MemTotal')/1024
    postfix ' MB RAM'	
    width  11
    precision 0
    align  'R'
    update tick
}

Widget Busy {
    class 'Text'
    expression proc_stat::cpu('busy', 500)
    prefix 'Busy'	
    postfix '%'	
    width 9	
    precision 1
    align 'R'	
    update tick	
}	

Widget BusyBar {
    class 'Bar'
    expression  proc_stat::cpu('busy',   500)
    expression2 proc_stat::cpu('system', 500)
    length 10	
    direction 'E'
    style 'H'
    update tack
}

Widget Load {
    class 'Text'
    expression loadavg(1)
    prefix 'Load'
    postfix loadavg(1)>1.0?'!':' '
    width 10
    precision 1
    align 'R'
    update tick
}

Widget LoadBar {
    class 'Bar'
    expression  loadavg(1)
    max 2.0
    length 10	
    direction 'E'
    update tack
}


Widget Disk {
    class 'Text'
    # disk.[rw]blk return blocks, we assume a blocksize of 512
    # to get the number in kB/s we would do blk*512/1024, which is blk/2 
    # expression (proc_stat::disk('.*', 'rblk', 500)+proc_stat::disk('.*', 'wblk', 500))/2
    # with kernel 2.6, disk_io disappeared from /proc/stat but moved to /proc/diskstat
    # therefore you have to use another function called 'diskstats':
    expression diskstats('hd.', 'read_sectors', 500) + diskstats('hd.', 'write_sectors', 500)
    prefix 'disk'
    postfix ' '
    width 10	
    precision 0
    align 'R'	
    update tick	
}	

Widget DiskBar {
    class 'Bar'
    #expression  proc_stat::disk('.*', 'rblk', 500)
    #expression2 proc_stat::disk('.*', 'wblk', 500)
    # for kernel 2.6:
    expression  diskstats('hd.', 'read_sectors',  500)
    expression2 diskstats('hd.', 'write_sectors', 500)
    length 14	
    direction 'E'
    update tack
}

Widget Eth0 {
    class 'Text'
    expression (netdev('eth0', 'Rx_bytes', 500)+netdev('eth0', 'Tx_bytes', 500))/1024
    prefix 'eth0'
    postfix ' '
    width 10	
    precision 0
    align 'R'	
    update tick	
}	

Widget Eth0Bar {
    class 'Bar'
    expression  netdev('eth0', 'Rx_bytes', 500)
    expression2 netdev('eth0', 'Tx_bytes', 500)
    length 14	
    direction 'E'
    update tack
}

Widget PPP {
    class 'Text'
    expression (ppp('Rx:0', 500)+ppp('Tx:0', 500))
    prefix 'PPP'
    width 9
    precision 0
    align 'R'
    update tick
}

Widget Temp {
    class 'Text'
    expression i2c_sensors('temp_input3')*1.0324-67
    prefix 'Temp'
    width 9
    precision 1
    align 'R'
    update tick
}

Widget TempBar {
    class 'Bar'
    expression  i2c_sensors('temp_input3')*1.0324-67
    min 40
    max 80
    length 10
    direction 'E'
    update tack
}

Widget MySQLtest1 {
    class 'Text'
    expression MySQL::query('SELECT id FROM table1')
    width 20
    align 'R'
    prefix 'MySQL test:'
    update minute
}

Widget MySQLtest2 {
    class 'Text'
    expression MySQL::status()
    width 20
    align 'M'
    prefix 'Status: '
    update minute
}

Widget Uptime {
    class 'Text'
    expression uptime('%d days %H:%M:%S')
    width 20
    align 'R'
    prefix 'Up '
    update 1000
}


# debugging widgets 

Widget BarTest {
    class 'Bar'
    # test::bar(barno,maxval,startval,delta) - move a test value between 0 and max.
    # delta= step to change value by each time it's read.
    # barno - ten different test bar values can be set up, with barno=0..9
    # if delta=0, just returns the value of bar n instead of changing it.
    expression test::bar(0,30,25,1)
    expression2 test::bar(1,30,0,1)
    length 8
    # max 50
    direction 'E'
    update 10
}

Widget BarTestVal {
    class 'Text'
    expression test::bar(0,100,50,0)
    prefix 'Test '
    width 9
    update 200
}

Widget LightningTest {
    class 'icon'
    speed 500
    visible test::onoff(0)
    bitmap {
        row1 '...***'
        row2 '..***.'
        row3 '.***..'
        row4 '.****.'
        row5 '..**..'
        row6 '.**...'
        row7 '**....'
        row8 '*.....'
    }
}


# Icons

Widget Heartbeat {
    class 'Icon'
    speed 800
    Bitmap {
	Row1 '.....|.....'
	Row2 '.*.*.|.*.*.'
	Row3 '*****|*.*.*'
	Row4 '*****|*...*'
	Row5 '.***.|.*.*.'
	Row6 '.***.|.*.*.'
	Row7 '..*..|..*..'
	Row8 '.....|.....'
    }
}

Widget EKG {
    class 'Icon'
    speed 50
    Bitmap {
	Row1 '.....|.....|.....|.....|.....|.....|.....|.....'
	Row2 '.....|....*|...*.|..*..|.*...|*....|.....|.....'
	Row3 '.....|....*|...*.|..*..|.*...|*....|.....|.....'
	Row4 '.....|....*|...**|..**.|.**..|**...|*....|.....'
	Row5 '.....|....*|...**|..**.|.**..|**...|*....|.....'
	Row6 '.....|....*|...*.|..*.*|.*.*.|*.*..|.*...|*....'
	Row7 '*****|*****|****.|***..|**..*|*..**|..***|.****'
	Row8 '.....|.....|.....|.....|.....|.....|.....|.....'
    }
}
Widget Karo {
    class 'Icon'
    speed 200
    Bitmap {
	Row1 '.....|.....|.....|.....|..*..|.....|.....|.....'
	Row2 '.....|.....|.....|..*..|.*.*.|..*..|.....|.....'
	Row3 '.....|.....|..*..|.*.*.|*...*|.*.*.|..*..|.....'
	Row4 '.....|..*..|.*.*.|*...*|.....|*...*|.*.*.|..*..'
	Row5 '.....|.....|..*..|.*.*.|*...*|.*.*.|..*..|.....'
	Row6 '.....|.....|.....|..*..|.*.*.|..*..|.....|.....'
	Row7 '.....|.....|.....|.....|..*..|.....|.....|.....'
	Row8 '.....|.....|.....|.....|.....|.....|.....|.....'
    }
}
Widget Heart {
    class 'Icon'
    speed 250
    Bitmap {
	Row1 '.....|.....|.....|.....|.....|.....'
	Row2 '.*.*.|.....|.*.*.|.....|.....|.....'
	Row3 '*****|.*.*.|*****|.*.*.|.*.*.|.*.*.'
	Row4 '*****|.***.|*****|.***.|.***.|.***.'
	Row5 '.***.|.***.|.***.|.***.|.***.|.***.'
	Row6 '.***.|..*..|.***.|..*..|..*..|..*..'
	Row7 '..*..|.....|..*..|.....|.....|.....'
	Row8 '.....|.....|.....|.....|.....|.....'
    }
}
Widget Blob {
    class 'Icon'
    speed 250
    Bitmap {
	Row1 '.....|.....|.....'
	Row2 '.....|.....|.***.'
	Row3 '.....|.***.|*...*'
	Row4 '..*..|.*.*.|*...*'
	Row5 '.....|.***.|*...*'
	Row6 '.....|.....|.***.'
	Row7 '.....|.....|.....'
	Row8 '.....|.....|.....'
    }
}
Widget Wave {
    class 'Icon'
    speed 100
    Bitmap {
	Row1 '..**.|.**..|**...|*....|.....|.....|.....|.....|....*|...**'
	Row2 '.*..*|*..*.|..*..|.*...|*....|.....|.....|....*|...*.|..*..'
	Row3 '*....|....*|...*.|..*..|.*...|*....|....*|...*.|..*..|.*...'
	Row4 '*....|....*|...*.|..*..|.*...|*....|....*|...*.|..*..|.*...'
	Row5 '*....|....*|...*.|..*..|.*...|*....|....*|...*.|..*..|.*...'
	Row6 '.....|.....|....*|...*.|..*..|.*..*|*..*.|..*..|.*...|*....'
	Row7 '.....|.....|.....|....*|...**|..**.|.**..|**...|*....|.....'
	Row8 '.....|.....|.....|.....|.....|.....|.....|.....|.....|.....'
    }
}
Widget Squirrel {
    class 'Icon'
    speed 100
    Bitmap {
	Row1 '.....|.....|.....|.....|.....|.....'
	Row2 '.....|.....|.....|.....|.....|.....'
	Row3 '.....|.....|.....|.....|.....|.....'
	Row4 '**...|.**..|..**.|...**|....*|.....'
	Row5 '*****|*****|*****|*****|*****|*****'
	Row6 '...**|..**.|.**..|**...|*....|.....'
	Row7 '.....|.....|.....|.....|.....|.....'
	Row8 '.....|.....|.....|.....|.....|.....'
    }
}

Widget Lightning {
    class 'icon'
    speed 100
    visible cpu('busy', 500)-50
    bitmap {
        row1 '...***'
        row2 '..***.'
        row3 '.***..'
        row4 '.****.'
        row5 '..**..'
        row6 '.**...'
        row7 '**....'
        row8 '*.....'
    }
}

Widget Rain {
    class 'icon'
    speed 200
    bitmap {
	row1 '...*.|.....|.....|.*...|....*|..*..|.....|*....'
	row2 '*....|...*.|.....|.....|.*...|....*|..*..|.....'
	row3 '.....|*....|...*.|.....|.....|.*...|....*|..*..'
	row4 '..*..|.....|*....|...*.|.....|.....|.*...|....*'
	row5 '....*|..*..|.....|*....|...*.|.....|.....|.*...'
	row6 '.*...|....*|..*..|.....|*....|...*.|.....|.....'
	row7 '.....|.*...|....*|..*..|.....|*....|...*.|.....'
	row8 '.....|.....|.*...|....*|..*..|.....|*....|...*.'
    }
}

Widget Test {
    class 'Text'
    expression '1234567890123456789012345678901234567890'
    width 40
    foreground 'ff0000ff'
}

Widget Test1 {
    class 'Text'
    expression 'ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890'
    width 20
    align 'M'
    speed 100
}

Widget Test2 {
    class 'Text'
    expression '1234567890abcdefghijklmnopqrstuvwxyz'
    width 20
    align 'M'
    speed 150
}

Widget GPO_Val1 {
    class 'Text'
    expression LCD::GPO(1)
    prefix 'GPO#1'
    width 10
    precision 0
    align 'R'
    update tick
}

Widget GPI_Val1 {
    class 'Text'
    expression LCD::GPI(1)
    prefix 'GPI#1'
    width 10
    precision 0
    align 'R'
    update tick
}

Widget GPO_Val4 {
    class 'Text'
    expression LCD::GPO(4)
    prefix 'GPO#4'
    width 10
    precision 0
    align 'R'
    update tick
}

Widget GPO_Test1 {
    class 'GPO'
    expression 255*test::onoff(1)
    update 300
}

Widget GPO_Test255 {
    class 'GPO'
    expression test::bar(0,255, 0, 1)
    update 100
}

Widget ImageTest {
    class 'Image'
    file 'Michi.png'
    update 1000
    visible 1
}













Layout Default {
    Row1 {
	Col1  'OS'
    }
    Row2 {
	Col1  'CPU'
	Col10 'RAM'
    }
    Row3 {
	Col1  'Busy'
	Col10 'Rain'
	Col11 'BusyBar'
    }
    Row4 {
	Col1 'Load'
	Col11 'LoadBar'
    }
    Row5 {
	Col1  'Disk'
	Col11 'DiskBar'
    }
    Row6 {
	Col1  'Eth0'
	Col11 'Eth0Bar'
    }
}

Layout TestLayer {
    Row1 {
	Col1  'OS'
    }
    Row2 {
	Col1  'CPU'
	Col10 'RAM'
    }
    Row3 {
	Col1  'Busy'
	Col10 'Rain'
	Col11 'BusyBar'
    }
    Row4 {
	Col1 'Load'
	Col11 'LoadBar'
    }
    Row5 {
	Col1  'Disk'
	Col11 'DiskBar'
    }
    Row6 {
	Col1  'Eth0'
	Col11 'Eth0Bar'
    }
    Layer 2 {
	X1.Y1 'ImageTest'
    }
}

Layout TestImage {
    Row4 {
	Col1  'OS'
    }
    Row2 {
	Col1  'CPU'
	Col10 'RAM'
    }
    Layer 2 {
	X1.Y1 'ImageTest'
    }
}

Layout L24x8 {
    Row1 {
	Col1  'Load'
	Col11 'BusyBar'
    }
    Row2 {
    }
}

Layout L8x2 {
    Row1 {
	Col1  'Busy'
    }
    Row2 {
	Col1 'BarTest'
    }
}

Layout L16x1 {
    Row1 {
	Col1  'Busy'
	Col11 'BusyBar'
    }
}

Layout L16x2 {
    Row1 {
	Col1  'Busy'
	Col11 'BusyBar'
    }
    Row2 {
	Col1  'Disk'
	#Col11 'DiskBar'
	Col11 'BarTest'
    }
}

Layout L20x2 {
    Row1 {
        Col1  'CPUinfo'
    }
    Row2 {
	Col1  'Busy'
	Col11 'BusyBar'
    }
}

Layout L40x2 {
    Row1 {
	Col1  'OS'
	Col21  'Busy'
	Col31 'BusyBar'
    }
    Row2 {
	Col1  'CPU'
	Col10 'RAM'
	Col21 'Load'
	Col31 'LoadBar'
    }
}

Layout Test {
    Row01.Col1 'Test1'
    Row02.Col1 'Test1'
    Row03.Col1 'Test1'
    Row04.Col1 'Test1'
    Row05.Col1 'Test1'
    Row06.Col1 'Test1'
    Row07.Col1 'Test1'
    Row08.Col1 'Test1'
    Row09.Col1 'Test1'
    Row10.Col1 'Test1'
    Row11.Col1 'Test1'
    Row12.Col1 'Test1'
    Row13.Col1 'Test1'
    Row14.Col1 'Test1'
    Row15.Col1 'Test1'
    Row16.Col1 'Test1'
}

Layout Test2 {
    Row01.Col1 'Test1'
    #Row02.Col1 'Rain'
    Row02.Col1 'Test2'
    Row03.Col1 'Test1'
    Row04.Col1 'Test2'
    Row05.Col1 'Test1'
    Row06.Col1 'Test2'
    Row07.Col1 'Test1'
    Row08.Col1 'Test2'
}

Layout TestGPO {
    Row1.Col1  'GPO_Val1'
    Row1.Col10 'GPI_Val1'
    Row2.Col1  'GPO_Val4'
    GPO1       'GPO_Test255'
    GPO4       'GPO_Test1'
}

Layout testMySQL {
	Row1 {
		Col1 'MySQLtest1'
	}
	Row2 {
		Col1 'MySQLtest2'
	}
}


Display 'HD44780-20x4'
#Display 'SerDispLib'
#Display 'LCD-Linux'
#Display 'LCD2041'
#Display 'LK202'
#Display 'LK204'
#Display 'MI240'
#Display 'CW12232'
#Display 'HD44780-generic'
#Display 'HD44780-WinAmp'
#Display 'WDC2704M'
#Display 'SC1602D'
#Display 'LCM-162'
#Display 'CF631'
#Display 'CF632'
#Display 'CF633'
#Display 'Curses'
#Display 'M50530-24x8'
#Display 'LCDTerm'
#Display 'SimpleLCD'
#Display 'BA63'
#Display 'CT20x4'
#Display 'T6963-240x64'
#Display 'XWindow'
#Display 'USBLCD'
#Display 'BWCT'
#Display 'Image'
#Display 'Trefon'
#Display 'LCD2USB'
#Display 'LPH7508-serdisplib'
#Display 'LPH7508'

Layout 'Default'
#Layout 'TestLayer'
#Layout 'TestImage'
#Layout 'L8x2'
#Layout 'L16x1'
#Layout 'L16x2'
#Layout 'L20x2'
#Layout 'L40x2'
#Layout 'Test'
#Layout 'Test2'
#Layout 'TestGPO'

die lcd4linux.conf ist noch nicht "bearbeitet" d.h. das ist jetzt standart, aber so funktioniert sie. 8) :mrgreen:

Vielen Dank nochmal an stka und grothesk die mir sehr geholfen haben.
 
OP
P

Psycho Mantis

Hi,

Ich wollte heute ein widget schreiben, aber die "zeilen" sind um 4 stellen verschoben:
Wenn ich z.b. "012345678901234567890" anzeigen lasse zeigt er nur "5678901234567890" an.

Aber bei denn widgets die bereits fertig drin waren funktionieren z.b. default.
Jetzt frage ich mich Warum feheln 4 stellen ?
Ich benutze die Klammer: { } ,weil es mit [ ] nicht geht.

Wenn ich mein selber geschriebenes widget starte bring er folgende meldung:

HD44780: too many busy flag failures, turning off busy flag checking.
Was heist das ? Wie kann ich es ändern ?

Ich benutze kate zum Bearbeiten der conf
 
D

dustimausi

Hallo, super!

Mit deiner Config tat mein Display auf Anhieb, nachdem ich vorher ewig rumgesucht und probiert habe.

Gruss
David
 
OP
P

Psycho Mantis

Hi,

Super,

Aber leider funktioniert mein LCD4Linux nicht richtig. d.h. die erste und die zweite zeile funktioniren bei manchen sachen nicht richtig: Zeilen vertauscht, buchstaben versetzt, animation überschneiden sich (lauftext)

Ist das bei dir auch so ?
Allso die 3 und 4 Zeile Funktionieren immer aber die erste und zweite nicht so richtig. Ich habe alles ausprobiert und weiss nicht woran es liegt.
Ich muss mal die neue version von LCD4Linux ausprobieren.

Mal sehen ob es dann geht 8)
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben