• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Gelöst nvme Bootet nicht mehr

O

oparilames

Guten Tag zusammen.
Ich habe hier einen PC der bis vor kurzem problemlos funktioniert hat.
Jetzt bootet er nicht mehr und ich bin mir unsicher warum.
Ich wusste nicht so recht, wo ein solches Problem gepostet werden sollte, da es kein Installationsproblem per se ist und evtl. auf einen Hardwaredefekt zurückzuführen ist. Falls »Systemverwaltung, Administration und Konfiguration« besser passen sollte, darf der Thread natürlich dorthin verschoben werden.

Zuerst hatte ich nur ein Problem mit Cinnamon, dass das Menü leer war. Ich hatte zuvor auch an Cinnamon-Konfigurationsdateien und dem Screensaver-Python-Script gebastelt, daher war ich nicht zu sehr überrascht. Durch diesen Post konnte ich es lösen.
Allerdings wollte ich dann Cinnamon neu starten, weil ich Fenster zwar minimieren konnte, dies aber nicht sichtbar gemacht wurde ich sich so der PC nicht wirklich bedienen ließ. Ich musste/wollte über REISUB beenden, kam aber nicht an alle Tasten ran und habe dann über den Aussschalter gemacht.
Jedenfalls bootet er seitdem nicht mehr.
Distribution: Void Linux
Kernel: müsste Linux 6.12.7_1 sein.
Code: 
# blkid
/dev/nvme0n1p1: LABEL="gaming-and-media" UUID="05f1cee3-1ec1-450a-9797-c21b09b51848" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="Gaming and Media" PARTUUID="5a30bc78-2afd-44aa-a17f-8449422ec617"
/dev/nvme1n1p4: PARTUUID="06208cee-4c94-4a8c-9097-fa38a360220b"
/dev/nvme1n1p2: LABEL="OS-partition" UUID="353497b7-e757-45c7-a16c-260c81813672" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="OS-Partition" PARTUUID="74b653c4-9bb1-439b-b2ce-d80a3d9ccf09"
/dev/nvme1n1p3: LABEL="home-partition" UUID="89ec58d2-36ea-448d-9b54-e586c7c97340" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="home-Partition" PARTUUID="10ec7064-cbe4-4766-95e7-ecc79eb928ef"
/dev/nvme1n1p1: LABEL_FATBOOT="EFI-PART" LABEL="EFI-PART" UUID="0473-B63A" BLOCK_SIZE="512" TYPE="vfat" PARTLABEL="EFI-Partition" PARTUUID="5b78c5cd-9b41-48bd-92d6-9283631b4235"
Ich erhalte beim Boot den Fehler im Anhang.
Auszugweise aus der rdsosreport.txt:
Code: 
+ dmesg
+ sed -e s/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g
[    0.000000] Linux version 6.12.7_1 (voidlinux@voidlinux) (gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41) #1 SMP PREEMPT_DYNAMIC Sat Dec 28 21:32:24 UTC 2024
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.7_1 root=UUID=353497b7-e757-45c7-a16c-260c81813672 ro usbcore.autosuspend=-1 usbcore.autosuspend=-1 loglevel=4
[    0.000000] BIOS-provided physical RAM map:
...
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] e820: update [mem 0xa6625018-0xa6640657] usable ==> usable
[    0.000000] e820: update [mem 0xa661a018-0xa6624e57] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009e01fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000009e02000-0x0000000009ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000000a210000-0x000000000affffff] usable
[    0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b020fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000b021000-0x00000000a661a017] usable
[    0.000000] reserve setup_data: [mem 0x00000000a661a018-0x00000000a6624e57] usable
[    0.000000] reserve setup_data: [mem 0x00000000a6624e58-0x00000000a6625017] usable
[    0.000000] reserve setup_data: [mem 0x00000000a6625018-0x00000000a6640657] usable
[    0.000000] reserve setup_data: [mem 0x00000000a6640658-0x00000000ac7f0fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000ac7f1000-0x00000000b27f0fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b27f1000-0x00000000b28f5fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000b28f6000-0x00000000b48f5fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000b48f6000-0x00000000ba5fefff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ba5ff000-0x00000000bbff8fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bbff9000-0x00000000bbffdfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bbffe000-0x00000000bbffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bc000000-0x00000000bcffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bd7f3000-0x00000000bfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f7000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000101defffff] usable
[    0.000000] reserve setup_data: [mem 0x000000101ef40000-0x00000010601fffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] efi: EFI v2.9 by American Megatrends
...
[    2.483264] Monitor-Mwait will be used to enter C-1 state
[    2.485224] Estimated ratio of average max frequency by base frequency (times 1024): 1127
[    2.485331] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.508200] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.512320] nvme 0000:04:00.0: platform quirk: setting simple suspend
[    2.512388] nvme nvme0: pci function 0000:04:00.0
[    2.512450] nvme nvme1: pci function 0000:12:00.0
[    2.512452] e1000e: Intel(R) PRO/1000 Network Driver
[    2.512454] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.512526] i8042: PNP: No PS/2 controller found.
[    2.512673] mousedev: PS/2 mouse device common for all mice
...
[    4.516093] usb 1-3: Product: USB2.1 Hub
[    4.516094] usb 1-3: Manufacturer: Generic
[    4.524262] hub 1-3:1.0: USB hub found
[    4.527028] hub 1-3:1.0: 5 ports detected
[    4.531381] ata4: SATA link down (SStatus 0 SControl 300)
[    4.565327] EXT4-fs (nvme1n1p2): INFO: recovery required on readonly filesystem
[    4.565329] EXT4-fs (nvme1n1p2): write access will be enabled during recovery
[    4.581492] EXT4-fs (nvme1n1p2): recovery complete
[    4.581496] EXT4-fs error (device nvme1n1p2): ext4_mark_recovery_complete:6236: comm mount: Orphan file not empty on read-only fs.
[    4.581892] EXT4-fs (nvme1n1p2): mount failed
[    4.584039] dracut Warning: Failed to mount -t ext4 -o ro,ro /dev/disk/by-uuid/353497b7-e757-45c7-a16c-260c81813672 /sysroot
[    4.584071] dracut Warning: *** An error occurred during the file system check.
[    4.584094] dracut Warning: *** Dropping you to a shell; the system will try
[    4.584116] dracut Warning: *** to mount the filesystem(s), when you leave the shell.
[    4.584160] dracut Warning:
[    4.727545] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[    4.977061] usb 1-5: New USB device found, idVendor=174c, idProduct=2074, bcdDevice= 0.01
[    4.977065] usb 1-5: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[    4.977068] usb 1-5: Product: ASM107x
[    4.977070] usb 1-5: Manufacturer: Asmedia
[    4.988373] hub 1-5:1.0: USB hub found
[    4.993052] hub 1-5:1.0: 4 ports detected
[    5.032542] usb 1-3.4: new full-speed USB device number 5 using xhci_hcd
[    5.337045] usb 1-3.4: New USB device found, idVendor=24ae, idProduct=2002, bcdDevice=10.01
[    5.337050] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.337052] usb 1-3.4: Product: RAPOO 5G Wireless Device
[    5.337054] usb 1-3.4: Manufacturer: RAPOO
[    5.390527] usb 1-6: new full-speed USB device number 6 using xhci_hcd
[    5.676833] usb 1-6: New USB device found, idVendor=0db0, idProduct=0076, bcdDevice= 0.01
[    5.676836] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.676838] usb 1-6: Product: MYSTIC LIGHT
[    5.676839] usb 1-6: Manufacturer: MSI
...
[    5.870297] [drm] Detected VRAM RAM=16368M, BAR=16384M
[    5.870298] [drm] RAM width 256bits GDDR6
[    5.870383] [drm] amdgpu: 16368M of VRAM memory ready
[    5.870385] [drm] amdgpu: 31740M of GTT memory ready.
[    5.870396] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    5.870446] [drm] PCIE GART of 512M enabled (table at 0x00000083FEB00000).
[    5.870856] [drm] Loading DMUB firmware via PSP: version=0x07002A00
[    5.871014] [drm] Found VCN firmware Version ENC: 1.22 DEC: 9 VEP: 0 Revision: 12
[    5.949659] amdgpu 0000:03:00.0: amdgpu: reserve 0xa700000 from 0x83e0000000 for PSP TMR
[    6.085072] usb 1-7: New USB device found, idVendor=0e8d, idProduct=0616, bcdDevice= 1.00
[    6.085076] usb 1-7: New USB device strings: Mfr=5, Product=6, SerialNumber=7
[    6.085079] usb 1-7: Product: Wireless_Device
[    6.085081] usb 1-7: Manufacturer: MediaTek Inc.
[    6.085082] usb 1-7: SerialNumber: 000000000
[    6.139727] hid: raw HID events driver (C) Jiri Kosina
[    6.193384] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
[    6.193387] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[    6.193414] amdgpu 0000:03:00.0: amdgpu: smu driver if version = 0x0000003d, smu fw if version = 0x00000040, smu fw program = 0, smu fw version = 0x00505300 (80.83.0)
[    6.193417] amdgpu 0000:03:00.0: amdgpu: SMU driver if version not matched
+ [ -f /run/initramfs/init.log ]
Hilfe wäre sehr nett. Ich habe keine weiteren Rettungsversuche unternommen.
 

Anhänge

  • fs.jpg
    fs.jpg
    230,9 KB · Aufrufe: 6
J

josef-wien

Auszüge aus einer Log-Datei helfen nicht, aber das ist hier nicht wichtig. Laut dem Bild ist die Systempartition nicht in Ordnung. Führe
Code: 
e2fsck -f /dev/nvme1n1p2
aus. Falls eine Reparatur nicht möglich ist, könnte die Ausgabe des Befehls weiterhelfen.
 
susejunky

susejunky

Moderator
Teammitglied
@oparilames :
Herzlich willkommen im Linux-Club-Forum.

oparilames schrieb:
Ich erhalte beim Boot den Fehler im Anhang.
Zum Vergrößern anklicken....
oparilames schrieb:
Auszugweise aus der rdsosreport.txt:
Code: 
+ dmesg
+ sed -e s/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g
[ 0.000000] Linux version 6.12.7_1 (voidlinux@voidlinux) (gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41) #1 SMP PREEMPT_DYNAMIC Sat Dec 28 21:32:24 UTC 2024
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.7_1 root=UUID=353497b7-e757-45c7-a16c-260c81813672 ro usbcore.autosuspend=-1 usbcore.autosuspend=-1 loglevel=4

[ 4.565327] EXT4-fs (nvme1n1p2): INFO: recovery required on readonly filesystem
[ 4.565329] EXT4-fs (nvme1n1p2): write access will be enabled during recovery
[ 4.581492] EXT4-fs (nvme1n1p2): recovery complete
[ 4.581496] EXT4-fs error (device nvme1n1p2): ext4_mark_recovery_complete:6236: comm mount: Orphan file not empty on read-only fs.
[ 4.581892] EXT4-fs (nvme1n1p2): mount failed
[ 4.584039] dracut Warning: Failed to mount -t ext4 -o ro,ro /dev/disk/by-uuid/353497b7-e757-45c7-a16c-260c81813672 /sysroot
[ 4.584071] dracut Warning: *** An error occurred during the file system check.
[ 4.584094] dracut Warning: *** Dropping you to a shell; the system will try
[ 4.584116] dracut Warning: *** to mount the filesystem(s), when you leave the shell.
[ 4.584160] dracut Warning:
...
+ [ -f /run/initramfs/init.log ]
H
Zum Vergrößern anklicken....
Wie @josef-wien bereits sagte: Überprüfe das Dateisystem.
 
OP
O

oparilames

Okay das scheint geklappt zu haben.
Vielen dank.
Hast du irgendwelche Tipps, wie ich nahe Hardwaredefekts für SSDs (frühzeitig) erkennen kann?
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben