Hallo zusammen,
ich habe mittels YAST XEN und den XEN-kernel installiert. Beim Booten des XEN-kernels hängt sich der PC jedoch auf.
Nach dem eine ganze Reihe normal aussehende Boot messages abgelaufen sind wird der Schirm schwarz und es wird nur noch eine Zeile angezeigt:
Starting AVAHI daemon done
Dann habe ich versuchshalber diesen daemon disabled und dann bleibts das ganze beim cron daemon hängen.
Ich habe eine Intel Core 2 Quad Q6600 2,4 GHz Rechner. 4GB RAM
Meine Grub menu list:
# Modified by YaST2. Last modification on Fri Mar 28 22:14:57 CET 2008
default 1
timeout 8
gfxmenu (hd0,5)/boot/message
###Don't change this comment - YaST2 identifier: Original name: xen###
title XEN -- openSUSE 10.3 - 2.6.22.17-0.1
root (hd0,5)
kernel /boot/xen.gz dom0_mem=2048M
module /boot/vmlinuz-2.6.22.17-0.1-xen root=/dev/sda6 vga=normal resume=/dev/sda5 splash=silent showopts
module /boot/initrd-2.6.22.17-0.1-xen
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.3 - 2.6.22.17-0.1
root (hd0,5)
kernel /boot/vmlinuz-2.6.22.17-0.1-default root=/dev/sda6 vga=0x317 resume=/dev/sda5 splash=silent showopts
initrd /boot/initrd-2.6.22.17-0.1-default
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.3 - 2.6.22.17-0.1
root (hd0,5)
kernel /boot/vmlinuz-2.6.22.17-0.1-default root=/dev/sda6 vga=normal showopts ide=nodma apm=off acpi=off noresume edd=off 3
initrd /boot/initrd-2.6.22.17-0.1-default
###Don't change this comment - YaST2 identifier: Original name: windows###
title Windows
rootnoverify (hd0,5)
chainloader (hd0,0)+1
###Don't change this comment - YaST2 identifier: Original name: floppy###
title Floppy
rootnoverify (hd0,5)
chainloader (fd0)+1
Hier sind die ganzen Boot messages .... die letzten Zeilen kommen zustande durch das Herunterfahren nach Alt-Strg-Entf
Inspecting /boot/System.map-2.6.22.17-0.1-xen
Loaded 25259 symbols from /boot/System.map-2.6.22.17-0.1-xen.
Symbols match kernel version 2.6.22.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.22.17-0.1-xen (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/10 20:01:04 UTC
<6>Command line: root=/dev/sda6 vga=normal resume=/dev/sda5 splash=silent
<6>BIOS-provided physical RAM map:
<4> Xen: 0000000000000000 - 0000000080800000 (usable)
<7>Entering add_active_range(0, 0, 526336) 0 entries of 256 used
<4>end_pfn_map = 526336
<6>DMI 2.5 present.
<7>Entering add_active_range(0, 0, 526336) 0 entries of 256 used
<4>Zone PFN ranges:
<4> DMA 0 -> 526336
<4> DMA32 526336 -> 526336
<4> Normal 526336 -> 526336
<4>early_node_map[1] active PFN ranges
<4> 0: 0 -> 526336
<7>On node 0 totalpages: 526336
<7> DMA zone: 7196 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 519140 pages, LIFO batch:31
<7> DMA32 zone: 0 pages used for memmap
<7> Normal zone: 0 pages used for memmap
<4>ACPI: RSDP 000F8010, 0014 (r0 MEDION)
<4>ACPI: RSDT CFEE3000, 003C (r1 MEDION MEDIONAG 42302E31 AWRD 0)
<4>ACPI: FACP CFEE3080, 0074 (r1 MEDION MEDIONAG 42302E31 AWRD 0)
<4>ACPI: DSDT CFEE3100, 475A (r1 MEDION AWRDACPI 1000 MSFT 3000000)
<4>ACPI: FACS CFE90000, 0040
<4>ACPI: HPET CFEE7AC0, 0038 (r1 MEDION MEDIONAG 42302E31 AWRD 98)
<4>ACPI: MCFG CFEE7B00, 003C (r1 MEDION MEDIONAG 42302E31 AWRD 0)
<4>ACPI: SLIC CFEE7880, 0176 (r1 MEDION MEDIONAG 42302E31 AWRD 0)
<4>ACPI: APIC CFEE7A00, 0084 (r1 MEDION MEDIONAG 42302E31 AWRD 0)
<4>ACPI: SSDT CFEE8460, 0380 (r1 PmRef CpuPm 3000 INTL 20041203)
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
<6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
<6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<6>Setting APIC routing to xen
<6>Using ACPI (MADT) for SMP configuration information
<6>Allocating PCI resources starting at d0000000 (gap: cff00000:10100000)
<6>PERCPU: Allocating 24952 bytes of per cpu data
<4>Built 1 zonelists. Total pages: 519140
<5>Kernel command line: root=/dev/sda6 vga=normal resume=/dev/sda5 splash=silent
<6>bootsplash: silent mode.
<4>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 32768 bytes)
<6>Xen reported: 2392.556 MHz processor.
<4>Console: colour VGA+ 80x50
<4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
<4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
<6>Software IO TLB enabled:
<4> Aperture: 64 megabytes
<4> Kernel range: ffff8800037e6000 - ffff8800077e6000
<4> Address size: 27 bits
<6>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<4>Memory: 1975808k/2105344k available (2007k kernel code, 120616k reserved, 918k data, 188k init)
<4>Calibrating delay using timer specific routine.. 4787.06 BogoMIPS (lpj=9574138)
<6>Security Framework v1.0.0 initialized
<4>Mount-cache hash table entries: 256
<6>CPU: L1 I cache: 32K, L1 D cache: 32K
<6>CPU: L2 cache: 4096K
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 0
<6>SMP alternatives: switching to UP code
<6>Unpacking initramfs... done
<6>Freeing initrd memory: 9911k freed
<6>ACPI: Core revision 20070126
<4>Parsing all Control Methods:
<4>Table [DSDT](id 0001) - 663 Objects with 61 Devices 179 Methods 37 Regions
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0002) - 27 Objects with 0 Devices 4 Methods 0 Regions
<4> tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
<4>evxfevnt-0091 [00] enable : Transition to ACPI mode successful
<6>SMP alternatives: switching to SMP code
<4>Initializing CPU#1
<4>Initializing CPU#2
<6>Brought up 4 CPUs
<4>Initializing CPU#3
<4>migration_cost=3338
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: Using MMCONFIG at e0000000 - efffffff
<4>evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 3F [_GPE] 8 regs on int 0x9
<4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 10 Wake, Enabled 2 Runtime GPEs in this block
<7>ACPI: EC: Look up EC in DSDT
<4>Completing Region/Field/Buffer/Package initialization:.....................................................................................
<4>Initialized 33/37 Regions 9/9 Fields 19/19 Buffers 24/24 Packages (699 nodes)
<4>Initializing Device/Processor/Thermal objects by executing _INI methods:..
<4>Executed 2 _INI methods requiring 1 _STA executions (examined 68 objects)
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: Probing PCI hardware (bus 00)
<4>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
<4>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
<6>PCI: Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 *7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 14 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>xen_mem: Initialising balloon driver.
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<4>ACPI: RTC can wake from S4
<6>pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved
<6>pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
<6>pnp: 00:0d: iomem range 0xf0000-0xfffff could not be reserved
<6>pnp: 00:0d: iomem range 0xcff00000-0xcfffffff has been reserved
<6>pnp: 00:0d: iomem range 0xfed00000-0xfed000ff could not be reserved
<6>pnp: 00:0d: iomem range 0xcfe90000-0xcfefffff could not be reserved
<6>PCI: Bridge: 0000:00:01.0
<6>Time: xen clocksource has been installed.
<6> IO window: d000-dfff
<6> MEM window: f8000000-fbffffff
<6> PREFETCH window: d0000000-dfffffff
<6>PCI: Bridge: 0000:00:1c.0
<6> IO window: c000-cfff
<6> MEM window: fde00000-fdefffff
<6> PREFETCH window: fdb00000-fdbfffff
<6>PCI: Bridge: 0000:00:1c.4
<6> IO window: b000-bfff
<6> MEM window: fda00000-fdafffff
<6> PREFETCH window: fd900000-fd9fffff
<6>PCI: Bridge: 0000:00:1e.0
<6> IO window: a000-afff
<6> MEM window: fdd00000-fddfffff
<6> PREFETCH window: fdc00000-fdcfffff
<6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<6>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
<4>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>audit: initializing netlink socket (disabled)
<5>audit(1206743471.708:1): initialized
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>Boot video device is 0000:01:00.0
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:01.0
cie00]
<7>Allocate Port Service[0000:00:01.0cie03]
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.0cie00]
<7>Allocate Port Service[0000:00:1c.0cie02]
<7>Allocate Port Service[0000:00:1c.0cie03]
<7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.4cie00]
<7>Allocate Port Service[0000:00:1c.4cie02]
<7>Allocate Port Service[0000:00:1c.4cie03]
<6>Real Time Clock Driver v1.12ac
<4>hpet_acpi_add: no address or irqs in _CRS
<6>Non-volatile memory driver v1.2
<4>Event-channel device installed.
<6>PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>mice: PS/2 mouse device common for all mice
<6>input: AT Translated Set 2 keyboard as /class/input/input0
<6>input: PC Speaker as /class/input/input1
<6>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
<6>NET: Registered protocol family 1
<6>Freeing unused kernel memory: 188k freed
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>USB Universal Host Controller Interface driver v3.0
<6>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:1a.0 to 64
<6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
<6>usb usb1: new device found, idVendor=0000, idProduct=0000
<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: UHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.22.17-0.1-xen uhci_hcd
<6>usb usb1: SerialNumber: 0000:00:1a.0
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 21
<7>PCI: Setting latency timer of device 0000:00:1a.1 to 64
<6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
<6>usb usb2: new device found, idVendor=0000, idProduct=0000
<6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.22.17-0.1-xen uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:1a.1
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
<6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
<7>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
<6>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000
<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb3: new device found, idVendor=0000, idProduct=0000
<6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: EHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.22.17-0.1-xen ehci_hcd
<6>usb usb3: SerialNumber: 0000:00:1a.7
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 6 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
<7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
<6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000
<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb4: new device found, idVendor=0000, idProduct=0000
<6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: EHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.22.17-0.1-xen ehci_hcd
<6>usb usb4: SerialNumber: 0000:00:1d.7
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 6 ports detected
<6>ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19
<7>PCI: Setting latency timer of device 0000:00:1a.2 to 64
<6>uhci_hcd 0000:00:1a.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
<6>uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
<6>usb usb5: new device found, idVendor=0000, idProduct=0000
<6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb5: Product: UHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.22.17-0.1-xen uhci_hcd
<6>usb usb5: SerialNumber: 0000:00:1a.2
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
<6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
<6>usb usb6: new device found, idVendor=0000, idProduct=0000
<6>usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb6: Product: UHCI Host Controller
<6>usb usb6: Manufacturer: Linux 2.6.22.17-0.1-xen uhci_hcd
<6>usb usb6: SerialNumber: 0000:00:1d.0
<6>usb usb6: configuration #1 chosen from 1 choice
<6>hub 6-0:1.0: USB hub found
<6>hub 6-0:1.0: 2 ports detected
<6>usb 3-4: new high speed USB device using ehci_hcd and address 2
<6>ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
<6>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
<6>usb usb7: new device found, idVendor=0000, idProduct=0000
<6>usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb7: Product: UHCI Host Controller
<6>usb usb7: Manufacturer: Linux 2.6.22.17-0.1-xen uhci_hcd
<6>usb usb7: SerialNumber: 0000:00:1d.1
<6>usb usb7: configuration #1 chosen from 1 choice
<6>hub 7-0:1.0: USB hub found
<6>hub 7-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
<6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
<6>usb usb8: new device found, idVendor=0000, idProduct=0000
<6>usb usb8: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb8: Product: UHCI Host Controller
<6>usb usb8: Manufacturer: Linux 2.6.22.17-0.1-xen uhci_hcd
<6>usb usb8: SerialNumber: 0000:00:1d.2
<6>usb usb8: configuration #1 chosen from 1 choice
<6>hub 8-0:1.0: USB hub found
<6>hub 8-0:1.0: 2 ports detected
<6>usb 3-4: new device found, idVendor=0424, idProduct=2228
<6>usb 3-4: new device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 3-4: Product: Flash Card Reader
<6>usb 3-4: Manufacturer: Generic
<6>usb 3-4: SerialNumber: 000022272228
<6>usb 3-4: configuration #1 chosen from 1 choice
<7>ahci 0000:00:1f.2: version 3.0
<6>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
<6>usb 7-1: new full speed USB device using uhci_hcd and address 2
<6>usb 7-1: new device found, idVendor=03f0, idProduct=0904
<6>usb 7-1: new device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 7-1: Product: DeskJet 845C
<6>usb 7-1: Manufacturer: Hewlett-Packard
<6>usb 7-1: SerialNumber: TH24O251DW3J
<6>usb 7-1: configuration #1 chosen from 1 choice
<6>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
<6>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part
<7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
<6>scsi0 : ahci
<6>scsi1 : ahci
<6>scsi2 : ahci
<6>scsi3 : ahci
<6>scsi4 : ahci
<6>scsi5 : ahci
<6>ata1: SATA max UDMA/133 cmd 0xffffc20000024100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
<6>ata2: SATA max UDMA/133 cmd 0xffffc20000024180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
<6>ata3: SATA max UDMA/133 cmd 0xffffc20000024200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
<6>ata4: SATA max UDMA/133 cmd 0xffffc20000024280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
<6>ata5: SATA max UDMA/133 cmd 0xffffc20000024300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
<6>ata6: SATA max UDMA/133 cmd 0xffffc20000024380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
<6>ata1: SATA link down (SStatus 0 SControl 300)
<6>ata2: SATA link down (SStatus 0 SControl 300)
<6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>ata3.00: ATA-8: ST3500320AS, SD15, max UDMA/133
<6>ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
<6>ata3.00: configured for UDMA/133
<6>ata4: SATA link down (SStatus 0 SControl 300)
<6>ata5: SATA link down (SStatus 0 SControl 300)
<6>ata6: SATA link down (SStatus 0 SControl 300)
<5>scsi 2:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
<5>sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
<5>sd 2:0:0:0: [sda] Write Protect is off
<7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
<5>sd 2:0:0:0: [sda] Write Protect is off
<7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
<5>sd 2:0:0:0: [sda] Attached SCSI disk
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda6, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<5>sd 2:0:0:0: Attached scsi generic sg0 type 0
<6>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
<4>rtc_cmos: probe of 00:04 failed with error -16
<6>input: Power Button (FF) as /class/input/input3
<6>ACPI: Power Button (FF) [PWRF]
<6>input: Power Button (CM) as /class/input/input4
<6>ACPI: Power Button (CM) [PWRB]
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>Linux agpgart interface v0.102 (c) Dave Jones
<4>ACPI: SSDT CFEE7B80, 022A (r1 PmRef Cpu0Ist 3000 INTL 20041203)
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0088) - 5 Objects with 0 Devices 3 Methods 0 Regions
<4>ACPI: SSDT CFEE8040, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20041203)
<4>Parsing all Control Methods:
<4>Table [SSDT](id 008A) - 3 Objects with 0 Devices 3 Methods 0 Regions
<4>ACPI: SSDT CFEE81A0, 0152 (r1 PmRef Cpu2Ist 3000 INTL 20041203)
<4>Parsing all Control Methods:
<4>Table [SSDT](id 008C) - 3 Objects with 0 Devices 3 Methods 0 Regions
<4>ACPI: SSDT CFEE8300, 0152 (r1 PmRef Cpu3Ist 3000 INTL 20041203)
<4>Parsing all Control Methods:
<4>Table [SSDT](id 008E) - 3 Objects with 0 Devices 3 Methods 0 Regions
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
<6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:03:00.0 to 64
<6>scsi6 : pata_marvell
<6>00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>scsi7 : pata_marvell
<6>ata7: PATA max UDMA/100 cmd 0x000000000001bf00 ctl 0x000000000001be02 bmdma 0x000000000001bb00 irq 16
<6>ata8: PATA max UDMA/133 cmd 0x000000000001bd00 ctl 0x000000000001bc02 bmdma 0x000000000001bb08 irq 16
<4>BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00
<6>ACPI: Thermal Zone [THRM] (22 C)
<6>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904
<6>usbcore: registered new interface driver usblp
<6>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
<6>Initializing USB Mass Storage driver...
<6>scsi8 : SCSI emulation for USB Mass Storage devices
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<6>ACPI: Fan [FAN] (on)
<6>Linux video capture interface: v2.00
<6>Intel(R) PRO/1000 Network Driver - version 7.6.5-NAPI
<6>Copyright (c) 1999-2007 Intel Corporation.
<6>saa7130/34: v4l2 driver version 0.2.14 loaded
<6>ata7.00: ATA-7: Maxtor 6E040L0, NAR61EA0, max UDMA/133
<6>ata7.00: 80293248 sectors, multi 0: LBA
<6>ata7.01: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.02, max UDMA/66
<6>ata7.00: configured for UDMA/100
<6>ata7.01: configured for UDMA/66
<4>BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00
<5>scsi 6:0:0:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5
<5>sd 6:0:0:0: [sdb] 80293248 512-byte hardware sectors (41110 MB)
<5>sd 6:0:0:0: [sdb] Write Protect is off
<7>sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 6:0:0:0: [sdb] 80293248 512-byte hardware sectors (41110 MB)
<5>sd 6:0:0:0: [sdb] Write Protect is off
<7>sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sdb: sdb1
<5>sd 6:0:0:0: [sdb] Attached SCSI disk
<5>sd 6:0:0:0: Attached scsi generic sg1 type 0
<5>scsi 6:0:1:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.02 PQ: 0 ANSI: 5
<5>scsi 6:0:1:0: Attached scsi generic sg2 type 5
<6>ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 18 (level, low) -> IRQ 18
<6>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
<7>PCI: Setting latency timer of device 0000:00:19.0 to 64
<6>e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1d:92:04:78:57
<6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
<6>ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:04:02.0 to 64
<6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
<7>PCI: Setting latency timer of device 0000:00:1b.0 to 64
<6>Intel(R) PRO/1000 Network Driver - 0.2.0
<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fddfe000-fddfe7ff] Max Packet=[2048] IR/IT contexts=[4/8]
<6>Copyright (c) 1999-2007 Intel Corporation.
<6>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
<7>ALSA sound/pci/hda/hda_codec.c:2333: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:2337: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:2341: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:2349: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x1c
<6>ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 17
<6>saa7133[0]: found at 0000:04:01.0, rev: 209, irq: 17, latency: 84, mmio: 0xfddff000
<6>saa7133[0]: subsystem: 16be:0010, board: UNKNOWN/GENERIC [card=0,autodetected]
<6>saa7133[0]: board init: gpio is 0
<6>saa7133[0]: i2c eeprom 00: be 16 10 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
<6>saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
<6>saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 2c 02 51 96 2b
<6>saa7133[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
<6>saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 22 15 00 fd 79 44 9f c2 8f
<6>saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<6>saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<6>saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<5>scsi 8:0:0:0: Direct-Access Generic Flash HS-CF 5.14 PQ: 0 ANSI: 0
<5>sd 8:0:0:0: [sdc] Attached SCSI removable disk
<5>sd 8:0:0:0: Attached scsi generic sg3 type 0
<5>scsi 8:0:0:1: Direct-Access Generic Flash HS-MS/SD 5.14 PQ: 0 ANSI: 0
<5>sd 8:0:0:1: [sdd] Attached SCSI removable disk
<5>sd 8:0:0:1: Attached scsi generic sg4 type 0
<5>scsi 8:0:0:2: Direct-Access Generic Flash HS-SM 5.14 PQ: 0 ANSI: 0
<5>sd 8:0:0:2: [sde] Attached SCSI removable disk
<5>sd 8:0:0:2: Attached scsi generic sg5 type 0
<7>usb-storage: device scan complete
<6>tuner 1-004b: chip found @ 0x96 (saa7133[0])
<6>tuner 1-004b: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
<6>tuner 1-004b: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
<6>saa7133[0]: registered device video0 [v4l2]
<6>saa7133[0]: registered device vbi0
<4>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 6:0:1:0: Attached scsi CD-ROM sr0
<6>Adding 2104504k swap on /dev/sda5. Priority:-1 extents:1 across:2104504k
<6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc000127aea1]
<6>loop: module loaded
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda7, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>fuse init (API version 7.8)
<6>AppArmor: AppArmor initialized
<5>audit(1206743483.816:2): type=1505 info="AppArmor initialized" pid=2305
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Fri Mar 28 22:31:12 2008
Creating device nodes with udev
Trying manual resume from /dev/sda5
Trying manual resume from /dev/sda5
Waiting for device /dev/sda6 to appear: ok
fsck 1.40.2 (12-Jul-2007)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda6
/dev/sda6: clean, 137780/1311552 files, 1081224/2622603 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/sda6
Boot logging started on /dev/tty1(/dev/console (deleted)) at Fri Mar 28 23:31:19 2008
done
Starting udevd udevd-event[1784]: node_symlink: device node '/dev/rtc0' already exists, link '/dev/rtc' will not overwrite it
done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
donemount: according to mtab, /dev/sda6 is already mounted on /
Activating device mapper...
done
Checking file systems...
fsck 1.40.2 (12-Jul-2007)
/dev/sda8: clean, 13037/5248992 files, 758972/10486420 blocks
/dev/sda7: clean, 16215/656000 files, 301889/1311297 blocks
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda7 on /home type ext3 (rw,acl,user_xattr)
doneConfiguring serial ports...
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
Activating remaining swap-devices in /etc/fstab...
done<notice>killproc: kill(1193,29)
Creating /var/log/boot.msg
doneMounting securityfs on /sys/kernel/security done
Loading AppArmor module done
Loading AppArmor profiles done
Setting up the hardware clockdone
Setting up hostname 'earth'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
Checking for network time protocol daemon (NTPD): unused
Can't determine current runlevel
done
System Boot Control: The system has been set up
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(1193,3)
INIT: Entering runlevel: 5
Boot logging started on /dev/tty1(/dev/console) at Fri Mar 28 22:31:25 2008
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice> ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Initializing random number generatordone
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 SPLASHCFG= PWD=/ resume=/dev/sda5 PREVLEVEL=N LINES=50 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 SPLASHCFG= PWD=/ resume=/dev/sda5 PREVLEVEL=N LINES=50 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog services.done
Starting resource managerdone
Starting D-Bus daemon<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/acpid ]
Starting acpid done
Unknown username "gdm" in message bus configuration file
done
Checking/updating CPU microcode done
Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
done
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting HAL daemondone
Loading CPUFreq modules (CPUFreq not supported)
Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 SPLASHCFG= PWD=/ resume=/dev/sda5 LANG=en_US.UTF-8 PREVLEVEL=N LINES=50 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
Checking for network time protocol daemon (NTPD): unused
done eth0 device: Intel Corporation 82801I (ICH9 Family) Gigabit Ethernet Controller (rev 02)
eth0 (DHCP) . . . . . <notice>pidofproc: dhcpcd 3140
<notice>killproc: kill(2542,20)
<notice>killproc: kill(2539,1)
<notice>killproc: kill(2542,18)
<notice>killproc: kill(2542,12)
IP/Netmask: 192.168.0.202 / 255.255.255.0
doneSetting up service network . . . . . . . . . . . . . . . .done
<notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/nmbd ]
Starting Samba NMB daemon done
Mount CIFS File Systems unused
Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
done<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
<notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/auditd ]
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting irqbalance done
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/portmap ]
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting Name Service Cache Daemondone
Starting RPC portmap daemondone
Starting auditd done
Starting SSH daemondone
Loading compose table latin1.adddone
Start Unicode mode
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
Starting cupsddone
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
Starting powersaved: done
done<notice>checkproc: /opt/kde3/bin/kdm 2841
<notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 TMPDIR=/var/tmp LC_ALL= INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= LANG=en_US.UTF-8 PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 LC_CTYPE= splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/smbd ]
Starting Avahi daemon.done
Starting Samba SMB daemon done
<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
Starting Avahi DNS Configuration daemondone
Starting mail service (Postfix)done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
Starting smartd <notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
done
Starting xend <notice>checkproc: /sbin/dhcpcd 3209
<notice>pidofproc: dhcpcd 4522
<notice>killproc: kill(2542,20)
<notice>killproc: kill(2539,1)
<notice>killproc: kill(2542,18)
<notice>killproc: kill(2542,12)
<notice>pidofproc: dhcpcd 4943
<notice>killproc: kill(2542,20)
<notice>killproc: kill(2539,1)
<notice>killproc: kill(2542,18)
<notice>killproc: kill(2542,12)
done
<notice>startproc: execve (/usr/sbin/libvirtd) [ /usr/sbin/libvirtd -d ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/libvirtd ]
Starting libvirtd done
Starting xendomainsunused
Starting Firewall Initialization (phase 2 of 2) done
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: smbfs splash xendomains
<notice>killproc: kill(2477,3)
Boot logging started on /dev/tty1(/dev/console) at Fri Mar 28 22:34:41 2008
Master Resource Control: previous runlevel: 5, switching to runlevel: 6
<notice>checkproc: /usr/sbin/smbd 4198
<notice>killproc: kill(4198,15)
<notice>killproc: kill(2841,15)
<notice>killproc: kill(4294,15)
<notice>killproc: kill(3568,15)
<notice>killproc: kill(3783,15)
<notice>killproc: kill(5141,15)
<notice>killproc: kill(4313,15)
<notice>killproc: kill(3777,15)
Shutting down the Firewall skipped
Shutting down Avahi DNS Configuration daemondone
<notice>killproc: kill(4202,15)
<notice>killproc: kill(3514,15)
<notice>killproc: kill(3599,15)
Shutting down Samba SMB daemon done
Saving random seeddone
Shutting down service kdmdone
done
<notice>killproc: kill(3717,15)
Shutting down CRON daemondone
Shutting down Name Service Cache Daemondone
Shutting down SSH daemondone
Shutting down libvirtd done
Shutting down smartd done
Shutting down service kdmdone
Shutting down irqbalance done
Shutting down mail service (Postfix)done
Shutting down auditd done
Shutting down cupsddone
Shutting down Avahi daemondone
<notice>killproc: kill(3590,15)
Shutting down RPC portmap daemondone
Shutting down Xen domains
done
Stopping xend (pid 4323 4329 5127) done
Shutting down powersaved done
Umount SMB/ CIFS File Systems done
Shutting down Samba NMB daemon <notice>checkproc: /usr/sbin/nmbd 3413
<notice>killproc: kill(3413,15)
done
<notice>killproc: kill(2542,15)
<notice>killproc: kill(2539,15)
Shutting down syslog servicesdone
Shutting down network interfaces:
eth0
done peth0 device: Intel Corporation 82801I (ICH9 Family) Gigabit Ethernet Controller (rev 02)
No configuration found for peth0
Nevertheless the interface will be shut down.
done veth1
No configuration found for veth1
Nevertheless the interface will be shut down.
done veth2
No configuration found for veth2
Nevertheless the interface will be shut down.
done veth3
No configuration found for veth3
Nevertheless the interface will be shut down.
done vif0.0
No configuration found for vif0.0
Nevertheless the interface will be shut down.
done vif0.1
No configuration found for vif0.1
Nevertheless the interface will be shut down.
done vif0.2
No configuration found for vif0.2
Nevertheless the interface will be shut down.
done vif0.3
No configuration found for vif0.3
Nevertheless the interface will be shut down.
done xenbr0
No configuration found for xenbr0
Nevertheless the interface will be shut down.
doneShutting down service network . . . . . . . . . . . . . . .done
Shutting down HAL daemon<notice>killproc: kill(2743,15)
done
<notice>killproc: kill(2565,15)
acpid: exiting
<notice>killproc: kill(2657,15)
<notice>killproc: kill(2549,15)
Shutting down ConsoleKitdone
Shutting down acpid done
Shutting down resource managerdone
Shutting down D-Bus daemon<notice>killproc: kill(2566,15)
done
Running /etc/init.d/halt.local
done<notice>killproc: kill(5376,3)
Sending all processes the TERM signal...
Sorry für dieses lange Posting.
Für einen Tip wo ich weitersuchen kann wäre ich wirklich sehr dankbar!
ich habe mittels YAST XEN und den XEN-kernel installiert. Beim Booten des XEN-kernels hängt sich der PC jedoch auf.
Nach dem eine ganze Reihe normal aussehende Boot messages abgelaufen sind wird der Schirm schwarz und es wird nur noch eine Zeile angezeigt:
Starting AVAHI daemon done
Dann habe ich versuchshalber diesen daemon disabled und dann bleibts das ganze beim cron daemon hängen.
Ich habe eine Intel Core 2 Quad Q6600 2,4 GHz Rechner. 4GB RAM
Meine Grub menu list:
# Modified by YaST2. Last modification on Fri Mar 28 22:14:57 CET 2008
default 1
timeout 8
gfxmenu (hd0,5)/boot/message
###Don't change this comment - YaST2 identifier: Original name: xen###
title XEN -- openSUSE 10.3 - 2.6.22.17-0.1
root (hd0,5)
kernel /boot/xen.gz dom0_mem=2048M
module /boot/vmlinuz-2.6.22.17-0.1-xen root=/dev/sda6 vga=normal resume=/dev/sda5 splash=silent showopts
module /boot/initrd-2.6.22.17-0.1-xen
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.3 - 2.6.22.17-0.1
root (hd0,5)
kernel /boot/vmlinuz-2.6.22.17-0.1-default root=/dev/sda6 vga=0x317 resume=/dev/sda5 splash=silent showopts
initrd /boot/initrd-2.6.22.17-0.1-default
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.3 - 2.6.22.17-0.1
root (hd0,5)
kernel /boot/vmlinuz-2.6.22.17-0.1-default root=/dev/sda6 vga=normal showopts ide=nodma apm=off acpi=off noresume edd=off 3
initrd /boot/initrd-2.6.22.17-0.1-default
###Don't change this comment - YaST2 identifier: Original name: windows###
title Windows
rootnoverify (hd0,5)
chainloader (hd0,0)+1
###Don't change this comment - YaST2 identifier: Original name: floppy###
title Floppy
rootnoverify (hd0,5)
chainloader (fd0)+1
Hier sind die ganzen Boot messages .... die letzten Zeilen kommen zustande durch das Herunterfahren nach Alt-Strg-Entf
Inspecting /boot/System.map-2.6.22.17-0.1-xen
Loaded 25259 symbols from /boot/System.map-2.6.22.17-0.1-xen.
Symbols match kernel version 2.6.22.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.22.17-0.1-xen (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/10 20:01:04 UTC
<6>Command line: root=/dev/sda6 vga=normal resume=/dev/sda5 splash=silent
<6>BIOS-provided physical RAM map:
<4> Xen: 0000000000000000 - 0000000080800000 (usable)
<7>Entering add_active_range(0, 0, 526336) 0 entries of 256 used
<4>end_pfn_map = 526336
<6>DMI 2.5 present.
<7>Entering add_active_range(0, 0, 526336) 0 entries of 256 used
<4>Zone PFN ranges:
<4> DMA 0 -> 526336
<4> DMA32 526336 -> 526336
<4> Normal 526336 -> 526336
<4>early_node_map[1] active PFN ranges
<4> 0: 0 -> 526336
<7>On node 0 totalpages: 526336
<7> DMA zone: 7196 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 519140 pages, LIFO batch:31
<7> DMA32 zone: 0 pages used for memmap
<7> Normal zone: 0 pages used for memmap
<4>ACPI: RSDP 000F8010, 0014 (r0 MEDION)
<4>ACPI: RSDT CFEE3000, 003C (r1 MEDION MEDIONAG 42302E31 AWRD 0)
<4>ACPI: FACP CFEE3080, 0074 (r1 MEDION MEDIONAG 42302E31 AWRD 0)
<4>ACPI: DSDT CFEE3100, 475A (r1 MEDION AWRDACPI 1000 MSFT 3000000)
<4>ACPI: FACS CFE90000, 0040
<4>ACPI: HPET CFEE7AC0, 0038 (r1 MEDION MEDIONAG 42302E31 AWRD 98)
<4>ACPI: MCFG CFEE7B00, 003C (r1 MEDION MEDIONAG 42302E31 AWRD 0)
<4>ACPI: SLIC CFEE7880, 0176 (r1 MEDION MEDIONAG 42302E31 AWRD 0)
<4>ACPI: APIC CFEE7A00, 0084 (r1 MEDION MEDIONAG 42302E31 AWRD 0)
<4>ACPI: SSDT CFEE8460, 0380 (r1 PmRef CpuPm 3000 INTL 20041203)
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
<6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
<6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<6>Setting APIC routing to xen
<6>Using ACPI (MADT) for SMP configuration information
<6>Allocating PCI resources starting at d0000000 (gap: cff00000:10100000)
<6>PERCPU: Allocating 24952 bytes of per cpu data
<4>Built 1 zonelists. Total pages: 519140
<5>Kernel command line: root=/dev/sda6 vga=normal resume=/dev/sda5 splash=silent
<6>bootsplash: silent mode.
<4>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 32768 bytes)
<6>Xen reported: 2392.556 MHz processor.
<4>Console: colour VGA+ 80x50
<4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
<4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
<6>Software IO TLB enabled:
<4> Aperture: 64 megabytes
<4> Kernel range: ffff8800037e6000 - ffff8800077e6000
<4> Address size: 27 bits
<6>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<4>Memory: 1975808k/2105344k available (2007k kernel code, 120616k reserved, 918k data, 188k init)
<4>Calibrating delay using timer specific routine.. 4787.06 BogoMIPS (lpj=9574138)
<6>Security Framework v1.0.0 initialized
<4>Mount-cache hash table entries: 256
<6>CPU: L1 I cache: 32K, L1 D cache: 32K
<6>CPU: L2 cache: 4096K
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 0
<6>SMP alternatives: switching to UP code
<6>Unpacking initramfs... done
<6>Freeing initrd memory: 9911k freed
<6>ACPI: Core revision 20070126
<4>Parsing all Control Methods:
<4>Table [DSDT](id 0001) - 663 Objects with 61 Devices 179 Methods 37 Regions
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0002) - 27 Objects with 0 Devices 4 Methods 0 Regions
<4> tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
<4>evxfevnt-0091 [00] enable : Transition to ACPI mode successful
<6>SMP alternatives: switching to SMP code
<4>Initializing CPU#1
<4>Initializing CPU#2
<6>Brought up 4 CPUs
<4>Initializing CPU#3
<4>migration_cost=3338
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: Using MMCONFIG at e0000000 - efffffff
<4>evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 3F [_GPE] 8 regs on int 0x9
<4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 10 Wake, Enabled 2 Runtime GPEs in this block
<7>ACPI: EC: Look up EC in DSDT
<4>Completing Region/Field/Buffer/Package initialization:.....................................................................................
<4>Initialized 33/37 Regions 9/9 Fields 19/19 Buffers 24/24 Packages (699 nodes)
<4>Initializing Device/Processor/Thermal objects by executing _INI methods:..
<4>Executed 2 _INI methods requiring 1 _STA executions (examined 68 objects)
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: Probing PCI hardware (bus 00)
<4>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
<4>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
<6>PCI: Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 *7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 14 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>xen_mem: Initialising balloon driver.
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<4>ACPI: RTC can wake from S4
<6>pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved
<6>pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
<6>pnp: 00:0d: iomem range 0xf0000-0xfffff could not be reserved
<6>pnp: 00:0d: iomem range 0xcff00000-0xcfffffff has been reserved
<6>pnp: 00:0d: iomem range 0xfed00000-0xfed000ff could not be reserved
<6>pnp: 00:0d: iomem range 0xcfe90000-0xcfefffff could not be reserved
<6>PCI: Bridge: 0000:00:01.0
<6>Time: xen clocksource has been installed.
<6> IO window: d000-dfff
<6> MEM window: f8000000-fbffffff
<6> PREFETCH window: d0000000-dfffffff
<6>PCI: Bridge: 0000:00:1c.0
<6> IO window: c000-cfff
<6> MEM window: fde00000-fdefffff
<6> PREFETCH window: fdb00000-fdbfffff
<6>PCI: Bridge: 0000:00:1c.4
<6> IO window: b000-bfff
<6> MEM window: fda00000-fdafffff
<6> PREFETCH window: fd900000-fd9fffff
<6>PCI: Bridge: 0000:00:1e.0
<6> IO window: a000-afff
<6> MEM window: fdd00000-fddfffff
<6> PREFETCH window: fdc00000-fdcfffff
<6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<6>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
<4>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>audit: initializing netlink socket (disabled)
<5>audit(1206743471.708:1): initialized
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>Boot video device is 0000:01:00.0
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:01.0
cie00]<7>Allocate Port Service[0000:00:01.0
cie03]<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.0
cie00]<7>Allocate Port Service[0000:00:1c.0
cie02]<7>Allocate Port Service[0000:00:1c.0
cie03]<7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.4
cie00]<7>Allocate Port Service[0000:00:1c.4
cie02]<7>Allocate Port Service[0000:00:1c.4
cie03]<6>Real Time Clock Driver v1.12ac
<4>hpet_acpi_add: no address or irqs in _CRS
<6>Non-volatile memory driver v1.2
<4>Event-channel device installed.
<6>PNP: PS/2 Controller [PNP0303
S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>mice: PS/2 mouse device common for all mice
<6>input: AT Translated Set 2 keyboard as /class/input/input0
<6>input: PC Speaker as /class/input/input1
<6>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
<6>NET: Registered protocol family 1
<6>Freeing unused kernel memory: 188k freed
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>USB Universal Host Controller Interface driver v3.0
<6>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:1a.0 to 64
<6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
<6>usb usb1: new device found, idVendor=0000, idProduct=0000
<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: UHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.22.17-0.1-xen uhci_hcd
<6>usb usb1: SerialNumber: 0000:00:1a.0
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 21
<7>PCI: Setting latency timer of device 0000:00:1a.1 to 64
<6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
<6>usb usb2: new device found, idVendor=0000, idProduct=0000
<6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.22.17-0.1-xen uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:1a.1
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
<6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
<7>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
<6>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000
<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb3: new device found, idVendor=0000, idProduct=0000
<6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: EHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.22.17-0.1-xen ehci_hcd
<6>usb usb3: SerialNumber: 0000:00:1a.7
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 6 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
<7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
<6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000
<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb4: new device found, idVendor=0000, idProduct=0000
<6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: EHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.22.17-0.1-xen ehci_hcd
<6>usb usb4: SerialNumber: 0000:00:1d.7
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 6 ports detected
<6>ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19
<7>PCI: Setting latency timer of device 0000:00:1a.2 to 64
<6>uhci_hcd 0000:00:1a.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
<6>uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
<6>usb usb5: new device found, idVendor=0000, idProduct=0000
<6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb5: Product: UHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.22.17-0.1-xen uhci_hcd
<6>usb usb5: SerialNumber: 0000:00:1a.2
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
<6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
<6>usb usb6: new device found, idVendor=0000, idProduct=0000
<6>usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb6: Product: UHCI Host Controller
<6>usb usb6: Manufacturer: Linux 2.6.22.17-0.1-xen uhci_hcd
<6>usb usb6: SerialNumber: 0000:00:1d.0
<6>usb usb6: configuration #1 chosen from 1 choice
<6>hub 6-0:1.0: USB hub found
<6>hub 6-0:1.0: 2 ports detected
<6>usb 3-4: new high speed USB device using ehci_hcd and address 2
<6>ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
<6>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
<6>usb usb7: new device found, idVendor=0000, idProduct=0000
<6>usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb7: Product: UHCI Host Controller
<6>usb usb7: Manufacturer: Linux 2.6.22.17-0.1-xen uhci_hcd
<6>usb usb7: SerialNumber: 0000:00:1d.1
<6>usb usb7: configuration #1 chosen from 1 choice
<6>hub 7-0:1.0: USB hub found
<6>hub 7-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
<6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
<6>usb usb8: new device found, idVendor=0000, idProduct=0000
<6>usb usb8: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb8: Product: UHCI Host Controller
<6>usb usb8: Manufacturer: Linux 2.6.22.17-0.1-xen uhci_hcd
<6>usb usb8: SerialNumber: 0000:00:1d.2
<6>usb usb8: configuration #1 chosen from 1 choice
<6>hub 8-0:1.0: USB hub found
<6>hub 8-0:1.0: 2 ports detected
<6>usb 3-4: new device found, idVendor=0424, idProduct=2228
<6>usb 3-4: new device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 3-4: Product: Flash Card Reader
<6>usb 3-4: Manufacturer: Generic
<6>usb 3-4: SerialNumber: 000022272228
<6>usb 3-4: configuration #1 chosen from 1 choice
<7>ahci 0000:00:1f.2: version 3.0
<6>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
<6>usb 7-1: new full speed USB device using uhci_hcd and address 2
<6>usb 7-1: new device found, idVendor=03f0, idProduct=0904
<6>usb 7-1: new device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 7-1: Product: DeskJet 845C
<6>usb 7-1: Manufacturer: Hewlett-Packard
<6>usb 7-1: SerialNumber: TH24O251DW3J
<6>usb 7-1: configuration #1 chosen from 1 choice
<6>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
<6>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part
<7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
<6>scsi0 : ahci
<6>scsi1 : ahci
<6>scsi2 : ahci
<6>scsi3 : ahci
<6>scsi4 : ahci
<6>scsi5 : ahci
<6>ata1: SATA max UDMA/133 cmd 0xffffc20000024100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
<6>ata2: SATA max UDMA/133 cmd 0xffffc20000024180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
<6>ata3: SATA max UDMA/133 cmd 0xffffc20000024200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
<6>ata4: SATA max UDMA/133 cmd 0xffffc20000024280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
<6>ata5: SATA max UDMA/133 cmd 0xffffc20000024300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
<6>ata6: SATA max UDMA/133 cmd 0xffffc20000024380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
<6>ata1: SATA link down (SStatus 0 SControl 300)
<6>ata2: SATA link down (SStatus 0 SControl 300)
<6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>ata3.00: ATA-8: ST3500320AS, SD15, max UDMA/133
<6>ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
<6>ata3.00: configured for UDMA/133
<6>ata4: SATA link down (SStatus 0 SControl 300)
<6>ata5: SATA link down (SStatus 0 SControl 300)
<6>ata6: SATA link down (SStatus 0 SControl 300)
<5>scsi 2:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
<5>sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
<5>sd 2:0:0:0: [sda] Write Protect is off
<7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
<5>sd 2:0:0:0: [sda] Write Protect is off
<7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
<5>sd 2:0:0:0: [sda] Attached SCSI disk
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda6, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<5>sd 2:0:0:0: Attached scsi generic sg0 type 0
<6>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
<4>rtc_cmos: probe of 00:04 failed with error -16
<6>input: Power Button (FF) as /class/input/input3
<6>ACPI: Power Button (FF) [PWRF]
<6>input: Power Button (CM) as /class/input/input4
<6>ACPI: Power Button (CM) [PWRB]
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>Linux agpgart interface v0.102 (c) Dave Jones
<4>ACPI: SSDT CFEE7B80, 022A (r1 PmRef Cpu0Ist 3000 INTL 20041203)
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0088) - 5 Objects with 0 Devices 3 Methods 0 Regions
<4>ACPI: SSDT CFEE8040, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20041203)
<4>Parsing all Control Methods:
<4>Table [SSDT](id 008A) - 3 Objects with 0 Devices 3 Methods 0 Regions
<4>ACPI: SSDT CFEE81A0, 0152 (r1 PmRef Cpu2Ist 3000 INTL 20041203)
<4>Parsing all Control Methods:
<4>Table [SSDT](id 008C) - 3 Objects with 0 Devices 3 Methods 0 Regions
<4>ACPI: SSDT CFEE8300, 0152 (r1 PmRef Cpu3Ist 3000 INTL 20041203)
<4>Parsing all Control Methods:
<4>Table [SSDT](id 008E) - 3 Objects with 0 Devices 3 Methods 0 Regions
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
<6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:03:00.0 to 64
<6>scsi6 : pata_marvell
<6>00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>scsi7 : pata_marvell
<6>ata7: PATA max UDMA/100 cmd 0x000000000001bf00 ctl 0x000000000001be02 bmdma 0x000000000001bb00 irq 16
<6>ata8: PATA max UDMA/133 cmd 0x000000000001bd00 ctl 0x000000000001bc02 bmdma 0x000000000001bb08 irq 16
<4>BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00
<6>ACPI: Thermal Zone [THRM] (22 C)
<6>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904
<6>usbcore: registered new interface driver usblp
<6>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
<6>Initializing USB Mass Storage driver...
<6>scsi8 : SCSI emulation for USB Mass Storage devices
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<6>ACPI: Fan [FAN] (on)
<6>Linux video capture interface: v2.00
<6>Intel(R) PRO/1000 Network Driver - version 7.6.5-NAPI
<6>Copyright (c) 1999-2007 Intel Corporation.
<6>saa7130/34: v4l2 driver version 0.2.14 loaded
<6>ata7.00: ATA-7: Maxtor 6E040L0, NAR61EA0, max UDMA/133
<6>ata7.00: 80293248 sectors, multi 0: LBA
<6>ata7.01: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.02, max UDMA/66
<6>ata7.00: configured for UDMA/100
<6>ata7.01: configured for UDMA/66
<4>BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00
<5>scsi 6:0:0:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5
<5>sd 6:0:0:0: [sdb] 80293248 512-byte hardware sectors (41110 MB)
<5>sd 6:0:0:0: [sdb] Write Protect is off
<7>sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 6:0:0:0: [sdb] 80293248 512-byte hardware sectors (41110 MB)
<5>sd 6:0:0:0: [sdb] Write Protect is off
<7>sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sdb: sdb1
<5>sd 6:0:0:0: [sdb] Attached SCSI disk
<5>sd 6:0:0:0: Attached scsi generic sg1 type 0
<5>scsi 6:0:1:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.02 PQ: 0 ANSI: 5
<5>scsi 6:0:1:0: Attached scsi generic sg2 type 5
<6>ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 18 (level, low) -> IRQ 18
<6>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
<7>PCI: Setting latency timer of device 0000:00:19.0 to 64
<6>e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1d:92:04:78:57
<6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
<6>ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:04:02.0 to 64
<6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
<7>PCI: Setting latency timer of device 0000:00:1b.0 to 64
<6>Intel(R) PRO/1000 Network Driver - 0.2.0
<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fddfe000-fddfe7ff] Max Packet=[2048] IR/IT contexts=[4/8]
<6>Copyright (c) 1999-2007 Intel Corporation.
<6>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
<7>ALSA sound/pci/hda/hda_codec.c:2333: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:2337: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:2341: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:2349: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x1c
<6>ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 17
<6>saa7133[0]: found at 0000:04:01.0, rev: 209, irq: 17, latency: 84, mmio: 0xfddff000
<6>saa7133[0]: subsystem: 16be:0010, board: UNKNOWN/GENERIC [card=0,autodetected]
<6>saa7133[0]: board init: gpio is 0
<6>saa7133[0]: i2c eeprom 00: be 16 10 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
<6>saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
<6>saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 2c 02 51 96 2b
<6>saa7133[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
<6>saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 22 15 00 fd 79 44 9f c2 8f
<6>saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<6>saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<6>saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<5>scsi 8:0:0:0: Direct-Access Generic Flash HS-CF 5.14 PQ: 0 ANSI: 0
<5>sd 8:0:0:0: [sdc] Attached SCSI removable disk
<5>sd 8:0:0:0: Attached scsi generic sg3 type 0
<5>scsi 8:0:0:1: Direct-Access Generic Flash HS-MS/SD 5.14 PQ: 0 ANSI: 0
<5>sd 8:0:0:1: [sdd] Attached SCSI removable disk
<5>sd 8:0:0:1: Attached scsi generic sg4 type 0
<5>scsi 8:0:0:2: Direct-Access Generic Flash HS-SM 5.14 PQ: 0 ANSI: 0
<5>sd 8:0:0:2: [sde] Attached SCSI removable disk
<5>sd 8:0:0:2: Attached scsi generic sg5 type 0
<7>usb-storage: device scan complete
<6>tuner 1-004b: chip found @ 0x96 (saa7133[0])
<6>tuner 1-004b: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
<6>tuner 1-004b: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
<6>saa7133[0]: registered device video0 [v4l2]
<6>saa7133[0]: registered device vbi0
<4>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 6:0:1:0: Attached scsi CD-ROM sr0
<6>Adding 2104504k swap on /dev/sda5. Priority:-1 extents:1 across:2104504k
<6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc000127aea1]
<6>loop: module loaded
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda7, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>fuse init (API version 7.8)
<6>AppArmor: AppArmor initialized
<5>audit(1206743483.816:2): type=1505 info="AppArmor initialized" pid=2305
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Fri Mar 28 22:31:12 2008
Creating device nodes with udev
Trying manual resume from /dev/sda5
Trying manual resume from /dev/sda5
Waiting for device /dev/sda6 to appear: ok
fsck 1.40.2 (12-Jul-2007)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda6
/dev/sda6: clean, 137780/1311552 files, 1081224/2622603 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/sda6
Boot logging started on /dev/tty1(/dev/console (deleted)) at Fri Mar 28 23:31:19 2008
done
Starting udevd udevd-event[1784]: node_symlink: device node '/dev/rtc0' already exists, link '/dev/rtc' will not overwrite it
done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
donemount: according to mtab, /dev/sda6 is already mounted on /
Activating device mapper...
done
Checking file systems...
fsck 1.40.2 (12-Jul-2007)
/dev/sda8: clean, 13037/5248992 files, 758972/10486420 blocks
/dev/sda7: clean, 16215/656000 files, 301889/1311297 blocks
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda7 on /home type ext3 (rw,acl,user_xattr)
doneConfiguring serial ports...
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
Activating remaining swap-devices in /etc/fstab...
done<notice>killproc: kill(1193,29)
Creating /var/log/boot.msg
doneMounting securityfs on /sys/kernel/security done
Loading AppArmor module done
Loading AppArmor profiles done
Setting up the hardware clockdone
Setting up hostname 'earth'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
Checking for network time protocol daemon (NTPD): unused
Can't determine current runlevel
done
System Boot Control: The system has been set up
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(1193,3)
INIT: Entering runlevel: 5
Boot logging started on /dev/tty1(/dev/console) at Fri Mar 28 22:31:25 2008
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice> ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Initializing random number generatordone
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 SPLASHCFG= PWD=/ resume=/dev/sda5 PREVLEVEL=N LINES=50 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 SPLASHCFG= PWD=/ resume=/dev/sda5 PREVLEVEL=N LINES=50 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog services.done
Starting resource managerdone
Starting D-Bus daemon<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/acpid ]
Starting acpid done
Unknown username "gdm" in message bus configuration file
done
Checking/updating CPU microcode done
Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
done
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting HAL daemondone
Loading CPUFreq modules (CPUFreq not supported)
Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 SPLASHCFG= PWD=/ resume=/dev/sda5 LANG=en_US.UTF-8 PREVLEVEL=N LINES=50 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
Checking for network time protocol daemon (NTPD): unused
done eth0 device: Intel Corporation 82801I (ICH9 Family) Gigabit Ethernet Controller (rev 02)
eth0 (DHCP) . . . . . <notice>pidofproc: dhcpcd 3140
<notice>killproc: kill(2542,20)
<notice>killproc: kill(2539,1)
<notice>killproc: kill(2542,18)
<notice>killproc: kill(2542,12)
IP/Netmask: 192.168.0.202 / 255.255.255.0
doneSetting up service network . . . . . . . . . . . . . . . .done
<notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/nmbd ]
Starting Samba NMB daemon done
Mount CIFS File Systems unused
Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
done<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
<notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/auditd ]
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting irqbalance done
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/portmap ]
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting Name Service Cache Daemondone
Starting RPC portmap daemondone
Starting auditd done
Starting SSH daemondone
Loading compose table latin1.adddone
Start Unicode mode
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
Starting cupsddone
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
Starting powersaved: done
done<notice>checkproc: /opt/kde3/bin/kdm 2841
<notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 TMPDIR=/var/tmp LC_ALL= INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= LANG=en_US.UTF-8 PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 LC_CTYPE= splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/smbd ]
Starting Avahi daemon.done
Starting Samba SMB daemon done
<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
Starting Avahi DNS Configuration daemondone
Starting mail service (Postfix)done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
Starting smartd <notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
done
Starting xend <notice>checkproc: /sbin/dhcpcd 3209
<notice>pidofproc: dhcpcd 4522
<notice>killproc: kill(2542,20)
<notice>killproc: kill(2539,1)
<notice>killproc: kill(2542,18)
<notice>killproc: kill(2542,12)
<notice>pidofproc: dhcpcd 4943
<notice>killproc: kill(2542,20)
<notice>killproc: kill(2539,1)
<notice>killproc: kill(2542,18)
<notice>killproc: kill(2542,12)
done
<notice>startproc: execve (/usr/sbin/libvirtd) [ /usr/sbin/libvirtd -d ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=normal RUNLEVEL=5 resume=/dev/sda5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/libvirtd ]
Starting libvirtd done
Starting xendomainsunused
Starting Firewall Initialization (phase 2 of 2) done
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: smbfs splash xendomains
<notice>killproc: kill(2477,3)
Boot logging started on /dev/tty1(/dev/console) at Fri Mar 28 22:34:41 2008
Master Resource Control: previous runlevel: 5, switching to runlevel: 6
<notice>checkproc: /usr/sbin/smbd 4198
<notice>killproc: kill(4198,15)
<notice>killproc: kill(2841,15)
<notice>killproc: kill(4294,15)
<notice>killproc: kill(3568,15)
<notice>killproc: kill(3783,15)
<notice>killproc: kill(5141,15)
<notice>killproc: kill(4313,15)
<notice>killproc: kill(3777,15)
Shutting down the Firewall skipped
Shutting down Avahi DNS Configuration daemondone
<notice>killproc: kill(4202,15)
<notice>killproc: kill(3514,15)
<notice>killproc: kill(3599,15)
Shutting down Samba SMB daemon done
Saving random seeddone
Shutting down service kdmdone
done
<notice>killproc: kill(3717,15)
Shutting down CRON daemondone
Shutting down Name Service Cache Daemondone
Shutting down SSH daemondone
Shutting down libvirtd done
Shutting down smartd done
Shutting down service kdmdone
Shutting down irqbalance done
Shutting down mail service (Postfix)done
Shutting down auditd done
Shutting down cupsddone
Shutting down Avahi daemondone
<notice>killproc: kill(3590,15)
Shutting down RPC portmap daemondone
Shutting down Xen domains
done
Stopping xend (pid 4323 4329 5127) done
Shutting down powersaved done
Umount SMB/ CIFS File Systems done
Shutting down Samba NMB daemon <notice>checkproc: /usr/sbin/nmbd 3413
<notice>killproc: kill(3413,15)
done
<notice>killproc: kill(2542,15)
<notice>killproc: kill(2539,15)
Shutting down syslog servicesdone
Shutting down network interfaces:
eth0
done peth0 device: Intel Corporation 82801I (ICH9 Family) Gigabit Ethernet Controller (rev 02)
No configuration found for peth0
Nevertheless the interface will be shut down.
done veth1
No configuration found for veth1
Nevertheless the interface will be shut down.
done veth2
No configuration found for veth2
Nevertheless the interface will be shut down.
done veth3
No configuration found for veth3
Nevertheless the interface will be shut down.
done vif0.0
No configuration found for vif0.0
Nevertheless the interface will be shut down.
done vif0.1
No configuration found for vif0.1
Nevertheless the interface will be shut down.
done vif0.2
No configuration found for vif0.2
Nevertheless the interface will be shut down.
done vif0.3
No configuration found for vif0.3
Nevertheless the interface will be shut down.
done xenbr0
No configuration found for xenbr0
Nevertheless the interface will be shut down.
doneShutting down service network . . . . . . . . . . . . . . .done
Shutting down HAL daemon<notice>killproc: kill(2743,15)
done
<notice>killproc: kill(2565,15)
acpid: exiting
<notice>killproc: kill(2657,15)
<notice>killproc: kill(2549,15)
Shutting down ConsoleKitdone
Shutting down acpid done
Shutting down resource managerdone
Shutting down D-Bus daemon<notice>killproc: kill(2566,15)
done
Running /etc/init.d/halt.local
done<notice>killproc: kill(5376,3)
Sending all processes the TERM signal...
Sorry für dieses lange Posting.
Für einen Tip wo ich weitersuchen kann wäre ich wirklich sehr dankbar!