Plasma-Desktop nimmt über Stunden immer mehr CPU in Anspruch

Opensource Anhänger · 30 Okt. 2011

Hallo ich muss nach paar Stunden mich einmal abmelden und wieder anmelden um mein Problem mit dem Plasma Desktop in den Griff zu bekommen.
Unter Top findete man immer als Übeltäter "Plasma-Desktop" welches sich 90% und mehr CPU nimmt. (Insgesamt läuft die CPU nur noch bei 100 %
Dies mach allerdings variable. Das heißt wenn ich eine Anwendung startet, kommt die einigermaßen aus den Tee weil Plasma-Desktop etwas abgibt.
Insgesamt beleibt die CPU Last aber immer bei 100 %.

Danke für eure Hilfen

Anonymous · 18 Nov. 2011

Hallo,

Wie hast Du Deinen Desktop denn eingerichtet ? Beeinflussen könnten beispielsweise:

Die Anzahl / Konfiguration der aktiven Wigdets
Plasma und Desktop Einstellungen
Systray Konfiguration

Intersseante Fragen wären auch:

Macht sich dieser Umstand in der Gesamtperformance bemerkbar ? Falls ja, wann?
Da Du schreibst es würden ggf Ressourcen frei gemacht für andere Prozesse: Laufen die Anwednungen an sich denn flüssig ?
Kommt es auch zu Abstürzen ?
Welche CPU und wieviel Ram verwendest Du ?

Und gib uns doch bitte mal die Ergebnisse folgendes Befehls:

Code:

dmesg | grep fglrx

Opensource Anhänger · 19 Nov. 2011

Hallo ich habe gerade den Rechner frisch hochgefahren und werde jetzt die Ergebnisse liefern, beim frisch hochgefahrenen PC.

Falls du die gleichen Ergebnisse bei einem längeren Lauf brauchst, werde ich sie gerne noch liefern.

dmesg | grep fglrx hat nichts geliefert ich habe deswegen das Egebnis von nur dmesg hier her gebracht grep fglrx bringt auch kein Ergebnis.

Was ich noch als Vermutung habe, dass das Profil vielleicht nicht unschuldig ist, da ich schon seit über 5 Jahren damit arbeite.
Bei meiner Frau konnte ich das nicht beobachten, allerdings hat sie ihr Profil selten lange laufen.

Eventuell währe es ja auch etwas ein neues Profil anzulegen. Da müsste mir aber jemand sagen, wie am besten ich alles in ein neues Profil hinüber kopiere, welche Einstellungen ich mit nehmen kann, und welche Profileinstellungen ich vermeiden sollte.

Eventuell kannst du mir ja auch so helfen.

Erst mal vielen Dank für deine Hilfe.

P.S. ich musste das Ergebnisse auf zwei Post teilen da für einen Post zu viele Zeichen war.

Code:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.37.6-0.9-desktop (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP PREEMPT 2011-10-19 22:33:27 +0200
[    0.000000] Command line: init=/bin/systemd root=/dev/disk/by-id/ata-SAMSUNG_HD403LJ_S0NFJ1MP701394-part1 repair=1 resume=/dev/disk/by-id/ata-WDC_WD2500JB-19GVA0_WD-WCAL73573703-part5 splash=silent quiet vga=0x317
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[    0.000000]  BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.3 present.
[    0.000000] DMI: System manufacturer System Product Name/A8V-E SE, BIOS ASUS A8V-E SE ACPI BIOS Revision 1010 01/13/2006
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] AGP bridge at 00:00:00
[    0.000000] Aperture from AGP @ d0000000 old size 32 MB
[    0.000000] Aperture from AGP @ d0000000 size 128 MB (APSIZE f20)
[    0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 007FF00000 mask FFFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled                                                                                                                                                                                
[    0.000000]   5 disabled                                                                                                                                                                                
[    0.000000]   6 disabled                                                                                                                                                                                
[    0.000000]   7 disabled                                                                                                                                                                                
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106                                                                                                                            
[    0.000000] found SMP MP-table at [ffff8800000f5810] f5810                                                                                                                                              
[    0.000000] initial memory mapped : 0 - 20000000                                                                                                                                                        
[    0.000000] init_memory_mapping: 0000000000000000-000000007fee0000                                                                                                                                      
[    0.000000]  0000000000 - 007fe00000 page 2M                                                                                                                                                            
[    0.000000]  007fe00000 - 007fee0000 page 4k                                                                                                                                                            
[    0.000000] kernel direct mapping tables up to 7fee0000 @ 1fffc000-20000000                                                                                                                             
[    0.000000] RAMDISK: 37510000 - 37ff0000                                                                                                                                                                
[    0.000000] ACPI: RSDP 00000000000f7910 00014 (v00 K8T890)
[    0.000000] ACPI: RSDT 000000007fee3040 00034 (v01 K8T890 AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 000000007fee30c0 00074 (v01 K8T890 AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 000000007fee3180 07932 (v01 K8T890 AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 000000007fee0000 00040
[    0.000000] ACPI: SSDT 000000007feeabc0 000F7 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: MCFG 000000007feead00 0003C (v01 K8T890 AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 000000007feeab00 00074 (v01 K8T890 AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000007fee0000
[    0.000000] Initmem setup node 0 0000000000000000-000000007fee0000
[    0.000000]   NODE_DATA [000000007fecc000 - 000000007fedffff]
[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007fee0
[    0.000000] On node 0 totalpages: 523887
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7109 pages used for memmap
[    0.000000]   DMA32 zone: 512795 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 64
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:60100000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s78592 r8192 d23808 u1048576
[    0.000000] pcpu-alloc: s78592 r8192 d23808 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516716
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: init=/bin/systemd root=/dev/disk/by-id/ata-SAMSUNG_HD403LJ_S0NFJ1MP701394-part1 repair=1 resume=/dev/disk/by-id/ata-WDC_WD2500JB-19GVA0_WD-WCAL73573703-part5 splash=silent quiet vga=0x317
[    0.000000] bootsplash: silent mode.
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] AGP bridge at 00:00:00
[    0.000000] Aperture from AGP @ d0000000 old size 32 MB
[    0.000000] Aperture from AGP @ d0000000 size 128 MB (APSIZE f20)
[    0.000000] Node 0: aperture @ ff8c000000 size 128 MB
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 2041236k/2096000k available (5309k kernel code, 452k absent, 54312k reserved, 6117k data, 936k init)
[    0.000000] Preemptable hierarchical RCU implementation.
[    0.000000]  RCU-based detection of stalled CPUs is disabled.
[    0.000000]  Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 20971520 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2199.702 MHz processor.
[    0.002005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.40 BogoMIPS (lpj=2199702)
[    0.002010] pid_max: default: 32768 minimum: 301
[    0.002108] Security Framework initialized
[    0.002131] AppArmor: AppArmor initialized
[    0.002394] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.004422] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.005090] Mount-cache hash table entries: 256
[    0.005252] Initializing cgroup subsys ns
[    0.005256] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.005260] Initializing cgroup subsys cpuacct
[    0.005264] Initializing cgroup subsys memory
[    0.005284] Initializing cgroup subsys devices
[    0.005287] Initializing cgroup subsys freezer
[    0.005289] Initializing cgroup subsys net_cls
[    0.005292] Initializing cgroup subsys blkio
[    0.005334] tseg: 007ff00000
[    0.005337] mce: CPU supports 5 MCE banks
[    0.005349] Performance Events: AMD PMU driver.
[    0.005355] ... version:                0
[    0.005357] ... bit width:              48
[    0.005359] ... generic registers:      4
[    0.005361] ... value mask:             0000ffffffffffff
[    0.005363] ... max period:             00007fffffffffff
[    0.005364] ... fixed-purpose events:   0
[    0.005366] ... event mask:             000000000000000f
[    0.005398] SMP alternatives: switching to UP code
[    0.009086] ACPI: Core revision 20101013
[    0.018094] Setting APIC routing to flat
[    0.018998] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.029115] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
[    0.032017] NMI watchdog enabled, takes one hw-pmu counter.
[    0.033054] Brought up 1 CPUs
[    0.033057] Total of 1 processors activated (4399.40 BogoMIPS).
[    0.033417] devtmpfs: initialized
[    0.035005] regulator: core version 0.5
[    0.035065] regulator: dummy: 
[    0.035101] Time: 10:51:46  Date: 11/19/11
[    0.035168] NET: Registered protocol family 16
[    0.035318] node 0 link 0: io port [1000, fffff]
[    0.035322] TOM: 0000000080000000 aka 2048M
[    0.035325] node 0 link 0: mmio [a0000, bffff]
[    0.035328] node 0 link 0: mmio [80000000, ff70ffff]
[    0.035331] bus: [00, ff] on node 0 link 0
[    0.035334] bus: 00 index 0 [io  0x0000-0xffff]
[    0.035337] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.035339] bus: 00 index 2 [mem 0x80000000-0xfcffffffff]
[    0.035419] ACPI: bus type pci registered
[    0.035510] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.035514] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.053727] PCI: Using configuration type 1 for base access
[    0.054959] bio: create slab <bio-0> at 0
[    0.056286] ACPI: EC: Look up EC in DSDT
[    0.064715] ACPI: Interpreter enabled
[    0.064721] ACPI: (supports S0 S1 S3 S4 S5)
[    0.064755] ACPI: Using IOAPIC for interrupt routing
[    0.065345] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[    0.067818] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[    0.067955] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[    0.068317] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[    0.070980] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[    0.071063] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[    0.071143] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[    0.071502] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[    0.071555] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[    0.072687] ACPI: No dock devices found.
[    0.072691] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.072809] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.073060] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.073063] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.073066] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.073068] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.073071] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[    0.073090] pci 0000:00:00.0: [1106:0238] type 0 class 0x000600
[    0.073100] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[    0.073161] pci 0000:00:00.1: [1106:1238] type 0 class 0x000600
[    0.073198] pci 0000:00:00.2: [1106:2238] type 0 class 0x000600
[    0.073235] pci 0000:00:00.3: [1106:3238] type 0 class 0x000600
[    0.073272] pci 0000:00:00.4: [1106:4238] type 0 class 0x000600
[    0.073309] pci 0000:00:00.5: [1106:5238] type 0 class 0x000800
[    0.073363] pci 0000:00:00.7: [1106:7238] type 0 class 0x000600
[    0.073402] pci 0000:00:01.0: [1106:b188] type 1 class 0x000604
[    0.073451] pci 0000:00:02.0: [1106:a238] type 1 class 0x000604
[    0.073503] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.073507] pci 0000:00:02.0: PME# disabled
[    0.073530] pci 0000:00:03.0: [1106:c238] type 1 class 0x000604
[    0.073581] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.073585] pci 0000:00:03.0: PME# disabled
[    0.073608] pci 0000:00:03.1: [1106:d238] type 1 class 0x000604
[    0.073659] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.073662] pci 0000:00:03.1: PME# disabled
[    0.073685] pci 0000:00:03.2: [1106:e238] type 1 class 0x000604
[    0.073736] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[    0.073740] pci 0000:00:03.2: PME# disabled
[    0.073766] pci 0000:00:03.3: [1106:f238] type 1 class 0x000604
[    0.073817] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[    0.073821] pci 0000:00:03.3: PME# disabled
[    0.073855] pci 0000:00:0c.0: [13f6:0111] type 0 class 0x000401
[    0.073870] pci 0000:00:0c.0: reg 10: [io  0xc000-0xc0ff]
[    0.073925] pci 0000:00:0c.0: supports D1 D2
[    0.073944] pci 0000:00:0f.0: [1106:3149] type 0 class 0x000104
[    0.073958] pci 0000:00:0f.0: reg 10: [io  0xc400-0xc407]
[    0.073967] pci 0000:00:0f.0: reg 14: [io  0xc800-0xc803]
[    0.073976] pci 0000:00:0f.0: reg 18: [io  0xcc00-0xcc07]
[    0.073984] pci 0000:00:0f.0: reg 1c: [io  0xd000-0xd003]
[    0.073993] pci 0000:00:0f.0: reg 20: [io  0xd400-0xd40f]
[    0.074006] pci 0000:00:0f.0: reg 24: [io  0xd800-0xd8ff]
[    0.074045] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
[    0.074085] pci 0000:00:0f.1: reg 20: [io  0xdc00-0xdc0f]
[    0.074136] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[    0.074174] pci 0000:00:10.0: reg 20: [io  0xe000-0xe01f]
[    0.074201] pci 0000:00:10.0: supports D1 D2
[    0.074203] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.074207] pci 0000:00:10.0: PME# disabled
[    0.074223] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[    0.074261] pci 0000:00:10.1: reg 20: [io  0xe400-0xe41f]
[    0.074288] pci 0000:00:10.1: supports D1 D2
[    0.074290] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.074294] pci 0000:00:10.1: PME# disabled
[    0.074310] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[    0.074348] pci 0000:00:10.2: reg 20: [io  0xe800-0xe81f]
[    0.074375] pci 0000:00:10.2: supports D1 D2
[    0.074377] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.074381] pci 0000:00:10.2: PME# disabled
[    0.074398] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
[    0.074435] pci 0000:00:10.3: reg 20: [io  0xec00-0xec1f]
[    0.074463] pci 0000:00:10.3: supports D1 D2
[    0.074465] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.074468] pci 0000:00:10.3: PME# disabled
[    0.074485] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
[    0.074499] pci 0000:00:10.4: reg 10: [mem 0xdc000000-0xdc0000ff]
[    0.074550] pci 0000:00:10.4: supports D1 D2
[    0.074552] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.074556] pci 0000:00:10.4: PME# disabled
[    0.074576] pci 0000:00:11.0: [1106:3227] type 0 class 0x000601
[    0.074629] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.074635] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[    0.074670] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
[    0.074684] pci 0000:00:11.5: reg 10: [io  0x0000-0x00ff]
[    0.074738] pci 0000:00:11.5: supports D1 D2
[    0.074756] pci 0000:00:11.6: [1106:3068] type 0 class 0x000780
[    0.074771] pci 0000:00:11.6: reg 10: [io  0x0000-0x00ff]
[    0.074843] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.074862] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.074879] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.074895] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.074917] PCI: peer root bus 00 res updated from pci conf
[    0.074964] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.074969] pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.074973] pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.074977] pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.075031] pci 0000:02:00.0: [1002:954f] type 0 class 0x000300
[    0.075047] pci 0000:02:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.075060] pci 0000:02:00.0: reg 18: [mem 0xd9000000-0xd900ffff 64bit]
[    0.075069] pci 0000:02:00.0: reg 20: [io  0xa000-0xa0ff]
[    0.075084] pci 0000:02:00.0: reg 30: [mem 0xd8000000-0xd801ffff pref]
[    0.075105] pci 0000:02:00.0: supports D1 D2
[    0.075130] pci 0000:02:00.1: [1002:aa38] type 0 class 0x000403
[    0.075145] pci 0000:02:00.1: reg 10: [mem 0xd9010000-0xd9013fff 64bit]
[    0.075198] pci 0000:02:00.1: supports D1 D2
[    0.077018] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[    0.077022] pci 0000:00:02.0:   bridge window [io  0xa000-0xafff]
[    0.077026] pci 0000:00:02.0:   bridge window [mem 0xd8000000-0xd9ffffff]
[    0.077030] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
[    0.077067] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[    0.077071] pci 0000:00:03.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.077076] pci 0000:00:03.0:   bridge window [mem 0x00000000-0x000fffff] (disabled)
[    0.077080] pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.077117] pci 0000:00:03.1: PCI bridge to [bus 04-04]
[    0.077121] pci 0000:00:03.1:   bridge window [io  0xf000-0x0000] (disabled)
[    0.077125] pci 0000:00:03.1:   bridge window [mem 0x00000000-0x000fffff] (disabled)
[    0.077130] pci 0000:00:03.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.077186] pci 0000:05:00.0: [11ab:4362] type 0 class 0x000200
[    0.077206] pci 0000:05:00.0: reg 10: [mem 0xdb000000-0xdb003fff 64bit]
[    0.077217] pci 0000:05:00.0: reg 18: [io  0xb000-0xb0ff]
[    0.077253] pci 0000:05:00.0: reg 30: [mem 0xda000000-0xda01ffff pref]
[    0.077287] pci 0000:05:00.0: supports D1 D2
[    0.077289] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.077293] pci 0000:05:00.0: PME# disabled
[    0.077306] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.077315] pci 0000:00:03.2: PCI bridge to [bus 05-05]
[    0.077319] pci 0000:00:03.2:   bridge window [io  0xb000-0xbfff]
[    0.077323] pci 0000:00:03.2:   bridge window [mem 0xda000000-0xdbffffff]
[    0.077327] pci 0000:00:03.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.077365] pci 0000:00:03.3: PCI bridge to [bus 06-06]
[    0.077369] pci 0000:00:03.3:   bridge window [io  0xf000-0x0000] (disabled)
[    0.077374] pci 0000:00:03.3:   bridge window [mem 0x00000000-0x000fffff] (disabled)
[    0.077378] pci 0000:00:03.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.077407] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.077749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
[    0.077813] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.077867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    0.077919] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[    0.077981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.142528] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.142671] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[    0.142788] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.142905] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.143022] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.143127] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.143230] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.143352] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
[    0.143508] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[    0.143650] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[    0.143792] ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled.
[    0.143975] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
[    0.143993] HEST: Table is not found!
[    0.144247] SCSI subsystem initialized
[    0.144327] libata version 3.00 loaded.
[    0.144426] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.144430] vgaarb: loaded
[    0.144465] usbcore: registered new interface driver usbfs
[    0.144483] usbcore: registered new interface driver hub
[    0.144515] usbcore: registered new device driver usb
[    0.144608] PCI: Using ACPI for IRQ routing
[    0.144612] PCI: pci_cache_line_size set to 64 bytes
[    0.144717] reserve RAM buffer: 000000000009f000 - 000000000009ffff 
[    0.144720] reserve RAM buffer: 000000007fee0000 - 000000007fffffff 
[    0.144846] NetLabel: Initializing
[    0.144849] NetLabel:  domain hash size = 128
[    0.144850] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.144865] NetLabel:  unlabeled traffic allowed by default
[    0.146520] AppArmor: AppArmor Filesystem Enabled
[    0.146540] pnp: PnP ACPI init
[    0.146570] ACPI: bus type pnp registered
[    0.146756] pnp 00:00: [bus 00-ff]
[    0.146759] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.146764] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.146766] pnp 00:00: [io  0x0d00-0xffff window]
[    0.146769] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.146771] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.146773] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[    0.146866] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.146897] pnp 00:01: [io  0x4000-0x407f]
[    0.146900] pnp 00:01: [io  0x5000-0x500f]
[    0.146978] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.147927] pnp 00:02: [io  0x0010-0x001f]
[    0.147930] pnp 00:02: [io  0x0022-0x003f]
[    0.147932] pnp 00:02: [io  0x0044-0x005f]
[    0.147934] pnp 00:02: [io  0x0062-0x0063]
[    0.147936] pnp 00:02: [io  0x0065-0x006f]
[    0.147938] pnp 00:02: [io  0x0074-0x007f]
[    0.147940] pnp 00:02: [io  0x0091-0x0093]
[    0.147942] pnp 00:02: [io  0x00a2-0x00bf]
[    0.147944] pnp 00:02: [io  0x00e0-0x00ef]
[    0.147946] pnp 00:02: [io  0x0b78-0x0b7b]
[    0.147948] pnp 00:02: [io  0x0f78-0x0f7b]
[    0.147951] pnp 00:02: [io  0x0a78-0x0a7b]
[    0.147953] pnp 00:02: [io  0x0e78-0x0e7b]
[    0.147955] pnp 00:02: [io  0x0bbc-0x0bbf]
[    0.147957] pnp 00:02: [io  0x0fbc-0x0fbf]
[    0.147959] pnp 00:02: [io  0x04d0-0x04d1]
[    0.147961] pnp 00:02: [io  0x0290-0x0297]
[    0.147992] pnp 00:02: disabling [io  0x0010-0x001f] because it overlaps 0000:00:11.5 BAR 0 [io  0x0000-0x00ff]
[    0.148003] pnp 00:02: disabling [io  0x0022-0x003f] because it overlaps 0000:00:11.5 BAR 0 [io  0x0000-0x00ff]
[    0.148007] pnp 00:02: disabling [io  0x0044-0x005f] because it overlaps 0000:00:11.5 BAR 0 [io  0x0000-0x00ff]
[    0.148010] pnp 00:02: disabling [io  0x0062-0x0063] because it overlaps 0000:00:11.5 BAR 0 [io  0x0000-0x00ff]
[    0.148013] pnp 00:02: disabling [io  0x0065-0x006f] because it overlaps 0000:00:11.5 BAR 0 [io  0x0000-0x00ff]
[    0.148017] pnp 00:02: disabling [io  0x0074-0x007f] because it overlaps 0000:00:11.5 BAR 0 [io  0x0000-0x00ff]
[    0.148020] pnp 00:02: disabling [io  0x0091-0x0093] because it overlaps 0000:00:11.5 BAR 0 [io  0x0000-0x00ff]
[    0.148023] pnp 00:02: disabling [io  0x00a2-0x00bf] because it overlaps 0000:00:11.5 BAR 0 [io  0x0000-0x00ff]
[    0.148026] pnp 00:02: disabling [io  0x00e0-0x00ef] because it overlaps 0000:00:11.5 BAR 0 [io  0x0000-0x00ff]
[    0.148031] pnp 00:02: disabling [io  0x0010-0x001f disabled] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    0.148035] pnp 00:02: disabling [io  0x0022-0x003f disabled] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    0.148038] pnp 00:02: disabling [io  0x0044-0x005f disabled] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    0.148042] pnp 00:02: disabling [io  0x0062-0x0063 disabled] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    0.148046] pnp 00:02: disabling [io  0x0065-0x006f disabled] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    0.148049] pnp 00:02: disabling [io  0x0074-0x007f disabled] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    0.148053] pnp 00:02: disabling [io  0x0091-0x0093 disabled] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    0.148056] pnp 00:02: disabling [io  0x00a2-0x00bf disabled] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    0.148060] pnp 00:02: disabling [io  0x00e0-0x00ef disabled] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    0.148119] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.148136] pnp 00:03: [dma 4]
[    0.148139] pnp 00:03: [io  0x0000-0x000f]
[    0.148141] pnp 00:03: [io  0x0080-0x0090]
[    0.148143] pnp 00:03: [io  0x0094-0x009f]
[    0.148145] pnp 00:03: [io  0x00c0-0x00df]
[    0.148198] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.148213] pnp 00:04: [io  0x0070-0x0073]
[    0.148228] pnp 00:04: [irq 8]
[    0.148281] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.148293] pnp 00:05: [io  0x0061]
[    0.148347] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.148360] pnp 00:06: [io  0x00f0-0x00ff]
[    0.148366] pnp 00:06: [irq 13]
[    0.148423] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.148597] pnp 00:07: [io  0x03f0-0x03f5]
[    0.148600] pnp 00:07: [io  0x03f7]
[    0.148605] pnp 00:07: [irq 6]
[    0.148607] pnp 00:07: [dma 2]
[    0.148682] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.148943] pnp 00:08: [io  0x03f8-0x03ff]
[    0.148949] pnp 00:08: [irq 4]
[    0.149041] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.149718] pnp 00:09: [io  0x0378-0x037f]
[    0.149721] pnp 00:09: [io  0x0778-0x077b]
[    0.149726] pnp 00:09: [irq 7]
[    0.149729] pnp 00:09: [dma 3]
[    0.149820] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.149908] pnp 00:0a: [io  0x0060]
[    0.149910] pnp 00:0a: [io  0x0064]
[    0.149916] pnp 00:0a: [irq 12]
[    0.149975] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.150378] pnp 00:0b: [io  0x0201-0x0207]
[    0.150381] pnp 00:0b: [io  0x0200]
[    0.150453] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.150727] pnp 00:0c: [io  0x0330-0x0331]
[    0.150733] pnp 00:0c: [irq 10]
[    0.150816] pnp 00:0c: Plug and Play ACPI device, IDs PNPb006 (active)
[    0.150846] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[    0.150932] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.151241] pnp 00:0e: [mem 0x000d5000-0x000d7fff]
[    0.151243] pnp 00:0e: [mem 0x000f0000-0x000f7fff]
[    0.151246] pnp 00:0e: [mem 0x000f8000-0x000fbfff]
[    0.151248] pnp 00:0e: [mem 0x000fc000-0x000fffff]
[    0.151251] pnp 00:0e: [mem 0x7fef0000-0x7ffeffff]
[    0.151254] pnp 00:0e: [mem 0x7fee0000-0x7fefffff]
[    0.151256] pnp 00:0e: [mem 0xffff0000-0xffffffff]
[    0.151258] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[    0.151261] pnp 00:0e: [mem 0x00100000-0x7fedffff]
[    0.151263] pnp 00:0e: [mem 0xfec00000-0xfec00fff]
[    0.151265] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
[    0.151268] pnp 00:0e: [mem 0xfff80000-0xfffeffff]
[    0.151361] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.151374] pnp: PnP ACPI: found 15 devices
[    0.151375] ACPI: ACPI bus type pnp unregistered

Opensource Anhänger · 19 Nov. 2011

Zweiter Teil

Code:

[    0.151389] system 00:01: [io  0x4000-0x407f] has been reserved
[    0.151392] system 00:01: [io  0x5000-0x500f] has been reserved
[    0.151398] system 00:02: [io  0x0b78-0x0b7b] has been reserved
[    0.151401] system 00:02: [io  0x0f78-0x0f7b] has been reserved
[    0.151404] system 00:02: [io  0x0a78-0x0a7b] has been reserved
[    0.151406] system 00:02: [io  0x0e78-0x0e7b] has been reserved
[    0.151409] system 00:02: [io  0x0bbc-0x0bbf] has been reserved
[    0.151412] system 00:02: [io  0x0fbc-0x0fbf] has been reserved
[    0.151415] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.151417] system 00:02: [io  0x0290-0x0297] has been reserved
[    0.151426] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[    0.151431] system 00:0e: [mem 0x000d5000-0x000d7fff] has been reserved
[    0.151434] system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.151437] system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.151440] system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.151443] system 00:0e: [mem 0x7fef0000-0x7ffeffff] could not be reserved
[    0.151446] system 00:0e: [mem 0x7fee0000-0x7fefffff] could not be reserved
[    0.151449] system 00:0e: [mem 0xffff0000-0xffffffff] has been reserved
[    0.151453] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.151456] system 00:0e: [mem 0x00100000-0x7fedffff] could not be reserved
[    0.151459] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.151462] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.151465] system 00:0e: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.158885] Switching to clocksource acpi_pm
[    0.158963] pci 0000:00:03.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[    0.158967] pci 0000:00:03.0: BAR 15: assigned [mem 0x80200000-0x803fffff pref]
[    0.158971] pci 0000:00:03.1: BAR 14: assigned [mem 0x80400000-0x805fffff]
[    0.158974] pci 0000:00:03.1: BAR 15: assigned [mem 0x80600000-0x807fffff pref]
[    0.158978] pci 0000:00:03.2: BAR 15: assigned [mem 0x80800000-0x809fffff pref]
[    0.158982] pci 0000:00:03.3: BAR 14: assigned [mem 0x80a00000-0x80bfffff]
[    0.158985] pci 0000:00:03.3: BAR 15: assigned [mem 0x80c00000-0x80dfffff pref]
[    0.158990] pci 0000:00:03.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.158993] pci 0000:00:03.1: BAR 13: assigned [io  0x2000-0x2fff]
[    0.158996] pci 0000:00:03.3: BAR 13: assigned [io  0x3000-0x3fff]
[    0.158996] pci 0000:00:11.5: BAR 0: assigned [io  0x4400-0x44ff]
[    0.158996] pci 0000:00:11.5: BAR 0: set to [io  0x4400-0x44ff] (PCI address [0x4400-0x44ff])
[    0.158996] pci 0000:00:11.6: BAR 0: assigned [io  0x4800-0x48ff]
[    0.158996] pci 0000:00:11.6: BAR 0: set to [io  0x4800-0x48ff] (PCI address [0x4800-0x48ff])
[    0.158996] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.158996] pci 0000:00:01.0:   bridge window [io  disabled]
[    0.158996] pci 0000:00:01.0:   bridge window [mem disabled]
[    0.158996] pci 0000:00:01.0:   bridge window [mem pref disabled]
[    0.158996] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[    0.158996] pci 0000:00:02.0:   bridge window [io  0xa000-0xafff]
[    0.158996] pci 0000:00:02.0:   bridge window [mem 0xd8000000-0xd9ffffff]
[    0.158996] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
[    0.158996] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[    0.158996] pci 0000:00:03.0:   bridge window [io  0x1000-0x1fff]
[    0.158996] pci 0000:00:03.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.158996] pci 0000:00:03.0:   bridge window [mem 0x80200000-0x803fffff pref]
[    0.158996] pci 0000:00:03.1: PCI bridge to [bus 04-04]
[    0.158996] pci 0000:00:03.1:   bridge window [io  0x2000-0x2fff]
[    0.158996] pci 0000:00:03.1:   bridge window [mem 0x80400000-0x805fffff]
[    0.158996] pci 0000:00:03.1:   bridge window [mem 0x80600000-0x807fffff pref]
[    0.158996] pci 0000:00:03.2: PCI bridge to [bus 05-05]
[    0.158996] pci 0000:00:03.2:   bridge window [io  0xb000-0xbfff]
[    0.158996] pci 0000:00:03.2:   bridge window [mem 0xda000000-0xdbffffff]
[    0.158996] pci 0000:00:03.2:   bridge window [mem 0x80800000-0x809fffff pref]
[    0.158996] pci 0000:00:03.3: PCI bridge to [bus 06-06]
[    0.158996] pci 0000:00:03.3:   bridge window [io  0x3000-0x3fff]
[    0.158996] pci 0000:00:03.3:   bridge window [mem 0x80a00000-0x80bfffff]
[    0.158996] pci 0000:00:03.3:   bridge window [mem 0x80c00000-0x80dfffff pref]
[    0.158996] pci 0000:00:01.0: setting latency timer to 64
[    0.158996] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[    0.158996] pci 0000:00:02.0: setting latency timer to 64
[    0.158996] pci 0000:00:03.0: enabling device (0100 -> 0103)
[    0.158996] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[    0.158996] pci 0000:00:03.0: setting latency timer to 64
[    0.158996] pci 0000:00:03.1: enabling device (0100 -> 0103)
[    0.158996] pci 0000:00:03.1: PCI INT B -> GSI 35 (level, low) -> IRQ 35
[    0.158996] pci 0000:00:03.1: setting latency timer to 64
[    0.158996] pci 0000:00:03.2: PCI INT C -> GSI 39 (level, low) -> IRQ 39
[    0.158996] pci 0000:00:03.2: setting latency timer to 64
[    0.158996] pci 0000:00:03.3: enabling device (0100 -> 0103)
[    0.158996] pci 0000:00:03.3: PCI INT D -> GSI 43 (level, low) -> IRQ 43
[    0.158996] pci 0000:00:03.3: setting latency timer to 64
[    0.158996] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.158996] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.158996] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff]
[    0.158996] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[    0.158996] pci_bus 0000:02: resource 1 [mem 0xd8000000-0xd9ffffff]
[    0.158996] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff pref]
[    0.158996] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.158996] pci_bus 0000:03: resource 1 [mem 0x80000000-0x801fffff]
[    0.158996] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff pref]
[    0.158996] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.158996] pci_bus 0000:04: resource 1 [mem 0x80400000-0x805fffff]
[    0.158996] pci_bus 0000:04: resource 2 [mem 0x80600000-0x807fffff pref]
[    0.158996] pci_bus 0000:05: resource 0 [io  0xb000-0xbfff]
[    0.158996] pci_bus 0000:05: resource 1 [mem 0xda000000-0xdbffffff]
[    0.158996] pci_bus 0000:05: resource 2 [mem 0x80800000-0x809fffff pref]
[    0.158996] pci_bus 0000:06: resource 0 [io  0x3000-0x3fff]
[    0.158996] pci_bus 0000:06: resource 1 [mem 0x80a00000-0x80bfffff]
[    0.158996] pci_bus 0000:06: resource 2 [mem 0x80c00000-0x80dfffff pref]
[    0.158996] NET: Registered protocol family 2
[    0.158996] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.159755] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.162305] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.162921] TCP: Hash tables configured (established 262144 bind 65536)
[    0.162924] TCP reno registered
[    0.162937] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.162968] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.163158] NET: Registered protocol family 1
[    0.163191] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.163197] pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled
[    0.163313] pci 0000:02:00.0: Boot video device
[    0.163321] PCI: CLS 32 bytes, default 64
[    0.163389] Unpacking initramfs...
[    0.378562] Freeing initrd memory: 11136k freed
[    0.386026] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0238]
[    0.391569] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[    0.392020] audit: initializing netlink socket (disabled)
[    0.392035] type=2000 audit(1321699906.391:1): initialized
[    0.407448] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.407721] VFS: Disk quotas dquot_6.5.2
[    0.407760] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.407925] msgmni has been set to 1002
[    0.408143] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.408169] io scheduler noop registered
[    0.408171] io scheduler deadline registered
[    0.408192] io scheduler cfq registered (default)
[    0.414394] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010980000, using 3072k, total 16384k
[    0.414398] vesafb: mode is 1024x768x16, linelength=2048, pages=9
[    0.414400] vesafb: scrolling: redraw
[    0.414403] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.415439] bootsplash 3.1.6-2004/03/31: looking for picture...
[    0.415444] bootsplash: silentjpeg size 172445 bytes
[    0.432585] bootsplash: ...found (1024x768, 167501 bytes, v3).
[    0.433088] bootsplash: silentjpeg size 241091 bytes
[    0.508203] Console: switching to colour frame buffer device 124x44
[    0.554757] fb0: VESA VGA frame buffer device
[    0.554814] ERST: Table is not found!
[    0.555088] Non-volatile memory driver v1.3
[    0.555090] Linux agpgart interface v0.103
[    0.555150] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.575637] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.626561] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.630262] Fixed MDIO Bus: probed
[    0.630269] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.631229] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[    0.631243] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.631264] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    0.631294] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    0.632074] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdc000000
[    0.638015] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    0.638049] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.638052] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.638055] usb usb1: Product: EHCI Host Controller
[    0.638057] usb usb1: Manufacturer: Linux 2.6.37.6-0.9-desktop ehci_hcd
[    0.638060] usb usb1: SerialNumber: 0000:00:10.4
[    0.638190] hub 1-0:1.0: USB hub found
[    0.638195] hub 1-0:1.0: 8 ports detected
[    0.638297] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.638313] uhci_hcd: USB Universal Host Controller Interface driver
[    0.639021] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.639032] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    0.639040] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    0.641025] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000
[    0.641058] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.641061] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.641063] usb usb2: Product: UHCI Host Controller
[    0.641065] usb usb2: Manufacturer: Linux 2.6.37.6-0.9-desktop uhci_hcd
[    0.641067] usb usb2: SerialNumber: 0000:00:10.0
[    0.641177] hub 2-0:1.0: USB hub found
[    0.641181] hub 2-0:1.0: 2 ports detected
[    0.642020] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.642027] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    0.642036] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    0.644024] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e400
[    0.644058] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.644061] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.644063] usb usb3: Product: UHCI Host Controller
[    0.644065] usb usb3: Manufacturer: Linux 2.6.37.6-0.9-desktop uhci_hcd
[    0.644068] usb usb3: SerialNumber: 0000:00:10.1
[    0.644169] hub 3-0:1.0: USB hub found
[    0.644173] hub 3-0:1.0: 2 ports detected
[    0.645018] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.645025] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    0.645034] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    0.647024] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
[    0.647057] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.647060] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.647062] usb usb4: Product: UHCI Host Controller
[    0.647064] usb usb4: Manufacturer: Linux 2.6.37.6-0.9-desktop uhci_hcd
[    0.647066] usb usb4: SerialNumber: 0000:00:10.2
[    0.647174] hub 4-0:1.0: USB hub found
[    0.647177] hub 4-0:1.0: 2 ports detected
[    0.648019] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.648026] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    0.648033] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    0.650024] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ec00
[    0.650059] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.650061] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.650064] usb usb5: Product: UHCI Host Controller
[    0.650066] usb usb5: Manufacturer: Linux 2.6.37.6-0.9-desktop uhci_hcd
[    0.650068] usb usb5: SerialNumber: 0000:00:10.3
[    0.650167] hub 5-0:1.0: USB hub found
[    0.650171] hub 5-0:1.0: 2 ports detected
[    0.650255] Initializing USB Mass Storage driver...
[    0.650288] usbcore: registered new interface driver usb-storage
[    0.650290] USB Mass Storage support registered.
[    0.650302] usbcore: registered new interface driver ums-alauda
[    0.650314] usbcore: registered new interface driver ums-cypress
[    0.650327] usbcore: registered new interface driver ums-datafab
[    0.650340] usbcore: registered new interface driver ums-freecom
[    0.650352] usbcore: registered new interface driver ums-isd200
[    0.650365] usbcore: registered new interface driver ums-jumpshot
[    0.650377] usbcore: registered new interface driver ums-karma
[    0.650389] usbcore: registered new interface driver ums-onetouch
[    0.650401] usbcore: registered new interface driver ums-sddr09
[    0.650414] usbcore: registered new interface driver ums-sddr55
[    0.650426] usbcore: registered new interface driver ums-usbat
[    0.650477] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[    0.650480] PNP: PS/2 controller doesn't have KBD irq; using default 1
[    0.650988] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.650993] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.651101] mice: PS/2 mouse device common for all mice
[    0.651230] rtc_cmos 00:04: RTC can wake from S4
[    0.653072] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.653124] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    0.653137] cpuidle: using governor ladder
[    0.653139] cpuidle: using governor menu
[    0.653443] usbcore: registered new interface driver usbhid
[    0.653445] usbhid: USB HID core driver
[    0.653782] TCP cubic registered
[    0.653843] NET: Registered protocol family 10
[    0.654345] lo: Disabled Privacy Extensions
[    0.654664] lib80211: common routines for IEEE802.11 drivers
[    0.654667] lib80211_crypt: registered algorithm 'NULL'
[    0.654669] Registering the dns_resolver key type
[    0.654721] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
[    0.654873] PM: Checking hibernation image partition /dev/disk/by-id/ata-WDC_WD2500JB-19GVA0_WD-WCAL73573703-part5
[    0.992696] input: PS2++ Logitech MX Mouse as /devices/platform/i8042/serio1/input/input0
[    0.995640] PM: Hibernation image not present or could not be loaded.
[    0.995661] registered taskstats version 1
[    0.996034]   Magic number: 3:856:881
[    0.996130] rtc_cmos 00:04: setting system clock to 2011-11-19 10:51:47 UTC (1321699907)
[    0.996231] Freeing unused kernel memory: 936k freed
[    0.996694] Write protecting the kernel read-only data: 10240k
[    0.996870] Freeing unused kernel memory: 816k freed
[    0.997445] Freeing unused kernel memory: 328k freed
[    1.045016] sata_via 0000:00:0f.0: version 2.6
[    1.045235] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[    1.045249] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[    1.045283] sata_via 0000:00:0f.0: routed to hard irq line 11
[    1.045611] scsi0 : sata_via
[    1.045728] scsi1 : sata_via
[    1.047078] ata1: SATA max UDMA/133 cmd 0xc400 ctl 0xc800 bmdma 0xd400 irq 20
[    1.047081] ata2: SATA max UDMA/133 cmd 0xcc00 ctl 0xd000 bmdma 0xd408 irq 20
[    1.093022] usb 1-8: new high speed USB device using ehci_hcd and address 4
[    1.209222] usb 1-8: New USB device found, idVendor=058f, idProduct=6387
[    1.209225] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.209227] usb 1-8: Product: USB colorline
[    1.209229] usb 1-8: Manufacturer: takeMS
[    1.209231] usb 1-8: SerialNumber: 7B4AA5FD
[    1.209559] scsi2 : usb-storage 1-8:1.0
[    1.248013] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.402209] ata1.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100
[    1.408204] ata1.00: configured for UDMA/100
[    1.413489] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH20NS15  IL00 PQ: 0 ANSI: 5
[    1.415013] usb 2-2: new low speed USB device using uhci_hcd and address 2
[    1.579942] usb 2-2: New USB device found, idVendor=046d, idProduct=c31a
[    1.579944] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.579947] usb 2-2: Product: USB Multimedia Keyboard
[    1.579949] usb 2-2: Manufacturer: Logitech
[    1.599115] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input1
[    1.599205] generic-usb 0003:046D:C31A.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Multimedia Keyboard] on usb-0000:00:10.0-2/input0
[    1.614016] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.639036] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/input/input2
[    1.639118] generic-usb 0003:046D:C31A.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Multimedia Keyboard] on usb-0000:00:10.0-2/input1
[    1.768301] ata2.00: ATA-8: SAMSUNG HD403LJ, CT100-10, max UDMA7
[    1.768307] ata2.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.771290] ata2.00: configured for UDMA/133
[    1.771393] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD403LJ  CT10 PQ: 0 ANSI: 5
[    1.771605] sd 1:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[    1.771648] sd 1:0:0:0: [sda] Write Protect is off
[    1.771651] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.771670] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.783749]  sda: sda1 sda2
[    1.783955] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.788018] pata_via 0000:00:0f.1: version 0.3.4
[    1.788038] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[    1.788586] scsi3 : pata_via
[    1.788663] scsi4 : pata_via
[    1.790187] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xdc00 irq 14
[    1.790190] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xdc08 irq 15
[    1.845017] usb 3-2: new full speed USB device using uhci_hcd and address 2
[    1.983895] usb 3-2: New USB device found, idVendor=03eb, idProduct=0902
[    1.983898] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.986928] hub 3-2:1.0: USB hub found
[    1.988892] hub 3-2:1.0: 4 ports detected
[    2.209750] scsi 2:0:0:0: Direct-Access     takeMS   USB colorline    8.07 PQ: 0 ANSI: 2
[    2.211481] sd 2:0:0:0: [sdb] 8044544 512-byte logical blocks: (4.11 GB/3.83 GiB)
[    2.211978] sd 2:0:0:0: [sdb] Write Protect is off
[    2.211981] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    2.211983] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    2.214103] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    2.250502] ata3.00: ATAPI: PLEXTOR DVD-ROM PX-116A2            0100, 1.00, max UDMA/66
[    2.250508] ata3.00: limited to UDMA/33 due to 40-wire cable
[    2.256338] ata3.00: configured for UDMA/33
[    2.259504] scsi 3:0:0:0: CD-ROM            PLEXTOR  DVD-ROM PX-116A2 1.00 PQ: 0 ANSI: 5
[    2.414668] ata4.00: ATA-6: WDC WD2500JB-19GVA0, 08.02D08, max UDMA/100
[    2.414671] ata4.00: 488397168 sectors, multi 16: LBA48 
[    2.414675] ata4.00: limited to UDMA/33 due to 40-wire cable
[    2.421517] ata4.00: configured for UDMA/33
[    2.432064] scsi 4:0:0:0: Direct-Access     ATA      WDC WD2500JB-19G 08.0 PQ: 0 ANSI: 5
[    2.432253] sd 4:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.432296] sd 4:0:0:0: [sdc] Write Protect is off
[    2.432300] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.432320] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.435381]  sdb:
[    2.436482] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    2.436492] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    2.490522]  sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 sdc7 sdc8 >
[    2.490903] sd 4:0:0:0: [sdc] Attached SCSI disk
[    2.496405] thermal LNXTHERM:00: registered as thermal_zone0
[    2.496410] ACPI: Thermal Zone [THRM] (17 C)
[    2.505589] ACPI: acpi_idle registered with cpuidle
[    2.508239] ACPI: Fan [FAN] (on)
[    2.549198] udev[105]: starting version 166
[    3.661271] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[    3.661276] PM: Basic memory bitmaps created
[    3.682930] PM: Basic memory bitmaps freed
[    3.796828] PM: Starting manual resume from disk
[    3.796833] PM: Hibernation image partition 8:37 present
[    3.796834] PM: Looking for hibernation image.
[    3.797118] PM: Image not found (code -22)
[    3.797120] PM: Hibernation image not present or could not be loaded.
[    3.892748] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[    3.981745] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr
[    5.671980] preloadtrace: systemtap: 1.4/0.149, base: ffffffffa00e5000, memory: 43data/41text/13ctx/13net/397alloc kb, probes: 44
[    6.496214] udev[436]: starting version 166
[    6.926360] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    6.926428] ACPI: Power Button [PWRB]
[    6.926506] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    6.926543] ACPI: Power Button [PWRF]
[    7.003934] MCE: In-kernel MCE decoding enabled.
[    7.048818] EDAC MC: Ver: 2.1.0 Oct 26 2011
[    7.053921] Floppy drive(s): fd0 is 1.44M
[    7.076032] ACPI: resource vt596_smbus [io  0x5000-0x5007] conflicts with ACPI region SM06 [io  0x5006 64bit disabled]
[    7.076037] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.083450] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    7.086970] FDC 0 is a post-1991 82077
[    7.154251] parport_pc 00:09: reported by Plug and Play ACPI
[    7.154301] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[    7.203379] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[    7.203509] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    7.203592] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    7.203671] scsi 3:0:0:0: Attached scsi generic sg3 type 5
[    7.204722] sd 4:0:0:0: Attached scsi generic sg4 type 0
[    7.265844] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    7.281743] ppdev: user-space parallel port driver
[    7.310681] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 812kHz
[    7.331882] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    7.331888] cdrom: Uniform CD-ROM driver Revision: 3.20
[    7.332085] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    7.333749] sr1: scsi3-mmc drive: 32x/48x cd/rw xa/form2 cdda tray
[    7.333897] sr 3:0:0:0: Attached scsi CD-ROM sr1
[    7.353516] EDAC amd64_edac:  Ver: 3.3.0 Oct 26 2011
[    7.366056] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.371509] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[    7.371515] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    7.371517]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    7.371518]  (Note that use of the override may cause unknown side effects.)
[    7.371552] amd64_edac: probe of 0000:00:18.2 failed with error -22
[    7.585041] sky2: driver version 1.28
[    7.587545] sky2 0000:05:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[    7.587561] sky2 0000:05:00.0: setting latency timer to 64
[    7.587565] sky2 0000:05:00.0: PCI: Disallowing DAC for device
[    7.587602] sky2 0000:05:00.0: Yukon-2 EC chip revision 2
[    7.587707] sky2 0000:05:00.0: irq 64 for MSI/MSI-X
[    7.687022] sky2 0000:05:00.0: No interrupt generated using MSI, switching to INTx mode.
[    7.687685] sky2 0000:05:00.0: eth0: addr 00:1a:92:61:e0:fb
[    8.048712] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001)
[    8.048884] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[    8.048898] VIA 82xx Modem 0000:00:11.6: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[    8.075051] HDA Intel 0000:02:00.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25
[    8.075058] ALSA hda_intel.c:2398: Using LPIB position fix
[    8.075111] HDA Intel 0000:02:00.1: setting latency timer to 64
[    8.075120] HDA Intel 0000:02:00.1: PCI: Disallowing DAC for device
[    8.079051] ALSA hda_intel.c:1488: Enable sync_write for stable communication
[    8.799021] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
[    9.300252] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
[    9.300302] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[    9.302050] VIA 82xx Audio 0000:00:11.5: enabling device (0000 -> 0001)
[    9.302061] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[    9.302219] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[    9.824094] C-Media PCI 0000:00:0c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   10.016318] usbcore: registered new interface driver snd-usb-audio
[   10.053136] Adding 2104476k swap on /dev/sdc5.  Priority:-1 extents:1 across:2104476k 
[   10.938495] device-mapper: uevent: version 1.0.3
[   10.939179] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[   11.686206] kjournald starting.  Commit interval 15 seconds
[   11.686388] EXT3-fs (sda2): using internal journal
[   11.686392] EXT3-fs (sda2): mounted filesystem with ordered data mode
[   11.734415] fuse init (API version 7.15)
[   13.539624] type=1400 audit(1321696320.040:2): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=1023 comm="apparmor_parser"
[   13.631628] type=1400 audit(1321696320.132:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=1028 comm="apparmor_parser"
[   13.846586] type=1400 audit(1321696320.347:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=1032 comm="apparmor_parser"
[   14.044296] type=1400 audit(1321696320.545:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=1036 comm="apparmor_parser"
[   14.853075] type=1400 audit(1321696321.354:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=1041 comm="apparmor_parser"
[   14.853449] type=1400 audit(1321696321.354:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=1041 comm="apparmor_parser"
[   14.853637] type=1400 audit(1321696321.354:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=1041 comm="apparmor_parser"
[   14.853892] type=1400 audit(1321696321.354:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=1041 comm="apparmor_parser"
[   15.088704] type=1400 audit(1321696321.589:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/deliver" pid=1045 comm="apparmor_parser"
[   15.275087] type=1400 audit(1321696321.776:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/dovecot-auth" pid=1049 comm="apparmor_parser"
[   18.696479] audit_printk_skb: 36 callbacks suppressed
[   18.696483] type=1400 audit(1321696325.197:24): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=1101 comm="apparmor_parser"
[   18.901647] type=1400 audit(1321696325.402:25): apparmor="STATUS" operation="profile_load" name="/usr/sbin/smbd" pid=1105 comm="apparmor_parser"
[   19.035869] type=1400 audit(1321696325.536:26): apparmor="STATUS" operation="profile_load" name="/usr/sbin/traceroute" pid=1109 comm="apparmor_parser"
[   19.786696] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   19.952982] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ (1 cpu cores) (version 2.20.00)
[   19.953209] powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x8
[   19.953212] powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x8
[   19.953214] powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xa
[   19.953217] powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
[   19.975590] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   20.018969] ip_tables: (C) 2000-2006 Netfilter Core Team
[   20.534017] Clocksource tsc unstable (delta = -217778924 ns)
[   22.224323] [drm] Initialized drm 1.1.0 20060810
[   22.351620] [drm] radeon defaulting to kernel modesetting.
[   22.351625] [drm] radeon kernel modesetting enabled.
[   22.352210] checking generic (c0000000 1000000) vs hw (c0000000 10000000)
[   22.352214] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[   22.352260] Console: switching to colour dummy device 80x25
[   22.353723] radeon 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[   22.353730] radeon 0000:02:00.0: setting latency timer to 64
[   22.361616] [drm] initializing kernel modesetting (RV710 0x1002:0x954F).
[   22.362785] radeon 0000:02:00.0: PCI: Disallowing DAC for device
[   22.362790] radeon: No suitable DMA available.
[   22.362830] [drm] register mmio base: 0xD9000000
[   22.362832] [drm] register mmio size: 65536
[   22.363510] ATOM BIOS: 113
[   22.363550] radeon 0000:02:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[   22.363554] radeon 0000:02:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[   22.363655] [drm] Detected VRAM RAM=512M, BAR=256M
[   22.363660] [drm] RAM width 64bits DDR
[   22.363760] [TTM] Zone  kernel: Available graphics memory: 1027226 kiB.
[   22.363763] [TTM] Initializing pool allocator.
[   22.363785] [drm] radeon: 512M of VRAM memory ready
[   22.363788] [drm] radeon: 512M of GTT memory ready.
[   22.363863] [drm] radeon: irq initialized.
[   22.363866] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   22.369821] [drm] Loading RV710 Microcode
[   22.432291] radeon 0000:02:00.0: WB enabled
[   22.495215] [drm] ring test succeeded in 1 usecs
[   22.495419] [drm] radeon: ib pool ready.
[   22.495526] [drm] ib test succeeded in 0 usecs
[   22.495529] [drm] Enabling audio support
[   22.495963] [drm] Radeon Display Connectors
[   22.495965] [drm] Connector 0:
[   22.495967] [drm]   VGA
[   22.495970] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   22.495972] [drm]   Encoders:
[   22.495974] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   22.495976] [drm] Connector 1:
[   22.495977] [drm]   HDMI-A
[   22.495979] [drm]   HPD1
[   22.495981] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[   22.495984] [drm]   Encoders:
[   22.495985] [drm]     DFP1: INTERNAL_UNIPHY
[   22.495987] [drm] Connector 2:
[   22.495989] [drm]   DVI-I
[   22.495990] [drm]   HPD4
[   22.495993] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[   22.495995] [drm]   Encoders:
[   22.495996] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   22.495998] [drm]     DFP2: INTERNAL_UNIPHY2
[   22.633169] [drm] Internal thermal controller with fan control
[   22.633957] [drm] radeon: power management initialized
[   22.716173] [drm] fb mappable at 0xC0142000
[   22.716176] [drm] vram apper at 0xC0000000
[   22.716178] [drm] size 5300224
[   22.716180] [drm] fb depth is 24
[   22.716181] [drm]    pitch is 5888
[   22.718254] Console: switching to colour frame buffer device 180x56
[   22.718267] fb0: radeondrmfb frame buffer device
[   22.718268] drm: registered panic notifier
[   22.718277] [drm] Initialized radeon 2.7.0 20080528 for 0000:02:00.0 on minor 0
[   26.247565] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[   27.187764] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[   29.268395] RPC: Registered udp transport module.
[   29.268400] RPC: Registered tcp transport module.
[   29.268401] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   29.295682] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   29.669356] sky2 0000:05:00.0: eth0: enabling interface
[   29.670472] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   30.187353] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   30.629533] NFSD: starting 90-second grace period
[   31.371472] sky2 0000:05:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[   31.372102] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   31.995179] NET: Registered protocol family 17
[   39.680835] bootsplash: status on console 0 changed to on
[   42.130025] eth0: no IPv6 routers present
[   45.361618] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[   46.289079] EXT3-fs (sdc7): warning: checktime reached, running e2fsck is recommended
[   46.289198] kjournald starting.  Commit interval 15 seconds
[   46.289585] EXT3-fs (sdc7): using internal journal
[   46.289590] EXT3-fs (sdc7): mounted filesystem with ordered data mode
[   46.359380] EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: (null)
[   46.606760] ISO 9660 Extensions: Microsoft Joliet Level 3
[   46.626278] ISOFS: changing to secondary root
[   69.792082] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
[   74.088639] [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID
[   83.366847] i2c i2c-4: sendbytes: NAK bailout.
[   93.439337] [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID
[  103.538390] [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID
[  105.044338] [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID
[  275.771096] [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID
[  285.983994] i2c i2c-4: readbytes: ack/nak timeout
[  285.984073] [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID
[  296.036577] [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID
[  306.060316] i2c i2c-4: sendbytes: NAK bailout.

tomm.fa · 19 Nov. 2011

Opensource Anhänger schrieb:
Zweiter Teil

Bevor es jetzt so weitergeht und noch weitere Teile folgen, nutze für solch lange Ausgaben bitte einen Nopaste Service, oder Pastebin.

Opensource Anhänger · 19 Nov. 2011

Das andere kannte ich noch nicht, und ich kann beruhigen, es kommen keine weiteren Teile.

Anonymous · 19 Nov. 2011

dmesg | grep fglrx hat nichts geliefert

Jetzt sehe ich erst an Deiner neuen Signatur, welchen Treiber Du nutzt. Daß dmesg nichts zurück gab sollte in diesem Fall ok sein.

Allerdings ist mir dieser zB Eintrag in Deiner Ausgabe aufgefallen:

...22.362790] radeon: No suitable DMA available.

Dies könnte durch den closed Source ATI Catalyst Treiber behoben werden.

...5 Jahre altes Profil...

Das könnte natürlich auch eine Fehlerquelle sein. Je nach dem, wie Du das Profil migriert hast, denn im Profil sind natürlich auch die Konfigurationen für u.a. den Desktop abgelegt. Die Migration dieses 5 Jahre alten Profils kam von welcher Suse Version?

An einer übergroßen Vielzahl von Desktopwidgets (oder einfach lastigen Widgets) liegt es aber wohl nicht ...(?)
Bemerkst Du diese Performancelast eigentlich auch beim Arbeiten oder nur wenn Du Messungen vornimmst anhand von Werten (Da Du geschrieben hast es würden ggf Ressourcen frei) ?

Opensource Anhänger · 20 Nov. 2011

Hallo, danke für deine Antwort.
Mit einem closed Source Treiber von ATI habe ich keine gute Erfahrung gemacht.

Ich habe mich an die Anleitung von Sebastian Siebert gehalten. Das hat bei Suse 11.1 auch noch geklappt.
Inzwischen klappt das aber gar nicht mehr. Ich habe den offziellen treiber nach der Anleitung von Sebastian Siebert installiert, dass war es dann aber. Kein Hochfahren mit Grafikkarte ist mit diesem Treiber dann mehr möglich. Es ist nur über den Textmodus mit dem offiziellen AMD Treiber möglich. Der freie Treiber macht aber keine Probleme, so das ich zur Zeit keine Veranlassung sehe den Treiber zu wechseln.
Das Profil ist durch immer neue Updates auf jede Version seit 9.1 aktuell gehalten worden. Bis 11.1 lief bei mir eine Grafikkarte von Nvidia. Danach habe ich den Prozessor und die Grafikkarte und das Motherboard gewechselt. Habe aber das Profil behalten.

Woran ich es gemerkt habe ist einfach. Ich habe ein Desktop Widget welches die aktuelle CPU Last mir grafisch mitteilt. Anhand von dem habe ich gesehen das die CPU Last von Anfang 10 - 15 % nach mehreren Stunden auf 100 % steigt. Das macht sich auch durch eine langsamer Startdauer von Programmen bemerkbar.
Anhand von der "Systhemüberwachung" konnte ich aber verfolgen wie Plasma die CPU Leistung abgibt, wenn Programme gestartet werden und sich dann wieder die CPU Leistung nimmt, so das zuletzt selbst im Leerlauf die CPU last bei 100% liegt Plasma läuft dann mit 85 - 95 % CPU Leistung. Allgemein habe ich 6 Widgets am Laufen.
Den Papierkorb, eine Analoge Uhr, CPU Tray, Netzwerktray und Memorytray, sowie seit kurzen den aktuellen Wetterbericht.
Was auch noch auffällig ist, das Plasma beim herunterfahren sich dadurch bemerkbar macht, dass es in unrgelmäßigen Abständen sich nicht abmelden lässt und sich mit einer Fehlermeldung bemerkbar macht das es unerwartet abgestürzt ist. Dann muss ich Plasma beenden damit dann der Rechner Ordnungsgemäß herunter fährt. Dies passiert bei den anderen Profilen auf dem Rechner nicht.
Da ich gerade mehrere Sachen verfolge, wollte ich mich jetzt nicht auch noch für die offizielle Bug suche für KDE anmelden. Das werde ich aber irgendwann in der Zukunft noch angehen.

So jetzt wünsche ich einen gesegneten Sonntag,

Opensource Anhänger.

Plasma-Desktop nimmt über Stunden immer mehr CPU in Anspruch

Opensource Anhänger

Anonymous

Gast

Opensource Anhänger

Opensource Anhänger

tomm.fa

.Linux Club Aushilfsadministrator

Opensource Anhänger

Anonymous

Gast

Opensource Anhänger