Hallo,
ich habe probleme mit sane (sane-backends-1.0.17) und dem scanner ScanJet3200C. Der Scanner wird erkannt und mit ./umax_pp -s kann ich sogar scannen. Wenn ich scanimage -L ausführe funktioniert die Erkennung auch, jedoch nach dem Befehl scanimage -T oder scanimage hängt die Sache nach folgender Ausgabe:
# SANE_DEBUG_UMAX_PP=255 scanimage -L
[sanei_debug] Setting debug level of umax_pp to 255.
[umax_pp] init: SANE_Auth_Callback not supported (yet) ...
[umax_pp] init: SANE v1.0.15, backend v1.0.603-dev
[umax_pp] init: evaluating option <option buffer 2097152>
[umax_pp] init: option buffer 2097152
[umax_pp] init: option buffer 2097152
[umax_pp] init: setting global option buffer to 2097152
[umax_pp] init: trying port `/dev/parport0'
[umax_pp] attach(/dev/parport0)
[umax_pp_low] PS2registerRead: found 0x20 expected 0x0 (umax_pp_low.c:7417)
[umax_pp] attach: device /dev/parport0 attached
[umax_pp] get_devices
[umax_pp] unused arg: local_only = 0
device `umax_pp:/dev/parport0' is a UMAX Astra 1220P flatbed scanner
[umax_pp] sane_exit: (...)
funktioniert
# SANE_DEBUG_UMAX_PP=255 scanimage -T
[sanei_debug] Setting debug level of umax_pp to 255.
[umax_pp] init: SANE_Auth_Callback not supported (yet) ...
[umax_pp] init: SANE v1.0.15, backend v1.0.603-dev
[umax_pp] init: evaluating option <option buffer 2097152>
[umax_pp] init: option buffer 2097152
[umax_pp] init: option buffer 2097152
[umax_pp] init: setting global option buffer to 2097152
[umax_pp] init: trying port `/dev/parport0'
[umax_pp] attach(/dev/parport0)
[umax_pp_low] PS2registerRead: found 0x20 expected 0x0 (umax_pp_low.c:7417)
[umax_pp] attach: device /dev/parport0 attached
[umax_pp] get_devices
[umax_pp] unused arg: local_only = 0
[umax_pp] open: device `/dev/parport0'
[umax_pp] open: success
[umax_pp] control_option: option 0, action 0
[umax_pp] control_option: option <>, action ... 0
[umax_pp] get value
[umax_pp] control_option: option 0, action 0
[umax_pp] control_option: option <>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 0 ()
[umax_pp] get_option_descriptor: requested option 1 ()
[umax_pp] get_option_descriptor: requested option 2 (mode)
[umax_pp] get_option_descriptor: requested option 3 (resolution)
[umax_pp] get_option_descriptor: requested option 4 (preview)
[umax_pp] get_option_descriptor: requested option 5 (preview-in-gray)
[umax_pp] get_option_descriptor: requested option 6 ()
[umax_pp] get_option_descriptor: requested option 7 (tl-x)
[umax_pp] get_option_descriptor: requested option 8 (tl-y)
[umax_pp] get_option_descriptor: requested option 9 (br-x)
[umax_pp] control_option: option 9, action 0
[umax_pp] control_option: option <br-x>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 10 (br-y)
[umax_pp] control_option: option 10, action 0
[umax_pp] control_option: option <br-y>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 11 ()
[umax_pp] get_option_descriptor: requested option 12 (lamp-control)
[umax_pp] get_option_descriptor: requested option 13 (UTA-control)
[umax_pp] get_option_descriptor: requested option 14 (custom-gamma)
[umax_pp] get_option_descriptor: requested option 15 (gamma-table)
[umax_pp] get_option_descriptor: requested option 16 (red-gamma-table)
[umax_pp] get_option_descriptor: requested option 17 (green-gamma-table)
[umax_pp] get_option_descriptor: requested option 18 (blue-gamma-table)
[umax_pp] get_option_descriptor: requested option 19 (manual-channel-gain)
[umax_pp] get_option_descriptor: requested option 20 (gray-gain)
[umax_pp] get_option_descriptor: requested option 21 (red-gain)
[umax_pp] get_option_descriptor: requested option 22 (green-gain)
[umax_pp] get_option_descriptor: requested option 23 (blue-gain)
[umax_pp] get_option_descriptor: requested option 24 (manual-offset)
[umax_pp] get_option_descriptor: requested option 25 (gray-offset)
[umax_pp] get_option_descriptor: requested option 26 (red-offset)
[umax_pp] get_option_descriptor: requested option 27 (green-offset)
[umax_pp] get_option_descriptor: requested option 28 (blue-offset)
[umax_pp] control_option: option 7, action 0
[umax_pp] control_option: option <tl-x>, action ... 0
[umax_pp] get value
[umax_pp] control_option: option 8, action 0
[umax_pp] control_option: option <tl-y>, action ... 0
[umax_pp] get value
[umax_pp] control_option: option 7, action 0
[umax_pp] control_option: option <tl-x>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 9 (br-x)
[umax_pp] control_option: option 9, action 1
[umax_pp] control_option: option <br-x>, action ... 1
[umax_pp] set value
[umax_pp] control_option: option 8, action 0
[umax_pp] control_option: option <tl-y>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 10 (br-y)
[umax_pp] control_option: option 10, action 1
[umax_pp] control_option: option <br-y>, action ... 1
[umax_pp] set value
[umax_pp] sane_get_parameters
[umax_pp] sane_get_parameters: dpi set to 75
[umax_pp] sane_start:umax_pp_start(0,0,5100,6992,75,0,0,0)
hängt für immer
# SANE_DEBUG_UMAX_PP=255 scanimage
[sanei_debug] Setting debug level of umax_pp to 255.
[umax_pp] init: SANE_Auth_Callback not supported (yet) ...
[umax_pp] init: SANE v1.0.15, backend v1.0.603-dev
[umax_pp] init: evaluating option <option buffer 2097152>
[umax_pp] init: option buffer 2097152
[umax_pp] init: option buffer 2097152
[umax_pp] init: setting global option buffer to 2097152
[umax_pp] init: trying port `/dev/parport0'
[umax_pp] attach(/dev/parport0)
[umax_pp_low] PS2registerRead: found 0x20 expected 0x0 (umax_pp_low.c:7417)
[umax_pp_low] sendData failed: sent only 33 bytes out of 34 (umax_pp_low.c:5408)
[umax_pp_low] sendData failed got 0xE8 instead of 0xC0 or 0xD0 (umax_pp_low.c:5400)
[umax_pp_low] Blindly going on .....
[umax_pp_low] sendWord failed got 0xE8 instead of 0xC0 or 0xD0 (umax_pp_low.c:4550)
[umax_pp_low] Blindly going on .....
[umax_pp_low] Unexpected reg19: 0xE8 instead of 0xC0 or 0xD0 (umax_pp_low.c:5447)
[umax_pp_low] cmdSetDataBuffer(initbuf) failed ! (umax_pp_low.c:7675)
[umax_pp] attach: failed to probe scanner on /dev/parport0
[umax_pp] attach: couldn't attach to `/dev/parport0' (Error during device I/O)
[umax_pp] umax_pp(v1.0.603-dev): line 253: debug exception
[umax_pp] init: couldn't attach to port `/dev/parport0'
[umax_pp] get_devices
[umax_pp] unused arg: local_only = 0
scanimage: no SANE devices found
[umax_pp] sane_exit: (...)
MFL-PC1:/usr/src/sane/sane-backends-1.0.17/sane-backends-1.0.17/tools # SANE_DEBUG_UMAX_PP=255 scanimage
[sanei_debug] Setting debug level of umax_pp to 255.
[umax_pp] init: SANE_Auth_Callback not supported (yet) ...
[umax_pp] init: SANE v1.0.15, backend v1.0.603-dev
[umax_pp] init: evaluating option <option buffer 2097152>
[umax_pp] init: option buffer 2097152
[umax_pp] init: option buffer 2097152
[umax_pp] init: setting global option buffer to 2097152
[umax_pp] init: trying port `/dev/parport0'
[umax_pp] attach(/dev/parport0)
[umax_pp_low] PS2registerRead: found 0x20 expected 0x0 (umax_pp_low.c:7417)
[umax_pp] attach: device /dev/parport0 attached
[umax_pp] get_devices
[umax_pp] unused arg: local_only = 0
[umax_pp] open: device `/dev/parport0'
[umax_pp] open: success
[umax_pp] control_option: option 0, action 0
[umax_pp] control_option: option <>, action ... 0
[umax_pp] get value
[umax_pp] control_option: option 0, action 0
[umax_pp] control_option: option <>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 0 ()
[umax_pp] get_option_descriptor: requested option 1 ()
[umax_pp] get_option_descriptor: requested option 2 (mode)
[umax_pp] get_option_descriptor: requested option 3 (resolution)
[umax_pp] get_option_descriptor: requested option 4 (preview)
[umax_pp] get_option_descriptor: requested option 5 (preview-in-gray)
[umax_pp] get_option_descriptor: requested option 6 ()
[umax_pp] get_option_descriptor: requested option 7 (tl-x)
[umax_pp] get_option_descriptor: requested option 8 (tl-y)
[umax_pp] get_option_descriptor: requested option 9 (br-x)
[umax_pp] control_option: option 9, action 0
[umax_pp] control_option: option <br-x>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 10 (br-y)
[umax_pp] control_option: option 10, action 0
[umax_pp] control_option: option <br-y>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 11 ()
[umax_pp] get_option_descriptor: requested option 12 (lamp-control)
[umax_pp] get_option_descriptor: requested option 13 (UTA-control)
[umax_pp] get_option_descriptor: requested option 14 (custom-gamma)
[umax_pp] get_option_descriptor: requested option 15 (gamma-table)
[umax_pp] get_option_descriptor: requested option 16 (red-gamma-table)
[umax_pp] get_option_descriptor: requested option 17 (green-gamma-table)
[umax_pp] get_option_descriptor: requested option 18 (blue-gamma-table)
[umax_pp] get_option_descriptor: requested option 19 (manual-channel-gain)
[umax_pp] get_option_descriptor: requested option 20 (gray-gain)
[umax_pp] get_option_descriptor: requested option 21 (red-gain)
[umax_pp] get_option_descriptor: requested option 22 (green-gain)
[umax_pp] get_option_descriptor: requested option 23 (blue-gain)
[umax_pp] get_option_descriptor: requested option 24 (manual-offset)
[umax_pp] get_option_descriptor: requested option 25 (gray-offset)
[umax_pp] get_option_descriptor: requested option 26 (red-offset)
[umax_pp] get_option_descriptor: requested option 27 (green-offset)
[umax_pp] get_option_descriptor: requested option 28 (blue-offset)
[umax_pp] control_option: option 7, action 0
[umax_pp] control_option: option <tl-x>, action ... 0
[umax_pp] get value
[umax_pp] control_option: option 8, action 0
[umax_pp] control_option: option <tl-y>, action ... 0
[umax_pp] get value
[umax_pp] control_option: option 7, action 0
[umax_pp] control_option: option <tl-x>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 9 (br-x)
[umax_pp] control_option: option 9, action 1
[umax_pp] control_option: option <br-x>, action ... 1
[umax_pp] set value
[umax_pp] control_option: option 8, action 0
[umax_pp] control_option: option <tl-y>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 10 (br-y)
[umax_pp] control_option: option 10, action 1
[umax_pp] control_option: option <br-y>, action ... 1
[umax_pp] set value
[umax_pp] sane_get_parameters
[umax_pp] sane_get_parameters: dpi set to 75
[umax_pp] sane_start:umax_pp_start(0,0,5100,6992,75,0,0,0)
hängt auch für immer
LPT ist im EPP Mode, für mich ist verwirrend, dass es mit dem Tool umax_pp funktioniert und mit scanimage nicht, da kann es ja nur eine Kleinigkeit sein oder?
Hat jemand eine Idee?
Danke für die Rückmeldungen
ich habe probleme mit sane (sane-backends-1.0.17) und dem scanner ScanJet3200C. Der Scanner wird erkannt und mit ./umax_pp -s kann ich sogar scannen. Wenn ich scanimage -L ausführe funktioniert die Erkennung auch, jedoch nach dem Befehl scanimage -T oder scanimage hängt die Sache nach folgender Ausgabe:
# SANE_DEBUG_UMAX_PP=255 scanimage -L
[sanei_debug] Setting debug level of umax_pp to 255.
[umax_pp] init: SANE_Auth_Callback not supported (yet) ...
[umax_pp] init: SANE v1.0.15, backend v1.0.603-dev
[umax_pp] init: evaluating option <option buffer 2097152>
[umax_pp] init: option buffer 2097152
[umax_pp] init: option buffer 2097152
[umax_pp] init: setting global option buffer to 2097152
[umax_pp] init: trying port `/dev/parport0'
[umax_pp] attach(/dev/parport0)
[umax_pp_low] PS2registerRead: found 0x20 expected 0x0 (umax_pp_low.c:7417)
[umax_pp] attach: device /dev/parport0 attached
[umax_pp] get_devices
[umax_pp] unused arg: local_only = 0
device `umax_pp:/dev/parport0' is a UMAX Astra 1220P flatbed scanner
[umax_pp] sane_exit: (...)
funktioniert
# SANE_DEBUG_UMAX_PP=255 scanimage -T
[sanei_debug] Setting debug level of umax_pp to 255.
[umax_pp] init: SANE_Auth_Callback not supported (yet) ...
[umax_pp] init: SANE v1.0.15, backend v1.0.603-dev
[umax_pp] init: evaluating option <option buffer 2097152>
[umax_pp] init: option buffer 2097152
[umax_pp] init: option buffer 2097152
[umax_pp] init: setting global option buffer to 2097152
[umax_pp] init: trying port `/dev/parport0'
[umax_pp] attach(/dev/parport0)
[umax_pp_low] PS2registerRead: found 0x20 expected 0x0 (umax_pp_low.c:7417)
[umax_pp] attach: device /dev/parport0 attached
[umax_pp] get_devices
[umax_pp] unused arg: local_only = 0
[umax_pp] open: device `/dev/parport0'
[umax_pp] open: success
[umax_pp] control_option: option 0, action 0
[umax_pp] control_option: option <>, action ... 0
[umax_pp] get value
[umax_pp] control_option: option 0, action 0
[umax_pp] control_option: option <>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 0 ()
[umax_pp] get_option_descriptor: requested option 1 ()
[umax_pp] get_option_descriptor: requested option 2 (mode)
[umax_pp] get_option_descriptor: requested option 3 (resolution)
[umax_pp] get_option_descriptor: requested option 4 (preview)
[umax_pp] get_option_descriptor: requested option 5 (preview-in-gray)
[umax_pp] get_option_descriptor: requested option 6 ()
[umax_pp] get_option_descriptor: requested option 7 (tl-x)
[umax_pp] get_option_descriptor: requested option 8 (tl-y)
[umax_pp] get_option_descriptor: requested option 9 (br-x)
[umax_pp] control_option: option 9, action 0
[umax_pp] control_option: option <br-x>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 10 (br-y)
[umax_pp] control_option: option 10, action 0
[umax_pp] control_option: option <br-y>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 11 ()
[umax_pp] get_option_descriptor: requested option 12 (lamp-control)
[umax_pp] get_option_descriptor: requested option 13 (UTA-control)
[umax_pp] get_option_descriptor: requested option 14 (custom-gamma)
[umax_pp] get_option_descriptor: requested option 15 (gamma-table)
[umax_pp] get_option_descriptor: requested option 16 (red-gamma-table)
[umax_pp] get_option_descriptor: requested option 17 (green-gamma-table)
[umax_pp] get_option_descriptor: requested option 18 (blue-gamma-table)
[umax_pp] get_option_descriptor: requested option 19 (manual-channel-gain)
[umax_pp] get_option_descriptor: requested option 20 (gray-gain)
[umax_pp] get_option_descriptor: requested option 21 (red-gain)
[umax_pp] get_option_descriptor: requested option 22 (green-gain)
[umax_pp] get_option_descriptor: requested option 23 (blue-gain)
[umax_pp] get_option_descriptor: requested option 24 (manual-offset)
[umax_pp] get_option_descriptor: requested option 25 (gray-offset)
[umax_pp] get_option_descriptor: requested option 26 (red-offset)
[umax_pp] get_option_descriptor: requested option 27 (green-offset)
[umax_pp] get_option_descriptor: requested option 28 (blue-offset)
[umax_pp] control_option: option 7, action 0
[umax_pp] control_option: option <tl-x>, action ... 0
[umax_pp] get value
[umax_pp] control_option: option 8, action 0
[umax_pp] control_option: option <tl-y>, action ... 0
[umax_pp] get value
[umax_pp] control_option: option 7, action 0
[umax_pp] control_option: option <tl-x>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 9 (br-x)
[umax_pp] control_option: option 9, action 1
[umax_pp] control_option: option <br-x>, action ... 1
[umax_pp] set value
[umax_pp] control_option: option 8, action 0
[umax_pp] control_option: option <tl-y>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 10 (br-y)
[umax_pp] control_option: option 10, action 1
[umax_pp] control_option: option <br-y>, action ... 1
[umax_pp] set value
[umax_pp] sane_get_parameters
[umax_pp] sane_get_parameters: dpi set to 75
[umax_pp] sane_start:umax_pp_start(0,0,5100,6992,75,0,0,0)
hängt für immer
# SANE_DEBUG_UMAX_PP=255 scanimage
[sanei_debug] Setting debug level of umax_pp to 255.
[umax_pp] init: SANE_Auth_Callback not supported (yet) ...
[umax_pp] init: SANE v1.0.15, backend v1.0.603-dev
[umax_pp] init: evaluating option <option buffer 2097152>
[umax_pp] init: option buffer 2097152
[umax_pp] init: option buffer 2097152
[umax_pp] init: setting global option buffer to 2097152
[umax_pp] init: trying port `/dev/parport0'
[umax_pp] attach(/dev/parport0)
[umax_pp_low] PS2registerRead: found 0x20 expected 0x0 (umax_pp_low.c:7417)
[umax_pp_low] sendData failed: sent only 33 bytes out of 34 (umax_pp_low.c:5408)
[umax_pp_low] sendData failed got 0xE8 instead of 0xC0 or 0xD0 (umax_pp_low.c:5400)
[umax_pp_low] Blindly going on .....
[umax_pp_low] sendWord failed got 0xE8 instead of 0xC0 or 0xD0 (umax_pp_low.c:4550)
[umax_pp_low] Blindly going on .....
[umax_pp_low] Unexpected reg19: 0xE8 instead of 0xC0 or 0xD0 (umax_pp_low.c:5447)
[umax_pp_low] cmdSetDataBuffer(initbuf) failed ! (umax_pp_low.c:7675)
[umax_pp] attach: failed to probe scanner on /dev/parport0
[umax_pp] attach: couldn't attach to `/dev/parport0' (Error during device I/O)
[umax_pp] umax_pp(v1.0.603-dev): line 253: debug exception
[umax_pp] init: couldn't attach to port `/dev/parport0'
[umax_pp] get_devices
[umax_pp] unused arg: local_only = 0
scanimage: no SANE devices found
[umax_pp] sane_exit: (...)
MFL-PC1:/usr/src/sane/sane-backends-1.0.17/sane-backends-1.0.17/tools # SANE_DEBUG_UMAX_PP=255 scanimage
[sanei_debug] Setting debug level of umax_pp to 255.
[umax_pp] init: SANE_Auth_Callback not supported (yet) ...
[umax_pp] init: SANE v1.0.15, backend v1.0.603-dev
[umax_pp] init: evaluating option <option buffer 2097152>
[umax_pp] init: option buffer 2097152
[umax_pp] init: option buffer 2097152
[umax_pp] init: setting global option buffer to 2097152
[umax_pp] init: trying port `/dev/parport0'
[umax_pp] attach(/dev/parport0)
[umax_pp_low] PS2registerRead: found 0x20 expected 0x0 (umax_pp_low.c:7417)
[umax_pp] attach: device /dev/parport0 attached
[umax_pp] get_devices
[umax_pp] unused arg: local_only = 0
[umax_pp] open: device `/dev/parport0'
[umax_pp] open: success
[umax_pp] control_option: option 0, action 0
[umax_pp] control_option: option <>, action ... 0
[umax_pp] get value
[umax_pp] control_option: option 0, action 0
[umax_pp] control_option: option <>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 0 ()
[umax_pp] get_option_descriptor: requested option 1 ()
[umax_pp] get_option_descriptor: requested option 2 (mode)
[umax_pp] get_option_descriptor: requested option 3 (resolution)
[umax_pp] get_option_descriptor: requested option 4 (preview)
[umax_pp] get_option_descriptor: requested option 5 (preview-in-gray)
[umax_pp] get_option_descriptor: requested option 6 ()
[umax_pp] get_option_descriptor: requested option 7 (tl-x)
[umax_pp] get_option_descriptor: requested option 8 (tl-y)
[umax_pp] get_option_descriptor: requested option 9 (br-x)
[umax_pp] control_option: option 9, action 0
[umax_pp] control_option: option <br-x>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 10 (br-y)
[umax_pp] control_option: option 10, action 0
[umax_pp] control_option: option <br-y>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 11 ()
[umax_pp] get_option_descriptor: requested option 12 (lamp-control)
[umax_pp] get_option_descriptor: requested option 13 (UTA-control)
[umax_pp] get_option_descriptor: requested option 14 (custom-gamma)
[umax_pp] get_option_descriptor: requested option 15 (gamma-table)
[umax_pp] get_option_descriptor: requested option 16 (red-gamma-table)
[umax_pp] get_option_descriptor: requested option 17 (green-gamma-table)
[umax_pp] get_option_descriptor: requested option 18 (blue-gamma-table)
[umax_pp] get_option_descriptor: requested option 19 (manual-channel-gain)
[umax_pp] get_option_descriptor: requested option 20 (gray-gain)
[umax_pp] get_option_descriptor: requested option 21 (red-gain)
[umax_pp] get_option_descriptor: requested option 22 (green-gain)
[umax_pp] get_option_descriptor: requested option 23 (blue-gain)
[umax_pp] get_option_descriptor: requested option 24 (manual-offset)
[umax_pp] get_option_descriptor: requested option 25 (gray-offset)
[umax_pp] get_option_descriptor: requested option 26 (red-offset)
[umax_pp] get_option_descriptor: requested option 27 (green-offset)
[umax_pp] get_option_descriptor: requested option 28 (blue-offset)
[umax_pp] control_option: option 7, action 0
[umax_pp] control_option: option <tl-x>, action ... 0
[umax_pp] get value
[umax_pp] control_option: option 8, action 0
[umax_pp] control_option: option <tl-y>, action ... 0
[umax_pp] get value
[umax_pp] control_option: option 7, action 0
[umax_pp] control_option: option <tl-x>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 9 (br-x)
[umax_pp] control_option: option 9, action 1
[umax_pp] control_option: option <br-x>, action ... 1
[umax_pp] set value
[umax_pp] control_option: option 8, action 0
[umax_pp] control_option: option <tl-y>, action ... 0
[umax_pp] get value
[umax_pp] get_option_descriptor: requested option 10 (br-y)
[umax_pp] control_option: option 10, action 1
[umax_pp] control_option: option <br-y>, action ... 1
[umax_pp] set value
[umax_pp] sane_get_parameters
[umax_pp] sane_get_parameters: dpi set to 75
[umax_pp] sane_start:umax_pp_start(0,0,5100,6992,75,0,0,0)
hängt auch für immer
LPT ist im EPP Mode, für mich ist verwirrend, dass es mit dem Tool umax_pp funktioniert und mit scanimage nicht, da kann es ja nur eine Kleinigkeit sein oder?
Hat jemand eine Idee?
Danke für die Rückmeldungen