:roll: Bin an verzweifeln, habe mir den 2480 gekauft und bekomme ihn nicht in Suse 9.3 zum laufen.Habe bereits Sane 1.17.0 installiert.
Xscane kann ihn nicht erreichen. Yast Test: sagt er ist nicht zu finden,aber er wird als Epson mit epokowa treiber angezeigt. lsusb
hat ihn aber gefunden.
Habe folgende Eingaben in der Konsole gemacht.
linux:/home/hg # lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 04b8:0121 Seiko Epson Corp.
Bus 001 Device 003: ID 03f0:1604 Hewlett-Packard DeskJet 940c
Bus 001 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Bus 001 Device 001: ID 0000:0000
linux:/home/hg # sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04b8 [EPSON], product=0x0121 [EPSON Scanner]) at libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
linux:/home/hg # scanimage -L
[umax_pp_low] sync610p failed (got 0x78 expected 0x38)! (umax_pp_low.c:3733)
[umax_pp_low] sync610p failed! Scanner not present or powered off ... (umax_pp_low.c:6369)
[umax_pp_low] initTransport610p() failed (umax_pp_low.c:6679)
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
was kann ich da machen?
:twisted:
Xscane kann ihn nicht erreichen. Yast Test: sagt er ist nicht zu finden,aber er wird als Epson mit epokowa treiber angezeigt. lsusb
hat ihn aber gefunden.
Habe folgende Eingaben in der Konsole gemacht.
linux:/home/hg # lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 04b8:0121 Seiko Epson Corp.
Bus 001 Device 003: ID 03f0:1604 Hewlett-Packard DeskJet 940c
Bus 001 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Bus 001 Device 001: ID 0000:0000
linux:/home/hg # sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04b8 [EPSON], product=0x0121 [EPSON Scanner]) at libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
linux:/home/hg # scanimage -L
[umax_pp_low] sync610p failed (got 0x78 expected 0x38)! (umax_pp_low.c:3733)
[umax_pp_low] sync610p failed! Scanner not present or powered off ... (umax_pp_low.c:6369)
[umax_pp_low] initTransport610p() failed (umax_pp_low.c:6679)
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
was kann ich da machen?
:twisted: