• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

USB-Stick WN111 von Netgear funktioniert nicht

Guten Abend,

habe den Router WRN2000 und o. g, Stick von Netgear. Unter Ubuntu 8.10 funktioniert er mit Ndiswrapper und dem Treiber netmw245.tar.gz (siehe Dateianhang) problemlos.
Unter OpenSuse 11.1 bekomme ich ihn mit der gleichen Anleitung leider nicht zum laufen, es blinkt noch nicht mal die blaue Lampe am Stick. Modprobe ndiswrapper läuft durch ohne Fehler, Ndiswapper -l zeigt an, dass der Treiber geladen ist .

Code:
linux-0wje:/home/hans # ndiswrapper -l
netmw245 : driver installed
        device (0846:9000) present
linux-0wje:/home/hans #

Code:
- [code]
- collectNWData.sh V0.6.1.8-1 (Rev: 1.140 Build: 2009/01/17 19:41:48)
- --- Welcher Netzwerkverbindungtyp soll getestet werden?
- --- (2) Kabellose Verbindung (WLAN)
- --- Welche Netzwerktopologie liegt vor?
- --- (1) WLAN access point <---> LinuxClient
- --- Auf welchem Rechner wird das Script ausgeführt?
- --- (1) LinuxClient
- 
- !!! CND0310W: Klassische Netzwerkkonfiguration mit ifup wurde entdeckt. Die Konfiguration mit knetworkmanager ist wesentlich einfacher
- !!! CND0360E: Eine drahtlose Verbindung wurde getestet obwohl eine kabelgebundene Verbindung am Interface eth0 existiert . Das Netzwerkkabel ausstecken und das Script noch einmal starten
- --- Netzwerkkonfigurationsinformationen werden in Datei collectNWData.txt geschrieben ...
- --- 1 Fehler gefunden
- --- 1 Warnungen gefunden
- --- Gehe zu http://www.linux-tips-and-tricks.de/CND um detailiertere Hinweise zu den Fehlermeldungen/Warnungen zu bekommen und wie die Fehler beseitigt werden könnenF
- 
- ==================================================================================================================
- ==================================================================================================================
- *** uname -a
- Linux linux-0wje 2.6.27.7-9-pae #1 SMP 2008-12-04 18:10:04 +0100 i686 i686 i386 GNU/Linux
- ==================================================================================================================
- *** cat /etc/*-release
- LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-2.0-ia32:core-3.2-ia32"
- openSUSE 11.1 (i586)
- VERSION = 11.1
- ==================================================================================================================
- *** cat /etc/resolv | grep -vi "search"
- nameserver 192.168.1.1
- ==================================================================================================================
- *** cat /etc/hosts
- 127.0.0.1       localhost
- 127.0.0.2       linux-0wje.site linux-0wje
- ==================================================================================================================
- *** cat /etc/HOSTNAME
- linux-0wje.site
- ==================================================================================================================
- *** route
- Kernel IP Routentabelle
- Ziel            Router          Genmask         Flags Metric Ref    Use Iface
- 192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
- 169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 eth0
- 127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
- 0.0.0.0         192.168.1.1     0.0.0.0         UG    0      0        0 eth0
- ==================================================================================================================
- *** ifconfig
- eth0      Link encap:Ethernet  Hardware Adresse ##:##:##:##:##:#1  
-           inet Adresse:192.168.1.4  Bcast:192.168.1.255  Maske:255.255.255.0
-           UP BROADCAST MULTICAST  MTU:1500  Metric:1
-           RX packets:6407 errors:0 dropped:0 overruns:0 frame:0
-           TX packets:5304 errors:0 dropped:0 overruns:0 carrier:0
-           collisions:0 Sendewarteschlangenlänge:1000 
-           RX bytes:7037097 (6.7 Mb)  TX bytes:638225 (623.2 Kb)
-           Interrupt:23 Basisadresse:0xc000 
- lo        Link encap:Lokale Schleife  
-           inet Adresse:127.0.0.1  Maske:255.0.0.0
-           UP LOOPBACK RUNNING  MTU:16436  Metric:1
-           RX packets:185 errors:0 dropped:0 overruns:0 frame:0
-           TX packets:185 errors:0 dropped:0 overruns:0 carrier:0
-           collisions:0 Sendewarteschlangenlänge:0 
-           RX bytes:14124 (13.7 Kb)  TX bytes:14124 (13.7 Kb)
- pan0      Link encap:Ethernet  Hardware Adresse ##:##:##:##:##:#2  
-           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
-           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
-           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
-           collisions:0 Sendewarteschlangenlänge:0 
-           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
- ==================================================================================================================
- *** ping tests
- Ping of 195.135.220.3 failed
- ping: unknown host www.suse.de
- Ping of www.suse.de failed
- ==================================================================================================================
- *** dhcpcd-test
- ==================================================================================================================
- *** lspci
- 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 7c)
- ==================================================================================================================
- *** lsusb
- Bus 005 Device 010: ID 0846:9000 NetGear, Inc. WN111(v1) RangeMax Next Wireless [Marvell TopDog]
- Bus 005 Device 009: ID 1267:0103 Logic3 / SpectraVideo plc G-720 Keyboard
- Bus 005 Device 006: ID 04da:0180 Panasonic (Matsushita) 
- Bus 005 Device 007: ID 0ccd:0072 TerraTec Electronic GmbH 
- Bus 005 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
- Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Bus 002 Device 003: ID 0d46:2011 Kobil Systems GmbH 
- Bus 002 Device 002: ID 05fe:0011 Chic Technology Corp. Browser Mouse
- Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Bus 001 Device 007: ID 050d:016a Belkin Components 
- Bus 001 Device 006: ID 0a5c:4503 Broadcom Corp. 
- Bus 001 Device 005: ID 0a5c:4502 Broadcom Corp. 
- Bus 001 Device 004: ID 0a5c:4500 Broadcom Corp. 
- Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- ==================================================================================================================
- *** hwinfo --netcard; # (filtered)
- 28: PCI 12.0: 0200 Ethernet controller
-   Model: "VIA VT6102 [Rhine-II]"
-   Vendor: pci 0x1106 "VIA Technologies, Inc."
-   Device: pci 0x3065 "VT6102 [Rhine-II]"
-   SubVendor: pci 0x1849 "ASRock Incorporation"
-   SubDevice: pci 0x3065 "K7VT6 motherboard"
-   Driver: "via-rhine"
-   Driver Modules: "via_rhine"
-   Device File: eth0
-   Link detected: no
-     Driver Status: via-rhine is active
-     Driver Activation Cmd: "modprobe via-rhine"
- ==================================================================================================================
- *** List of loaded modules
- | af_packet               | agpgart                 | ata_generic             | binfmt_misc              |
- | bluetooth               | bnep                    | bridge                  | btusb                    |
- | button                  | cdrom                   | crc_t10dif              | dm_mod                   |
- | dock                    | dvb_core                | edd                     | ehci_hcd                 |
- | em28xx                  | em28xx_audio            | em28xx_cx25843          | em28xx_dvb               |
- | ext3                    | fan                     | ff_memless              | floppy                   |
- | fuse                    | hci_usb                 | hid                     | hwmon                    |
- | i2c_core                | i2c_viapro              | ide_core                | ide_pci_generic          |
- | ip6_tables              | iptable_filter          | iptable_raw             | ip_tables                |
- | ipt_LOG                 | ipt_REJECT              | jbd                     | joydev                   |
- | kobil_sct               | l2cap                   | libata                  | loop                     |
- | mbcache                 | mii                     | ndiswrapper             | nf_conntrack             |
- | nf_conntrack_ipv4       | nf_conntrack_netbios_ns | nvidia                  | parport                  |
- | parport_pc              | pata_via                | pci_hotplug             | pcspkr                   |
- | ppdev                   | processor               | rfcomm                  | rtc_cmos                 |
- | rtc_core                | rtc_lib                 | sata_sil                | sata_via                 |
- | sco                     | scsi_mod                | sd_mod                  | serio_raw                |
- | sg                      | shpchp                  | snd                     | snd_hda_intel            |
- | snd_hwdep               | snd_mixer_oss           | snd_page_alloc          | snd_pcm                  |
- | snd_pcm_oss             | snd_seq                 | snd_seq_device          | snd_timer                |
- | soundcore               | sr_mod                  | stp                     | thermal                  |
- | thermal_sys             | tuner_xc5000            | uhci_hcd                | usbcore                  |
- | usbhid                  | usbserial               | v4l1_compat             | via82cxxx                |
- | via_agp                 | via_rhine               | videodev                | x_tables                 |
- | xt_limit                | xt_NOTRACK              | xt_physdev              | xt_pkttype               |
- | xt_state                | xt_tcpudp               | zl10353                 |
- ==================================================================================================================
- *** cat /etc/sysconfig/network/ifcfg-[earwd]* | egrep -v ".*=''"
- ==================================================================================================================
- *** cat /etc/sysconfig/network/ifcfg-eth0
- BOOTPROTO='dhcp'
- NAME='VT6102 [Rhine-II]'
- STARTMODE='manual'
- USERCONTROL='yes'
- ==================================================================================================================
- *** cat /etc/sysconfig/network/ifcfg-wlan0
- BOOTPROTO='dhcp'
- STARTMODE='auto'
- USERCONTROL='no'
- WIRELESS_AUTH_MODE='open'
- WIRELESS_BITRATE='auto'
- WIRELESS_DEFAULT_KEY='@@@@@@'
- WIRELESS_ESSID='§§§§§§§§1'
- WIRELESS_KEY_0='@@@@@@'
- WIRELESS_KEY_LENGTH='@@@@@@'
- WIRELESS_MODE='Managed'
- WIRELESS_POWER='yes'
- ==================================================================================================================
- *** iwconfig
- lo        no wireless extensions.
- eth0      no wireless extensions.
- pan0      no wireless extensions.
- ==================================================================================================================
- *** Actual date for bias of following greps
- 21:06:59 2009-01-18
- ==================================================================================================================
- *** tail -n 300 /var/log/messages* | grep -i -A 5 'firmware'
- ==================================================================================================================
- *** grep -i radio /var/log/boot.msg | tail -n 5
- <6>radio device registered as /dev/radio0
- ==================================================================================================================
- *** dmesg | grep -i radio | tail -n 5
- radio device registered as /dev/radio0
- opening radio device and trying to acquire exclusive lock
- device is locked in fmradio mode now
- ==================================================================================================================
- *** tail -n 300 /var/log/messages* | /usr/bin/grep -i firmware | tail -n 5
- ==================================================================================================================
- *** ls -ls /lib/firmware
- insgesamt 4
- 4 drwxr-xr-x 14 root root 4096 17. Jan 23:56 2.6.27.7-9-pae
- ==================================================================================================================
- *** ndiswrapper -l
- netmw245 : driver installed
- 	device (0846:9000) present
- ==================================================================================================================
- *** Active processes
- wpa_supplicant:YES knetworkmanager:NO nm-applet:NO
- ==================================================================================================================
- *** grep NETWORKMANAGER /etc/sysconfig/network/config
- NETWORKMANAGER="no"
- ==================================================================================================================
- *** grep -i persistent /etc/sysconfig/network/config
- ==================================================================================================================
- *** grep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/70-persistent-net
- /usr/bin/egrep: /etc/udev/rules.d/*net_persistent*: Datei oder Verzeichnis nicht gefunden
- /etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
- ==================================================================================================================
- *** grep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*
- /etc/modprobe.conf:install eth0             /bin/true
- /etc/modprobe.conf:install eth1             /bin/true
- /etc/modprobe.d/ndiswrapper:alias wlan0 ndiswrapper
- ==================================================================================================================
- *** iwlist scanning
- ==================================================================================================================
- *** NWEliza states
- IF:eth0  IM:1
- DI:1 dI:0 NI:1 cNI:1 NDIS:0 NIWL:0 IP6:0 KM:0 WLW:eth0 1 AP:0 
-
[/code]


lsusb zeigt folgendes an:

Code:
linux-0wje:/home/hans # lsusb
Bus 005 Device 010: ID 0846:9000 NetGear, Inc. WN111(v1) RangeMax Next Wireless [Marvell TopDog]
Bus 005 Device 009: ID 1267:0103 Logic3 / SpectraVideo plc G-720 Keyboard
Bus 005 Device 006: ID 04da:0180 Panasonic (Matsushita)
Bus 005 Device 007: ID 0ccd:0072 TerraTec Electronic GmbH
Bus 005 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 0d46:2011 Kobil Systems GmbH
Bus 002 Device 002: ID 05fe:0011 Chic Technology Corp. Browser Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 050d:016a Belkin Components
Bus 001 Device 006: ID 0a5c:4503 Broadcom Corp.
Bus 001 Device 005: ID 0a5c:4502 Broadcom Corp.
Bus 001 Device 004: ID 0a5c:4500 Broadcom Corp.
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
linux-0wje:/home/hans #

iwconfig zeigt folgendes an:

Code:
linux-0wje:/home/hans # iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

pan0      no wireless extensions.

linux-0wje:/home/hans #

ifconfig zeigt folgendes an:

Code:
linux-0wje:/home/hans # ifconfig
eth0      Link encap:Ethernet  Hardware Adresse 00:19:66:33:C7:86
          inet Adresse:192.168.1.4  Bcast:192.168.1.255  Maske:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:7600 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6616 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000
          RX bytes:7737346 (7.3 Mb)  TX bytes:1238351 (1.1 Mb)
          Interrupt:23 Basisadresse:0xc000

lo        Link encap:Lokale Schleife
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:252 errors:0 dropped:0 overruns:0 frame:0
          TX packets:252 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:0
          RX bytes:19192 (18.7 Kb)  TX bytes:19192 (18.7 Kb)

pan0      Link encap:Ethernet  Hardware Adresse 4E:23:A8:6A:29:F3
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

linux-0wje:/home/hans #

Nach einem Neustart des Rechners kann ich unter Kinternet keine drahtlose Verbindung einrichten, das Modul Ndiswrapper erscheint nicht unter Hardware bei Kinternet. Auch im Startprotokoll finde ich keinen Hinweis, das Ndiswrapper geladen wird.

Für Hilfe wäre ich dankbar.

mit freundlichen Grüßen

schmiha :/
 

Anhänge

  • netmw245.tar.gz
    212,8 KB · Aufrufe: 4
Ich würde ja zunächst mal den NetworkManager aktivieren.

Und
Code:
- !!! CND0360E: Eine drahtlose Verbindung wurde getestet obwohl eine kabelgebundene Verbindung am Interface eth0 existiert . Das Netzwerkkabel ausstecken und das Script noch einmal starten
würde ich auch mal berücksichtigen.

Und wenn du dir die Ausgabe des skriptes auch sonst mal genauer angeschaut hättest, dann hättest du das doppelte posten von lsusb und ifconfig auch nicht benötigt.
 
Hallo, Grothesk,

das Netzwerkkabel habe ich natürlich nach dieser Meldung abgezogen und das Script nochmal durchlaufen lassen, die Meldung, Kabel abziehen war wieder dabei. Ich habe Kinternet beendet und die von mir eingetragene kabellose Verbindung gelöscht und über den Netzwerkmanager die Verbindung versucht einzurichten. Bei der kabelgebundenen Verbindung hat es sofort geklappt, bei der drahtlosen Verbindung leider nicht. Konnte die SSid,die Verschlüsselung eingeben, aber die Verbindung nicht starten. Hat auch kein Netz gefunden., Dann ohne Verschlüsselung versucht, hat auch nicht geklappt.

Gruss
schmiha
 

framp

Moderator
Teammitglied
schmiha schrieb:
... das Netzwerkkabel habe ich natürlich nach dieser Meldung abgezogen und das Script nochmal durchlaufen lassen, die Meldung, Kabel abziehen war wieder dabei. ...
Das sollte nicht sein :schockiert: . Kannst Du mir bitte die Ausgabedatei collectNWData.txt mit abgezogenem Kabel per eMail zuschicken? (eMail geht an Dich per PN)
 
ich habe mir ndiswrapper gerade selbstkompiliert und hatte genausowenig erfolg.
noch eine zweite frage: hat es was zu bedoten das bei ndiswrapper -l "driver installed", statt, wie im README beschrieben, "driver present" steht?
 
hallo und guten Morgen,

ich habe es leider nicht hinbekommen. Habe jetzt einen Router von Belkin mit USB Stick und damit läuft es jetzt mit dem rt2870usb Treiber.

Gruss
schmiha
 
Oben