Windows Partition wird nicht erkannt

lewendi · 20 März 2012

Nachdem ich auf meinem NB Ubuntu zusätzlich zum bestehenden Windows7 installiert habe wird Windows nicht im Boootmanager erkannt.
Als Windows wird im Bootmanager die "HDDRECOVERY" erkannt.
Windows7 ist aber "TI30632000A"

Hier mal das Ergebnis von blkid

Code:

walter@Walter-NB:~$ sudo blkid
[sudo] password for walter: 
/dev/sda1: LABEL="System" UUID="FE6ADA4F6ADA0475" TYPE="ntfs" 
/dev/sda2: LABEL="TI30632000A" UUID="FADE08DEDE089553" TYPE="ntfs" 
/dev/sda4: LABEL="HDDRECOVERY" UUID="2A1242DB1242AC1F" TYPE="ntfs" 
/dev/sda5: UUID="b0a8c687-ee14-458b-b2b0-9562f80fb3e2" TYPE="ext4" 
/dev/sda6: UUID="da5b2f0f-3b2d-4c41-ad7b-0ef69f758c2e" TYPE="ext4" 
/dev/sda7: TYPE="swap" 
/dev/sda8: LABEL="Daten" UUID="1B790C645D875219" TYPE="ntfs" 
/dev/sda9: UUID="51fac766-5229-41e0-8a4f-db3615fe2409" TYPE="ext4" 
/dev/sda10: LABEL="Download" UUID="5C5D7A444F9E29F4" TYPE="ntfs" 
walter@Walter-NB:~$

Ich muß Windows7 in der grub händisch eintragen dann gehts.

Meine Frage, warum wird Win7 bei der installation von Ubuntu nicht erkannt?

Gruß
lewendi

Herz-von-Hessen · 21 März 2012

Hallo lewendi,

lewendi schrieb:
Nachdem ich auf meinem NB Ubuntu zusätzlich zum bestehenden Windows7 installiert habe wird Windows nicht im Boootmanager erkannt.
Als Windows wird im Bootmanager die "HDDRECOVERY" erkannt.
Windows7 ist aber "TI30632000A"

Wie sieht denn die /boot/grub.menu.lst genau aus?
Hast Du mal YAST gestartet um den Bootloader anzupassen?

lewendi schrieb:
Hier mal das Ergebnis von blkid

besser wäre wohl

Code:

fdisk -l
lsblk

lieben Gruß aus Hessen

Geier0815 · 21 März 2012

@Herz-von-Hessen,

Ubuntu verwendet normalerweise Grub2, da ist nix mit menu.list.

@lewendi,

wo trägst Du die Windows-Partition denn ein? Normalerweise sollte das Auffinden von Partitionen und Systemen über die /etc/grub.d/30_os-prober laufen. Schau doch mal ins ubutu-wiki.

lewendi · 22 März 2012

fdisk -l ergibt:

Code:

fdisk -l
  Gerät  boot.     Anfang        Ende     Blöcke   Id  System
/dev/sda1   *           1         192     1542208+  27  Unbekannt
/dev/sda2             193       10626    83811105    7  HPFS/NTFS
/dev/sda3           10627       37997   219857527    f  W95 Erw. (LBA)
/dev/sda4           37998       38914     7356416   17  Verst. HPFS/NTFS
/dev/sda5           10627       13199    20667591   83  Linux
/dev/sda6           13200       20291    56966458+  83  Linux
/dev/sda7           20292       20553     2104483+  82  Linux Swap / Solaris
/dev/sda8           20554       27181    53239378+   7  HPFS/NTFS
/dev/sda9           27182       34273    56966458+  83  Linux
/dev/sda10          35727       37997    18241776    7  HPFS/NTFS
walter@Walter-NB:~$

Das ist die /etc/grub.d/30_os-prober

Code:

#! /bin/sh
set -e

# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009  Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or

# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB.  If not, see <http://www.gnu.org/licenses/>.

prefix=/usr
exec_prefix=${prefix}
libdir=${exec_prefix}/lib

. ${libdir}/grub/grub-mkconfig_lib



found_other_os=

make_timeout () {
  if [ "x${found_other_os}" = "x" ] ; then
    if [ "x${1}" != "x" ] ; then
      if [ "x${GRUB_HIDDEN_TIMEOUT_QUIET}" = "xtrue" ] ; then
	verbose=
      else
	verbose=" --verbose"
      fi

      if [ "x${1}" = "x0" ] ; then
	cat <<EOF
if [ "x\${timeout}" != "x-1" ]; then
  if keystatus; then
    if keystatus --shift; then
      set timeout=-1
    else
      set timeout=0
    fi
  else
    if sleep$verbose --interruptible 3 ; then
      set timeout=0
    fi
  fi
fi
EOF
      else
	cat << EOF
if [ "x\${timeout}" != "x-1" ]; then
  if sleep$verbose --interruptible ${GRUB_HIDDEN_TIMEOUT} ; then
    set timeout=0
  fi
fi
EOF
      fi
    fi
  fi
}

adjust_timeout () {
  if [ "x$GRUB_BUTTON_CMOS_ADDRESS" != "x" ]; then
    cat <<EOF
if cmostest $GRUB_BUTTON_CMOS_ADDRESS ; then
EOF
    make_timeout "${GRUB_HIDDEN_TIMEOUT_BUTTON}" "${GRUB_TIMEOUT_BUTTON}"
    echo else
    make_timeout "${GRUB_HIDDEN_TIMEOUT}" "${GRUB_TIMEOUT}"
    echo fi
  else
    make_timeout "${GRUB_HIDDEN_TIMEOUT}" "${GRUB_TIMEOUT}"
  fi
}

if [ "x${GRUB_DISABLE_OS_PROBER}" = "xtrue" ]; then
  adjust_timeout
  exit 0
fi

if [ -z "`which os-prober 2> /dev/null`" -o -z "`which linux-boot-prober 2> /dev/null`" ] ; then
  # missing os-prober and/or linux-boot-prober
  adjust_timeout
  exit 0
fi

OSPROBED="`os-prober | tr ' ' '^' | paste -s -d ' '`"
if [ -z "${OSPROBED}" ] ; then
  # empty os-prober output, nothing doing
  adjust_timeout
  exit 0
fi

osx_entry() {
        cat << EOF
menuentry "${LONGNAME} (${2}-bit) (on ${DEVICE})" --class osx --class darwin --class os {
EOF
	save_default_entry | sed -e "s/^/\t/"
	prepare_grub_to_access_device ${DEVICE} | sed -e "s/^/\t/"
	cat << EOF
        load_video
        set do_resume=0
        if [ /var/vm/sleepimage -nt10 / ]; then
           if xnu_resume /var/vm/sleepimage; then
             set do_resume=1
           fi
        fi
        if [ \$do_resume = 0 ]; then
           xnu_uuid ${OSXUUID} uuid
           if [ -f /Extra/DSDT.aml ]; then
              acpi -e /Extra/DSDT.aml
           fi
           $1 /mach_kernel boot-uuid=\${uuid} rd=*uuid
           if [ /System/Library/Extensions.mkext -nt /System/Library/Extensions ]; then
              xnu_mkext /System/Library/Extensions.mkext
           else
              xnu_kextdir /System/Library/Extensions/etc/grub.d/30_os-prober
           fi
           if [ -f /Extra/Extensions.mkext ]; then
              xnu_mkext /Extra/Extensions.mkext
           fi
           if [ -d /Extra/Extensions ]; then
              xnu_kextdir /Extra/Extensions
           fi/etc/grub.d/30_os-prober
           if [ -f /Extra/devprop.bin ]; then
              xnu_devprop_load /Extra/devprop.bin
           fi
           if [ -f /Extra/splash.jpg ]; then
              insmod jpeg/etc/grub.d/30_os-prober
              xnu_splash /Extra/splash.jpg
           fi
           if [ -f /Extra/splash.png ]; then
              insmod png
              xnu_splash /Extra/splash.png
           fi
           if [ -f /Extra/splash.tga ]; then
              insmod tga
              xnu_splash /Extra/splash.tga
           fi
        fi
}
EOF
}

for OS in ${OSPROBED} ; do
  DEVICE="`echo ${OS} | cut -d ':' -f 1`"
  LONGNAME="`echo ${OS} | cut -d ':' -f 2 | tr '^' ' '`"
  LABEL="`echo ${OS} | cut -d ':' -f 3 | tr '^' ' '`"
  BOOT="`echo ${OS} | cut -d ':' -f 4`"

  if [ -z "${LONGNAME}" ] ; then
    LONGNAME="${LABEL}"
  fi

  echo "Found ${LONGNAME} on ${DEVICE}" >&2
  found_other_os=1

  case ${BOOT} in
    chain)

      cat << EOF
menuentry "${LONGNAME} (on ${DEVICE})" --class windows --class os {
EOF
      save_default_entry | sed -e "s/^/\t/"
      prepare_grub_to_access_device ${DEVICE} | sed -e "s/^/\t/"

      case ${LONGNAME} in
	Windows\ Vista*|Windows\ 7*|Windows\ Server\ 2008*)
	;;
	*)
	  cat << EOF
	drivemap -s (hd0) \${root}
EOF
	;;
      esac

      cat <<EOF
	chainloader +1
}
EOF
    ;;
    linux)
      LINUXPROBED="`linux-boot-prober ${DEVICE} 2> /dev/null | tr ' ' '^' | paste -s -d ' '`"
      prepare_boot_cache=

      for LINUX in ${LINUXPROBED} ; do
        LROOT="`echo ${LINUX} | cut -d ':' -f 1`"
        LBOOT="`echo ${LINUX} | cut -d ':' -f 2`"
        LLABEL="`echo ${LINUX} | cut -d ':' -f 3 | tr '^' ' '`"/etc/grub.d/30_os-prober
        LKERNEL="`echo ${LINUX} | cut -d ':' -f 4`"
        LINITRD="`echo ${LINUX} | cut -d ':' -f 5`"
        LPARAMS="`echo ${LINUX} | cut -d ':' -f 6- | tr '^' ' '`"

        if [ -z "${LLABEL}" ] ; then
          LLABEL="${LONGNAME}"
        fi

	if [ "${LROOT}" != "${LBOOT}" ]; then
	  LKERNEL="${LKERNEL#/boot}"
	  LINITRD="${LINITRD#/boot}"
	fi

        cat << EOF
menuentry "${LLABEL} (on ${DEVICE})" --class gnu-linux --class gnu --class os {
EOF
	save_default_entry | sed -e "s/^/\t/"
	if [ -z "${prepare_boot_cache}" ]; then
	  prepare_boot_cache="$(prepare_grub_to_access_device ${LBOOT} | sed -e "s/^/\t/")"
	fi
	printf '%s\n' "${prepare_boot_cache}"
	cat <<  EOF
	linux ${LKERNEL} ${LPARAMS}
EOF
        if [ -n "${LINITRD}" ] ; then
          cat << EOF
	initrd ${LINITRD}
EOF
        fi
        cat << EOF/etc/grub.d/30_os-prober
}
EOF
      done
    ;;
    macosx)
      OSXUUID="`grub-probe --target=fs_uuid --device ${DEVICE} 2> /dev/null`"
      osx_entry xnu_kernel 32
      osx_entry xnu_kernel64 64
    ;;
    hurd)
      cat << EOF
menuentry "${LONGNAME} (on ${DEVICE})" --class hurd --class gnu --class os {
EOF
      save_default_entry | sed -e "s/^/\t/"
      prepare_grub_to_access_device ${DEVICE} | sed -e "s/^/\t/"
      grub_device="`${grub_probe} --device ${DEVICE} --target=drive`"
      mach_device="`echo "${grub_device}" | sed -e 's/(\(hd.*\),msdos\(.*\))/\1s\2/'`"
      grub_fs="`${grub_probe} --device ${DEVICE} --target=fs`"
      case "${grub_fs}" in
	*fs)	hurd_fs="${grub_fs}" ;;
	*)	hurd_fs="${grub_fs}fs" ;;
      esac
      cat << EOF
	multiboot /boot/gnumach.gz root=device:${mach_device}
	module /hurd/${hurd_fs}.static ${hurd_fs} --readonly \\
			--multiboot-command-line='\${kernel-command-line}' \\
			--host-priv-port='\${host-port}' \\
			--device-master-port='\${device-port}' \\
			--exec-server-task='\${exec-task}' -T typed '\${root}' \\
			'\$(task-create)' '\$(task-resume)'
	module /lib/ld.so.1 exec /hurd/exec '\$(exec-task=task-create)'
}
EOF
    ;;
    *)
      echo "  ${LONGNAME} is not yet supported by grub-mkconfig." >&2
    ;;
  esac
done

adjust_timeout

Windows Partition wird nicht erkannt

lewendi

Herz-von-Hessen

Geier0815

lewendi