lOtz1009 schrieb:Wenn das Notebook einen integrierten WLAN-Chip hat dürfte das gehen.
→ /sbin/lspci -nn
→ /usr/sbin/hwinfo --wlan
→ /usr/sbin/hwinfo --netcard
→ lsusb
Passwort:
notebook:~ # /sbin/lspci -nn
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate [1022:9601]
00:01.0 PCI bridge [0604]: Micro-Star International Co., Ltd. Device [1462:9602]
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) [1022:9603]
00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) [1022:9604]
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606]
00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) [1022:9607]
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (rev 40)
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 41)
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (rev 40)
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] (rev 40)
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc M880G [Mobility Radeon HD 4200] [1002:9712]
01:05.1 Audio device [0403]: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] [1002:970f]
02:00.0 VGA compatible controller [0300]: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] [1002:68e0]
03:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30)
03:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30)
03:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2393] (rev 30)
03:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2394] (rev 30)
04:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller [10ec:8172] (rev 10)
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
notebook:~ #
notebook:~ # /usr/sbin/hwinfo --netcard
36: PCI 400.0: 0280 Network controller
[Created at pci.318]
Unique ID: YmUS.4GgS9ERN_fA
Parent ID: H0_h.UWNv0BzDkeE
SysFS ID: /devices/pci0000:00/0000:00:06.0/0000:04:00.0
SysFS BusID: 0000:04:00.0
Hardware Class: network
Model: "Realtek Network controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8172
SubVendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
SubDevice: pci 0x8172
Revision: 0x10
I/O Ports: 0xd800-0xd8ff (rw)
Memory Range: 0xfe8fc000-0xfe8fffff (rw,non-prefetchable)
IRQ: 10 (no events)
Module Alias: "pci:v000010ECd00008172sv000010ECsd00008172bc02sc80i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #12 (PCI bridge)
37: PCI 500.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.h7e4TMvvSj8
Parent ID: M71A.+wJfVl4xF1F
SysFS ID: /devices/pci0000:00/0000:00:07.0/0000:05:00.0
SysFS BusID: 0000:05:00.0
Hardware Class: network
Model: "Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8168 "RTL8111/8168B PCI Express Gigabit Ethernet controller"
SubVendor: pci 0x1462 "Micro-Star International Co., Ltd."
SubDevice: pci 0x106c
Revision: 0x06
Driver: "r8169"
Driver Modules: "r8169"
Device File: eth0
I/O Ports: 0xe800-0xe8ff (rw)
Memory Range: 0xfdfff000-0xfdffffff (ro,non-prefetchable)
Memory Range: 0xfdff8000-0xfdffbfff (ro,non-prefetchable)
Memory Range: 0xfe9e0000-0xfe9fffff (ro,non-prefetchable,disabled)
IRQ: 29 (10253 events)
HW Address: 40:61:86:af:62:22
Link detected: yes
Module Alias: "pci:v000010ECd00008168sv00001462sd0000106Cbc02sc00i00"
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #13 (PCI bridge)
notebook:~ #
notebook:~ # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
notebook:~ #
notebook:~ # uname -a
Linux notebook 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 i686 athlon i386 GNU/Linux
notebook:~ # ^C
notebook:~ #
E-Mail? :???:lin schrieb:vielen Dank für deine schnelle E-Mail.
Kann nicht sein, weil:lin schrieb:Wie kann ich auf opensuse 11.4
Das wäre dann eher openSUSE 11.3.lin schrieb:Code:notebook:~ # uname -a Linux notebook 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 i686 athlon i386 GNU/Linux
Nicht notwendig, dass Ergebnis wäre in diesen Fall nur wichtig gewesen und wenn dort halt nichts erscheint, so wie bei dir und hier:lin schrieb:grundsätzlich gefragt: Wie kann ich den dies sichtbar machen was da im Resultat so schnell durchläuft...
klapptisch:~ # find /lib/modules/ | grep 92se
klapptisch:~ #
dazu kommt, dann können wir dir eventuell noch besser helfen. Pauschal würde ich jetzt ein:Grothesk schrieb:http://www.linux-club.de/viewtopic.php?f=19&t=93338
Bitte mal die entsprechende Ausgabedatei hier posten.
zypper -p http://download.opensuse.org/repositories/driver:/wireless/11.3-update/ in rtl8192se-kmp-desktop rtl8192se-firmware
k:~> su
Passwort:
notebook:/home/martin # zypper -p http://download.opensuse.org/repositories/driver:/wireless/11.3-update/ in rtl8192se-kmp-desktop rtl8192se-firmware
Repository 'http://download.opensuse.org/repositories/driver:/wireless/11.3-updaRepository 'http://download.opensuse.org/repositories/driver:/wireless/11.3-updaRepository 'http://download.opensuse.org/repositories/driver:/wireless/11.3-updaRepository 'http://download.opensuse.org/repositories/driver:/wireless/11.3-updaRepository 'http://download.opensuse.org/repositories/driver:/wireless/11.3-updaRepository 'http://download.opensuse.org/repositories/driver:/wireless/11.3-updaRepository 'http://download.opensuse.org/repositories/driver:/wireless/11.3-update/' wird hinzugefügt [fertig]
Repository 'http://download.opensuse.org/repositories/driver:/wireless/11.3-update/' erfolgreich hinzugefügt
Aktiviert: Ja
Autoaktualisierung: Ja
URI: http://download.opensuse.org/repositories/driver:/wireless/11.3-update/
Metadaten von Repository 'http://download.opensuse.org/repositories/driver:/wireless/11.3-update/' werden abgerufen [|]
Neuen Signierungsschlüssel für Repository oder Paket erhalten:
Schlüssel-ID: 5308B44C4073BDBE
Schlüsselname: driver:wireless OBS Project <driver:wireless@build.opensuse.org>
Schlüsselfingerabdruck: E2FE2C7CDBC34646FB0A0D3C5308B44C4073BDBE
Key Created: Di 22 Jan 2008 21:47:09 CET
Key Expires: Do 01 Apr 2010 22:47:09 CEST (ABGELAUFEN)
Repository: http://download.opensuse.org/repositories/driver:/wireless/11.3-update/
Wollen Sie den Schlüssel (a)bweisen, ihm (t)emporär oder (i)mmer vertrauen? [a/t/i/?] (a): i
Metadaten von Repository 'http://download.opensuse.org/repositories/driver:/wireless/11.3-update/' werden abgerufen [fertig]
Zwischenspeicher für Repository 'http://download.opensuse.org/repositories/driver:/wireless/11.3-update/' wird erzeugt [fertig]
Daten des Repositorys laden ...
Installierte Pakete lesen ...
Paketabhängigkeiten auflösen ...
Die folgenden NEUEN Pakete werden installiert:
rtl8192se-firmware rtl8192se-kmp-desktop
2 neue Pakete zu installieren.
Gesamtgröße des Downloads: 273,0 KiB. Nach der Operation werden zusätzlich 827,0 KiB belegt.
Fortfahren? [j/n/?] (j): j
Paket rtl8192se-firmware-0019.1207.2010-1.4.noarch wird abgerufen (1/2), 67,0 KiB (251,0 KiB entpackt)
Abruf: rtl8192se-firmware-0019.1207.2010-1.4.noarch.rpm [fertig]
Installation von: rtl8192se-firmware-0019.1207.2010-1.4 [fertig]
Paket rtl8192se-kmp-desktop-0019.1207.2010_k2.6.34.7_0.7-1.4.i586 wird abgerufen (2/2), 206,0 KiB (576,0 KiB entpackt)
Abruf: rtl8192se-kmp-desktop-0019.1207.2010_k2.6.34.7_0.7-1.4.i586.rpm [fertig (0 B/s)]
Installation von: rtl8192se-kmp-desktop-0019.1207.2010_k2.6.34.7_0.7-1.4 [fertig]
Repository 'http://download.opensuse.org/repositories/driver:/wireless/11.3-update/' wird entfernt [fertig]
Repository 'http://download.opensuse.org/repositories/driver:/wireless/11.3-update/' wurde entfernt.
notebook:/home/martin #
Keine Ahnung, wenn die Karte jetzt die passenden Module lädt... wahrscheinlich. Aber leider fehlen hier noch ein paar Informationen, welche zuvor schon erwähnt wurden.lin schrieb:Kann ich jetzt irgendwo die Einstellungen vornehmen
Bessser wäre aber:lOtz1009 schrieb:→ /sbin/lspci -nn
/sbin/lspci -nn | grep -i -A2 net
lOtz1009 schrieb:→ /usr/sbin/hwinfo --wlan
→ /usr/sbin/hwinfo --netcard
Grothesk schrieb:http://www.linux-club.de/viewtopic.php?f=19&t=93338
Bitte mal die entsprechende Ausgabedatei hier posten.
martin@notebook:~> su
Passwort:
notebook:/home/martin # /sbin/lspci -nn | grep -i -A2 net
04:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller [10ec:8172] (rev 10)
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
notebook:/home/martin #
collectNWData.sh V0.6.2.0 (Rev: 1.189, Build: 2010/01/08 19:14:18 UTC)
--- Which type of your network connection should be tested?
--- (1) Wired connection
--- What's the type of networktopology?
--- (1) DSL modem <---> LinuxClient
--- On which host is the script executed?
--- (1) LinuxClient
!!! CND0230W: IPV6 enabled
!!! CND0310W: Classic network configuration with ifup was detected. Configuration with knetworkmanager is much easier
--- Go to #English to get more detailed instructions about the error/warning messages and how to fix the problems on your own
--- Place the contents of file collectNWData.txt in the net (see http://www.linux-tips-and-tricks.de/CND_UPL#English for links) and then paste the nopaste link on your favorite Linux forum.
==================================================================================================================
==================================================================================================================
*** uname -a
Linux linux-q4rn 2.6.31.5-0.1-default #1 SMP 2009-10-26 15:49:03 +0100 i686 athlon i386 GNU/Linux
==================================================================================================================
*** cat /etc/*[-_]release || cat /etc/*[-_]version
/etc/SuSE-release
openSUSE 11.2 (i586)
VERSION = 11.2
==================================================================================================================
*** cat /etc/resolv | grep -i "nameserver"
nameserver 192.168.0.1
==================================================================================================================
*** cat /etc/hosts
127.0.0.1 localhost
127.0.0.2 linux-q4rn.site linux-q4rn
==================================================================================================================
*** route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
==================================================================================================================
*** ifconfig
eth0 Link encap:Ethernet HWaddr ##:##:##:##:##:#1
inet addr:192.168.0.108 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fee6:6fc7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1049 errors:0 dropped:0 overruns:0 frame:0
TX packets:1010 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:623028 (608.4 Kb) TX bytes:215248 (210.2 Kb)
Interrupt:18 Base address:0x1400
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:150 errors:0 dropped:0 overruns:0 frame:0
TX packets:150 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:14972 (14.6 Kb) TX bytes:14972 (14.6 Kb)
==================================================================================================================
*** ping tests
Ping of 195.135.220.3 OK
Ping of www.suse.de OK
==================================================================================================================
*** dhcpcd-test
eth0: DHCP server available
==================================================================================================================
*** lspci
00:11.0 Ethernet controller [0200]: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 10)
==================================================================================================================
*** lsusb
==================================================================================================================
*** hwinfo (filtered)
17: PCI 11.0: 0200 Ethernet controller
Model: "AMD PCnet - Fast 79C971"
Vendor: pci 0x1022 "AMD"
Device: pci 0x2000 "79c970 [PCnet32 LANCE]"
SubVendor: pci 0x1022 "AMD"
SubDevice: pci 0x2000 "PCnet - Fast 79C971"
Driver: "pcnet32"
Driver Modules: "pcnet32"
Device File: eth0
Link detected: yes
Driver Status: pcnet32 is active
Driver Activation Cmd: "modprobe pcnet32"
Driver Status: vmxnet is active
Driver Activation Cmd: "modprobe vmxnet"
==================================================================================================================
*** lsmod # (filtered)
| ac | af_packet | ata_piix | container | crc16 |
| edd | floppy | fscache | fuse | hwmon |
| i2c_core | i2c_piix4 | intel_agp | ip6t_LOG | ip6t_REJECT |
| iptable_raw | jbd2 | libata | mptbase | mptctl |
| mptscsih | mptspi | nf_conntrack_ipv4| nf_conntrack_netbios_ns| pci_hotplug |
| pcnet32 | piix | ppdev | scsi_transport_spi| sg |
| shpchp | sr_mod | thermal | thermal_sys | vmblock |
| vmmemctl | vmsync | vmxnet | xt_NOTRACK | xt_limit |
| xt_pkttype | xt_state | xt_tcpudp |
==================================================================================================================
*** cat /etc/sysconfig/network/ifcfg-eth0 | egrep -v ".*=''"
BOOTPROTO='dhcp'
NAME='79c970 [PCnet32 LANCE]'
STARTMODE='auto'
USERCONTROL='no'
==================================================================================================================
*** NWElizaStates
IF:eth0 IM:1 DI:1 dI:0 NIC:0 cNiC:1:0 NI:0 cNI:0 PNG:0 DNS:0 MTU:1 NISS:0 IP6:1 KM:0 WLW:0 RTDT:SuSE
[/code]
hmmm tomm.fa - was genau soll ich denn da machen!? Sind in dem Listing denn mehrere Teilbefehle enthalten die ich Teilbefehl für Teilbefehl abarbeiten soll!?
Den ganzen Block kann ich kaum -( das geht gar nicht) in die Kommandozeile so übergeben.
Habe oben also erstmal den von dir geposteten Befehl ausgeführt und das Ergebniss gepostet.
Wenn du aber noch mehr Infos brauchst - lass mich das wissen.
martin@notebook:~> su
Passwort:
notebook:/home/martin # /sbin/lspci -nn | grep -i -A2 net
04:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller [10ec:8172] (rev 10)
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
notebook:/home/martin #
Glaube mir, dass möchtest du nicht hören. Aber schreiben kann ich noch was zum Thema.lin schrieb:Freu mich wenn du noch was sagts
Generell hast du bei dir aber schon WLAN zur Verfügung; weshalb dann Wired connection? Welche Meldung gibt denn jetzt ein:lin schrieb:--- Which type of your network connection should be tested?
--- (1) Wired connection
--- What's the type of networktopology?
--- (1) DSL modem <---> LinuxClient
modprobe -v r8192se_pci
notebook:/home/martin # modprobe -v r8192se_pci
notebook:/home/martin #
notebook:/home/martin # modprobe -v r8192se_pci
notebook:/home/martin # ..
notebook:/home # ..
notebook:/ #
notebook:/ # su
notebook:/ # modprobe -v r8192se_pci
notebook:/ #
notebook:/ #
notebook:/ #
notebook:/ #
notebook:/ # lsmod
Module Size Used by
ip6t_LOG 5150 6
xt_tcpudp 2107 2
xt_pkttype 912 3
ipt_LOG 5119 6
xt_limit 1705 12
snd_pcm_oss 47613 0
snd_mixer_oss 16751 1 snd_pcm_oss
snd_seq 57343 0
snd_seq_device 6598 1 snd_seq
edd 8720 0
af_packet 19512 0
ip6t_REJECT 4311 3
nf_conntrack_ipv6 18225 4
cpufreq_conservative 10064 0
ip6table_raw 1187 1
cpufreq_userspace 2583 0
cpufreq_powersave 914 0
xt_NOTRACK 816 4
powernow_k8 18707 0
ipt_REJECT 2152 3
mperf 1255 1 powernow_k8
xt_state 1162 8
iptable_raw 1246 1
iptable_filter 1418 1
ip6table_mangle 1588 0
nf_conntrack_netbios_ns 1382 0
nf_conntrack_ipv4 8691 4
nf_conntrack 75628 5 nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntrack_netbios_ns,nf_conntrack_ipv4
nf_defrag_ipv4 1201 1 nf_conntrack_ipv4
ip_tables 12172 2 iptable_raw,iptable_filter
ip6table_filter 1359 1
ip6_tables 13508 4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter
x_tables 17098 16 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,ip6table_raw,xt_NOTRACK,ipt_REJECT,xt_state,iptable_raw,iptable_filter,ip6table_mangle,ip_tables,ip6table_filter,ip6_tables
loop 14694 0
dm_mod 73457 0
snd_hda_codec_atihdmi 2591 1
snd_hda_codec_realtek 236011 1
snd_hda_intel 24950 6
snd_hda_codec 98635 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6164 1 snd_hda_codec
snd_pcm 87882 4 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 21669 3 snd_seq,snd_pcm
snd 65724 20 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
sdhci_pci 7110 0
sr_mod 14671 0
soundcore 7379 1 snd
sdhci 20020 1 sdhci_pci
sg 27872 0
snd_page_alloc 8041 2 snd_hda_intel,snd_pcm
r8192se_pci 500562 0
wmi 7467 0
i2c_piix4 11574 0
pcspkr 1614 0
joydev 9354 0
k10temp 2723 0
cdrom 38085 1 sr_mod
battery 9730 0
ac 3083 0
r8169 38911 0
video 21205 0
mmc_core 72345 1 sdhci
shpchp 30104 0
pci_hotplug 28749 1 shpchp
button 5449 0
radeon 818174 2
ttm 55874 1 radeon
drm_kms_helper 29180 1 radeon
drm 180503 4 radeon,ttm,drm_kms_helper
i2c_algo_bit 5604 1 radeon
fan 3539 0
processor 40761 1 powernow_k8
ata_generic 2743 0
pata_atiixp 3564 0
thermal 17357 0
thermal_sys 14678 4 video,fan,processor,thermal
notebook:/ #
notebook:/ # modprobe -l | grep 81
kernel/drivers/net/wireless/rtl818x/rtl8180.ko
kernel/drivers/net/wireless/rtl818x/rtl8187.ko
kernel/drivers/net/8139cp.ko
kernel/drivers/net/8139too.ko
kernel/drivers/net/r8169.ko
kernel/drivers/net/amd8111e.ko
kernel/drivers/net/usb/rtl8150.ko
kernel/drivers/gpu/drm/i810/i810.ko
kernel/drivers/usb/host/sl811-hcd.ko
kernel/drivers/usb/host/sl811_cs.ko
kernel/drivers/rtc/rtc-rx8581.ko
kernel/drivers/i2c/busses/i2c-amd8111.ko
kernel/drivers/media/video/bt819.ko
kernel/drivers/media/dvb/frontends/l64781.ko
kernel/drivers/hwmon/w83781d.ko
kernel/drivers/isdn/hisax/hisax_st5481.ko
kernel/drivers/staging/rtl8187se/r8187se.ko
kernel/drivers/staging/rtl8192su/r8192s_usb.ko
kernel/drivers/staging/rtl8192u/r8192u_usb.ko
kernel/drivers/staging/rtl8192e/r8192e_pci.ko
kernel/drivers/video/i810/i810fb.ko
kernel/sound/pci/snd-cs4281.ko
kernel/sound/pci/au88x0/snd-au8810.ko
weak-updates/updates/r8192se_pci.ko
notebook:/ #
notebook:/ # find /lib/modules | grep r81
/lib/modules/2.6.34.7-0.5-desktop/kernel/drivers/staging/rtl8192e/r8192e_pci.ko
/lib/modules/2.6.34.7-0.5-desktop/kernel/drivers/staging/rtl8192u/r8192u_usb.ko
/lib/modules/2.6.34.7-0.5-desktop/kernel/drivers/staging/rtl8192su/r8192s_usb.ko
/lib/modules/2.6.34.7-0.5-desktop/kernel/drivers/staging/rtl8187se/r8187se.ko
/lib/modules/2.6.34.7-0.5-desktop/kernel/drivers/net/r8169.ko
/lib/modules/2.6.34.7-0.5-desktop/weak-updates/updates/r8192se_pci.ko
/lib/modules/2.6.34.7-0.7-desktop/updates/r8192se_pci.ko
notebook:/ #
martin@notebook:~> su
Passwort:
notebook:/home/martin # hwinfo --netcard
36: PCI 400.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: y9sn.6hYtgnRUOv8
Parent ID: H0_h.UWNv0BzDkeE
SysFS ID: /devices/pci0000:00/0000:00:06.0/0000:04:00.0
SysFS BusID: 0000:04:00.0
Hardware Class: network
Model: "Realtek WLAN controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8172
SubVendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
SubDevice: pci 0x8172
Revision: 0x10
Driver: "rtl819xSE"
Driver Modules: "r8192se_pci"
Device File: wlan0
Features: WLAN
I/O Ports: 0xd800-0xd8ff (rw)
Memory Range: 0xfe8fc000-0xfe8fffff (rw,non-prefetchable)
IRQ: 18 (173054 events)
HW Address: 1c:4b:d6:eb:40:ee
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
WLAN bitrates: 1 2 5.5 11 6 9 12 18 24 36 48 54
WLAN encryption modes: TKIP CCMP
WLAN authentication modes: open wpa-psk wpa-eap
Module Alias: "pci:v000010ECd00008172sv000010ECsd00008172bc02sc80i00"
Driver Info #0:
Driver Status: r8192se_pci is active
Driver Activation Cmd: "modprobe r8192se_pci"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #12 (PCI bridge)
37: PCI 500.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.h7e4TMvvSj8
Parent ID: M71A.+wJfVl4xF1F
SysFS ID: /devices/pci0000:00/0000:00:07.0/0000:05:00.0
SysFS BusID: 0000:05:00.0
Hardware Class: network
Model: "Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8168 "RTL8111/8168B PCI Express Gigabit Ethernet controller"
SubVendor: pci 0x1462 "Micro-Star International Co., Ltd."
SubDevice: pci 0x106c
Revision: 0x06
Driver: "r8169"
Driver Modules: "r8169"
Device File: eth0
I/O Ports: 0xe800-0xe8ff (rw)
Memory Range: 0xfdfff000-0xfdffffff (ro,non-prefetchable)
Memory Range: 0xfdff8000-0xfdffbfff (ro,non-prefetchable)
Memory Range: 0xfe9e0000-0xfe9fffff (ro,non-prefetchable,disabled)
IRQ: 29 (27242 events)
HW Address: 40:61:86:af:62:22
Link detected: yes
Module Alias: "pci:v000010ECd00008168sv00001462sd0000106Cbc02sc00i00"
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #13 (PCI bridge)
notebook:/home/martin #
Lösche alle vorhanden Konfigurationen in YaST und richte die Verbindung über dem (K)NetworkManager ein (siehe dazu auch: Klick).Driver Status: r8192se_pci is active
Driver Activation Cmd: "modprobe r8192se_pci"
Schnelles Löschen der Konfigurationsdateien über die Kommandozeile: Wer keine Lust hat sich durch die YAST Fenster zu hangeln um die Konfigurationsdateien zu löschen kann dieses in einem Konsolenfenster viel schneller erledigen. Dazu muss man ein Befehlsfenster öffnen durch Drücken von ALT-F2 und Eingabe von konsole. Danach muss man root werden mit
su -
und kann dann den folgenden Befehl ausführen (Am besten mit copy und paste in das Befehlsfenster kopieren).
cd /etc/sysconfig/network; ls ifcfg-[earw]* | perl -p -e '{ chomp; `mv $_ $_\.old`; }
Passwort:
notebook:~ # cd /etc/sysconfig/network; ls ifcfg-[earw]* | perl -p -e '{ chomp; `mv $_ $_\.old`; }
> cd /etc/sysconfig/network; ls ifcfg-[earw]* | perl -p -e '{ chomp; `mv $_ $_\.old`; }
-bash: syntax error near unexpected token `}'
notebook:~ #
notebook:~ # cd /etc/sysconfig/network;
ls ifcfg-[earw]* | perl -p -e '{ chomp; `mv $_ $_\.old`; }
Da fehlt ein Apostroph am Schluß:lin schrieb:cd /etc/sysconfig/network; ls ifcfg-[earw]* | perl -p -e '{ chomp; `mv $_ $_\.old`; }
cd /etc/sysconfig/network; ls ifcfg-[earw]* | perl -p -e '{ chomp; `mv $_ $_\.old`; }'
-bash: syntax error near unexpected token `}'
notebook:~ # dfd
If 'dfd' is not a typo you can use command-not-found to lookup the package that contains it, like this:
cnf dfd
notebook:~ # cd /etc/sysconfig/network; ls ifcfg-[earw]* | perl -p -e '{ chomp; `mv $_ $_\.old`; }'
ifcfg-eth0notebook:/etc/sysconfig/network # cd /etc/sysconfig/network;
notebook:/etc/sysconfig/network #
notebook:/etc/sysconfig/network #
notebook:/etc/sysconfig/network # ls ifcfg-[earw]* | perl -p -e '{ chomp; `mv $_ $_\.old`; }'
ifcfg-eth0.oldnotebook:/etc/sysconfig/network #