Systemcrasher
Hacker
Hallo Leute, ich habe die Frage hier http://www.suseusers.de/viewtopic.php?f=4&t=563 schon mal gestellt. (Dort findet Ihr auch die nötigen Infos).
Leider konnte mir da nicht weitergeholfen werden.
Hat hier jemand eine Idee bzw. einen Anfängerfreundlichen Tip?
Nachtrag:
Auf mehrfachen Wunsch (per PM) hier nochmal direkt die Daten:
PS: Bitte oben stehende Verlinkung ins andere Forum beachten (Crossposting)
Leider konnte mir da nicht weitergeholfen werden.
Hat hier jemand eine Idee bzw. einen Anfängerfreundlichen Tip?
Nachtrag:
Auf mehrfachen Wunsch (per PM) hier nochmal direkt die Daten:
Nach der Neuinstallation etc. habe ich immer noch Probs mit dem USB:
- über den Drucker wird er erkannt und ich kann ihn auslesen (USB-LED leuchtet gleichmäßig).
- Direkt vorne am Rechner dagegen passiert nichts (LED blinkt heftig und dauerhaft).
Code:tail -f /var/log/messages ergibt Code: Aug 5 11:21:21 linux-g987 kernel: usb 4-5: new high speed USB device using ehci_hcd and address 50 Aug 5 11:21:21 linux-g987 kernel: hub 4-0:1.0: unable to enumerate USB device on port 5 Aug 5 11:21:21 linux-g987 kernel: usb 4-5: new high speed USB device using ehci_hcd and address 51 Aug 5 11:21:21 linux-g987 kernel: hub 4-0:1.0: unable to enumerate USB device on port 5 Aug 5 11:21:22 linux-g987 kernel: hub 4-0:1.0: unable to enumerate USB device on port 5 Aug 5 11:21:22 linux-g987 kernel: usb 4-5: new high speed USB device using ehci_hcd and address 53 (Auszug) Andererseits: Code: linux-g987:~ # hwinfo --usb 02: SCSI 200.0: 10600 Disk [Created at block.254] UDI: /org/freedesktop/Hal/devices/storage_serial_Brother_MFC_260C_BROG7F298581 _0_0 Unique ID: bpOY.1aU4XQ4x0M2 SysFS ID: /class/block/sdb SysFS BusID: 2:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.2/host2/tar get2:0:0/2:0:0:0 Hardware Class: disk Model: "Brother MFC-260C" Vendor: usb 0x04f9 "Brother" Device: usb 0x01d6 "MFC-260C" Revision: "1.00" Serial ID: "BROG7F298581" Driver: "usb-storage", "sd" Driver Modules: "usb_storage" Device File: /dev/sdb (/dev/sg2) Device Files: /dev/sdb, /dev/disk/by-id/usb-Brother_MFC-260C_BROG7F298581-0:0, /dev/disk/by-path/pci-0000:00:10.0-usb-0:2:1.2-scsi-0:0:0:0 Device Number: block 8:16-8:31 (char 21:2) Features: Hotpluggable Geometry (Logical): CHS 1024/0/62 Speed: 12 Mbps Module Alias: "usb:v04F9p01D6d0100dc00dsc00dp00ic08isc06ip50" Driver Info #0: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Drive status: no medium Config Status: cfg=no, avail=yes, need=no, active=unknown 04: USB 00.0: 10a00 Hub [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_10_3_if0 Unique ID: k4bc.HJH4vdOnhl8 SysFS ID: /devices/pci0000:00/0000:00:10.3/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux 2.6.27.25-0.1-pae ehci_hcd EHCI Host Controller" Hotplug: USB Vendor: usb 0x1d6b "Linux 2.6.27.25-0.1-pae ehci_hcd" Device: usb 0x0002 "EHCI Host Controller" Revision: "2.06" Serial ID: "0000:00:10.3" Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=no, avail=yes, need=no, active=unknown 05: USB 00.0: 10a00 Hub [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_0_if0 Unique ID: pBe4.5nw7MPEyvh9 SysFS ID: /devices/pci0000:00/0000:00:10.0/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux 2.6.27.25-0.1-pae uhci_hcd UHCI Host Controller" Hotplug: USB Vendor: usb 0x1d6b "Linux 2.6.27.25-0.1-pae uhci_hcd" Device: usb 0x0001 "UHCI Host Controller" Revision: "2.06" Serial ID: "0000:00:10.0" Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=no, avail=yes, need=no, active=unknown 06: USB 00.0: 10a00 Hub [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_1_if0 Unique ID: uIhY.sV+ij91gsz0 SysFS ID: /devices/pci0000:00/0000:00:10.1/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux 2.6.27.25-0.1-pae uhci_hcd UHCI Host Controller" Hotplug: USB Vendor: usb 0x1d6b "Linux 2.6.27.25-0.1-pae uhci_hcd" Device: usb 0x0001 "UHCI Host Controller" Revision: "2.06" Serial ID: "0000:00:10.1" Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=no, avail=yes, need=no, active=unknown 07: USB 00.0: 10a00 Hub [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_10_2_if0 Unique ID: zPk0.dE4I5wpNpF8 SysFS ID: /devices/pci0000:00/0000:00:10.2/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux 2.6.27.25-0.1-pae uhci_hcd UHCI Host Controller" Hotplug: USB Vendor: usb 0x1d6b "Linux 2.6.27.25-0.1-pae uhci_hcd" Device: usb 0x0001 "UHCI Host Controller" Revision: "2.06" Serial ID: "0000:00:10.2" Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=no, avail=yes, need=no, active=unknown 08: USB 00.0: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_86c_1047_noserial_if0 Unique ID: FKGF.nD8Yo4OBXe1 Parent ID: pBe4.5nw7MPEyvh9 SysFS ID: /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0 SysFS BusID: 2-1:1.0 Hardware Class: unknown Model: "DeTeWe - Deutsche Telephonwerke T-Com Eumex 520" Hotplug: USB Vendor: usb 0x086c "DeTeWe - Deutsche Telephonwerke AG & Co." Device: usb 0x1047 "T-Com Eumex 520" Revision: "1.00" Speed: 12 Mbps Module Alias: "usb:v086Cp1047d0100dcFFdscFFdpFFicFFiscFFipFF" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #5 (Hub) 09: USB 00.0: 10900 Printer [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_4f9_1d6_BROG7F298581_if0_printer_ noserial Unique ID: hSuP.CNChQpDiK52 Parent ID: pBe4.5nw7MPEyvh9 SysFS ID: /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0 SysFS BusID: 2-2:1.0 Hardware Class: printer Model: "Brother MFC-260C" Hotplug: USB Vendor: usb 0x04f9 "Brother Industries, Ltd" Device: usb 0x01d6 SubVendor: "Brother" SubDevice: "MFC-260C" Revision: "1.00" Serial ID: "BROG7F298581" Driver: "usblp" Driver Modules: "usblp" Device File: /dev/usb/lp0 Device Files: /dev/usb/lp0, /dev/usblp0, /dev/par0 Device Number: char 180:0 Speed: 12 Mbps Module Alias: "usb:v04F9p01D6d0100dc00dsc00dp00ic07isc01ip02" Driver Info #0: Driver Status: usblp is active Driver Activation Cmd: "modprobe usblp" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #5 (Hub) 10: USB 00.1: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_4f9_1d6_BROG7F298581_if1 Unique ID: 8e8U.AACdadXXTTC Parent ID: pBe4.5nw7MPEyvh9 SysFS ID: /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1 SysFS BusID: 2-2:1.1 Hardware Class: unknown Model: "Brother Industries Unclassified device" Hotplug: USB Vendor: usb 0x04f9 "Brother Industries, Ltd" Device: usb 0x01d6 Revision: "1.00" Serial ID: "BROG7F298581" Speed: 12 Mbps Module Alias: "usb:v04F9p01D6d0100dc00dsc00dp00icFFiscFFipFF" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #5 (Hub)
und
Code:linux-g987:~ # uname -a Linux linux-g987 2.6.27.25-0.1-pae #1 SMP 2009-07-01 15:37:09 +0200 i686 athlon i386 GNU/Linux linux-g987:~ #
Zum Vgl. Stick am Drucker:
Code:linux-g987:~ # tail -f /var/log/messages Aug 5 11:23:15 linux-g987 kernel: sd 2:0:0:0: [sdb] 1981440 512-byte hardware sectors: (1.01 GB/967 MiB) Aug 5 11:23:15 linux-g987 kernel: sd 2:0:0:0: [sdb] Write Protect is off Aug 5 11:23:15 linux-g987 kernel: sd 2:0:0:0: [sdb] Mode Sense: 1e 00 00 08 Aug 5 11:23:15 linux-g987 kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through Aug 5 11:23:15 linux-g987 kernel: sd 2:0:0:0: [sdb] 1981440 512-byte hardware sectors: (1.01 GB/967 MiB) Aug 5 11:23:15 linux-g987 kernel: sd 2:0:0:0: [sdb] Write Protect is off Aug 5 11:23:15 linux-g987 kernel: sd 2:0:0:0: [sdb] Mode Sense: 1e 00 00 08 Aug 5 11:23:15 linux-g987 kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through Aug 5 11:23:15 linux-g987 kernel: sdb: sdb1
bzw. Stick wieder abgezogen:
Code:Aug 5 11:23:19 linux-g987 hald: mounted /dev/sdb1 on behalf of uid 1000
Unter Win-XP funzen alle Ports dagegen einwandfrei.
PS: Bitte oben stehende Verlinkung ins andere Forum beachten (Crossposting)