Also ich wohne ja hier im Studentenwohnheim und jedes Zimmer hat hier nen Internetanschluss. Die Anmeldung mit meinen logindaten und Passwort klappt auch soweit jedoch schlägt das laden von Webseiten etc. fehl.
Ich habe mal das skript durchlaufen lassen:
Ich dachte zuerst es liegt vielleicht wieder an der resolv.conf konnte da aber keinen Fehler finden. Ich habe dann mein Notebook angeschlossen und damit klappt es einwandfrei wie man sieht.
Ich habe mal das skript durchlaufen lassen:
Code:
collectNWData V0.6.5.5-5f (Rev: 1.344C, Build: 2012-09-14 20:01:20 UTC)
--- Which type of your network connection should be tested?
--- (2) Wired connection
--- What's the type of networktopology?
--- (2) DSL HW router <---> LinuxClient
--- On which host is the script executed?
--- (1) LinuxClient
--- NWEliza is analyzing the system for common network configuration errors ...
!!! CND0540W: Messages dropped on network interface eth0
!!! CND0180I: The system can't ping external IP address 195.135.220.3
!!! CND0150E: There might be a problem with the default gateway definition 192.168.100.1 on interface eth0
!!! CND0310W: Classic network configuration with ifup was detected. Configuration with networkmanager is much easier
--- Go to http://www.linux-tips-and-tricks.de/CND to get more detailed instructions
--- about the error/warning messages and how to fix the problems on your own.
--- If you are unsuccessful then place the contents of file in the net
--- (see http://www.linux-tips-and-tricks.de/CND_UPL for links)
--- and then paste the nopaste link on your favorite Linux forum.
==================================================================================================================
===== cat /etc/*[-_]release || cat /etc/*[-_]version =============================================================
/etc/os-release
/etc/SuSE-release
NAME=openSUSE
VERSION = 12.1 (Asparagus)
VERSION_ID="12.1"
PRETTY_NAME="openSUSE 12.1 (Asparagus) (x86_64)"
ID=opensuse
openSUSE 12.1 (x86_64)
VERSION = 12.1
CODENAME = Asparagus
===== uname -a ===================================================================================================
Linux linux-5jh1 3.1.0-1.2-desktop #1 SMP PREEMPT Thu Nov 3 14:45:45 UTC 2011 (187dde0) x86_64 x86_64 x86_64 GNU/Linux
===== cat /etc/sysconfig/network/ifcfg-[earwd]* | grep -v "=''" ==================================================
--- /etc/sysconfig/network/ifcfg-eth0
BOOTPROTO='dhcp'
NAME='RTL8111/8168B PCI Express Gigabit Ethernet controller'
STARTMODE='auto'
USERCONTROL='no'
===== dhcpcd-test ================================================================================================
eth0: DHCP server available
===== ping tests =================================================================================================
Ping of 195.135.220.3 failed
Ping of www.suse.de failed
===== cat /etc/resolv | grep -i "nameserver" =====================================================================
nameserver 192.168.100.1
===== cat /etc/hosts =============================================================================================
127.0.0.1 localhost
===== route -n | egrep "(eth|ath|ra|wlan|dsl)" ===================================================================
0.0.0.0 192.168.100.1 0.0.0.0 UG 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
192.168.100.0 0.0.0.0 255.255.254.0 U 0 0 0 eth0
===== ifconfig (filtered for eth|wlan|ra|ath|dsl) ================================================================
eth0 Link encap:Ethernet Hardware Adresse ##:##:##:##:##:#1
inet Adresse:192.168.100.151 Bcast:192.168.101.255 Maske:255.255.254.0
inet6 Adresse: fe80::225:22ff:fe06:af70/64 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:25341 errors:0 dropped:62 overruns:0 frame:0
TX packets:1088 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:3227347 (3.0 Mb) TX bytes:105455 (102.9 Kb)
Interrupt:41 Basisadresse:0x2000
===== lspci ======================================================================================================
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: ASRock Incorporation Motherboard (one of many) [1849:8168]
Kernel driver in use: r8169
===== lsusb | grep -v "root hub" =================================================================================
Bus 004 Device 002: ID 046a:0106 Cherry GmbH R-300 Wireless Mouse Receiver
Bus 003 Device 002: ID 046d:c049 Logitech, Inc. G5 Laser Mouse
===== hwinfo (filtered) ==========================================================================================
30: PCI 200.0: 0200 Ethernet controller
Model: "Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8168 "RTL8111/8168B PCI Express Gigabit Ethernet controller"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x8168 "Motherboard (one of many)"
Driver: "r8169"
Driver Modules: "r8169"
Device File: eth0
Link detected: yes
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
===== lsmod (filtered) ===========================================================================================
| af_packet | cbc | cdc_acm | edac_core | edac_mce_amd |
| fglrx | i2c_piix4 | ip_tables | k10temp | microcode |
| mperf | pci_hotplug | powernow_k8 | r8169 | rfkill |
| serio_raw | sg | sha256_generic | shpchp | sp5100_tco |
| sr_mod | tun | wmi |
===== egrep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net* ==============
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
==================================================================================================================
*** NWElizaStates V0.6.5.5-5f
IF:eth0 IM:2 DI:1 FALON:1 NIC:0 cNiC:1:0 NI:0 cNI:0 PNG:1 DR:1 NISS:0 IP6:0 KM:0 WLW:0 RTDT:SuSE GUI:0 UID:0
Ich dachte zuerst es liegt vielleicht wieder an der resolv.conf konnte da aber keinen Fehler finden. Ich habe dann mein Notebook angeschlossen und damit klappt es einwandfrei wie man sieht.