ath9k macht kein n-Modus

mairo · 30 März 2012

Hallöchen,

in meinem Laptop ist eine Atheros WLAN-Karte verbaut. Diese macht (zumindest unter Windows) den n-Standard mit 150 mbit.
Unter Opensuse 11.2 (KDE 4.8) wird mir aber im Netzerkmanager die Wlan-Karte angezeit, eine Vergindug kommt auch zu stande, aber als Band nur "b/g". Kein "n"!! Als Modul wird ath9k verwendet.

Wie kann ich das lösen?

Grüße
mairo

spoensche · 30 März 2012

mairo schrieb:
Hallöchen,

in meinem Laptop ist eine Atheros WLAN-Karte verbaut. Diese macht (zumindest unter Windows) den n-Standard mit 150 mbit.
Unter Opensuse 11.2 (KDE 4.8) wird mir aber im Netzerkmanager die Wlan-Karte angezeit, eine Vergindug kommt auch zu stande, aber als Band nur "b/g". Kein "n"!! Als Modul wird ath9k verwendet.

WLAN n hat 300 MBit/s. Deine Atheros Karte ist eine b/g Karte und die 150 Mbit/s kommen nur zu Stande, weil in deinem Router auch ein Atheros Chip verwendet wird. Bei Broadcom Chips verhält es sich ähnlich.

Poste mal bitte die Ausgabe von

Code:

lspci -vv | grep -A 70 -i atheros

mairo · 31 März 2012

nein, es ist definitiv ein n-chipsatz.. sowohl laut Atheros als auch laut Samsung!!!
Denn warum sollte es sonst unter Windows funktionieren? Dort wird ja auch im n-Modus vebunden...
Ist übrigens eine Atheros AR9285

The AR9285 single-chip PCI Express® solution features Atheros Align technology, which leverages the 802.11n 1-stream specification

Quelle: http://www.atheros.com

übrigens:

Code:

02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
        Subsystem: Foxconn International, Inc. Device e025
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f3800000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: 00000000  Data: 0000
        Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Capabilities: [140 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Capabilities: [160 v1] Device Serial Number 00-15-17-ff-ff-24-14-12
        Capabilities: [170 v1] Power Budgeting <?>
        Kernel driver in use: ath9k

06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller
        Subsystem: Samsung Electronics Co Ltd Device c07f
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 44
        Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=16K]
        Region 2: I/O ports at b000 [size=256]
        Capabilities: [48] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee0f00c  Data: 4189
        Capabilities: [c0] Express (v2) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 unlimited

spoensche · 31 März 2012

Kann dein Router den Wireless N? Was hast du für einen Router? Hast du in der Router Konfiguration mal überprüft, ob man Wireless N erst noch aktivieren muss?
Was sagt den die Ausgabe von

Code:

iwlist wlan0 rate

Ich suche mal ob ich wegen dem Problem etwas finde.

mairo · 1 Apr. 2012

ich habe einen speedport 723v. der kann auch den n-modus. dieser ist auch aktiviert. dies habe ich überprüft. ausserdem funktioniert es under windows ja auch problemlos.

danke für die suche

mairo

spoensche · 1 Apr. 2012

Poste mal bitte die Ausgabe des Befehls, den ich dir and die Hand gegeben habe.

mairo · 1 Apr. 2012

entschuldige, habe ich wohl übersehen. dies hole ich aber gerne nach:

Code:

maik-laptop:/home/maik # iwlist wlan0 rate
wlan0     unknown bit-rate information.
          Current Bit Rate:54 Mb/s

spoensche · 3 Apr. 2012

http://de.opensuse.org/Lifetime

Installiere mal eine aktuelle Distri. Für 11.2 gibt es keinerlei Support mehr, also auch keine Updates.Möglicherweise hatte der Atheros Treiber dort noch keine Wireless-N Unterstützung.

mairo · 4 Apr. 2012

ups... verzeihnung... habe natürlich 12.1 installiert.. bin immer up-do-date

alle sicherheitspatches sind auch installiert...

spoensche · 4 Apr. 2012

Poste mal die Ausgaben von

Code:

dmesg | grep ath9
dmesg | egrep -i "acpi|err|apic"
uname -a

mairo · 6 Apr. 2012

Code:

maik-laptop:/home/maik # dmesg | grep ath9
[   13.435826] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.436194] ath9k 0000:02:00.0: setting latency timer to 64
[   13.497728] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   13.497950] Registered led device: ath9k-phy0

Code:

maik-laptop:/home/maik # dmesg | grep ath9
[   13.435826] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.436194] ath9k 0000:02:00.0: setting latency timer to 64
[   13.497728] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   13.497950] Registered led device: ath9k-phy0
maik-laptop:/home/maik # dmesg | egrep -i "acpi|err|apic"
[    0.000000]  BIOS-e820: 00000000dea8d000 - 00000000dead5000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000dead6000 - 00000000dead9000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000deaf4000 - 00000000deafe000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000deb18000 - 00000000deb19000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000deb22000 - 00000000deb23000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000deb27000 - 00000000deb2a000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000deb2e000 - 00000000deb3d000 (ACPI NVS)
[    0.000000] ACPI: RSDP 00000000000f0400 00024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000deb28e18 0005C (v01 SECCSD LH43STAR 06222004 MSFT 00010013)
[    0.000000] ACPI: FACP 00000000deb18c18 000F4 (v04 SECCSD LH43STAR 06222004 MSFT 00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDEB39F40/0x00000000DEB3CD40, using 32 (20110623/tbfadt-489)
[    0.000000] ACPI: DSDT 00000000deaf4018 0948A (v01 SECCSD LH43STAR 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000deb39f40 00040
[    0.000000] ACPI: APIC 00000000deb27f18 00092 (v02 SECCSD LH43STAR 06222004 MSFT 00010013)
[    0.000000] ACPI: MCFG 00000000deb3bd18 0003C (v01 SECCSD LH43STAR 06222004 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000deb3bc98 00038 (v01 SECCSD LH43STAR 06222004 AMI. 00000003)
[    0.000000] ACPI: SSDT 00000000deb22018 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SLIC 00000000deb34a18 00176 (v01 SECCSD LH43STAR 06222004 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000dead4018 00B12 (v01 PegRef  SecPEGP 00001000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.003425] ACPI: Core revision 20110623
[    0.012210] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.471418] PM: Registering ACPI NVS region at dea8d000 (294912 bytes)
[    0.471429] PM: Registering ACPI NVS region at dead6000 (12288 bytes)
[    0.471430] PM: Registering ACPI NVS region at deaf4000 (40960 bytes)
[    0.471433] PM: Registering ACPI NVS region at deb18000 (4096 bytes)
[    0.471434] PM: Registering ACPI NVS region at deb22000 (4096 bytes)
[    0.471435] PM: Registering ACPI NVS region at deb2e000 (61440 bytes)
[    0.471784] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.471786] ACPI: bus type pci registered
[    0.479020] ACPI: Added _OSI(Module Device)
[    0.479021] ACPI: Added _OSI(Processor Device)
[    0.479023] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.479024] ACPI: Added _OSI(Processor Aggregator Device)
[    0.480590] ACPI: EC: Look up EC in DSDT
[    0.482081] ACPI: Executed 2 blocks of module-level executable AML code
[    0.488902] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.494433] ACPI: SSDT 00000000deb26598 00535 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.494818] ACPI: Dynamic OEM Table Load:
[    0.494820] ACPI: SSDT           (null) 00535 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.494981] ACPI: SSDT 00000000deb24018 007E0 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.495342] ACPI: Dynamic OEM Table Load:
[    0.495344] ACPI: SSDT           (null) 007E0 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.501139] ACPI: SSDT 00000000deb25a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.501583] ACPI: Dynamic OEM Table Load:
[    0.501585] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.504420] ACPI: SSDT 00000000deb23d98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.504810] ACPI: Dynamic OEM Table Load:
[    0.504812] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.509792] ACPI: Interpreter enabled
[    0.509795] ACPI: (supports S0 S3 S4 S5)
[    0.509817] ACPI: Using IOAPIC for interrupt routing
[    0.527474] ACPI: Power Resource [FN00] (off)
[    0.527563] ACPI: Power Resource [FN01] (off)
[    0.527869] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.528094] ACPI: No dock devices found.
[    0.528098] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.528483] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.532325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.532526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.532588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.532647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.532702] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.532788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.532894]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.532934]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    0.532935] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.539100] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
[    0.539265]  pci0000:3f: Requesting ACPI _OSC control (0x1d)
[    0.539267]  pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.539268] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.539472] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.539519] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.539567] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[    0.539613] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.539661] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.539708] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.539754] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.539807] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.540206] PCI: Using ACPI for IRQ routing
[    0.546669] pnp: PnP ACPI init
[    0.546695] ACPI: bus type pnp registered
[    0.547138] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.547175] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.547200] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.547310] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.547341] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.547425] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.547477] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.547510] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.547539] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.548029] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.548580] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.548593] pnp: PnP ACPI: found 11 devices
[    0.548594] ACPI: ACPI bus type pnp unregistered
[    1.130559] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.916696] ACPI: Thermal Zone [TZ00] (61 C)
[    1.931588] ACPI: Thermal Zone [TZ01] (61 C)
[    1.934624] ACPI: acpi_idle yielding to intel_idle
[    1.937911] ACPI: Fan [FAN0] (off)
[    1.937973] ACPI: Fan [FAN1] (off)
[   13.391207] ACPI: Lid Switch [LID0]
[   13.391321] ACPI: Power Button [PWRB]
[   13.391416] ACPI: Sleep Button [SLPB]
[   13.391497] ACPI: Power Button [PWRF]
[   13.420572] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   13.420581] ACPI: Battery Slot [BAT1] (battery present)
[   13.420689] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   13.420790] ACPI: AC Adapter [ADP1] (on-line)
[   13.431955] acpi device:09: registered as cooling_device6
[   13.434174] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[   13.449823] ALSA patch_realtek.c:1237 SKU: override=0x1

Code:

maik-laptop:/home/maik # uname -a
Linux maik-laptop.maik.netz 3.1.9-1.4-desktop #1 SMP PREEMPT Fri Jan 27 08:55:10 UTC 2012 (efb5ff4) x86_64 x86_64 x86_64 GNU/Linux

ich hoffe, das hilft weiter.....

spoensche · 6 Apr. 2012

Ein Bug im Atheros Treiber sorgt dafür, dass du kein WLAN-N verwenden kannst.

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/754176
http://www.google.de/search?channel=cs&ie=UTF-8&q=ath9k+wlan+n#q=ath9k+wlan+n&hl=de&hs=XDr&channel=cs&prmd=imvns&ei=agZ_T4TCOqj24QTqmcTEBw&start=10&sa=N&bav=on.2,or.r_gc.r_pw.r_qf.,cf.osb&fp=ab23ad4f9604b43b&biw=1366&bih=600

mairo · 7 Apr. 2012

oki.. danke.. also hoffen, dass der bug behoben wird?
..oder nen anderen wlan-stick anschließen ... oder das gute alte kabel

spoensche · 7 Apr. 2012

Verwende ein Kabel statt einen WLAN b/g Stick. Dann bist du ein wenig schneller unterwegs.