Hi,
ich habe mir das HowTo durchgelesen. Der Scanner (CanoScan FB630U) wird von sane definitiv unterstützt.
Bei mir ist es auch so, dass "sane-find-scanner" folgendes sagt:
In /etc/sane.d/dll.conf ist auch nur "canon" und "canon630u" ohne # versehen, müsste also auch passen. Das Backend wird lt. "export SANE_DEBUG_DLL=255 ; scanimage -L" auch richtig geladen, aber ein "scanimage -L" bringt mir:
(xsane startet anfangs, wenn ich dann einen Vorschauscan versuche, bringt er die Meldung, dass das Gerät besetzt wäre!? Starte ich xsane danach erneut, dann erhalte ich "Keine Geräte erreichbar")
ich habe mir das HowTo durchgelesen. Der Scanner (CanoScan FB630U) wird von sane definitiv unterstützt.
Bei mir ist es auch so, dass "sane-find-scanner" folgendes sagt:
heart@linux:~> sane-find-scanner
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04a9, product=0x2204) at libusb:001:003
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
In /etc/sane.d/dll.conf ist auch nur "canon" und "canon630u" ohne # versehen, müsste also auch passen. Das Backend wird lt. "export SANE_DEBUG_DLL=255 ; scanimage -L" auch richtig geladen, aber ein "scanimage -L" bringt mir:
Wie bekomm ich den Scanner zum Laufen :?No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
(xsane startet anfangs, wenn ich dann einen Vorschauscan versuche, bringt er die Meldung, dass das Gerät besetzt wäre!? Starte ich xsane danach erneut, dann erhalte ich "Keine Geräte erreichbar")