Hallo,
ich banutze Suse 10.1 und habe einen Canon IP 90 (USB Anschluss).
Den Drucker habe ich über Yast eingerichtet. Yast hat ihn erkannt und automatisch den Treiber "Canon Lips-II+" installiert.
Wenn ich "kprinter" starte, dann ist der Druckerstatus "Idle (Accepting jobs)". Wenn ich die Cups Oberfläche über "http://localhost:631" aufrufe, dann steht der Druckerstatus auf "gelangweilt, nimmt Aufträge entgegen".
So weit so gut!
Wenn ich aber einen Ausdruck starte, zum Beispiel die Cups Testseite, dann kommt die Meldung in Cups: "eine Testseite wurde gesendet". Unter Druckaufträge -> Fertige Druckaufträge wird dann der Job auch angezeigt.
Das Problem ist: der Drucker druckt nicht! Er macht gar nix. Da blinkt auch nix.
Inhalt von /var/log/cups/error_log:
I [26/Oct/2006:18:02:19 +0200] Listening to 0:631
I [26/Oct/2006:18:02:19 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [26/Oct/2006:18:02:19 +0200] Configured for up to 100 clients.
I [26/Oct/2006:18:02:19 +0200] Allowing up to 100 client connections per host.
I [26/Oct/2006:18:02:19 +0200] Full reload is required.
I [26/Oct/2006:18:02:28 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 4274 PPDs...
I [26/Oct/2006:18:02:33 +0200] LoadPPDs: No new or changed PPDs...
I [26/Oct/2006:18:02:33 +0200] Full reload complete.
I [26/Oct/2006:18:10:12 +0200] Scheduler shutting down normally.
I [26/Oct/2006:18:10:13 +0200] Listening to 0:631
I [26/Oct/2006:18:10:13 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [26/Oct/2006:18:10:13 +0200] Configured for up to 100 clients.
I [26/Oct/2006:18:10:13 +0200] Allowing up to 100 client connections per host.
I [26/Oct/2006:18:10:13 +0200] Full reload is required.
I [26/Oct/2006:18:10:13 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 4274 PPDs...
I [26/Oct/2006:18:10:13 +0200] LoadPPDs: No new or changed PPDs...
I [26/Oct/2006:18:10:13 +0200] Full reload complete.
I [26/Oct/2006:18:10:13 +0200] Setting y2test device-uri to "usb://Canon/iP90" (was "file:/dev/null".)
I [26/Oct/2006:18:10:13 +0200] Setting y2test printer-is-accepting-jobs to 1 (was 0.)
I [26/Oct/2006:18:10:13 +0200] Setting y2test printer-state to 3 (was 5.)
I [26/Oct/2006:18:10:13 +0200] Saving printers.conf...
I [26/Oct/2006:18:10:13 +0200] New printer 'y2test' added by 'root'.
I [26/Oct/2006:18:10:14 +0200] Adding start banner page "none" to job 1.
I [26/Oct/2006:18:10:14 +0200] Adding end banner page "none" to job 1.
I [26/Oct/2006:18:10:14 +0200] Job 1 queued on 'y2test' by 'root'.
I [26/Oct/2006:18:10:14 +0200] Started filter /usr/lib/cups/filter/texttops (PID 5447) for job 1.
I [26/Oct/2006:18:10:14 +0200] Started filter /usr/lib/cups/filter/pstops (PID 5448) for job 1.
I [26/Oct/2006:18:10:14 +0200] Started filter /usr/lib/cups/filter/foomatic-rip (PID 5449) for job 1.
I [26/Oct/2006:18:10:14 +0200] Started backend /usr/lib/cups/backend/usb (PID 5450) for job 1.
I [26/Oct/2006:18:10:28 +0200] Printer 'y2test' deleted by 'root'.
I [26/Oct/2006:18:10:28 +0200] Saving printers.conf...
I [26/Oct/2006:18:10:33 +0200] Setting ip90 device-uri to "usb://Canon/iP90" (was "file:/dev/null".)
I [26/Oct/2006:18:10:33 +0200] Setting ip90 printer-is-accepting-jobs to 1 (was 0.)
I [26/Oct/2006:18:10:33 +0200] Setting ip90 printer-state to 3 (was 5.)
I [26/Oct/2006:18:10:33 +0200] Saving printers.conf...
I [26/Oct/2006:18:10:33 +0200] New printer 'ip90' added by 'root'.
I [26/Oct/2006:18:10:33 +0200] Saving printers.conf...
I [26/Oct/2006:18:10:33 +0200] Saving classes.conf...
I [26/Oct/2006:18:10:33 +0200] Default destination set to 'ip90' by 'root'.
I [26/Oct/2006:18:21:13 +0200] Scheduler shutting down normally.
I [26/Oct/2006:18:21:26 +0200] Listening to 0:631
I [26/Oct/2006:18:21:26 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [26/Oct/2006:18:21:26 +0200] Configured for up to 100 clients.
I [26/Oct/2006:18:21:26 +0200] Allowing up to 100 client connections per host.
I [26/Oct/2006:18:21:26 +0200] Full reload is required.
I [26/Oct/2006:18:21:26 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 4274 PPDs...
I [26/Oct/2006:18:21:27 +0200] LoadPPDs: No new or changed PPDs...
I [26/Oct/2006:18:21:27 +0200] Full reload complete.
I [26/Oct/2006:18:26:30 +0200] Adding start banner page "none" to job 1.
I [26/Oct/2006:18:26:30 +0200] Adding end banner page "none" to job 1.
I [26/Oct/2006:18:26:30 +0200] Job 1 queued on 'ip90' by 'hapke'.
I [26/Oct/2006:18:26:30 +0200] Started filter /usr/lib/cups/filter/pstops (PID 5689) for job 1.
I [26/Oct/2006:18:26:30 +0200] Started filter /usr/lib/cups/filter/foomatic-rip (PID 5690) for job 1.
I [26/Oct/2006:18:26:30 +0200] Started backend /usr/lib/cups/backend/usb (PID 5691) for job 1.
I [26/Oct/2006:18:27:22 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=5711)
I [26/Oct/2006:18:27:51 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=5713)
I [26/Oct/2006:18:27:54 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=5714)
I [26/Oct/2006:18:32:51 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=5799)
I [26/Oct/2006:18:32:52 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=5801)
I [26/Oct/2006:18:34:14 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=5803)
I [26/Oct/2006:18:34:14 +0200] Adding start banner page "none" to job 2.
I [26/Oct/2006:18:34:14 +0200] Adding end banner page "none" to job 2.
I [26/Oct/2006:18:34:14 +0200] Job 2 queued on 'ip90' by ''.
I [26/Oct/2006:18:34:14 +0200] Started filter /usr/lib/cups/filter/pstops (PID 5805) for job 2.
I [26/Oct/2006:18:34:14 +0200] Started filter /usr/lib/cups/filter/foomatic-rip (PID 5806) for job 2.
I [26/Oct/2006:18:34:14 +0200] Started backend /usr/lib/cups/backend/usb (PID 5807) for job 2.
I [26/Oct/2006:18:35:07 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=5814)
I [26/Oct/2006:18:35:09 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=5815)
Hier noch der Inhalt von /etc/cups/printer.conf:
# Printer configuration file for CUPS v1.1.23
# Written by cupsd on Thu Oct 26 18:10:33 2006
<DefaultPrinter ip90>
Info Canon iP90
Location USB-Drucker auf //Canon/iP90
DeviceURI usb://Canon/iP90
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
</Printer>
ich banutze Suse 10.1 und habe einen Canon IP 90 (USB Anschluss).
Den Drucker habe ich über Yast eingerichtet. Yast hat ihn erkannt und automatisch den Treiber "Canon Lips-II+" installiert.
Wenn ich "kprinter" starte, dann ist der Druckerstatus "Idle (Accepting jobs)". Wenn ich die Cups Oberfläche über "http://localhost:631" aufrufe, dann steht der Druckerstatus auf "gelangweilt, nimmt Aufträge entgegen".
So weit so gut!
Wenn ich aber einen Ausdruck starte, zum Beispiel die Cups Testseite, dann kommt die Meldung in Cups: "eine Testseite wurde gesendet". Unter Druckaufträge -> Fertige Druckaufträge wird dann der Job auch angezeigt.
Das Problem ist: der Drucker druckt nicht! Er macht gar nix. Da blinkt auch nix.
Inhalt von /var/log/cups/error_log:
I [26/Oct/2006:18:02:19 +0200] Listening to 0:631
I [26/Oct/2006:18:02:19 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [26/Oct/2006:18:02:19 +0200] Configured for up to 100 clients.
I [26/Oct/2006:18:02:19 +0200] Allowing up to 100 client connections per host.
I [26/Oct/2006:18:02:19 +0200] Full reload is required.
I [26/Oct/2006:18:02:28 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 4274 PPDs...
I [26/Oct/2006:18:02:33 +0200] LoadPPDs: No new or changed PPDs...
I [26/Oct/2006:18:02:33 +0200] Full reload complete.
I [26/Oct/2006:18:10:12 +0200] Scheduler shutting down normally.
I [26/Oct/2006:18:10:13 +0200] Listening to 0:631
I [26/Oct/2006:18:10:13 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [26/Oct/2006:18:10:13 +0200] Configured for up to 100 clients.
I [26/Oct/2006:18:10:13 +0200] Allowing up to 100 client connections per host.
I [26/Oct/2006:18:10:13 +0200] Full reload is required.
I [26/Oct/2006:18:10:13 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 4274 PPDs...
I [26/Oct/2006:18:10:13 +0200] LoadPPDs: No new or changed PPDs...
I [26/Oct/2006:18:10:13 +0200] Full reload complete.
I [26/Oct/2006:18:10:13 +0200] Setting y2test device-uri to "usb://Canon/iP90" (was "file:/dev/null".)
I [26/Oct/2006:18:10:13 +0200] Setting y2test printer-is-accepting-jobs to 1 (was 0.)
I [26/Oct/2006:18:10:13 +0200] Setting y2test printer-state to 3 (was 5.)
I [26/Oct/2006:18:10:13 +0200] Saving printers.conf...
I [26/Oct/2006:18:10:13 +0200] New printer 'y2test' added by 'root'.
I [26/Oct/2006:18:10:14 +0200] Adding start banner page "none" to job 1.
I [26/Oct/2006:18:10:14 +0200] Adding end banner page "none" to job 1.
I [26/Oct/2006:18:10:14 +0200] Job 1 queued on 'y2test' by 'root'.
I [26/Oct/2006:18:10:14 +0200] Started filter /usr/lib/cups/filter/texttops (PID 5447) for job 1.
I [26/Oct/2006:18:10:14 +0200] Started filter /usr/lib/cups/filter/pstops (PID 5448) for job 1.
I [26/Oct/2006:18:10:14 +0200] Started filter /usr/lib/cups/filter/foomatic-rip (PID 5449) for job 1.
I [26/Oct/2006:18:10:14 +0200] Started backend /usr/lib/cups/backend/usb (PID 5450) for job 1.
I [26/Oct/2006:18:10:28 +0200] Printer 'y2test' deleted by 'root'.
I [26/Oct/2006:18:10:28 +0200] Saving printers.conf...
I [26/Oct/2006:18:10:33 +0200] Setting ip90 device-uri to "usb://Canon/iP90" (was "file:/dev/null".)
I [26/Oct/2006:18:10:33 +0200] Setting ip90 printer-is-accepting-jobs to 1 (was 0.)
I [26/Oct/2006:18:10:33 +0200] Setting ip90 printer-state to 3 (was 5.)
I [26/Oct/2006:18:10:33 +0200] Saving printers.conf...
I [26/Oct/2006:18:10:33 +0200] New printer 'ip90' added by 'root'.
I [26/Oct/2006:18:10:33 +0200] Saving printers.conf...
I [26/Oct/2006:18:10:33 +0200] Saving classes.conf...
I [26/Oct/2006:18:10:33 +0200] Default destination set to 'ip90' by 'root'.
I [26/Oct/2006:18:21:13 +0200] Scheduler shutting down normally.
I [26/Oct/2006:18:21:26 +0200] Listening to 0:631
I [26/Oct/2006:18:21:26 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [26/Oct/2006:18:21:26 +0200] Configured for up to 100 clients.
I [26/Oct/2006:18:21:26 +0200] Allowing up to 100 client connections per host.
I [26/Oct/2006:18:21:26 +0200] Full reload is required.
I [26/Oct/2006:18:21:26 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 4274 PPDs...
I [26/Oct/2006:18:21:27 +0200] LoadPPDs: No new or changed PPDs...
I [26/Oct/2006:18:21:27 +0200] Full reload complete.
I [26/Oct/2006:18:26:30 +0200] Adding start banner page "none" to job 1.
I [26/Oct/2006:18:26:30 +0200] Adding end banner page "none" to job 1.
I [26/Oct/2006:18:26:30 +0200] Job 1 queued on 'ip90' by 'hapke'.
I [26/Oct/2006:18:26:30 +0200] Started filter /usr/lib/cups/filter/pstops (PID 5689) for job 1.
I [26/Oct/2006:18:26:30 +0200] Started filter /usr/lib/cups/filter/foomatic-rip (PID 5690) for job 1.
I [26/Oct/2006:18:26:30 +0200] Started backend /usr/lib/cups/backend/usb (PID 5691) for job 1.
I [26/Oct/2006:18:27:22 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=5711)
I [26/Oct/2006:18:27:51 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=5713)
I [26/Oct/2006:18:27:54 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=5714)
I [26/Oct/2006:18:32:51 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=5799)
I [26/Oct/2006:18:32:52 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=5801)
I [26/Oct/2006:18:34:14 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=5803)
I [26/Oct/2006:18:34:14 +0200] Adding start banner page "none" to job 2.
I [26/Oct/2006:18:34:14 +0200] Adding end banner page "none" to job 2.
I [26/Oct/2006:18:34:14 +0200] Job 2 queued on 'ip90' by ''.
I [26/Oct/2006:18:34:14 +0200] Started filter /usr/lib/cups/filter/pstops (PID 5805) for job 2.
I [26/Oct/2006:18:34:14 +0200] Started filter /usr/lib/cups/filter/foomatic-rip (PID 5806) for job 2.
I [26/Oct/2006:18:34:14 +0200] Started backend /usr/lib/cups/backend/usb (PID 5807) for job 2.
I [26/Oct/2006:18:35:07 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=5814)
I [26/Oct/2006:18:35:09 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=5815)
Hier noch der Inhalt von /etc/cups/printer.conf:
# Printer configuration file for CUPS v1.1.23
# Written by cupsd on Thu Oct 26 18:10:33 2006
<DefaultPrinter ip90>
Info Canon iP90
Location USB-Drucker auf //Canon/iP90
DeviceURI usb://Canon/iP90
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
</Printer>