Hallo zusammen,
ich wollte kurz beschreiben wie ich den USB-DVB-T Adapter zum laufen gebracht habe.
Wichtig: mit dem Kernel 2.6.13.xx+ SuSE 10.0 hat es nicht funktioniert!!
Jetzt habe ich Kernel 2.6.16.21-0.25 + SuSE 10.1 laufen und damit ging es reibungslos!
Nach langem fummeln und generve lauft der Adapter jetzt 1a!
Als erstes sei auf diese Seite verwiesen: http://linuxtv.org/v4lwiki/index.php/Em2880
1. cd /lib/firmware
su passwd
wget http://mcentral.de/firmware/firmware.tgz
tar xvzf firmware.tgz
exit
2.
hg clone http://linuxtv.org/hg/~mrechberger/v4l-dvb-merge
(mercurial von http://www.selenic.com/mercurial/ runterladen)
cd v4l-dvb-merge
cd v4l
make
su passwd
make install
JETZT UNBEDINGT ein Reboot Adapter noch nicht einstecken!!!!!!
3. modprobe em28xx device_mode=1
modprobe em2880-dvb
Adapter jetzt einstecken und dmesg anschauen, es sollte so aussehen:
usb 1-3.2: new high speed USB device using ehci_hcd and address 6
usb 1-3.2: new device found, idVendor=0ccd, idProduct=0042
usb 1-3.2: new device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-3.2: Product: Cinergy Hybrid T USB XS
usb 1-3.2: Manufacturer: TerraTec Electronic GmbH
usb 1-3.2: configuration #1 chosen from 1 choice
em28xx new video device (0ccd:0042): interface 0, class 255
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
tvp5150: module not supported by Novell, setting U taint flag.
input: em2880/em2870 remote control as /class/input/input4
em28xx-input.c: remote control handler attached
attach_inform: eeprom detected.
tuner 0-0061: chip found @ 0xc2 (em28xx #0)
attach inform: detected I2C address c2
Loading base firmware: xc3028_init0.i2c.fw
Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
attach_inform: tvp5150 detected.
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd:0042
AC97 audio (5 sample rates)
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
tvp5150 0-005c: tvp5150am1 detected.
em28xx-video.c: requesting em2880-dvb!
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em2880-dvb.c: DVB Init
em2880-dvb.c: VIDIOC_S_MODE
Loading base firmware: xc3028_8MHz_init0.i2c.fw
Loading specific dtv settings: xc3028_DTV8_2633.i2c.fw
xc3028-tuner.c: sending extra call for DVB-T
em2880-dvb.c: failed initializing zl10353 DVB-T demodulator
em2880-dvb.c: retrying with mt352 DVB-T demodulator
em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb
em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe em28xx device_mode=1"
em28xx #0: Found Terratec Hybrid XS
em28xx audio device (0ccd:0042): interface 1, class 1
em28xx audio device (0ccd:0042): interface 2, class 1
usbcore: registered new driver snd-usb-audio
usb 1-3.2: USB disconnect, address 6
em28xx-input.c: remote control handler detached
em28xx #0: disconnecting em28xx#0 video
em28xx #0: V4L2 VIDEO devices /dev/video0 deregistered
em28xx #0: V4L2 VBI devices /dev/vbi0 deregistered
usbcore: deregistering driver em28xx
em28xx: module not supported by Novell, setting U taint flag.
em28xx v4l2 driver version 0.0.1 loaded
usbcore: registered new driver em28xx
em2880_dvb: module not supported by Novell, setting U taint flag.
usb 1-3.2: new high speed USB device using ehci_hcd and address 7
usb 1-3.2: new device found, idVendor=0ccd, idProduct=0042
usb 1-3.2: new device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-3.2: Product: Cinergy Hybrid T USB XS
usb 1-3.2: Manufacturer: TerraTec Electronic GmbH
usb 1-3.2: configuration #1 chosen from 1 choice
em28xx new video device (0ccd:0042): interface 0, class 255
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
input: em2880/em2870 remote control as /class/input/input5
em28xx-input.c: remote control handler attached
attach_inform: eeprom detected.
tuner 0-0061: chip found @ 0xc2 (em28xx #0)
attach inform: detected I2C address c2
Loading base firmware: xc3028_8MHz_init0.i2c.fw
Loading specific dtv settings: xc3028_DTV8_2633.i2c.fw
xc3028-tuner.c: sending extra call for DVB-T
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd:0042
AC97 audio (5 sample rates)
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
Loading base firmware: xc3028_init0.i2c.fw
Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
em28xx-video.c: requesting em2880-dvb!
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em2880-dvb.c: DVB Init
em2880-dvb.c: VIDIOC_S_MODE
Loading base firmware: xc3028_8MHz_init0.i2c.fw
Loading specific dtv settings: xc3028_DTV8_2633.i2c.fw
xc3028-tuner.c: sending extra call for DVB-T
DVB: registering new adapter (em2880 DVB-T).
DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
em28xx #0: Found Terratec Hybrid XS
So, das wars eigentlich schon, Kaffein anschmeißen dann kommt ne Meldung das Kanäle jetzt gesucht werden können.
Viel Erfolg!
http://linuxtv.org/v4lwiki/index.php/Talk:Em2880#Em2880_Linux_User_Faq <---- unbedingt bei Fehlern hier reinschauen, ungemein hilfreich!
Gruß
ToX
ich wollte kurz beschreiben wie ich den USB-DVB-T Adapter zum laufen gebracht habe.
Wichtig: mit dem Kernel 2.6.13.xx+ SuSE 10.0 hat es nicht funktioniert!!
Jetzt habe ich Kernel 2.6.16.21-0.25 + SuSE 10.1 laufen und damit ging es reibungslos!
Nach langem fummeln und generve lauft der Adapter jetzt 1a!
Als erstes sei auf diese Seite verwiesen: http://linuxtv.org/v4lwiki/index.php/Em2880
1. cd /lib/firmware
su passwd
wget http://mcentral.de/firmware/firmware.tgz
tar xvzf firmware.tgz
exit
2.
hg clone http://linuxtv.org/hg/~mrechberger/v4l-dvb-merge
(mercurial von http://www.selenic.com/mercurial/ runterladen)
cd v4l-dvb-merge
cd v4l
make
su passwd
make install
JETZT UNBEDINGT ein Reboot Adapter noch nicht einstecken!!!!!!
3. modprobe em28xx device_mode=1
modprobe em2880-dvb
Adapter jetzt einstecken und dmesg anschauen, es sollte so aussehen:
usb 1-3.2: new high speed USB device using ehci_hcd and address 6
usb 1-3.2: new device found, idVendor=0ccd, idProduct=0042
usb 1-3.2: new device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-3.2: Product: Cinergy Hybrid T USB XS
usb 1-3.2: Manufacturer: TerraTec Electronic GmbH
usb 1-3.2: configuration #1 chosen from 1 choice
em28xx new video device (0ccd:0042): interface 0, class 255
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
tvp5150: module not supported by Novell, setting U taint flag.
input: em2880/em2870 remote control as /class/input/input4
em28xx-input.c: remote control handler attached
attach_inform: eeprom detected.
tuner 0-0061: chip found @ 0xc2 (em28xx #0)
attach inform: detected I2C address c2
Loading base firmware: xc3028_init0.i2c.fw
Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
attach_inform: tvp5150 detected.
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd:0042
AC97 audio (5 sample rates)
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
tvp5150 0-005c: tvp5150am1 detected.
em28xx-video.c: requesting em2880-dvb!
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em2880-dvb.c: DVB Init
em2880-dvb.c: VIDIOC_S_MODE
Loading base firmware: xc3028_8MHz_init0.i2c.fw
Loading specific dtv settings: xc3028_DTV8_2633.i2c.fw
xc3028-tuner.c: sending extra call for DVB-T
em2880-dvb.c: failed initializing zl10353 DVB-T demodulator
em2880-dvb.c: retrying with mt352 DVB-T demodulator
em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb
em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe em28xx device_mode=1"
em28xx #0: Found Terratec Hybrid XS
em28xx audio device (0ccd:0042): interface 1, class 1
em28xx audio device (0ccd:0042): interface 2, class 1
usbcore: registered new driver snd-usb-audio
usb 1-3.2: USB disconnect, address 6
em28xx-input.c: remote control handler detached
em28xx #0: disconnecting em28xx#0 video
em28xx #0: V4L2 VIDEO devices /dev/video0 deregistered
em28xx #0: V4L2 VBI devices /dev/vbi0 deregistered
usbcore: deregistering driver em28xx
em28xx: module not supported by Novell, setting U taint flag.
em28xx v4l2 driver version 0.0.1 loaded
usbcore: registered new driver em28xx
em2880_dvb: module not supported by Novell, setting U taint flag.
usb 1-3.2: new high speed USB device using ehci_hcd and address 7
usb 1-3.2: new device found, idVendor=0ccd, idProduct=0042
usb 1-3.2: new device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-3.2: Product: Cinergy Hybrid T USB XS
usb 1-3.2: Manufacturer: TerraTec Electronic GmbH
usb 1-3.2: configuration #1 chosen from 1 choice
em28xx new video device (0ccd:0042): interface 0, class 255
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
input: em2880/em2870 remote control as /class/input/input5
em28xx-input.c: remote control handler attached
attach_inform: eeprom detected.
tuner 0-0061: chip found @ 0xc2 (em28xx #0)
attach inform: detected I2C address c2
Loading base firmware: xc3028_8MHz_init0.i2c.fw
Loading specific dtv settings: xc3028_DTV8_2633.i2c.fw
xc3028-tuner.c: sending extra call for DVB-T
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd:0042
AC97 audio (5 sample rates)
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
Loading base firmware: xc3028_init0.i2c.fw
Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
em28xx-video.c: requesting em2880-dvb!
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em2880-dvb.c: DVB Init
em2880-dvb.c: VIDIOC_S_MODE
Loading base firmware: xc3028_8MHz_init0.i2c.fw
Loading specific dtv settings: xc3028_DTV8_2633.i2c.fw
xc3028-tuner.c: sending extra call for DVB-T
DVB: registering new adapter (em2880 DVB-T).
DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
em28xx #0: Found Terratec Hybrid XS
So, das wars eigentlich schon, Kaffein anschmeißen dann kommt ne Meldung das Kanäle jetzt gesucht werden können.
Viel Erfolg!
http://linuxtv.org/v4lwiki/index.php/Talk:Em2880#Em2880_Linux_User_Faq <---- unbedingt bei Fehlern hier reinschauen, ungemein hilfreich!
Gruß
ToX