Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux.
Registriere dich kostenlos , um alle Inhalte zu sehen und Fragen zu stellen.
JavaScript ist deaktiviert. Für eine bessere Darstellung aktiviere bitte JavaScript in deinem Browser, bevor du fortfährst.
Du verwendest einen veralteten Browser. Es ist möglich, dass diese oder andere Websites nicht korrekt angezeigt werden.
Du solltest ein Upgrade durchführen oder einen
alternativen Browser verwenden.
Compiz lassen sich nicht aktivieren
Hallo,
ich habe eine ATI Radeon Mobility x1400 und versuche die Arbeitsflächen-Effekte zu aktivieren, aber immer wenn ich bei "Enable" einen Hacken setze kommt folgende Fehlermeldung:
"Desktop effects are not supported on your current hardware / configuration. Would you like to activate them anyway?"
Repositories sind alles installiert.
Opensuse 11.1
Gnome
Ati treiber von der Ati Homepage
Folgendes habe ich nach Ati installation gemacht
aticonfig --initial --input=/etc/X11/xorg.conf
sax2 -r -m 0=fglrx
Danke in vorraus
Wolverin schrieb:
Ati treiber von der Ati Homepage
Welcher genau?
Danke für die antwort,
glx scheint nicht zu laufen !
auburger@linux-00y2:~> glxinfo
name of display: :0.0
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 143 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 12
Current serial number in output stream: 12
Hm ??????????????????????
Sax sagt eigentlich das er die Karte erkannt hat !
Ati Catalyst Controllcenter funkt auch !
Komisch !
Die Treiberversion ist eventuell falsch, zumindest scheint kein entsprechendes Modul aktiv zu sein. Deshalb nochmal die Frage:
whois schrieb:
Hmmm?
folgenden treiber habe ich versucht :
ati.driver-installer-9.2-x86.x86_64.run
Der Treiber soll angeblich für 32 und 64 bit sein !
uname -a
Linux linux-00y2 2.6.27.19-3.2-pae #1 SMP 2009-02-25 15:40:44 +0100 i686 i686 i386 GNU/Linux
auburger@linux-00y2:~> rpm -qa|grep fg
x11-video-fglrxG01-8.573-0.1
netcfg-11.1-1.14
ati-fglrxG01-kmp-pae-8.573_2.6.27.7_9.1-0.1
auburger@linux-00y2:~> cat /etc/X11/xorg.conf
# /.../
# SaX generated X11 config file
# Created on: 2009-03-18T13:14:35+0100.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
EndSection
Section "ServerFlags"
Option "AIGLX" "on"
Option "AllowMouseOpenFail" "on"
Option "IgnoreABI" "on"
Option "ZapWarning" "on"
EndSection
Section "Module"
Load "dbe"
Load "freetype"
Load "extmod"
Load "glx"
Load "dri"
EndSection
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "de"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "12"
Option "Device" "/dev/input/mice"
Option "Name" "Logitech USB Receiver"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Mouse[3]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "on"
Option "HorizScrollDelta" "0"
Option "InputFashion" "Mouse"
Option "Name" "Synaptics;Touchpad"
Option "Protocol" "explorerps/2"
Option "SHMConfig" "on"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Option "CalcAlgorithm" "XServerPool"
DisplaySize 519 324
HorizSync 31-83
Identifier "Monitor[0]"
ModelName "2408WFP(Digital)"
Option "DPMS"
Option "PreferredMode" "1920x1200"
VendorName "DELL"
VertRefresh 56-76
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1920x1200" 154.00 1920 1968 2000 2080 1200 1203 1209 1235
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "ATI Mobility Radeon X1400 (M54 7145)"
Driver "fglrx"
Identifier "Device[0]"
Option "XAANoOffscreenPixmaps" "0x85a03f0"
Option "Capabilities" "0x81ba618"
Option "OpenGLOverlay" "0x84b0a78"
Option "FSAAScale" "0x85a0890"
Option "FSAAEnable" "0x859fee8"
Option "VideoOverlay" "0x85a0410"
VendorName "ATI"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
InputDevice "Mouse[3]" "SendCoreEvents"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Section "Extensions"
Option "Composite" "on"
EndSection
Die xorg.conf scheint mir beim Überfliegen soweit in Ordnung zu sein, aber das mit der angeblichen 32bit-Kompatibilität würde ich nochmal genauer überprüfen.
Der treiber ist für i586 und für i586_x64
jetzt habe ich mal wie in eurem wiki versucht gleicher fehler !
Muß ich den ati vorher runterschmeißen ? und wenn ja wie ?
.Linux Club Aushilfsadministrator
Teammitglied
Wolverin schrieb:
auburger@linux-00y2:~> rpm -qa|grep fg
x11-video-fglrxG01-8.573-0.1
netcfg-11.1-1.14
ati-fglrxG01-kmp-pae-8.573_2.6.27.7_9.1-0.1
Hast du diesen aus dem ATI-Communiy-Repo, also über YaST installiert und versuchst jetzt den von der ATI/AMD Homepage drüber zu bügeln?
[Nebensache] Ich habe hier eine ATI Radeon Mobility X1600 mit dem radeon am laufen. Kein Compiz, aber die Effekte von Kwin/KDE4 und es läuft wunderbar. Hätte ich eine xorg.conf, dann könnte ... , aber ich habe keine. :/ [/Nebensache]
Stell doch mal bitte die ganze glxinfo in einen NoPasteService.