Hallo zusammen
Ich habe einen BIND9 und DHCP Server am laufen. Der DHCP funktioniert. Wenn ich aber nun einen Windoof-Rechner habe der ein IPLease anfordert, dann wird der DNS nicht aktualisiert. In der /var/log/messages erhalte ich folgende Ausgabe:
meine dhcpd.conf
meine named.conf
kann hier jemand einen Fehler finden?
Vielen Dank für eure Hilfe
Ich habe einen BIND9 und DHCP Server am laufen. Der DHCP funktioniert. Wenn ich aber nun einen Windoof-Rechner habe der ein IPLease anfordert, dann wird der DNS nicht aktualisiert. In der /var/log/messages erhalte ich folgende Ausgabe:
Code:
Nov 19 11:43:57 tssrv02 dhcpd: if IN A testclnt.ts-management.ch domain doesn't exist add 10800 IN A testclnt.ts-management.ch 10.4.4.200 add 10800 IN TXT testclnt.ts-management.ch "314d9f82af6cea2d5ca5fc5e761fa802d7": bad DNS key.
meine dhcpd.conf
Code:
#
# Subnet: 10.4.4.0
# Netmask: 255.255.255.0
# Purpose:
#
# include "etc/rndc.key";
key ddnsupdater {
algorithm hmac-md5;
secret "test";
}
zone ts-management.ch {
key ddnsupdater;
}
ddns-updates on;
ddns-update-style interim;
ddns-domainname "ts-management.ch";
subnet 10.4.4.0 netmask 255.255.255.0 {
### Configuration sent to the DHCP client ###
# Gateway
option routers 10.4.4.254;
option subnet-mask 255.255.255.0;
# DNS
option domain-name "ts-management.ch";
option domain-name-servers 10.4.4.25;
# Windows-specific stuff
option ntp-servers 198.82.162.213, 198.82.161.227;
option netbios-name-servers 198.82.162.243, 198.82.162.242;
option netbios-node-type 2; # Change at your own risk
# Misc
option time-offset -18000; # Eastern Standard Time
### What are we doing to serve? ###
range 10.4.4.50 10.4.4.200;
default-lease-time 21600;
max-lease-time 43200;
deny bootp; # Don't step on dogwood.ee.vt.edu's boot server
# Dogwood is the print server and configures the
# WSLab's HP JetDirect printers on our local
# ethernet segment.
### Fixed IP addresses inside subnet to follow ###
# No fixed IP addresses in this subnet
}
meine named.conf
Code:
options {
directory "/var/named";
/*
* If there is a FW between you and nameservers you want
* to talk to, you might need to uncomment the query-source
* directive below. Previous versions of BIND always asked
* questions using port 53, but BIND 8.1 uses an unprivileged
* port by default.*/
query-source address * port 53;
/*
* The forwarders are the DNS servers run by our service provider;
* you will want to change them to match the ones provided by
* your ISP.*/
forwarders {
195.186.4.111;
195.186.1.110;
};
};
/*
* a chaching only nameserver config
*/
controls {
inet 127.0.0.1 allow { localhost; } keys { rndckey; };
};
/* The following is the dynamic DNS zone. You'll want to change it someting
* appropriate for you matches your site. */
key ddnsupdater {
/* Key to update ts-management.ch*/
algorithm hmac-md5;
secret "test";
};
zone "ts-management.ch" {
type master;
file "ts-management.ch";
allow-update { key ddnsupdater; };
# allow-update { 127/8; 10.4.4/24; };
};
zone "." {
type hint;
file "named.ca";
};
zone "localhost" IN {
type master;
file "localhost.zone";
allow-update { none; };
};
zone "0.0.127.in-addr.arpa" IN {
type master;
file "named.local";
allow-update { none; };
};
//include "/etc/rndc.key";
kann hier jemand einen Fehler finden?
Vielen Dank für eure Hilfe