• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Fänomen bei Dell Inspiron 1090

rbest

rbest

hi Leute, jetzt hab ich mir wieder neue Merkwürdigkeiten ins Haus geholt. Im Media Markt hat mich ein Dell Inspiron 1090 angefleht, ich soll ihn mitnehmen. Kurzerhand hab ich mich seiner erbarmt und ihm zuhause eine Wellness-Kur mit Suse 11.3 verpasst. Hat alles gut funktioniert bis auf folgende Probleme, die ich nicht so recht analysieren kann.

Aus unerfindlichen Gründen funktioniert oft das Soundsystem nicht und beim Antouchen des Touchscreen verflüchtigt sich der Cursor in die linke obere Ecke. Wenn einmal der Touchscreen funktioniert, dann geht idR auch das Soundsystem. Aber, der Cursor funktioniert auch oft nicht auf der aktuellen Anwendung, sondern bewegt sich HINTER der Anwendung auf dem Desktop. Hört sich außerirdisch an, ich weiß. Ich habe wieder auch mal keinen Plan, wo ich hinlangen soll. Installiert ist offenbar alles, dass es funktionieren KÖNNTE.

Hoffnung auf Hilfe hab ich wenig, da ich auch keine genauen Angaben machen kann, aber wer weiß, manchmal geschehen ja Wunder :D
 
rbest schrieb:
Hoffnung auf Hilfe hab ich wenig, da ich auch keine genauen Angaben machen kann, aber wer weiß, manchmal geschehen ja Wunder :D
Zum Vergrößern anklicken....

Du kannst genauere Angaben machen. Welcher Soundchip ist verbaut, welche Grafikkarte wird verwendet? Poste mal die Ausgabe von
Code: 
egrep "WW|EE" /var/log/Xorg.0.log
 
mach ich
Code: 
[    22.351] Current Operating System: Linux r-mini 2.6.34.7-0.7-desktop #1 SMP PREEMPT 2010-12-13 11:13:53 +0100 i686
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    22.358] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[    22.358] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    22.358] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[    22.429] (II) Loading extension MIT-SCREEN-SAVER
[    22.502] (WW) Falling back to old probe method for fbdev
[    22.505] (WW) Falling back to old probe method for vesa
[    23.204] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-90BEB0384DFE894FC6C76430E8611BB0119B95EE.xkm
[    23.229] (EE) No input driver/identifier specified (ignoring)
[    23.252] (EE) No input driver/identifier specified (ignoring)
[    23.327] (EE) No input driver/identifier specified (ignoring)
[    23.328] (EE) No input driver/identifier specified (ignoring)

und - just in the moment - kam, nachdem ich versehentlich wlan ausgeschaltet hatte und windows starten musste, weil es sich in Linux nach dem Ausschalten nicht wieder einschalten lässt, nach dem Einloggen die Startmelodie von Suse. Sprich, in dieser Sitzung geht der sound wieder ...
 
spoensche schrieb:
Ist das Problem jetzt gelöst?
Zum Vergrößern anklicken....

die letzten beiden Male hat sich das System nach dem Hochfahren tatsächlich akkustisch gemeldet. Frag mich nicht, welche Aktion bewirkt, dass es nicht mehr geht. Nur ein Beispiel. Ich habe festgestellt, wenn ich den WiFi-Schalter drücke, kann ich WLAN zwar ausschalten, aber nicht mehr ein. Ob es sich über Konsole wieder starten ließe, hab ich nicht probiert - bei aktivem Networkmanager wahrscheinlich nicht.?!??

Wesentlich eindeutiger ist das Touchscreen. Es funktioniert nie 100% richtig. Entweder es geht gar nicht, dann verflüchtigt sich der Cursor in die Ecke links oben. Oder es geht ein bischen, dann kann ich den Cursor auf dem Desktop bewegen und Programme starten. Aber die Programme lassen sich nicht bedienen, der Cursor bewegt sich immer hinter dem Fenster.

Bin ich einfach nur zu früh dran oder muß ich nach einem Zusatzmodul für Touchscreens suchen?
 
Tritt das akustische Signal unmittelbar nach dem Einschalten auf? Wenn ja, dann ist das ein POST- Code des BIOS. Beschreib das Signal mal genauer, ist es eher kurz, oder kurz gefolgt von lang (böp böööööööööööp)

Das, per vorgesehenem Button, hardwarebasierende Ein- und Ausschalten ist unabhängig vom NetworkManager.

Was ist den für Hardware in dem Notebook verbaut? Dazu postest du mal die Ausgaben folgender Befehle:

Code: 
hwinfo --netcard
hwinfo --gfxcard
hwinfo --monitor

Zusätzlich stellst du die Ausgabe von
Code: 
dmesg
bei Pastebin ein ubnd postest den Link hier.
 
mach ich:
[Created at pci.318]
Unique ID: y9sn.FR1No5WFY97
Parent ID: qTvu.kekTNY_Txu1
SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:02:00.0
SysFS BusID: 0000:02:00.0
Hardware Class: network
Model: "Atheros AR9285 Wireless Network Adapter (PCI-Express)"
Vendor: pci 0x168c "Atheros Communications Inc."
Device: pci 0x002b "AR9285 Wireless Network Adapter (PCI-Express)"
SubVendor: pci 0x168c "Atheros Communications Inc."
SubDevice: pci 0x0205
Revision: 0x01
Driver: "ath9k"
Driver Modules: "ath9k"
Device File: wlan0
Features: WLAN
Memory Range: 0x97000000-0x9700ffff (rw,non-prefetchable)
IRQ: 17 (11112 events)
HW Address: 88:25:2c:c3:dc:08
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v0000168Cd0000002Bsv0000168Csd00000205bc02sc80i00"
Driver Info #0:
Driver Status: ath9k is active
Driver Activation Cmd: "modprobe ath9k"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #13 (PCI bridge)
Zum Vergrößern anklicken....

Code: 
09: PCI 02.0: 0300 VGA compatible controller (VGA)                                                    
  [Created at pci.318]                                                                                
  Unique ID: _Znp.dz7awhVz921                                                                         
  SysFS ID: /devices/pci0000:00/0000:00:02.0                                                          
  SysFS BusID: 0000:00:02.0                                                                           
  Hardware Class: graphics card                                                                       
  Model: "Intel Pineview Integrated Graphics Controller"                                              
  Vendor: pci 0x8086 "Intel Corporation"                                                              
  Device: pci 0xa011 "Pineview Integrated Graphics Controller"                                        
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x048b 
  Revision: 0x02
  Driver: "i915"
  Driver Modules: "drm"
  Memory Range: 0x98180000-0x981fffff (rw,non-prefetchable)
  I/O Ports: 0x50c0-0x50c7 (rw)
  Memory Range: 0x80000000-0x8fffffff (ro,non-prefetchable)
  Memory Range: 0x98000000-0x980fffff (rw,non-prefetchable)
  IRQ: 29 (13403 events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v00008086d0000A011sv00001028sd0000048Bbc03sc00i00"
  Driver Info #0:
    Driver Status: i915 is active
    Driver Activation Cmd: "modprobe i915"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

10: PCI 02.1: 0380 Display controller
  [Created at pci.318]
  Unique ID: ruGf.8QVCqXodRf6
  SysFS ID: /devices/pci0000:00/0000:00:02.1
  SysFS BusID: 0000:00:02.1
  Hardware Class: graphics card
  Model: "Intel Pineview Integrated Graphics Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0xa012 "Pineview Integrated Graphics Controller"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x048b 
  Revision: 0x02
  Memory Range: 0x98100000-0x9817ffff (rw,non-prefetchable)
  Module Alias: "pci:v00008086d0000A012sv00001028sd0000048Bbc03sc80i00"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

Primary display adapter: #9

Code: 
27: None 00.0: 10002 LCD Monitor                                
  [Created at monitor.95]
  Unique ID: rdCR.Gsv_bSrJiM8
  Hardware Class: monitor
  Model: "46Y3M 101WH1 LCD Monitor"
  Vendor: LGD "46Y3M 101WH1"
  Device: eisa 0x02bb 
  Resolution: 1366x768@60Hz
  Size: 223x125 mm
  Detailed Timings #0:
     Resolution: 1366x768
     Horizontal: 1366 1414 1446 1833 (+48 +80 +467) -hsync
       Vertical:  768  771  776  968 (+3 +8 +200) +vsync
    Frequencies: 71.00 MHz, 38.73 kHz, 40.01 Hz
  Detailed Timings #1:
     Resolution: 1366x768
     Horizontal: 1366 1414 1446 1498 (+48 +80 +132) -hsync
       Vertical:  768  771  776  790 (+3 +8 +22) +vsync
    Frequencies: 71.00 MHz, 47.40 kHz, 60.00 Hz
  Config Status: cfg=no, avail=yes, need=no, active=unknown

28: None 00.2: 10002 LCD Monitor
  [Created at monitor.95]
  Unique ID: aHB6.Gsv_bSrJiM8
  Hardware Class: monitor
  Model: "46Y3M 101WH1 LCD Monitor"
  Vendor: LGD "46Y3M 101WH1"
  Device: eisa 0x02bb 
  Resolution: 1366x768@60Hz
  Size: 223x125 mm
  Detailed Timings #0:
     Resolution: 1366x768
     Horizontal: 1366 1414 1446 1833 (+48 +80 +467) -hsync
       Vertical:  768  771  776  968 (+3 +8 +200) +vsync
    Frequencies: 71.00 MHz, 38.73 kHz, 40.01 Hz
  Detailed Timings #1:
     Resolution: 1366x768
     Horizontal: 1366 1414 1446 1498 (+48 +80 +132) -hsync
       Vertical:  768  771  776  790 (+3 +8 +22) +vsync
    Frequencies: 71.00 MHz, 47.40 kHz, 60.00 Hz
  Config Status: cfg=no, avail=yes, need=no, active=unknown
 
hier noch dmesg:
Code: 
[    0.000000] Linux version 2.6.34.7-0.7-desktop (geeko@buildhost) (gcc version 4.5.0 20100604 [gcc-4_5-branch revision 160292] (SUSE Linux) ) #1 SMP PREEMPT 2010-12-13 11:13:53 +0100
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f43f000 (usable)
[    0.000000]  BIOS-e820: 000000007f43f000 - 000000007f4bf000 (reserved)
[    0.000000]  BIOS-e820: 000000007f4bf000 - 000000007f5bf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f5bf000 - 000000007f5ff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007f5ff000 - 000000007f600000 (usable)
[    0.000000]  BIOS-e820: 000000007f600000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask 0FFE00000 write-protect
[    0.000000]   1 base 000000000 mask 0C0000000 write-back
[    0.000000]   2 base 040000000 mask 0C0000000 write-back
[    0.000000]   3 base 07F800000 mask 0FF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 base 07F600000 mask FFFF00000 write-back
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (reserved)
[    0.000000]  modified: 0000000000001000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007f43f000 (usable)
[    0.000000]  modified: 000000007f43f000 - 000000007f4bf000 (reserved)
[    0.000000]  modified: 000000007f4bf000 - 000000007f5bf000 (ACPI NVS)
[    0.000000]  modified: 000000007f5bf000 - 000000007f5ff000 (ACPI data)
[    0.000000]  modified: 000000007f5ff000 - 000000007f600000 (usable)
[    0.000000]  modified: 000000007f600000 - 0000000080000000 (reserved)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 01000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000371fe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037000000 page 2M
[    0.000000]  0037000000 - 00371fe000 page 4k
[    0.000000] kernel direct mapping tables up to 371fe000 @ 15000-1f000
[    0.000000] RAMDISK: 375d9000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 00afc000 - 01512c40
[    0.000000] Move RAMDISK from 00000000375d9000 - 0000000037fefc3f to 00afc000 - 01512c3f
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 7f5fe120 0007C (v01 DELL    CL09    00000001      01000013)
[    0.000000] ACPI: FACP 7f5fd000 000F4 (v04 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: DSDT 7f5f3000 06F04 (v01 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: FACS 7f582000 00040
[    0.000000] ACPI: HPET 7f5fc000 00038 (v01 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: APIC 7f5fb000 00078 (v02 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: MCFG 7f5fa000 0003C (v01 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: SLIC 7f5f2000 00176 (v01 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: BOOT 7f5f1000 00028 (v01 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: OSFR 7f5f0000 00080 (v01 DELL    CL09    27D60B15 ASL  01000013)
[    0.000000] ACPI: SSDT 7f5ef000 00655 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 7f5ee000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 7f5ed000 0020F (v01  PmRef    ApTst 00003000 INTL 20051117)
[    0.000000] ACPI: WDAT 7f5ec000 00194 (v01 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] could not find any ACPI SRAT memory areas.
[    0.000000] failed to get NUMA memory information from SRAT table
[    0.000000] NUMA - single node, flat memory mode
[    0.000000] Node: 0, start_pfn: 0, end_pfn: 7f600
[    0.000000]   Setting physnode_map array to node 0 for pfns:
[    0.000000]   0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000 60000 64000 68000 6c000 70000 74000 78000 7c000 
[    0.000000] node 0 pfn: [0 - 7f600]
[    0.000000] Reserving 4096 pages of KVA for lmem_map of node 0 at 7e400
[    0.000000] remove_active_range (0, 517120, 521216)
[    0.000000] Reserving total of 1000 pages for numa KVA remap
[    0.000000] kva_start_pfn ~ 36000 max_low_pfn ~ 371fe
[    0.000000] max_pfn = 7f600
[    0.000000] 1156MB HIGHMEM available.
[    0.000000] 881MB LOWMEM available.
[    0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe
[    0.000000] Low memory ends at vaddr f71fe000
[    0.000000] node 0 will remap to vaddr f6000000 - f7000000
[    0.000000] allocate_pgdat: node 0 NODE_DATA f6000000
[    0.000000] remap_numa_kva: node 0
[    0.000000] remap_numa_kva: f6000000 to pfn 0007e400
[    0.000000] remap_numa_kva: f6200000 to pfn 0007e600
[    0.000000] remap_numa_kva: f6400000 to pfn 0007e800
[    0.000000] remap_numa_kva: f6600000 to pfn 0007ea00
[    0.000000] remap_numa_kva: f6800000 to pfn 0007ec00
[    0.000000] remap_numa_kva: f6a00000 to pfn 0007ee00
[    0.000000] remap_numa_kva: f6c00000 to pfn 0007f000
[    0.000000] remap_numa_kva: f6e00000 to pfn 0007f200
[    0.000000] High memory starts at vaddr f71fe000
[    0.000000]   mapped low ram: 0 - 371fe000
[    0.000000]   low ram: 0 - 371fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000001 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000371fe
[    0.000000]   HighMem  0x000371fe -> 0x0007f600
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000001 -> 0x00000002
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007e400
[    0.000000]     0: 0x0007f400 -> 0x0007f43f
[    0.000000]     0: 0x0007f5ff -> 0x0007f600
[    0.000000] On node 0 totalpages: 517072
[    0.000000] free_area_init_node: node 0, pgdat f6000000, node_mem_map f6002020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3952 pages, LIFO batch:0
[    0.000000]   Normal zone: 1732 pages used for memmap
[    0.000000]   Normal zone: 219962 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2313 pages used for memmap
[    0.000000]   HighMem zone: 289081 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] early_res array is doubled to 64 at [1c000 - 1c7ff]
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:8
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1600000 s34900 r0 d22444 u524288
[    0.000000] pcpu-alloc: s34900 r0 d22444 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 512995
[    0.000000] Policy zone: HighMem
[    0.000000] Kernel command line: root=/dev/disk/by-id/ata-Hitachi_HTS723232A7A364_E3834063G3R67A-part7 resume=/dev/disk/by-id/ata-Hitachi_HTS723232A7A364_E3834063G3R67A-part6 splash=silent quiet vga=0x317
[    0.000000] bootsplash: silent mode.
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Subtract (53 early reservations)
[    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
[    0.000000]   #2 [0000200000 - 0000af2f64]   TEXT DATA BSS
[    0.000000]   #3 [000009f800 - 0000100000]   BIOS reserved
[    0.000000]   #4 [0000af3000 - 0000afb25f]             BRK
[    0.000000]   #5 [0000010000 - 0000011000]      TRAMPOLINE
[    0.000000]   #6 [0000011000 - 0000015000]     ACPI WAKEUP
[    0.000000]   #7 [0000015000 - 000001c000]         PGTABLE
[    0.000000]   #8 [0000afc000 - 0001513000]     NEW RAMDISK
[    0.000000]   #9 [007e400000 - 007f400000]         KVA RAM
[    0.000000]   #10 [0036000000 - 0037000000]          KVA PG
[    0.000000]   #11 [0001513000 - 0001514000]         BOOTMEM
[    0.000000]   #12 [0001514000 - 0001514004]         BOOTMEM
[    0.000000]   #13 [0001514040 - 0001514100]         BOOTMEM
[    0.000000]   #14 [0001514100 - 00015141a4]         BOOTMEM
[    0.000000]   #15 [00015141c0 - 00015171c0]         BOOTMEM
[    0.000000]   #16 [00015171c0 - 000151729c]         BOOTMEM
[    0.000000]   #17 [00015172c0 - 000151d2c0]         BOOTMEM
[    0.000000]   #18 [000151d2c0 - 000151d2ed]         BOOTMEM
[    0.000000]   #19 [000151d300 - 000151d32f]         BOOTMEM
[    0.000000]   #20 [000151d340 - 000151d5c8]         BOOTMEM
[    0.000000]   #21 [000151d600 - 000151d640]         BOOTMEM
[    0.000000]   #22 [000151d640 - 000151d680]         BOOTMEM
[    0.000000]   #23 [000151d680 - 000151d6c0]         BOOTMEM
[    0.000000]   #24 [000151d6c0 - 000151d700]         BOOTMEM
[    0.000000]   #25 [000151d700 - 000151d740]         BOOTMEM
[    0.000000]   #26 [000151d740 - 000151d780]         BOOTMEM
[    0.000000]   #27 [000151d780 - 000151d7c0]         BOOTMEM
[    0.000000]   #28 [000151d7c0 - 000151d800]         BOOTMEM
[    0.000000]   #29 [000151d800 - 000151d840]         BOOTMEM
[    0.000000]   #30 [000151d840 - 000151d880]         BOOTMEM
[    0.000000]   #31 [000151d880 - 000151d8c0]         BOOTMEM
[    0.000000]   #32 [000151d8c0 - 000151d900]         BOOTMEM
[    0.000000]   #33 [000151d900 - 000151d940]         BOOTMEM
[    0.000000]   #34 [000151d940 - 000151d980]         BOOTMEM
[    0.000000]   #35 [000151d980 - 000151d9c0]         BOOTMEM
[    0.000000]   #36 [000151d9c0 - 000151d9d0]         BOOTMEM
[    0.000000]   #37 [000151da00 - 000151da10]         BOOTMEM
[    0.000000]   #38 [000151da40 - 000151daec]         BOOTMEM
[    0.000000]   #39 [000151db00 - 000151dbac]         BOOTMEM
[    0.000000]   #40 [0001600000 - 000160e000]         BOOTMEM
[    0.000000]   #41 [0001680000 - 000168e000]         BOOTMEM
[    0.000000]   #42 [0001700000 - 000170e000]         BOOTMEM
[    0.000000]   #43 [0001780000 - 000178e000]         BOOTMEM
[    0.000000]   #44 [000151fbc0 - 000151fbc4]         BOOTMEM
[    0.000000]   #45 [000151fc00 - 000151fc04]         BOOTMEM
[    0.000000]   #46 [000151fc40 - 000151fc50]         BOOTMEM
[    0.000000]   #47 [000151fc80 - 000151fc90]         BOOTMEM
[    0.000000]   #48 [000151fcc0 - 000151fd58]         BOOTMEM
[    0.000000]   #49 [000151fd80 - 000151fdb8]         BOOTMEM
[    0.000000]   #50 [000151fdc0 - 0001523dc0]         BOOTMEM
[    0.000000]   #51 [0001523dc0 - 00015a3dc0]         BOOTMEM
[    0.000000]   #52 [00015a3dc0 - 00015e3dc0]         BOOTMEM
[    0.000000] Initializing HighMem for node 0 (000371fe:0007f600)
[    0.000000] Memory: 2031264k/2086912k available (4443k kernel code, 37024k reserved, 3275k data, 424k init, 1165576k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xff5b4000 - 0xfffff000   (10540 kB)
[    0.000000]     pkmap   : 0xff200000 - 0xff400000   (2048 kB)
[    0.000000]     vmalloc : 0xf79fe000 - 0xff1fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf71fe000   ( 881 MB)
[    0.000000]       .init : 0xc098a000 - 0xc09f4000   ( 424 kB)
[    0.000000]       .data : 0xc0656fc0 - 0xc0989ca8   (3275 kB)
[    0.000000]       .text : 0xc0200000 - 0xc0656fc0   (4443 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:8448 nr_irqs:440
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1496.418 MHz processor.
[    0.001009] Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.83 BogoMIPS (lpj=1496418)
[    0.001140] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[    0.002066] Security Framework initialized
[    0.002097] AppArmor: AppArmor initialized
[    0.002159] Mount-cache hash table entries: 512
[    0.002436] CPU: Physical Processor ID: 0
[    0.002441] CPU: Processor Core ID: 0
[    0.002447] mce: CPU supports 5 MCE banks
[    0.002459] CPU0: Thermal monitoring enabled (TM2)
[    0.002466] using mwait in idle threads.
[    0.002480] Performance Events: Atom events, Intel PMU driver.
[    0.002490] ... version:                3
[    0.002493] ... bit width:              40
[    0.002497] ... generic registers:      2
[    0.002501] ... value mask:             000000ffffffffff
[    0.002506] ... max period:             000000007fffffff
[    0.002510] ... fixed-purpose events:   3
[    0.002513] ... event mask:             0000000700000003
[    0.002525] Checking 'hlt' instruction... OK.
[    0.006644] Unpacking initramfs...
[    0.478751] Freeing initrd memory: 10332k freed
[    0.487519] ACPI: Core revision 20100121
[    0.518128] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.518358] Mapping cpu 0 to node 0
[    0.518566] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.528670] CPU0: Intel(R) Atom(TM) CPU N550   @ 1.50GHz stepping 0a
[    0.534057] Booting Node   0, Processors  #1
[    0.001999] Initializing CPU#1
[    0.001999] Mapping cpu 1 to node 0
[    0.606205]  #2
[    0.001999] Initializing CPU#2
[    0.001999] Mapping cpu 2 to node 0
[    0.677999] TSC synchronization [CPU#1 -> CPU#2]:
[    0.677999] Measured 27 cycles TSC warp between CPUs, turning off TSC clock.
[    0.677999] Marking TSC unstable due to check_tsc_sync_source failed
[    0.697309]  #3 Ok.
[    0.001999] Initializing CPU#3
[    0.001999] Mapping cpu 3 to node 0
[    0.768024] Brought up 4 CPUs
[    0.768036] Total of 4 processors activated (11970.81 BogoMIPS).
[    0.773153] devtmpfs: initialized
[    0.774124] regulator: core version 0.5
[    0.774233] regulator: dummy: 
[    0.774270] Time: 11:25:47  Date: 01/31/11
[    0.774471] NET: Registered protocol family 16
[    0.775189] ACPI: bus type pci registered
[    0.775410] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.775424] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.775431] PCI: Using MMCONFIG for extended config space
[    0.775438] PCI: Using configuration type 1 for base access
[    0.783411] bio: create slab <bio-0> at 0
[    0.794631] ACPI: EC: Look up EC in DSDT
[    0.802421] ACPI: Executed 1 blocks of module-level executable AML code
[    0.811893] ACPI: BIOS _OSI(Linux) query ignored
[    0.817791] ACPI: SSDT 7f497790 00747 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.821390] ACPI: SSDT 7f496c10 001C3 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.825342] ACPI: SSDT 7f496e10 001B5 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.828064] ACPI: SSDT 7f497f10 000C9 (v02  PmRef    ApCst 00003000 INTL 20051117)
[    0.875373] ACPI: Interpreter enabled
[    0.876008] ACPI: (supports S0 S3 S4 S5)
[    0.876095] ACPI: Using IOAPIC for interrupt routing
[    0.942037] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.942216] ACPI: Power Resource [FN00] (on)
[    0.942991] ACPI: No dock devices found.
[    0.943010] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.945076] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.948435] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.948444] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.948452] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.948462] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[    0.948554] pci 0000:00:02.0: reg 10: [mem 0x98180000-0x981fffff]
[    0.948563] pci 0000:00:02.0: reg 14: [io  0x50c0-0x50c7]
[    0.948572] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff pref]
[    0.948580] pci 0000:00:02.0: reg 1c: [mem 0x98000000-0x980fffff]
[    0.948629] pci 0000:00:02.1: reg 10: [mem 0x98100000-0x9817ffff]
[    0.948753] pci 0000:00:1b.0: reg 10: [mem 0x98200000-0x98203fff 64bit]
[    0.948826] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.948834] pci 0000:00:1b.0: PME# disabled
[    0.948951] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.948960] pci 0000:00:1c.0: PME# disabled
[    0.949091] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.949102] pci 0000:00:1c.1: PME# disabled
[    0.949221] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.949229] pci 0000:00:1c.2: PME# disabled
[    0.949352] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.949360] pci 0000:00:1c.3: PME# disabled
[    0.949440] pci 0000:00:1d.0: reg 20: [io  0x5080-0x509f]
[    0.949522] pci 0000:00:1d.1: reg 20: [io  0x5060-0x507f]
[    0.949602] pci 0000:00:1d.2: reg 20: [io  0x5040-0x505f]
[    0.949683] pci 0000:00:1d.3: reg 20: [io  0x5020-0x503f]
[    0.949761] pci 0000:00:1d.7: reg 10: [mem 0x98204400-0x982047ff]
[    0.949833] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.949841] pci 0000:00:1d.7: PME# disabled
[    0.950115] pci 0000:00:1f.2: reg 10: [io  0x50b8-0x50bf]
[    0.950128] pci 0000:00:1f.2: reg 14: [io  0x50cc-0x50cf]
[    0.950139] pci 0000:00:1f.2: reg 18: [io  0x50b0-0x50b7]
[    0.950150] pci 0000:00:1f.2: reg 1c: [io  0x50c8-0x50cb]
[    0.950161] pci 0000:00:1f.2: reg 20: [io  0x50a0-0x50af]
[    0.950173] pci 0000:00:1f.2: reg 24: [mem 0x98204000-0x982043ff]
[    0.950216] pci 0000:00:1f.2: PME# supported from D3hot
[    0.950224] pci 0000:00:1f.2: PME# disabled
[    0.950296] pci 0000:00:1f.3: reg 20: [io  0x5000-0x501f]
[    0.950477] pci 0000:01:00.0: reg 10: [mem 0x90800000-0x9080ffff 64bit]
[    0.950508] pci 0000:01:00.0: reg 18: [mem 0x90000000-0x907fffff 64bit]
[    0.950688] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.950697] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.950706] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff]
[    0.950718] pci 0000:00:1c.0:   bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[    0.950840] pci 0000:02:00.0: reg 10: [mem 0x97000000-0x9700ffff 64bit]
[    0.950930] pci 0000:02:00.0: supports D1
[    0.950936] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.950945] pci 0000:02:00.0: PME# disabled
[    0.953030] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.953040] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.953049] pci 0000:00:1c.1:   bridge window [mem 0x97000000-0x97ffffff]
[    0.953062] pci 0000:00:1c.1:   bridge window [mem 0x92000000-0x92ffffff 64bit pref]
[    0.953136] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.953144] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.953152] pci 0000:00:1c.2:   bridge window [mem 0x96000000-0x96ffffff]
[    0.953164] pci 0000:00:1c.2:   bridge window [mem 0x93000000-0x93ffffff 64bit pref]
[    0.953236] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.953245] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.953253] pci 0000:00:1c.3:   bridge window [mem 0x95000000-0x95ffffff]
[    0.953265] pci 0000:00:1c.3:   bridge window [mem 0x94000000-0x94ffffff 64bit pref]
[    0.953366] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.953375] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.953385] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.953397] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.953404] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.953411] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.953418] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.953425] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[    0.953477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.953952] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[    0.954347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.954614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.954879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[    0.955155] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[    0.983217] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.983564] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.983905] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.984273] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.984616] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.984960] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.985319] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.985663] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.986327] SCSI subsystem initialized
[    0.986417] libata version 3.00 loaded.
[    0.986417] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.986417] vgaarb: loaded
[    0.986417] usbcore: registered new interface driver usbfs
[    0.987029] usbcore: registered new interface driver hub
[    0.987126] usbcore: registered new device driver usb
[    0.987192] PCI: Using ACPI for IRQ routing
[    0.987192] PCI: pci_cache_line_size set to 64 bytes
[    0.987283] reserve RAM buffer: 0000000000002000 - 000000000000ffff 
[    0.987290] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.987297] reserve RAM buffer: 000000007f43f000 - 000000007fffffff 
[    0.987306] reserve RAM buffer: 000000007f600000 - 000000007fffffff 
[    0.987525] NetLabel: Initializing
[    0.987530] NetLabel:  domain hash size = 128
[    0.987534] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.987565] NetLabel:  unlabeled traffic allowed by default
[    0.987576] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.987587] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.987598] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.991033] Switching to clocksource hpet
[    0.996125] AppArmor: AppArmor Filesystem Enabled
[    0.996172] pnp: PnP ACPI init
[    0.996214] ACPI: bus type pnp registered
[    1.000513] pnp 00:01: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io  0x1000-0x1fff]
[    1.024659]   alloc irq_desc for 20 on node 0
[    1.024668]   alloc kstat_irqs on node 0
[    1.024929] pnp: PnP ACPI: found 10 devices
[    1.024937] ACPI: ACPI bus type pnp unregistered
[    1.024978] system 00:01: [io  0x0600-0x060f] has been reserved
[    1.024990] system 00:01: [io  0x0610] has been reserved
[    1.025001] system 00:01: [io  0x0800-0x080f] has been reserved
[    1.025013] system 00:01: [io  0x0810-0x0817] has been reserved
[    1.025024] system 00:01: [io  0x0400-0x047f] has been reserved
[    1.025035] system 00:01: [io  0x0500-0x053f] has been reserved
[    1.025049] system 00:01: [io  0xff2c-0xff2f] has been reserved
[    1.025064] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    1.025076] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.025088] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    1.025100] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.025112] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.025124] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.025136] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    1.061047] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    1.061062] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    1.061077] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff]
[    1.061092] pci 0000:00:1c.0:   bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[    1.061110] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    1.061120] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    1.061135] pci 0000:00:1c.1:   bridge window [mem 0x97000000-0x97ffffff]
[    1.061148] pci 0000:00:1c.1:   bridge window [mem 0x92000000-0x92ffffff 64bit pref]
[    1.061165] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    1.061175] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    1.061189] pci 0000:00:1c.2:   bridge window [mem 0x96000000-0x96ffffff]
[    1.061202] pci 0000:00:1c.2:   bridge window [mem 0x93000000-0x93ffffff 64bit pref]
08:bc:05:43:3f:61:e6:08:00 SRC=192.168.178.1 DST=192.168.178.36 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=43984 DF PROTO=TCP SPT=3918 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A031AEF1E0000000001030303)
 
der Rest von dmesg:
Code: 
[    1.061219] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    1.061229] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    1.061244] pci 0000:00:1c.3:   bridge window [mem 0x95000000-0x95ffffff]
[    1.061278] pci 0000:00:1c.3:   bridge window [mem 0x94000000-0x94ffffff 64bit pref]
[    1.061295] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    1.061302] pci 0000:00:1e.0:   bridge window [io  disabled]
[    1.061314] pci 0000:00:1e.0:   bridge window [mem disabled]
[    1.061325] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    1.061363]   alloc irq_desc for 16 on node -1
[    1.061370]   alloc kstat_irqs on node -1
[    1.061389] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.061403] pci 0000:00:1c.0: setting latency timer to 64
[    1.061433]   alloc irq_desc for 17 on node -1
[    1.061440]   alloc kstat_irqs on node -1
[    1.061454] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.061466] pci 0000:00:1c.1: setting latency timer to 64
[    1.061489]   alloc irq_desc for 18 on node -1
[    1.061496]   alloc kstat_irqs on node -1
[    1.061508] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.061521] pci 0000:00:1c.2: setting latency timer to 64
[    1.061543]   alloc irq_desc for 19 on node -1
[    1.061549]   alloc kstat_irqs on node -1
[    1.061562] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.061575] pci 0000:00:1c.3: setting latency timer to 64
[    1.061593] pci 0000:00:1e.0: setting latency timer to 64
[    1.061606] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.061616] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.061625] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.061634] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[    1.061644] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    1.061653] pci_bus 0000:01: resource 1 [mem 0x90000000-0x90ffffff]
[    1.061663] pci_bus 0000:01: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
[    1.061673] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    1.061682] pci_bus 0000:02: resource 1 [mem 0x97000000-0x97ffffff]
[    1.061692] pci_bus 0000:02: resource 2 [mem 0x92000000-0x92ffffff 64bit pref]
[    1.061702] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    1.061711] pci_bus 0000:03: resource 1 [mem 0x96000000-0x96ffffff]
[    1.061720] pci_bus 0000:03: resource 2 [mem 0x93000000-0x93ffffff 64bit pref]
[    1.061730] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    1.061739] pci_bus 0000:04: resource 1 [mem 0x95000000-0x95ffffff]
[    1.061749] pci_bus 0000:04: resource 2 [mem 0x94000000-0x94ffffff 64bit pref]
[    1.061759] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    1.061768] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    1.061777] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    1.061786] pci_bus 0000:05: resource 7 [mem 0x80000000-0xfebfffff]
[    1.062084] NET: Registered protocol family 2
[    1.062400] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.063571] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.065176] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.065934] TCP: Hash tables configured (established 131072 bind 65536)
[    1.065944] TCP reno registered
[    1.065965] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.065996] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.066511] NET: Registered protocol family 1
[    1.066570] pci 0000:00:02.0: Boot video device
[    1.078107] PCI: CLS 64 bytes, default 64
[    1.078316] Simple Boot Flag at 0x44 set to 0x1
[    1.079908] Scanning for low memory corruption every 60 seconds
[    1.080477] audit: initializing netlink socket (disabled)
[    1.080514] type=2000 audit(1296473147.080:1): initialized
[    1.116028] highmem bounce pool size: 64 pages
[    1.116048] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.117076] VFS: Disk quotas dquot_6.5.2
[    1.117190] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.117884] msgmni has been set to 427
[    1.118538] alg: No test for stdrng (krng)
[    1.118675] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.118686] io scheduler noop registered
[    1.118692] io scheduler deadline registered
[    1.118792] io scheduler cfq registered (default)
[    1.119507] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.119582]   alloc irq_desc for 24 on node -1
[    1.119589]   alloc kstat_irqs on node -1
[    1.119616] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    1.119878] pcieport 0000:00:1c.1: setting latency timer to 64
[    1.119946]   alloc irq_desc for 25 on node -1
[    1.119953]   alloc kstat_irqs on node -1
[    1.119975] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    1.120234] pcieport 0000:00:1c.2: setting latency timer to 64
[    1.120334]   alloc irq_desc for 26 on node -1
[    1.120341]   alloc kstat_irqs on node -1
[    1.120369] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[    1.120633] pcieport 0000:00:1c.3: setting latency timer to 64
[    1.120702]   alloc irq_desc for 27 on node -1
[    1.120709]   alloc kstat_irqs on node -1
[    1.120730] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[    1.121107] pci-stub: invalid id string ""
[    1.123616] vesafb: framebuffer at 0x80000000, mapped to 0xf7a80000, using 3072k, total 8128k
[    1.123629] vesafb: mode is 1024x768x16, linelength=2048, pages=4
[    1.123635] vesafb: scrolling: redraw
[    1.123646] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    1.124623] bootsplash 3.1.6-2004/03/31: looking for picture...
[    1.124636] bootsplash: silentjpeg size 157558 bytes
[    1.194430] bootsplash: ...found (1024x768, 80639 bytes, v3).
[    1.195702] bootsplash: silentjpeg size 176790 bytes
[    1.460606] Console: switching to colour frame buffer device 124x44
[    1.634323] fb0: VESA VGA frame buffer device
[    1.641386] Non-volatile memory driver v1.3
[    1.641400] Linux agpgart interface v0.103
[    1.641486] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    1.643197] ahci 0000:00:1f.2: version 3.0
[    1.643238] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.643359]   alloc irq_desc for 28 on node -1
[    1.643367]   alloc kstat_irqs on node -1
[    1.643399] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[    1.643568] ahci: SSS flag set, parallel bus scan disabled
[    1.643630] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.643644] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    1.643657] ahci 0000:00:1f.2: setting latency timer to 64
[    1.644309] scsi0 : ahci
[    1.644652] scsi1 : ahci
[    1.644828] scsi2 : ahci
[    1.645035] scsi3 : ahci
[    1.646291] ata1: SATA max UDMA/133 abar m1024@0x98204000 port 0x98204100 irq 28
[    1.646300] ata2: SATA max UDMA/133 abar m1024@0x98204000 port 0x98204180 irq 28
[    1.646306] ata3: DUMMY
[    1.646310] ata4: DUMMY
[    1.646514] Fixed MDIO Bus: probed
[    1.646534] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.646586] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.646647] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.646655] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.646709] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.646751] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.646772] ehci_hcd 0000:00:1d.7: debug port 1
[    1.650663] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.650703] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x98204400
[    1.660041] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.660104] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.660111] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.660117] usb usb1: Product: EHCI Host Controller
[    1.660122] usb usb1: Manufacturer: Linux 2.6.34.7-0.7-desktop ehci_hcd
[    1.660128] usb usb1: SerialNumber: 0000:00:1d.7
[    1.660410] hub 1-0:1.0: USB hub found
[    1.660423] hub 1-0:1.0: 8 ports detected
[    1.660604] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.660644] uhci_hcd: USB Universal Host Controller Interface driver
[    1.660743] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.660759] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.660767] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.660791] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.660831] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005080
[    1.660919] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.660927] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.660932] usb usb2: Product: UHCI Host Controller
[    1.660937] usb usb2: Manufacturer: Linux 2.6.34.7-0.7-desktop uhci_hcd
[    1.660943] usb usb2: SerialNumber: 0000:00:1d.0
[    1.661210] hub 2-0:1.0: USB hub found
[    1.661228] hub 2-0:1.0: 2 ports detected
[    1.661367] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.661383] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.661390] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.661410] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.661468] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005060
[    1.661553] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.661561] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.661566] usb usb3: Product: UHCI Host Controller
[    1.661571] usb usb3: Manufacturer: Linux 2.6.34.7-0.7-desktop uhci_hcd
[    1.661577] usb usb3: SerialNumber: 0000:00:1d.1
[    1.661817] hub 3-0:1.0: USB hub found
[    1.661832] hub 3-0:1.0: 2 ports detected
[    1.661962] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.661977] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.661984] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.662028] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.662085] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[    1.662180] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.662188] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.662193] usb usb4: Product: UHCI Host Controller
[    1.662198] usb usb4: Manufacturer: Linux 2.6.34.7-0.7-desktop uhci_hcd
[    1.662204] usb usb4: SerialNumber: 0000:00:1d.2
[    1.662442] hub 4-0:1.0: USB hub found
[    1.662454] hub 4-0:1.0: 2 ports detected
[    1.662580] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.662595] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.662602] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.662621] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.662677] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005020
[    1.662765] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.662772] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.662777] usb usb5: Product: UHCI Host Controller
[    1.662782] usb usb5: Manufacturer: Linux 2.6.34.7-0.7-desktop uhci_hcd
[    1.662788] usb usb5: SerialNumber: 0000:00:1d.3
[    1.663030] hub 5-0:1.0: USB hub found
[    1.663042] hub 5-0:1.0: 2 ports detected
[    1.663200] Initializing USB Mass Storage driver...
[    1.663293] usbcore: registered new interface driver usb-storage
[    1.663298] USB Mass Storage support registered.
[    1.663337] usbcore: registered new interface driver ums-alauda
[    1.663370] usbcore: registered new interface driver ums-cypress
[    1.663406] usbcore: registered new interface driver ums-datafab
[    1.663439] usbcore: registered new interface driver ums-freecom
[    1.663477] usbcore: registered new interface driver ums-isd200
[    1.663511] usbcore: registered new interface driver ums-jumpshot
[    1.663545] usbcore: registered new interface driver ums-karma
[    1.663580] usbcore: registered new interface driver ums-onetouch
[    1.663615] usbcore: registered new interface driver ums-sddr09
[    1.663649] usbcore: registered new interface driver ums-sddr55
[    1.663685] usbcore: registered new interface driver ums-usbat
[    1.663780] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    1.677772] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.677791] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.677990] mice: PS/2 mouse device common for all mice
[    1.678261] rtc_cmos 00:03: RTC can wake from S4
[    1.678375] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.678423] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.678453] cpuidle: using governor ladder
[    1.678459] cpuidle: using governor menu
[    1.679372] usbcore: registered new interface driver hiddev
[    1.679417] usbcore: registered new interface driver usbhid
[    1.679422] usbhid: USB HID core driver
[    1.691322] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.073452] TCP cubic registered
[    2.073719] NET: Registered protocol family 10
[    2.074676] lo: Disabled Privacy Extensions
[    2.075310] lib80211: common routines for IEEE802.11 drivers
[    2.075316] lib80211_crypt: registered algorithm 'NULL'
[    2.075348] Using IPI No-Shortcut mode
[    2.075580] PM: Checking image partition /dev/disk/by-id/ata-Hitachi_HTS723232A7A364_E3834063G3R67A-part6
[    2.104058] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.105679] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.105948] ata1.00: ATA-8: Hitachi HTS723232A7A364, EC2OA60W, max UDMA/133
[    2.105962] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.107474] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.107794] ata1.00: configured for UDMA/133
[    2.118402] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72323 EC2O PQ: 0 ANSI: 5
[    2.118982] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.119187] sd 0:0:0:0: [sda] Write Protect is off
[    2.119195] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.119266] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.119705]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[    2.227044] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.277065] usb 1-3: new high speed USB device using ehci_hcd and address 2
[    2.423061] ata2: SATA link down (SStatus 0 SControl 300)
[    2.596716] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000/0x8a0400
[    2.662596] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[    2.667846] PM: Resume from disk failed.
[    2.667885] registered taskstats version 1
[    2.668424]   Magic number: 11:837:429
[    2.668571] rtc_cmos 00:03: setting system clock to 2011-01-31 11:25:49 UTC (1296473149)
[    2.668846] Freeing unused kernel memory: 424k freed
[    2.669209] Write protecting the kernel text: 4444k
[    2.669409] Write protecting the kernel read-only data: 2976k
[    2.799577] thermal LNXTHERM:01: registered as thermal_zone0
[    2.799615] ACPI: Thermal Zone [THRM] (27 C)
[    2.938863] CE: hpet increased min_delta_ns to 7500 nsec
[    3.049856] ACPI: Fan [FAN] (on)
[    3.066423] udev: starting version 157
[    3.168765] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    3.169014] ACPI: Power Button [PWRB]
[    3.169288] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    3.169483] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    3.171442] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[    3.182536] ACPI: Sleep Button [SLPB]
[    3.182834] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    3.183300] ACPI: Lid Switch [LID0]
[    3.183697] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    3.183893] ACPI: Power Button [PWRF]
[    3.283080] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[    3.359123] [drm] Initialized drm 1.1.0 20060810
[    3.434419] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.434432] i915 0000:00:02.0: setting latency timer to 64
[    3.511473]   alloc irq_desc for 29 on node -1
[    3.511481]   alloc kstat_irqs on node -1
[    3.511498] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[    3.511511] [drm] set up 7M of stolen space
[    3.539957] usb 1-3: New USB device found, idVendor=0bda, idProduct=58f4
[    3.539971] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.539981] usb 1-3: Product: Laptop_Integrated_Webcam_1.3M
[    3.539989] usb 1-3: Manufacturer: CN0C7H5D724870BG05RXA00
[    3.539997] usb 1-3: SerialNumber: 0x00
[    3.617177] [drm] initialized overlay support
[    3.961123] usb 4-1: new full speed USB device using uhci_hcd and address 2
[    4.045316] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    4.045403] Console: switching to colour dummy device 80x25
[    4.047357] [drm] Big FIFO is enabled
[    4.104374] usb 4-1: New USB device found, idVendor=0eef, idProduct=725e
[    4.104385] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.104393] usb 4-1: Product: USB TouchController
[    4.104400] usb 4-1: Manufacturer: eGalax Inc.
[    4.113571] [drm] Big FIFO is enabled
[    4.113589] [drm] Big FIFO is enabled
[    4.118108] input: eGalax Inc. USB TouchController as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input6
[    4.118897] generic-usb 0003:0EEF:725E.0001: input,hiddev96,hidraw0: USB HID v2.10 Pointer [eGalax Inc. USB TouchController] on usb-0000:00:1d.2-1/input0
[    4.271999] [drm] Big FIFO is enabled
[    4.324328] usb 4-2: new full speed USB device using uhci_hcd and address 3
[    4.463390] usb 4-2: New USB device found, idVendor=0cf3, idProduct=3002
[    4.463404] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.582702] Console: switching to colour frame buffer device 167x44
[    4.724457] fb0: inteldrmfb frame buffer device
[    4.724463] registered panic notifier
[    4.731159] acpi device:26: registered as cooling_device5
[    4.731995] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    4.732142] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[    4.732189] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.840911] PM: Marking nosave pages: 0000000000002000 - 0000000000010000
[    4.840922] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[    4.840931] PM: Basic memory bitmaps created
[    4.904717] PM: Basic memory bitmaps freed
[    4.904730] video LNXVIDEO:00: Restoring backlight state
[    4.939378] PM: Starting manual resume from disk
[    4.939387] PM: Resume from partition 8:6
[    4.939392] PM: Checking hibernation image.
[    4.939671] PM: Error -22 checking image file
[    4.939676] PM: Resume from disk failed.
[    5.129996] EXT4-fs (sda7): mounted filesystem with ordered data mode
[    6.542603] preloadtrace: systemtap: 1.1/0.147, base: f81c2000, memory: 24data/38text/25ctx/13net/285alloc kb, probes: 34
[    7.622749] udev: starting version 157
[    7.896781] ACPI: AC Adapter [ACAD] (off-line)
[    7.898208] ACPI: WMI: Mapper loaded
[    7.957498] ------------[ cut here ]------------
[    7.957526] WARNING: at /usr/src/packages/BUILD/kernel-desktop-2.6.34.7/linux-2.6.34/fs/proc/generic.c:598 proc_register+0xf0/0x1d0()
[    7.957539] Hardware name: Inspiron 1090
[    7.957547] proc_dir_entry 'ac_adapter/ACAD' already registered
[    7.957554] Modules linked in: ac(+) wmi soundcore snd_page_alloc rfkill preloadtrace ext4 jbd2 crc16 i915 drm_kms_helper drm i2c_algo_bit video button intel_agp fan processor thermal thermal_sys
[    7.957613] Pid: 493, comm: modprobe Not tainted 2.6.34.7-0.7-desktop #1
[    7.957621] Call Trace:
[    7.957659]  [<c02065c3>] try_stack_unwind+0x173/0x190
[    7.957687]  [<c02051cf>] dump_trace+0x3f/0xe0
[    7.957712]  [<c020662b>] show_trace_log_lvl+0x4b/0x60
[    7.957733]  [<c0206658>] show_trace+0x18/0x20
[    7.957756]  [<c064e4f3>] dump_stack+0x6d/0x72
[    7.957780]  [<c02443ae>] warn_slowpath_common+0x6e/0xb0
[    7.957802]  [<c024443b>] warn_slowpath_fmt+0x2b/0x30
[    7.957824]  [<c0348580>] proc_register+0xf0/0x1d0
[    7.957849]  [<c03489f3>] proc_mkdir_mode+0x33/0x50
[    7.957874]  [<f91492af>] acpi_ac_add+0xdc/0x1af [ac]
[    7.957904]  [<c044321e>] acpi_device_probe+0x37/0x164
[    7.957929]  [<c04a25cd>] really_probe+0x5d/0x200
[    7.957951]  [<c04a293e>] driver_probe_device+0x3e/0xa0
[    7.957972]  [<c04a2a19>] __driver_attach+0x79/0x80
[    7.957996]  [<c04a173b>] bus_for_each_dev+0x4b/0x70
[    7.958018]  [<c04a2446>] driver_attach+0x16/0x20
[    7.958038]  [<c04a2067>] bus_add_driver+0x1c7/0x330
[    7.958063]  [<c04a2bff>] driver_register+0x5f/0x100
[    7.958088]  [<f914c029>] acpi_ac_init+0x29/0x40 [ac]
[    7.958111]  [<c020121f>] do_one_initcall+0x2f/0x190
[    7.958136]  [<c027a8e1>] sys_init_module+0xb1/0x220
[    7.958159]  [<c020324c>] sysenter_do_call+0x12/0x22
[    7.958188]  [<ffffe424>] 0xffffe424
[    7.958198] ---[ end trace e5ae30e6dfd04abf ]---
[    7.958326] ------------[ cut here ]------------
[    7.958346] WARNING: at /usr/src/packages/BUILD/kernel-desktop-2.6.34.7/linux-2.6.34/fs/sysfs/dir.c:451 sysfs_add_one+0xb2/0x130()
[    7.958358] Hardware name: Inspiron 1090
[    7.958366] sysfs: cannot create duplicate filename '/class/power_supply/ACAD'
[    7.958373] Modules linked in: ac(+) wmi soundcore snd_page_alloc rfkill preloadtrace ext4 jbd2 crc16 i915 drm_kms_helper drm i2c_algo_bit video button intel_agp fan processor thermal thermal_sys
[    7.958426] Pid: 493, comm: modprobe Tainted: G        W  2.6.34.7-0.7-desktop #1
[    7.958436] Call Trace:
[    7.958462]  [<c02065c3>] try_stack_unwind+0x173/0x190
[    7.958487]  [<c02051cf>] dump_trace+0x3f/0xe0
[    7.958508]  [<c020662b>] show_trace_log_lvl+0x4b/0x60
[    7.958528]  [<c0206658>] show_trace+0x18/0x20
[    7.958547]  [<c064e4f3>] dump_stack+0x6d/0x72
[    7.958566]  [<c02443ae>] warn_slowpath_common+0x6e/0xb0
[    7.958584]  [<c024443b>] warn_slowpath_fmt+0x2b/0x30
[    7.958602]  [<c0356b12>] sysfs_add_one+0xb2/0x130
[    7.958623]  [<c0357137>] sysfs_do_create_link+0x97/0x140
[    7.958641]  [<c03571ef>] sysfs_create_link+0xf/0x20
[    7.958661]  [<c049e70e>] device_add_class_symlinks+0x5e/0xb0
[    7.958681]  [<c049f8a7>] device_add+0x1e7/0x3b0
[    7.958701]  [<c049fb49>] device_create_vargs+0xc9/0x150
[    7.958720]  [<c049fbfb>] device_create+0x2b/0x30
[    7.958737]  [<c0539b92>] power_supply_register+0x32/0xa0
[    7.958759]  [<f9149355>] acpi_ac_add+0x182/0x1af [ac]
[    7.958782]  [<c044321e>] acpi_device_probe+0x37/0x164
[    7.958800]  [<c04a25cd>] really_probe+0x5d/0x200
[    7.958818]  [<c04a293e>] driver_probe_device+0x3e/0xa0
[    7.958836]  [<c04a2a19>] __driver_attach+0x79/0x80
[    7.958854]  [<c04a173b>] bus_for_each_dev+0x4b/0x70
[    7.958872]  [<c04a2446>] driver_attach+0x16/0x20
[    7.958888]  [<c04a2067>] bus_add_driver+0x1c7/0x330
[    7.958908]  [<c04a2bff>] driver_register+0x5f/0x100
[    7.958928]  [<f914c029>] acpi_ac_init+0x29/0x40 [ac]
[    7.958945]  [<c020121f>] do_one_initcall+0x2f/0x190
[    7.958964]  [<c027a8e1>] sys_init_module+0xb1/0x220
[    7.958983]  [<c020324c>] sysenter_do_call+0x12/0x22
[    7.959005]  [<ffffe424>] 0xffffe424
[    7.959013] ---[ end trace e5ae30e6dfd04ac0 ]---
[    7.959097] ACPI: AC Adapter [ACAD] (off-line)
[    8.123075] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    8.188523] cfg80211: Calling CRDA to update world regulatory domain
[    8.192171] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    8.214209] cfg80211: World regulatory domain updated:
[    8.214222]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.214234]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.214244]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.214277]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.214287]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.214297]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.222214] Bluetooth: Core ver 2.15
[    8.222466] NET: Registered protocol family 31
[    8.222473] Bluetooth: HCI device and connection manager initialized
[    8.222482] Bluetooth: HCI socket layer initialized
[    8.234236] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    8.237964] usbcore: registered new interface driver btusb
[    8.244900] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.254229] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    8.258363] input: Dell WMI hotkeys as /devices/virtual/input/input9
[    9.055963] ACPI: Battery Slot [BAT1] (battery present)
[    9.129446] Linux video capture interface: v2.00
[    9.418764] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    9.418794] ath9k 0000:02:00.0: setting latency timer to 64
[    9.440885] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0bda:58f4)
[    9.459818] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input10
[    9.460326] usbcore: registered new interface driver uvcvideo
[    9.460334] USB Video Class driver (v0.1.0)
[    9.470853] ath: EEPROM regdomain: 0x60
[    9.470859] ath: EEPROM indicates we should expect a direct regpair map
[    9.470867] ath: Country alpha2 being used: 00
[    9.470871] ath: Regpair used: 0x60
[    9.524765] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.524869]   alloc irq_desc for 30 on node -1
[    9.524876]   alloc kstat_irqs on node -1
[    9.524906] HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X
[    9.524975] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.246518] phy0: Selected rate control algorithm 'ath9k_rate_control'
[   10.247871] Registered led device: ath9k-phy0::radio
[   10.247940] Registered led device: ath9k-phy0::assoc
[   10.248023] Registered led device: ath9k-phy0::tx
[   10.248088] Registered led device: ath9k-phy0::rx
[   10.248112] phy0: Atheros AR9285 Rev:2 mem=0xf9500000, irq=17
[   10.649076] Adding 3147772k swap on /dev/sda6.  Priority:-1 extents:1 across:3147772k 
[   11.297418] device-mapper: uevent: version 1.0.3
[   11.297996] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[   12.080566] loop: module loaded
[   12.439991] EXT4-fs (sda5): mounted filesystem with ordered data mode
[   12.495872] EXT4-fs (sda8): mounted filesystem with ordered data mode
[   12.546104] fuse init (API version 7.13)
[   14.433110] type=1505 audit(1296469561.263:2): operation="profile_load" pid=1274 name=/bin/ping
[   14.572480] type=1505 audit(1296469561.403:3): operation="profile_load" pid=1275 name=/sbin/klogd
[   14.842248] type=1505 audit(1296469561.673:4): operation="profile_load" pid=1276 name=/sbin/syslog-ng
[   15.108261] type=1505 audit(1296469561.939:5): operation="profile_load" pid=1277 name=/sbin/syslogd
[   15.395614] type=1505 audit(1296469562.226:6): operation="profile_load" pid=1278 name=/usr/sbin/avahi-daemon
[   15.635895] type=1505 audit(1296469562.466:7): operation="profile_load" pid=1279 name=/usr/sbin/identd
[   15.899757] type=1505 audit(1296469562.730:8): operation="profile_load" pid=1280 name=/usr/sbin/mdnsd
[   16.215147] type=1505 audit(1296469563.045:9): operation="profile_load" pid=1281 name=/usr/sbin/nscd
[   16.634442] type=1505 audit(1296469563.465:10): operation="profile_load" pid=1282 name=/usr/sbin/ntpd
[   16.871374] type=1505 audit(1296469563.702:11): operation="profile_load" pid=1283 name=/usr/sbin/traceroute
[   18.430432] powernow: This module only works with AMD K7 CPUs
[   21.417427] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   21.827225] ip_tables: (C) 2000-2006 Netfilter Core Team
[   21.866301] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   23.905038] [drm] Big FIFO is enabled
[   26.343211] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[   27.058930] Bluetooth: L2CAP ver 2.14
[   27.058939] Bluetooth: L2CAP socket layer initialized
[   27.111369] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   27.111379] Bluetooth: BNEP filters: protocol multicast
[   27.268094] Bridge firewalling registered
[   27.348849] Bluetooth: SCO (Voice Link) ver 0.6
[   27.348859] Bluetooth: SCO socket layer initialized
[   27.393409] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   27.495843] NET: Registered protocol family 17
[   28.532050] Bluetooth: RFCOMM TTY layer initialized
[   28.532067] Bluetooth: RFCOMM socket layer initialized
[   28.532075] Bluetooth: RFCOMM ver 1.11
[   48.351217] CE: hpet increased min_delta_ns to 11250 nsec
[   58.737151] bootsplash: status on console 0 changed to on
[   90.049237] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[  120.748327] wlan0: authenticate with bc:05:43:16:67:c1 (try 1)
[  120.751306] wlan0: authenticated
[  120.751360] wlan0: associate with bc:05:43:16:67:c1 (try 1)
[  120.771310] wlan0: RX AssocResp from bc:05:43:16:67:c1 (capab=0x431 status=0 aid=1)
[  120.771326] wlan0: associated
[  120.779462] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  120.862959] padlock: VIA PadLock not detected.
[  123.181208] martian source 255.255.255.255 from 192.168.178.1, on dev wlan0
[  123.181221] ll header: ff:ff:ff:ff:ff:ff:bc:05:43:3f:61:e6:08:00
[  130.295433] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=88:25:2c:c3:dc:08:bc:05:43:3f:61:e6:08:00 SRC=192.168.178.1 DST=192.168.178.36 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=1139 DF PROTO=TCP SPT=3939 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A031A705D0000000001030303) 
[  131.220054] wlan0: no IPv6 routers present
[  133.288703] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=88:25:2c:c3:dc:08:bc:05:43:3f:61:e6:08:00 SRC=192.168.178.1 DST=192.168.178.36 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=1140 DF PROTO=TCP SPT=3939 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A031A71890000000001030303) 
[  134.242944] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=88:25:2c:c3:dc:08:bc:05:43:3f:61:e6:08:00 SRC=192.168.178.1 DST=192.168.178.36 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=42864 DF PROTO=TCP SPT=2016 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A031A71E80000000001030303) 
[  134.345018] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=88:25:2c:c3:dc:08:bc:05:43:3f:61:e6:08:00 SRC=192.168.178.1 DST=192.168.178.36 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=16095 DF PROTO=TCP SPT=1553 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A031A71F20000000001030303) 
[  134.408119] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=88:25:2c:c3:dc:08:bc:05:43:3f:61:e6:08:00 SRC=192.168.178.1 DST=192.168.178.36 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=49198 DF PROTO=TCP SPT=3965 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A031A71F80000000001030303) 
[  154.289995] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=88:25:2c:c3:dc:08:bc:05:43:3f:61:e6:08:00 SRC=192.168.178.1 DST=192.168.178.36 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=48448 DF PROTO=TCP SPT=4264 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A031A79BD0000000001030303) 
[  184.017410] wlan0: deauthenticating from bc:05:43:16:67:c1 by local choice (reason=3)
[  184.038673] cfg80211: Calling CRDA to update world regulatory domain
[  184.063874] cfg80211: World regulatory domain updated:
[  184.063886]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  184.063898]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  184.063908]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  184.063917]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  184.063927]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  184.063937]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  184.510169] dell-wmi: Unknown key 0 pressed
[  184.704203] usb 4-2: USB disconnect, address 3
[  184.704895] btusb_intr_complete: hci0 urb f54679c0 failed to resubmit (19)
[  184.704933] btusb_bulk_complete: hci0 urb f54676c0 failed to resubmit (19)
[  184.705886] btusb_bulk_complete: hci0 urb f5467840 failed to resubmit (19)
[  184.706096] btusb_send_frame: hci0 urb f542bb40 submission failed
[  212.878841] dell-wmi: Unknown key 0 pressed
[  215.410346] usb 4-2: new full speed USB device using uhci_hcd and address 4
[  215.549375] usb 4-2: New USB device found, idVendor=0cf3, idProduct=3002
[  215.549389] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  220.779159] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  223.482789] wlan0: authenticate with bc:05:43:16:67:c1 (try 1)
[  223.486152] wlan0: authenticated
[  223.486206] wlan0: associate with bc:05:43:16:67:c1 (try 1)
[  223.490071] wlan0: RX AssocResp from bc:05:43:16:67:c1 (capab=0x431 status=0 aid=1)
[  223.490081] wlan0: associated
[  223.498159] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  226.182991] martian source 255.255.255.255 from 192.168.178.1, on dev wlan0
[  226.183002] ll header: ff:ff:ff:ff:ff:ff:bc:05:43:3f:61:e6:08:00
[  233.746340] wlan0: no IPv6 routers present
[  250.572196] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.178.36 DST=80.237.132.167 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52825 DF PROTO=TCP SPT=55449 DPT=80 WINDOW=452 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080AFFFF3EEC1837F916) 
[  250.681212] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=88:25:2c:c3:dc:08:bc:05:43:3f:61:e6:08:00 SRC=192.168.178.1 DST=192.168.178.36 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=34692 DF PROTO=TCP SPT=4378 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A031A9F640000000001030303) 
[  250.831199] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.178.36 DST=80.237.132.167 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52826 DF PROTO=TCP SPT=55449 DPT=80 WINDOW=452 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080AFFFF3FEF1837F916) 
[  251.349194] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.178.36 DST=80.237.132.167 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52827 DF PROTO=TCP SPT=55449 DPT=80 WINDOW=452 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080AFFFF41F51837F916) 
[  252.385457] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.178.36 DST=80.237.132.167 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52828 DF PROTO=TCP SPT=55449 DPT=80 WINDOW=452 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080AFFFF46011837F916) 
[  254.457194] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.178.36 DST=80.237.132.167 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52829 DF PROTO=TCP SPT=55449 DPT=80 WINDOW=452 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080AFFFF4E191837F916) 
[  276.175330] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.178.36 DST=62.53.230.177 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=18437 DF PROTO=TCP SPT=55169 DPT=80 WINDOW=272 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080AFFFFA2EFDB9D6448) 
[  292.820508] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=88:25:2c:c3:dc:08:bc:05:43:3f:61:e6:08:00 SRC=192.168.178.1 DST=192.168.178.36 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=1373 DF PROTO=TCP SPT=3445 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A031AAFDA0000000001030303) 
[  293.199092] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.178.36 DST=62.53.230.177 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=18438 DF PROTO=TCP SPT=55169 DPT=80 WINDOW=272 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080AFFFFE56FDB9D6448) 
[  316.617182] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.178.36 DST=80.237.132.167 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52833 DF PROTO=TCP SPT=55449 DPT=80 WINDOW=452 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A000040E91837F916) 
[  350.083066] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=88:25:2c:c3:dc:08:bc:05:43:3f:61:e6:08:00 SRC=192.168.178.1 DST=192.168.178.36 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=41860 DF PROTO=TCP SPT=2881 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A031AC6380000000001030303) 
[  353.081182] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=88:25:2c:c3:dc:08:bc:05:43:3f:61:e6:08:00 SRC=192.168.178.1 DST=192.168.178.36 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=41861 DF PROTO=TCP SPT=2881 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A031AC7640000000001030303) 
[  383.213614] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=88:25:2c:c3:dc:08:bc:05:43:3f:61:e6:08:00 SRC=192.168.178.1 DST=192.168.178.36 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=8417 DF PROTO=TCP SPT=1894 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A031AD3290000000001030303) 
[  392.212565] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=88:25:2c:c3:dc:08:bc:05:43:3f:61:e6:08:00 SRC=192.168.178.1 DST=192.168.178.36 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=8419 DF PROTO=TCP SPT=1894 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A031AD6AD0000000001030303) 
[  416.357091] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=88:25:2c:c3:dc:08:bc:05:43:3f:61:e6:08:00 SRC=192.168.178.1 DST=192.168.178.36 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=59339 DF PROTO=TCP SPT=1530 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A031AE01B0000000001030303) 
[  445.782833] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=88:25:2c:c3:dc:08:bc:05:43:3f:61:e6:08:00 SRC=192.168.178.1 DST=192.168.178.36 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=43982 DF PROTO=TCP SPT=3918 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A031AEB9A0000000001030303) 
[  454.782273] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=88:25:2c:c3:dc:
 
nur zur Info. Nachdem zweimal der Sound wieder nicht ging, habe ich nichts weiter getan, als windows gestartet, danach dann wieder suse, dann war wieder alles ok.

Mit dem akkustischen Signal meinte ich die Begrüßungsmelodie in Suse, kein BIOS-Sound.
 
rbest schrieb:
[ 7.957498] ------------[ cut here ]------------
[ 7.957526] WARNING: at /usr/src/packages/BUILD/kernel-desktop-2.6.34.7/linux-2.6.34/fs/proc/generic.c:598 proc_register+0xf0/0x1d0()
[ 7.957539] Hardware name: Inspiron 1090
[ 7.957547] proc_dir_entry 'ac_adapter/ACAD' already registered
[ 7.957554] Modules linked in: ac(+) wmi soundcore snd_page_alloc rfkill preloadtrace ext4 jbd2 crc16 i915 drm_kms_helper drm i2c_algo_bit video button intel_agp fan processor thermal thermal_sys
[ 7.957613] Pid: 493, comm: modprobe Not tainted 2.6.34.7-0.7-desktop #1
[ 7.957621] Call Trace:
[ 7.957659] [<c02065c3>] try_stack_unwind+0x173/0x190
[ 7.957687] [<c02051cf>] dump_trace+0x3f/0xe0
[ 7.957712] [<c020662b>] show_trace_log_lvl+0x4b/0x60
[ 7.957733] [<c0206658>] show_trace+0x18/0x20
[ 7.957756] [<c064e4f3>] dump_stack+0x6d/0x72
[ 7.957780] [<c02443ae>] warn_slowpath_common+0x6e/0xb0
[ 7.957802] [<c024443b>] warn_slowpath_fmt+0x2b/0x30
[ 7.957824] [<c0348580>] proc_register+0xf0/0x1d0
[ 7.957849] [<c03489f3>] proc_mkdir_mode+0x33/0x50
[ 7.957874] [<f91492af>] acpi_ac_add+0xdc/0x1af [ac]
[ 7.957904] [<c044321e>] acpi_device_probe+0x37/0x164
[ 7.957929] [<c04a25cd>] really_probe+0x5d/0x200
[ 7.957951] [<c04a293e>] driver_probe_device+0x3e/0xa0
[ 7.957972] [<c04a2a19>] __driver_attach+0x79/0x80
[ 7.957996] [<c04a173b>] bus_for_each_dev+0x4b/0x70
[ 7.958018] [<c04a2446>] driver_attach+0x16/0x20
[ 7.958038] [<c04a2067>] bus_add_driver+0x1c7/0x330
[ 7.958063] [<c04a2bff>] driver_register+0x5f/0x100
[ 7.958088] [<f914c029>] acpi_ac_init+0x29/0x40 [ac]
[ 7.958111] [<c020121f>] do_one_initcall+0x2f/0x190
[ 7.958136] [<c027a8e1>] sys_init_module+0xb1/0x220
[ 7.958159] [<c020324c>] sysenter_do_call+0x12/0x22
[ 7.958188] [<ffffe424>] 0xffffe424
[ 7.958198] ---[ end trace e5ae30e6dfd04abf ]---
[ 7.958326] ------------[ cut here ]------------
[ 7.958346] WARNING: at /usr/src/packages/BUILD/kernel-desktop-2.6.34.7/linux-2.6.34/fs/sysfs/dir.c:451 sysfs_add_one+0xb2/0x130()
[ 7.958358] Hardware name: Inspiron 1090
[ 7.958366] sysfs: cannot create duplicate filename '/class/power_supply/ACAD'
[ 7.958373] Modules linked in: ac(+) wmi soundcore snd_page_alloc rfkill preloadtrace ext4 jbd2 crc16 i915 drm_kms_helper drm i2c_algo_bit video button intel_agp fan processor thermal thermal_sys
[ 7.958426] Pid: 493, comm: modprobe Tainted: G W 2.6.34.7-0.7-desktop #1
[ 7.958436] Call Trace:
[ 7.958462] [<c02065c3>] try_stack_unwind+0x173/0x190
[ 7.958487] [<c02051cf>] dump_trace+0x3f/0xe0
[ 7.958508] [<c020662b>] show_trace_log_lvl+0x4b/0x60
[ 7.958528] [<c0206658>] show_trace+0x18/0x20
[ 7.958547] [<c064e4f3>] dump_stack+0x6d/0x72
[ 7.958566] [<c02443ae>] warn_slowpath_common+0x6e/0xb0
[ 7.958584] [<c024443b>] warn_slowpath_fmt+0x2b/0x30
[ 7.958602] [<c0356b12>] sysfs_add_one+0xb2/0x130
[ 7.958623] [<c0357137>] sysfs_do_create_link+0x97/0x140
[ 7.958641] [<c03571ef>] sysfs_create_link+0xf/0x20
[ 7.958661] [<c049e70e>] device_add_class_symlinks+0x5e/0xb0
[ 7.958681] [<c049f8a7>] device_add+0x1e7/0x3b0
[ 7.958701] [<c049fb49>] device_create_vargs+0xc9/0x150
[ 7.958720] [<c049fbfb>] device_create+0x2b/0x30
[ 7.958737] [<c0539b92>] power_supply_register+0x32/0xa0
[ 7.958759] [<f9149355>] acpi_ac_add+0x182/0x1af [ac]
[ 7.958782] [<c044321e>] acpi_device_probe+0x37/0x164
[ 7.958800] [<c04a25cd>] really_probe+0x5d/0x200
[ 7.958818] [<c04a293e>] driver_probe_device+0x3e/0xa0
[ 7.958836] [<c04a2a19>] __driver_attach+0x79/0x80
[ 7.958854] [<c04a173b>] bus_for_each_dev+0x4b/0x70
[ 7.958872] [<c04a2446>] driver_attach+0x16/0x20
[ 7.958888] [<c04a2067>] bus_add_driver+0x1c7/0x330
[ 7.958908] [<c04a2bff>] driver_register+0x5f/0x100
[ 7.958928] [<f914c029>] acpi_ac_init+0x29/0x40 [ac]
[ 7.958945] [<c020121f>] do_one_initcall+0x2f/0x190
[ 7.958964] [<c027a8e1>] sys_init_module+0xb1/0x220
[ 7.958983] [<c020324c>] sysenter_do_call+0x12/0x22
[ 7.959005] [<ffffe424>] 0xffffe424
[ 7.959013] ---[ end trace e5ae30e6dfd04ac0 ]---
Zum Vergrößern anklicken....

Das ist die Ursache des Problems und du solltest einen Bug- Report erstellen.

Boote mal mit der Bootoption
Code: 
pci=noacpi
und poste dann mal, ob sich etwas geändert hat.
 
Bin ich jetzt endlich dazu gekommen. Folgenden Teil hast du gemeint?
Code: 
[    7.629664] ------------[ cut here ]------------
[    7.629701] WARNING: at /usr/src/packages/BUILD/kernel-desktop-2.6.34.7/linux-2.6.34/fs/proc/generic.c:598 proc_register+0xf0/0x1d0()
[    7.629717] Hardware name: Inspiron 1090
[    7.629725] proc_dir_entry 'ac_adapter/ACAD' already registered
[    7.629734] Modules linked in: wmi ac(+) rfkill snd soundcore snd_page_alloc preloadtrace ext4 jbd2 crc16 i915 drm_kms_helper drm i2c_algo_bit intel_agp video button fan processor thermal thermal_sys
[    7.629818] Pid: 493, comm: modprobe Not tainted 2.6.34.7-0.7-desktop #1
[    7.629828] Call Trace:
[    7.629869]  [<c02065c3>] try_stack_unwind+0x173/0x190
[    7.629899]  [<c02051cf>] dump_trace+0x3f/0xe0
[    7.629923]  [<c020662b>] show_trace_log_lvl+0x4b/0x60
[    7.629946]  [<c0206658>] show_trace+0x18/0x20
[    7.629970]  [<c064e4f3>] dump_stack+0x6d/0x72
[    7.629993]  [<c02443ae>] warn_slowpath_common+0x6e/0xb0
[    7.630016]  [<c024443b>] warn_slowpath_fmt+0x2b/0x30
[    7.630039]  [<c0348580>] proc_register+0xf0/0x1d0
[    7.630065]  [<c03489f3>] proc_mkdir_mode+0x33/0x50
[    7.630094]  [<f91462af>] acpi_ac_add+0xdc/0x1af [ac]
[    7.630124]  [<c044321e>] acpi_device_probe+0x37/0x164
[    7.630152]  [<c04a25cd>] really_probe+0x5d/0x200
[    7.630176]  [<c04a293e>] driver_probe_device+0x3e/0xa0
[    7.630198]  [<c04a2a19>] __driver_attach+0x79/0x80
[    7.630224]  [<c04a173b>] bus_for_each_dev+0x4b/0x70
[    7.630247]  [<c04a2446>] driver_attach+0x16/0x20
[    7.630269]  [<c04a2067>] bus_add_driver+0x1c7/0x330
[    7.630293]  [<c04a2bff>] driver_register+0x5f/0x100
[    7.630320]  [<f9149029>] acpi_ac_init+0x29/0x40 [ac]
[    7.630342]  [<c020121f>] do_one_initcall+0x2f/0x190
[    7.630368]  [<c027a8e1>] sys_init_module+0xb1/0x220
[    7.630428]  [<c020324c>] sysenter_do_call+0x12/0x22
[    7.630460]  [<ffffe424>] 0xffffe424
[    7.630471] ---[ end trace 5385707a2cb1d966 ]---
[    7.630556] ------------[ cut here ]------------
[    7.630575] WARNING: at /usr/src/packages/BUILD/kernel-desktop-2.6.34.7/linux-2.6.34/fs/sysfs/dir.c:451 sysfs_add_one+0xb2/0x130()
[    7.630587] Hardware name: Inspiron 1090
[    7.630595] sysfs: cannot create duplicate filename '/class/power_supply/ACAD'
[    7.630603] Modules linked in: wmi ac(+) rfkill snd soundcore snd_page_alloc preloadtrace ext4 jbd2 crc16 i915 drm_kms_helper drm i2c_algo_bit intel_agp video button fan processor thermal thermal_sys
[    7.630669] Pid: 493, comm: modprobe Tainted: G        W  2.6.34.7-0.7-desktop #1
[    7.630678] Call Trace:
[    7.630700]  [<c02065c3>] try_stack_unwind+0x173/0x190
[    7.630722]  [<c02051cf>] dump_trace+0x3f/0xe0
[    7.630742]  [<c020662b>] show_trace_log_lvl+0x4b/0x60
[    7.630761]  [<c0206658>] show_trace+0x18/0x20
[    7.630781]  [<c064e4f3>] dump_stack+0x6d/0x72
[    7.630801]  [<c02443ae>] warn_slowpath_common+0x6e/0xb0
[    7.630820]  [<c024443b>] warn_slowpath_fmt+0x2b/0x30
[    7.630839]  [<c0356b12>] sysfs_add_one+0xb2/0x130
[    7.630861]  [<c0357137>] sysfs_do_create_link+0x97/0x140
[    7.630881]  [<c03571ef>] sysfs_create_link+0xf/0x20
[    7.630902]  [<c049e70e>] device_add_class_symlinks+0x5e/0xb0
[    7.630924]  [<c049f8a7>] device_add+0x1e7/0x3b0
[    7.630946]  [<c049fb49>] device_create_vargs+0xc9/0x150
[    7.630967]  [<c049fbfb>] device_create+0x2b/0x30
[    7.630987]  [<c0539b92>] power_supply_register+0x32/0xa0
[    7.631012]  [<f9146355>] acpi_ac_add+0x182/0x1af [ac]
[    7.631038]  [<c044321e>] acpi_device_probe+0x37/0x164
[    7.631058]  [<c04a25cd>] really_probe+0x5d/0x200
[    7.631078]  [<c04a293e>] driver_probe_device+0x3e/0xa0
[    7.631097]  [<c04a2a19>] __driver_attach+0x79/0x80
[    7.631118]  [<c04a173b>] bus_for_each_dev+0x4b/0x70
[    7.631138]  [<c04a2446>] driver_attach+0x16/0x20
[    7.631156]  [<c04a2067>] bus_add_driver+0x1c7/0x330
[    7.631177]  [<c04a2bff>] driver_register+0x5f/0x100
[    7.631200]  [<f9149029>] acpi_ac_init+0x29/0x40 [ac]
[    7.631219]  [<c020121f>] do_one_initcall+0x2f/0x190
[    7.631239]  [<c027a8e1>] sys_init_module+0xb1/0x220
[    7.631260]  [<c020324c>] sysenter_do_call+0x12/0x22
[    7.631287]  [<ffffe424>] 0xffffe424
[    7.631296] ---[ end trace 5385707a2cb1d967 ]---
Das war die Start-Einstellung
Code: 
    kernel /vmlinuz-2.6.34.7-0.7-desktop root=/dev/disk/by-id/ata-Hitachi_HTS723232A7A364_E3834063G3R67A-part7 resume=/dev/disk/by-id/ata-Hitachi_HTS723232A7A364_E3834063G3R67A-part6 pci=noacpi splash=silent quiet showopts vga=0x317
Was mir gerade noch einfällt. Momentan funzt das Soundsystem wieder nicht. Wenn ich jetzt runterfahr, windows starte und dann wieder Suse, dann wirds wieder gehen ohne was zu machen. - Genau. Hab ich jetzt gemacht, sound geht wieder. Ich sollte mich als Prophet betätigen :D
 
Genau den Kernel Trace meinte ich. Den Kernel hast du aber nicht mal selber kompiliert oder? Als nächstes kannst du es mal mit der Bootoption
Code: 
pci=noioapicreroute
.

Wenn es dann immer noch auftritt, dann könntest du noch ACPI ausschalten. Allerdings hast du dann kein Powermanagement etc. mehr.
 
ok, auch das habe ich. Ne selber hab ich nix kompiliert.
[ 8.304891] ------------[ cut here ]------------
[ 8.304914] WARNING: at /usr/src/packages/BUILD/kernel-desktop-2.6.34.7/linux-2.6.34/fs/proc/generic.c:598 proc_register+0xf0/0x1d0()
[ 8.304924] Hardware name: Inspiron 1090
[ 8.304930] proc_dir_entry 'ac_adapter/ACAD' already registered
[ 8.304936] Modules linked in: bluetooth i2c_i801 v4l1_compat sg pcspkr battery soundcore ac(+) wmi snd_page_alloc joydev cfg80211 rfkill preloadtrace ext4 jbd2 crc16 i915 drm_kms_helper drm i2c_algo_bit video button intel_agp fan processor thermal thermal_sys
[ 8.305002] Pid: 504, comm: modprobe Not tainted 2.6.34.7-0.7-desktop #1
[ 8.305009] Call Trace:
[ 8.305036] [<c02065c3>] try_stack_unwind+0x173/0x190
[ 8.305055] [<c02051cf>] dump_trace+0x3f/0xe0
[ 8.305071] [<c020662b>] show_trace_log_lvl+0x4b/0x60
[ 8.305084] [<c0206658>] show_trace+0x18/0x20
[ 8.305100] [<c064e4f3>] dump_stack+0x6d/0x72
[ 8.305115] [<c02443ae>] warn_slowpath_common+0x6e/0xb0
[ 8.305157] [<c024443b>] warn_slowpath_fmt+0x2b/0x30
[ 8.305172] [<c0348580>] proc_register+0xf0/0x1d0
[ 8.305187] [<c03489f3>] proc_mkdir_mode+0x33/0x50
[ 8.305205] [<f91ad2af>] acpi_ac_add+0xdc/0x1af [ac]
[ 8.305224] [<c044321e>] acpi_device_probe+0x37/0x164
[ 8.305241] [<c04a25cd>] really_probe+0x5d/0x200
[ 8.305255] [<c04a293e>] driver_probe_device+0x3e/0xa0
[ 8.305270] [<c04a2a19>] __driver_attach+0x79/0x80
[ 8.305286] [<c04a173b>] bus_for_each_dev+0x4b/0x70
[ 8.305300] [<c04a2446>] driver_attach+0x16/0x20
[ 8.305313] [<c04a2067>] bus_add_driver+0x1c7/0x330
[ 8.305330] [<c04a2bff>] driver_register+0x5f/0x100
[ 8.305347] [<f91b0029>] acpi_ac_init+0x29/0x40 [ac]
[ 8.305361] [<c020121f>] do_one_initcall+0x2f/0x190
[ 8.305377] [<c027a8e1>] sys_init_module+0xb1/0x220
[ 8.305392] [<c020324c>] sysenter_do_call+0x12/0x22
[ 8.305412] [<ffffe424>] 0xffffe424
[ 8.305419] ---[ end trace 0774887e37df3d36 ]---
[ 8.305474] ------------[ cut here ]------------
[ 8.305487] WARNING: at /usr/src/packages/BUILD/kernel-desktop-2.6.34.7/linux-2.6.34/fs/sysfs/dir.c:451 sysfs_add_one+0xb2/0x130()
[ 8.305496] Hardware name: Inspiron 1090
[ 8.305501] sysfs: cannot create duplicate filename '/class/power_supply/ACAD'
[ 8.305507] Modules linked in: bluetooth i2c_i801 v4l1_compat sg pcspkr battery soundcore ac(+) wmi snd_page_alloc joydev cfg80211 rfkill preloadtrace ext4 jbd2 crc16 i915 drm_kms_helper drm i2c_algo_bit video button intel_agp fan processor thermal thermal_sys
[ 8.305566] Pid: 504, comm: modprobe Tainted: G W 2.6.34.7-0.7-desktop #1
[ 8.305573] Call Trace:
[ 8.305588] [<c02065c3>] try_stack_unwind+0x173/0x190
[ 8.305604] [<c02051cf>] dump_trace+0x3f/0xe0
[ 8.305618] [<c020662b>] show_trace_log_lvl+0x4b/0x60
[ 8.305632] [<c0206658>] show_trace+0x18/0x20
[ 8.305647] [<c064e4f3>] dump_stack+0x6d/0x72
[ 8.305660] [<c02443ae>] warn_slowpath_common+0x6e/0xb0
[ 8.305673] [<c024443b>] warn_slowpath_fmt+0x2b/0x30
[ 8.305687] [<c0356b12>] sysfs_add_one+0xb2/0x130
[ 8.305703] [<c0357137>] sysfs_do_create_link+0x97/0x140
[ 8.305717] [<c03571ef>] sysfs_create_link+0xf/0x20
[ 8.305732] [<c049e70e>] device_add_class_symlinks+0x5e/0xb0
[ 8.305747] [<c049f8a7>] device_add+0x1e7/0x3b0
[ 8.305763] [<c049fb49>] device_create_vargs+0xc9/0x150
[ 8.305778] [<c049fbfb>] device_create+0x2b/0x30
[ 8.305792] [<c0539b92>] power_supply_register+0x32/0xa0
[ 8.305810] [<f91ad355>] acpi_ac_add+0x182/0x1af [ac]
[ 8.305828] [<c044321e>] acpi_device_probe+0x37/0x164
[ 8.305842] [<c04a25cd>] really_probe+0x5d/0x200
[ 8.305856] [<c04a293e>] driver_probe_device+0x3e/0xa0
[ 8.305870] [<c04a2a19>] __driver_attach+0x79/0x80
[ 8.305885] [<c04a173b>] bus_for_each_dev+0x4b/0x70
[ 8.305900] [<c04a2446>] driver_attach+0x16/0x20
[ 8.305913] [<c04a2067>] bus_add_driver+0x1c7/0x330
[ 8.305928] [<c04a2bff>] driver_register+0x5f/0x100
[ 8.305945] [<f91b0029>] acpi_ac_init+0x29/0x40 [ac]
[ 8.305959] [<c020121f>] do_one_initcall+0x2f/0x190
[ 8.305974] [<c027a8e1>] sys_init_module+0xb1/0x220
[ 8.305988] [<c020324c>] sysenter_do_call+0x12/0x22
[ 8.306007] [<ffffe424>] 0xffffe424
[ 8.306013] ---[ end trace 0774887e37df3d37 ]---
Zum Vergrößern anklicken....
 
also, egal wie ichs mache, wenn ich das touchscreen touch, dann geht die Maus nicht mehr richtig.
 
spoensche schrieb:
Dann bleibt dir jetzt nur noch das Warten, bis der Bug gefixt ist.
Zum Vergrößern anklicken....

was denkst du, muß/soll ich den Bug melden? Per bugzilla? Und was müsste ich da mitliefern - die Auswertung, die ich als letztes hier reingestellt hab?
 
Natürlich solltest du den Bug melden. Im Bugreport beschreibst du dein Problem in Englisch und von der Ausgabe alles zwischen ---cut-herre-- und --end-trace--.

http://de.opensuse.org/Fehlerberichterstattung_HGF
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben