Hallo zusammen,
nachdem ich nun schon viel bei Euch gelernt habe, und es so nie nötig war, selbst was zu fragen stehe ich heute vor einer Herausforderung, mit der ich etwas überfordert bin.
kurz zum System
IBM Thinkpad T43p
openSuse 10.3 mit KDE
Zum Problem:
gestern abend hat mir das Tray-Icon meines openSuse Updater mit einem roten Ausrufezeichen signalisiert, dass es ein neues Sicherheitsupdate für mein System gibt. Es war genau Eines, nämlich das Kernelupdate. ich hab meine Arbeit beendet und die Installation angestoßen. Nach der erfolgreichen installation wurde ich aufgefordert, mein System neu zu starten, damit die Änderungen gültig werden, was ich auch sofort getan habe.
Die Karre ist also runtergefahren und dann wieder hoch - doch bereits beim hochfahren merkte ich, dass etwas nicht so ganz stimmt.
Sämtliche Meldungen die am Screen stehen waren in blau (!) und die Kiste hat nur weitergemacht, wenn ich eine beliebige Taste (ENTER) gedrückt habe.
Das System fährt schon hoch und ich kann dann auch arbeiten, aber immer wieder beim Bootvorgang scheint es eben auf eine Eingabe zu warten und erst wenn cih dann Enter drücke gehts weiter - das ist nervig und ich habe keinen Plan woran das liegt.
Meine neue Kernel-Version: 2.6.23.8-ccj59-default (ausgabe von uname -r)
unter /var/log/ gibt es eine Datei namens boot.log diese hat 0kb und das Erstellungsdatum spricht mit dem Installationsdatum überein - die boot.msg ist aktuell und sieht so aus Siehe unten
Kann mir bitte jemand weiterhelfen, damit ich mein System wieder normal starten kann, ohne auf der Entertaste einschlafen zu müssen?
Vielen Dank schonmal!
mit freundlichen Grüßen,
kugman
/var/log/boot.msg:
(die Zeilen mit den eckigen Klammern sind komplett blau... falls das was hilft)
nachdem ich nun schon viel bei Euch gelernt habe, und es so nie nötig war, selbst was zu fragen stehe ich heute vor einer Herausforderung, mit der ich etwas überfordert bin.
kurz zum System
IBM Thinkpad T43p
openSuse 10.3 mit KDE
Zum Problem:
gestern abend hat mir das Tray-Icon meines openSuse Updater mit einem roten Ausrufezeichen signalisiert, dass es ein neues Sicherheitsupdate für mein System gibt. Es war genau Eines, nämlich das Kernelupdate. ich hab meine Arbeit beendet und die Installation angestoßen. Nach der erfolgreichen installation wurde ich aufgefordert, mein System neu zu starten, damit die Änderungen gültig werden, was ich auch sofort getan habe.
Die Karre ist also runtergefahren und dann wieder hoch - doch bereits beim hochfahren merkte ich, dass etwas nicht so ganz stimmt.
Sämtliche Meldungen die am Screen stehen waren in blau (!) und die Kiste hat nur weitergemacht, wenn ich eine beliebige Taste (ENTER) gedrückt habe.
Das System fährt schon hoch und ich kann dann auch arbeiten, aber immer wieder beim Bootvorgang scheint es eben auf eine Eingabe zu warten und erst wenn cih dann Enter drücke gehts weiter - das ist nervig und ich habe keinen Plan woran das liegt.
Meine neue Kernel-Version: 2.6.23.8-ccj59-default (ausgabe von uname -r)
unter /var/log/ gibt es eine Datei namens boot.log diese hat 0kb und das Erstellungsdatum spricht mit dem Installationsdatum überein - die boot.msg ist aktuell und sieht so aus Siehe unten
Kann mir bitte jemand weiterhelfen, damit ich mein System wieder normal starten kann, ohne auf der Entertaste einschlafen zu müssen?
Vielen Dank schonmal!
mit freundlichen Grüßen,
kugman
/var/log/boot.msg:
(die Zeilen mit den eckigen Klammern sind komplett blau... falls das was hilft)
Code:
Inspecting /boot/System.map-2.6.23.8-ccj59-default
Loaded 26054 symbols from /boot/System.map-2.6.23.8-ccj59-default.
Symbols match kernel version 2.6.23.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<5>[ 0.000000] Linux version 2.6.23.8-ccj59-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/10/26 14:17:15 UTC
<6>[ 0.000000] BIOS-provided physical RAM map:
<4>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
<4>[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
<4>[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
<4>[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
<4>[ 0.000000] BIOS-e820: 0000000000100000 - 000000005fee0000 (usable)
<4>[ 0.000000] BIOS-e820: 000000005fee0000 - 000000005fef5000 (ACPI data)
<4>[ 0.000000] BIOS-e820: 000000005fef5000 - 000000005ff00000 (ACPI NVS)
<4>[ 0.000000] BIOS-e820: 000000005ff00000 - 0000000060000000 (reserved)
<4>[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<4>[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
<4>[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
<4>[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
<4>[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
<4>[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4>[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
<5>[ 0.000000] 638MB HIGHMEM available.
<5>[ 0.000000] 896MB LOWMEM available.
<7>[ 0.000000] Entering add_active_range(0, 0, 392928) 0 entries of 256 used
<4>[ 0.000000] Zone PFN ranges:
<4>[ 0.000000] DMA 0 -> 4096
<4>[ 0.000000] Normal 4096 -> 229376
<4>[ 0.000000] HighMem 229376 -> 392928
<4>[ 0.000000] Movable zone start PFN for each node
<4>[ 0.000000] early_node_map[1] active PFN ranges
<4>[ 0.000000] 0: 0 -> 392928
<7>[ 0.000000] On node 0 totalpages: 392928
<7>[ 0.000000] DMA zone: 32 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
<7>[ 0.000000] Normal zone: 1760 pages used for memmap
<7>[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 1277 pages used for memmap
<7>[ 0.000000] HighMem zone: 162275 pages, LIFO batch:31
<7>[ 0.000000] Movable zone: 0 pages used for memmap
<6>[ 0.000000] DMI present.
<6>[ 0.000000] Using APIC driver default
<4>[ 0.000000] ACPI: RSDP 000F6C00, 0024 (r2 IBM )
<4>[ 0.000000] ACPI: XSDT 5FEE6FE7, 005C (r1 IBM TP-1Y 1290 LTP 0)
<4>[ 0.000000] ACPI: FACP 5FEE7100, 00F4 (r3 IBM TP-1Y 1290 IBM 1)
<4>[ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
<4>[ 0.000000] ACPI: DSDT 5FEE72E7, DB15 (r1 IBM TP-1Y 1290 MSFT 100000E)
<4>[ 0.000000] ACPI: FACS 5FEF6000, 0040
<4>[ 0.000000] ACPI: SSDT 5FEE72B4, 0033 (r1 IBM TP-1Y 1290 MSFT 100000E)
<4>[ 0.000000] ACPI: ECDT 5FEF4DFC, 0052 (r1 IBM TP-1Y 1290 IBM 1)
<4>[ 0.000000] ACPI: TCPA 5FEF4E4E, 0032 (r1 IBM TP-1Y 1290 PTL 1)
<4>[ 0.000000] ACPI: APIC 5FEF4E80, 005A (r1 IBM TP-1Y 1290 IBM 1)
<4>[ 0.000000] ACPI: MCFG 5FEF4EDA, 003C (r1 IBM TP-1Y 1290 IBM 1)
<4>[ 0.000000] ACPI: BOOT 5FEF4FD8, 0028 (r1 IBM TP-1Y 1290 LTP 1)
<6>[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<4>[ 0.000000] Processor #0 6:13 APIC version 20
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
<4>[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>[ 0.000000] ACPI: IRQ0 used by override.
<7>[ 0.000000] ACPI: IRQ2 used by override.
<7>[ 0.000000] ACPI: IRQ9 used by override.
<4>[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
<6>[ 0.000000] Using ACPI (MADT) for SMP configuration information
<4>[ 0.000000] Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
<4>[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
<4>[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
<4>[ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000
<4>[ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000
<4>[ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
<4>[ 0.000000] Built 1 zonelists in Zone order. Total pages: 389859
<5>[ 0.000000] Kernel command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 vga=0x342 resume=/dev/sda1 splash=silent
<6>[ 0.000000] bootsplash: silent mode.
<7>[ 0.000000] mapped APIC to ffffb000 (fee00000)
<7>[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
<6>[ 0.000000] Enabling fast FPU save and restore... done.
<6>[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
<6>[ 0.000000] Initializing CPU#0
<4>[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
<4>[ 0.000000] Detected 2128.049 MHz processor.
<4>[ 8.688102] Console: colour dummy device 80x25
<6>[ 8.688106] console [tty0] enabled
<6>[ 8.688509] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 8.688897] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 8.738420] Memory: 1549652k/1571712k available (2069k kernel code, 20792k reserved, 769k data, 240k init, 654208k highmem)
<4>[ 8.738439] virtual kernel memory layout:
<4>[ 8.738440] fixmap : 0xffdf2000 - 0xfffff000 (2100 kB)
<4>[ 8.738441] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
<4>[ 8.738442] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
<4>[ 8.738443] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
<4>[ 8.738444] .init : 0xc03cb000 - 0xc0407000 ( 240 kB)
<4>[ 8.738445] .data : 0xc0305473 - 0xc03c5c24 ( 769 kB)
<4>[ 8.738446] .text : 0xc0100000 - 0xc0305473 (2069 kB)
<4>[ 8.738460] Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>[ 8.888538] Calibrating delay using timer specific routine.. 4259.43 BogoMIPS (lpj=21297174)
<6>[ 8.888590] Security Framework v1.0.0 initialized
<4>[ 8.888618] Mount-cache hash table entries: 512
<7>[ 8.888791] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
<6>[ 8.888804] CPU: L1 I cache: 32K, L1 D cache: 32K
<6>[ 8.888810] CPU: L2 cache: 2048K
<7>[ 8.888814] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
<6>[ 8.888820] Intel machine check architecture supported.
<6>[ 8.888826] Intel machine check reporting enabled on CPU#0.
<4>[ 8.888833] Compat vDSO mapped to ffffe000.
<6>[ 8.888848] Checking 'hlt' instruction... OK.
<6>[ 8.928823] SMP alternatives: switching to UP code
<6>[ 8.929420] Freeing SMP alternatives: 11k freed
<4>[ 8.929893] *<6>Unpacking initramfs...*********************************************************************************************************************************************************************************************************************************** done
<6>[ 9.070965] Freeing initrd memory: 4104k freed
<6>[ 9.070980] ACPI: Core revision 20070126
<4>[ 9.076190] Parsing all Control Methods:
<4>[ 9.076361] Table [DSDT](id 0001) - 1559 Objects with 74 Devices 442 Methods 24 Regions
<4>[ 9.076379] Parsing all Control Methods:
<4>[ 9.076529] Table [SSDT](id 0002) - 1 Objects with 0 Devices 1 Methods 0 Regions
<4>[ 9.076535] tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
<4>[ 9.088472] evxfevnt-0091 [00] enable : Transition to ACPI mode successful
<4>[ 9.088522] CPU0: Intel(R) Pentium(R) M processor 2.13GHz stepping 08
<6>[ 9.088549] Total of 1 processors activated (4259.43 BogoMIPS).
<4>[ 9.088743] ENABLING IO-APIC IRQs
<6>[ 9.088956] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>[ 9.308414] Brought up 1 CPUs
<6>[ 9.308585] Booting paravirtualized kernel on bare hardware
<6>[ 9.308687] NET: Registered protocol family 16
<6>[ 9.308855] ACPI: bus type pci registered
<6>[ 9.308930] PCI: Using MMCONFIG
<4>[ 9.309626] Setting up standard PCI resources
<4>[ 9.313005] evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
<4>[ 9.313372] evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 1 Runtime GPEs in this block
<6>[ 9.313383] ACPI: EC: EC description table is found, configuring boot EC
<4>[ 9.313385]
<4>[ 9.314527] Completing Region/Field/Buffer/Package initialization:...................................................................................................................................................................................................................................................................................
<4>[ 9.317768] Initialized 23/24 Regions 129/129 Fields 73/73 Buffers 50/62 Packages (1569 nodes)
<4>[ 9.317774] Initializing Device/Processor/Thermal objects by executing _INI methods:.......
<4>[ 9.322818] Executed 7 _INI methods requiring 2 _STA executions (examined 78 objects)
<6>[ 9.322834] ACPI: Interpreter enabled
<6>[ 9.322837] ACPI: (supports S0 S3 S4 S5)
<6>[ 9.322853] ACPI: Using IOAPIC for interrupt routing
<6>[ 9.330658] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
<6>[ 9.330702] ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>[ 9.331175] Force enabled HPET at base address 0xfed00000
<4>[ 9.331181] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
<4>[ 9.331186] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
<6>[ 9.331762] PCI: Transparent bridge - 0000:00:1e.0
<7>[ 9.331855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>[ 9.331999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
<7>[ 9.332100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
<7>[ 9.332206] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
<7>[ 9.332314] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
<6>[ 9.335693] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
<6>[ 9.335879] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
<6>[ 9.336064] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
<6>[ 9.336248] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
<6>[ 9.336433] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
<6>[ 9.336618] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
<6>[ 9.336802] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
<6>[ 9.336986] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
<6>[ 9.337282] ACPI: Power Resource [PUBS] (on)
<6>[ 9.337324] Linux Plug and Play Support v0.97 (c) Adam Belay
<6>[ 9.337350] pnp: PnP ACPI init
<6>[ 9.337357] ACPI: bus type pnp registered
<6>[ 9.340620] pnp: PnP ACPI: found 13 devices
<6>[ 9.340624] ACPI: ACPI bus type pnp unregistered
<6>[ 9.340628] PnPBIOS: Disabled by ACPI PNP
<6>[ 9.340778] PCI: Using ACPI for IRQ routing
<6>[ 9.340782] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<4>[ 9.368408] ACPI: RTC can wake from S4
<6>[ 9.378355] Time: tsc clocksource has been installed.
<6>[ 9.398374] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
<6>[ 9.398378] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
<6>[ 9.398382] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
<6>[ 9.398386] pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved
<6>[ 9.398392] pnp: 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
<6>[ 9.398397] pnp: 00:02: iomem range 0xf0008000-0xf000bfff could not be reserved
<6>[ 9.398401] pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
<6>[ 9.398406] pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
<6>[ 9.428675] PCI: Bridge: 0000:00:01.0
<6>[ 9.428679] IO window: 3000-3fff
<6>[ 9.428683] MEM window: b0100000-b01fffff
<6>[ 9.428686] PREFETCH window: c0000000-c7ffffff
<6>[ 9.428690] PCI: Bridge: 0000:00:1c.0
<6>[ 9.428692] IO window: disabled.
<6>[ 9.428697] MEM window: b0200000-b02fffff
<6>[ 9.428702] PREFETCH window: disabled.
<6>[ 9.428707] PCI: Bridge: 0000:00:1c.2
<6>[ 9.428711] IO window: 4000-4fff
<6>[ 9.428716] MEM window: b2000000-b3ffffff
<6>[ 9.428721] PREFETCH window: c8000000-c80fffff
<4>[ 9.428727] PCI: Bus 12, cardbus bridge: 0000:0b:00.0
<4>[ 9.428731] IO window: 00005000-000050ff
<4>[ 9.428736] IO window: 00005400-000054ff
<4>[ 9.428741] PREFETCH window: d0000000-d3ffffff
<4>[ 9.428746] MEM window: b8000000-bbffffff
<6>[ 9.428751] PCI: Bridge: 0000:00:1e.0
<6>[ 9.428755] IO window: 5000-8fff
<6>[ 9.428760] MEM window: b4000000-bfffffff
<6>[ 9.428765] PREFETCH window: d0000000-d7ffffff
<6>[ 9.428782] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>[ 9.428788] PCI: Setting latency timer of device 0000:00:01.0 to 64
<6>[ 9.428809] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17
<7>[ 9.428816] PCI: Setting latency timer of device 0000:00:1c.0 to 64
<6>[ 9.428833] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 18
<7>[ 9.428840] PCI: Setting latency timer of device 0000:00:1c.2 to 64
<7>[ 9.428850] PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>[ 9.428863] ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16
<6>[ 9.428886] NET: Registered protocol family 2
<6>[ 9.528359] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 9.528469] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
<6>[ 9.529980] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>[ 9.530644] TCP: Hash tables configured (established 131072 bind 65536)
<6>[ 9.530653] TCP reno registered
<6>[ 9.558476] Simple Boot Flag at 0x35 set to 0x1
<6>[ 9.558533] Machine check exception polling timer started.
<6>[ 9.558725] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
<6>[ 9.558732] hpet0: 3 64-bit timers, 14318180 Hz
<6>[ 9.559923] audit: initializing netlink socket (disabled)
<5>[ 9.559937] audit(1196761664.709:1): initialized
<4>[ 9.560010] highmem bounce pool size: 64 pages
<4>[ 9.560015] Total HugeTLB memory allocated, 0
<5>[ 9.560081] VFS: Disk quotas dquot_6.5.1
<4>[ 9.560094] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>[ 9.560197] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
<6>[ 9.560203] io scheduler noop registered
<6>[ 9.560215] io scheduler cfq registered (default)
<7>[ 9.560307] Boot video device is 0000:01:00.0
<7>[ 9.560393] PCI: Setting latency timer of device 0000:00:01.0 to 64
<4>[ 9.560409] assign_interrupt_mode Found MSI capability
<7>[ 9.560430] Allocate Port Service[0000:00:01.0:pcie00]
<7>[ 9.560459] Allocate Port Service[0000:00:01.0:pcie03]
<7>[ 9.560507] PCI: Setting latency timer of device 0000:00:1c.0 to 64
<4>[ 9.560543] assign_interrupt_mode Found MSI capability
<7>[ 9.560575] Allocate Port Service[0000:00:1c.0:pcie00]
<7>[ 9.560601] Allocate Port Service[0000:00:1c.0:pcie02]
<7>[ 9.560628] Allocate Port Service[0000:00:1c.0:pcie03]
<7>[ 9.560697] PCI: Setting latency timer of device 0000:00:1c.2 to 64
<4>[ 9.560733] assign_interrupt_mode Found MSI capability
<7>[ 9.560764] Allocate Port Service[0000:00:1c.2:pcie00]
<7>[ 9.560790] Allocate Port Service[0000:00:1c.2:pcie02]
<7>[ 9.560818] Allocate Port Service[0000:00:1c.2:pcie03]
<6>[ 9.561019] vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 11484k, total 131008k
<6>[ 9.561025] vesafb: mode is 1400x1050x16, linelength=2800, pages=44
<6>[ 9.561028] vesafb: protected mode interface info at c000:5b63
<6>[ 9.561032] vesafb: pmi: set display start = c00c5bd1, set palette = c00c5c0b
<6>[ 9.561035] vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4
<6>[ 9.561045] vesafb: scrolling: redraw
<6>[ 9.561048] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>[ 9.561305] bootsplash 3.1.6-2004/03/31: looking for picture...
<6>[ 9.588287] bootsplash: silentjpeg size 100197 bytes
<6>[ 9.620893] bootsplash: ...found (1400x1050, 36741 bytes, v3).
<4>[ 9.719965] Console: switching to colour frame buffer device 171x61
<6>[ 9.858190] fb0: VESA VGA frame buffer device
<6>[ 9.858489] isapnp: Scanning for PnP cards...
<6>[ 10.068078] Switched to NOHz mode on CPU #0
<6>[ 10.172116] isapnp: No Plug & Play device found
<6>[ 10.172304] rpldhk 2.40, (C) Jan Engelhardt, 2004 - 2007
<6>[ 10.174551] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>[ 10.175686] pnp: Device 00:0a activated.
<6>[ 10.175963] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
<6>[ 10.176308] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 19
<6>[ 10.176614] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
<4>[ 10.176962] netconsole: not configured, aborting
<6>[ 10.177212] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
<6>[ 10.185183] serio: i8042 KBD port at 0x60,0x64 irq 1
<6>[ 10.185383] serio: i8042 AUX port at 0x60,0x64 irq 12
<6>[ 10.185694] mice: PS/2 mouse device common for all mice
<6>[ 10.190264] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
<6>[ 10.196139] NET: Registered protocol family 1
<4>[ 10.196316] Using IPI No-Shortcut mode
<6>[ 10.196705] Freeing unused kernel memory: 240k freed
<4>[ 10.196917] Write protecting the kernel read-only data: 541k
<6>[ 10.223917] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
<6>[ 10.224183] ACPI: Processor [CPU] (supports 8 throttling states)
<6>[ 10.227747] ACPI: Thermal Zone [THM0] (46 C)
<5>[ 10.235118] SCSI subsystem initialized
<7>[ 10.240733] libata version 2.21 loaded.
<7>[ 10.242209] ahci 0000:00:1f.2: version 2.3
<4>[ 10.242242] ahci: probe of 0000:00:1f.2 failed with error -22
<7>[ 10.249872] ata_piix 0000:00:1f.2: version 2.12
<6>[ 10.249879] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
<6>[ 10.282998] IBM TrackPoint firmware: 0x0e, buttons: 3/3
<6>[ 10.284095] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input1
<4>[ 13.475658] Clocksource tsc unstable (delta = -449769114 ns)
<7>[ 13.476084] PCI: Setting latency timer of device 0000:00:1f.2 to 64
<6>[ 13.476390] scsi0 : ata_piix
<6>[ 13.476543] scsi1 : ata_piix
<6>[ 13.476665] Time: hpet clocksource has been installed.
<6>[ 13.476886] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118c0 irq 14
<6>[ 13.477209] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118c8 irq 15
<6>[ 17.291872] ata1.00: ATA-6: FUJITSU MHV2100AH, 00840096, max UDMA/100
<6>[ 17.303341] ata1.00: 195371568 sectors, multi 16: LBA
<6>[ 17.314817] ata1.00: applying bridge limits
<6>[ 17.328936] ata1.00: configured for UDMA/100
<6>[ 20.179744] ata2.00: ATAPI: MATSHITADVD-RAM UJ-822Sy, RC01, max UDMA/33
<6>[ 20.192290] ata2.00: configured for UDMA/33
<5>[ 20.203739] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2100A 0084 PQ: 0 ANSI: 5
<5>[ 20.216627] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-822Sy RC01 PQ: 0 ANSI: 5
<6>[ 20.241462] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
<6>[ 20.412428] usbcore: registered new interface driver usbfs
<5>[ 20.464377] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
<6>[ 20.476816] usbcore: registered new interface driver hub
<5>[ 20.526766] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 20.539087] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<6>[ 20.539205] usbcore: registered new device driver usb
<5>[ 20.564436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 20.582023] USB Universal Host Controller Interface driver v3.0
<6>[ 20.594709] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>[ 20.607530] PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>[ 20.607534] uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>[ 20.622553] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
<5>[ 20.635555] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
<6>[ 20.648501] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
<5>[ 20.661502] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 20.674454] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<6>[ 20.674493] usb usb1: new device found, idVendor=0000, idProduct=0000
<6>[ 20.687541] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 20.700559] usb usb1: Product: UHCI Host Controller
<6>[ 20.713555] usb usb1: Manufacturer: Linux 2.6.23.8-ccj59-default uhci_hcd
<6>[ 20.726673] usb usb1: SerialNumber: 0000:00:1d.0
<5>[ 20.739814] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 20.753235] sda:<6>usb usb1: configuration #1 chosen from 1 choice
<6>[ 20.767483] hub 1-0:1.0: USB hub found
<6>[ 20.780773] hub 1-0:1.0: 2 ports detected
<6>[ 20.896893] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 20
<7>[ 20.910353] PCI: Setting latency timer of device 0000:00:1d.7 to 64
<6>[ 20.910357] ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>[ 20.923928] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
<6>[ 20.937524] ehci_hcd 0000:00:1d.7: debug port 1
<7>[ 20.950966] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
<6>[ 20.950976] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xb0000000
<6>[ 20.968295] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>[ 20.982097] usb usb2: new device found, idVendor=0000, idProduct=0000
<6>[ 20.995929] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 21.009664] usb usb2: Product: EHCI Host Controller
<6>[ 21.023224] usb usb2: Manufacturer: Linux 2.6.23.8-ccj59-default ehci_hcd
<6>[ 21.036923] usb usb2: SerialNumber: 0000:00:1d.7
<6>[ 21.050853] usb usb2: configuration #1 chosen from 1 choice
<6>[ 21.064697] hub 2-0:1.0: USB hub found
<6>[ 21.078342] hub 2-0:1.0: 8 ports detected
<4>[ 21.102772] sda1 sda2 sda3
<5>[ 21.159021] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[ 21.200215] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21
<7>[ 21.214249] PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>[ 21.214253] uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>[ 21.228372] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
<6>[ 21.242383] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820
<6>[ 21.256393] usb usb3: new device found, idVendor=0000, idProduct=0000
<6>[ 21.270430] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 21.284318] usb usb3: Product: UHCI Host Controller
<6>[ 21.298019] usb usb3: Manufacturer: Linux 2.6.23.8-ccj59-default uhci_hcd
<6>[ 21.311803] usb usb3: SerialNumber: 0000:00:1d.1
<6>[ 21.326039] usb usb3: configuration #1 chosen from 1 choice
<6>[ 21.340122] hub 3-0:1.0: USB hub found
<6>[ 21.354076] hub 3-0:1.0: 2 ports detected
<6>[ 21.474365] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22
<7>[ 21.488534] PCI: Setting latency timer of device 0000:00:1d.2 to 64
<6>[ 21.488538] uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>[ 21.502811] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
<6>[ 21.517141] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
<6>[ 21.531511] usb usb4: new device found, idVendor=0000, idProduct=0000
<6>[ 21.545833] usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 21.560077] usb usb4: Product: UHCI Host Controller
<6>[ 21.574141] usb usb4: Manufacturer: Linux 2.6.23.8-ccj59-default uhci_hcd
<6>[ 21.588302] usb usb4: SerialNumber: 0000:00:1d.2
<6>[ 21.602557] usb usb4: configuration #1 chosen from 1 choice
<6>[ 21.616650] hub 4-0:1.0: USB hub found
<6>[ 21.630527] hub 4-0:1.0: 2 ports detected
<6>[ 21.773171] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 20
<7>[ 21.787121] PCI: Setting latency timer of device 0000:00:1d.3 to 64
<6>[ 21.787124] uhci_hcd 0000:00:1d.3: UHCI Host Controller
<6>[ 21.801183] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
<6>[ 21.815259] uhci_hcd 0000:00:1d.3: irq 20, io base 0x00001860
<6>[ 21.829371] usb usb5: new device found, idVendor=0000, idProduct=0000
<6>[ 21.843213] usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 21.856943] usb usb5: Product: UHCI Host Controller
<6>[ 21.870512] usb usb5: Manufacturer: Linux 2.6.23.8-ccj59-default uhci_hcd
<6>[ 21.884118] usb usb5: SerialNumber: 0000:00:1d.3
<6>[ 21.897866] usb usb5: configuration #1 chosen from 1 choice
<6>[ 21.911385] hub 5-0:1.0: USB hub found
<6>[ 21.924697] hub 5-0:1.0: 2 ports detected
<4>[ 22.122162] swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
<4>[ 22.122168] swsusp: Basic memory bitmaps created
<4>[ 22.151310] swsusp: Basic memory bitmaps freed
<4>[ 22.156197] Attempting manual resume
<6>[ 22.253521] usb 4-1: new full speed USB device using uhci_hcd and address 2
<6>[ 22.432160] usb 4-1: new device found, idVendor=0a5c, idProduct=201e
<6>[ 22.445283] usb 4-1: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>[ 22.458335] usb 4-1: Product: IBM Bluetooth Module
<6>[ 22.471207] usb 4-1: Manufacturer: Broadcom
<6>[ 22.484618] usb 4-1: configuration #1 chosen from 1 choice
<6>[ 22.783960] usb 4-2: new full speed USB device using uhci_hcd and address 3
<6>[ 22.987949] usb 4-2: new device found, idVendor=0483, idProduct=2016
<6>[ 23.001297] usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>[ 23.014709] usb 4-2: Product: Biometric Coprocessor
<6>[ 23.028012] usb 4-2: Manufacturer: STMicroelectronics
<6>[ 23.044158] usb 4-2: configuration #1 chosen from 1 choice
<6>[ 29.048586] kjournald starting. Commit interval 5 seconds
<6>[ 29.061269] EXT3 FS on sda2, internal journal
<6>[ 29.073609] EXT3-fs: mounted filesystem with ordered data mode.
<5>[ 35.977760] sd 0:0:0:0: Attached scsi generic sg0 type 0
<6>[ 36.035702] Linux agpgart interface v0.102
<5>[ 36.093227] scsi 1:0:0:0: Attached scsi generic sg1 type 5
<6>[ 36.157404] iTCO_vendor_support: vendor-support=0
<6>[ 36.208363] Bluetooth: Core ver 2.11
<6>[ 36.293232] tg3.c:v3.81.1 (October 18, 2007)
<6>[ 36.304400] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
<6>[ 36.320168] NET: Registered protocol family 31
<6>[ 36.331516] Bluetooth: HCI device and connection manager initialized
<6>[ 36.342826] Bluetooth: HCI socket layer initialized
<7>[ 36.537279] PCI: Setting latency timer of device 0000:02:00.0 to 64
<6>[ 36.538120] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
<6>[ 36.560878] Non-volatile memory driver v1.2
<6>[ 36.622932] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
<6>[ 36.637185] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
<6>[ 36.658913] eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:58:7f:0c:0b
<6>[ 36.671115] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
<6>[ 36.682980] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
<4>[ 36.732537] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
<6>[ 36.744449] Uniform CD-ROM driver Revision: 3.20
<6>[ 36.756662] input: Power Button (FF) as /devices/virtual/input/input2
<6>[ 36.768302] ACPI: Power Button (FF) [PWRF]
<6>[ 36.780130] input: Lid Switch as /devices/virtual/input/input3
<7>[ 36.807998] sr 1:0:0:0: Attached scsi CD-ROM sr0
<6>[ 36.817567] Yenta: CardBus bridge found at 0000:0b:00.0 [1014:056c]
<7>[ 36.830767] ieee80211_crypt: registered algorithm 'NULL'
<6>[ 36.831691] ACPI: Lid Switch [LID]
<6>[ 36.850661] ACPI: AC Adapter [AC] (on-line)
<6>[ 36.863215] Bluetooth: HCI USB driver ver 2.9
<6>[ 36.877082] input: Sleep Button (CM) as /devices/virtual/input/input4
<6>[ 36.891859] usbcore: registered new interface driver hci_usb
<6>[ 36.927216] ACPI: Sleep Button (CM) [SLPB]
<6>[ 36.941321] ACPI: Battery Slot [BAT0] (battery present)
<6>[ 38.555244] Yenta: ISA IRQ mask 0x04b8, PCI irq 16
<6>[ 38.566441] Socket status: 30000006
<6>[ 38.577686] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff
<6>[ 38.589341] cs: IO port probe 0x5000-0x8fff:<6>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
<6>[ 38.601994] rtc0: alarms up to one month, y3k
<4>[ 38.619224] clean.
<6>[ 38.631020] pcmcia: parent PCI bridge Memory window: 0xb4000000 - 0xbfffffff
<6>[ 38.643608] pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff
<6>[ 38.658775] ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 19
<6>[ 38.786104] Floppy drive(s): fd0 is 1.44M
<3>[ 38.825909] intel_rng: FWH not detected
<6>[ 38.840986] FDC 0 is a National Semiconductor PC87306
<6>[ 38.875987] parport_pc 00:0b: reported by Plug and Play ACPI
<6>[ 38.888151] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
<6>[ 38.903695] ieee80211: 802.11 data/management/control stack, git-1.1.13
<6>[ 38.915433] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
<6>[ 39.159742] thinkpad_acpi: ThinkPad ACPI Extras v0.16
<6>[ 39.171777] thinkpad_acpi: http://ibm-acpi.sf.net/
<6>[ 39.183741] thinkpad_acpi: ThinkPad BIOS 1YET65WW (1.29 ), EC 1YHT29WW-1.06
<6>[ 39.195863] thinkpad_acpi: IBM ThinkPad T43p
<6>[ 39.209309] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 19
<7>[ 39.222722] PCI: Setting latency timer of device 0000:00:1e.3 to 64
<5>[ 39.232392] thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode
<6>[ 39.247765] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
<6>[ 39.260569] ipw2200: Copyright(c) 2003-2006 Intel Corporation
<6>[ 39.284975] input: ThinkPad Extra Buttons as /devices/virtual/input/input5
<4>[ 39.333669] ALSA sound/pci/ac97/ac97_codec.c:2145: MC'97 1 converters and GPIO not ready (0xff00)
<6>[ 39.350102] ACPI: PCI Interrupt 0000:0b:02.0[A] -> GSI 21 (level, low) -> IRQ 23
<6>[ 39.363404] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
<6>[ 39.619229] cs: IO port probe 0x100-0x3af: clean.
<6>[ 39.634432] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
<6>[ 39.648543] cs: IO port probe 0x820-0x8ff: clean.
<6>[ 39.662352] cs: IO port probe 0xc00-0xcf7: clean.
<6>[ 39.676784] cs: IO port probe 0xa00-0xaff: clean.
<6>[ 39.826882] ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels)
<6>[ 39.840072] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 18
<7>[ 39.865762] PCI: Setting latency timer of device 0000:00:1e.2 to 64
<6>[ 40.317317] Bluetooth: L2CAP ver 2.8
<6>[ 40.330371] Bluetooth: L2CAP socket layer initialized
<6>[ 40.347707] Bluetooth: RFCOMM socket layer initialized
<6>[ 40.360764] Bluetooth: RFCOMM TTY layer initialized
<6>[ 40.373518] Bluetooth: RFCOMM ver 1.8
<6>[ 40.444411] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
<6>[ 40.457015] Bluetooth: BNEP filters: protocol multicast
<6>[ 40.927716] intel8x0_measure_ac97_clock: measured 85154 usecs
<6>[ 40.940163] intel8x0: clocking to 48000
<6>[ 41.180118] Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k
<6>[ 41.607114] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
<6>[ 45.103519] loop: module loaded
<6>[ 45.133569] kjournald starting. Commit interval 5 seconds
<6>[ 45.145947] EXT3 FS on sda3, internal journal
<6>[ 45.158031] EXT3-fs: mounted filesystem with ordered data mode.
<6>[ 45.482973] AppArmor: AppArmor initialized
<5>[ 45.495598] audit(1196761719.911:2): type=1505 info="AppArmor initialized" pid=1703
<4>[ 46.862139] fuse init (API version 7.8)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Tue Dec 4 09:47:45 2007
Creating device nodes with udev
Trying manual resume from /dev/sda1
Invoking userspace resume from /dev/sda1
resume: Could not stat configuration file
resume: libgcrypt version: 1.2.4
Trying manual resume from /dev/sda1
Invoking in-kernel resume from /dev/sda1
Waiting for device /dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 to appear: ok
fsck 1.40.2 (12-Jul-2007)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2
/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2: recovering journal
/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2: Clearing orphaned inode 2315504 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2: Clearing orphaned inode 2315503 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2: Clearing orphaned inode 2315444 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2: Clearing orphaned inode 1232919 (uid=1000, gid=100, mode=0100600, size=0)
/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2: Clearing orphaned inode 2315361 (uid=1000, gid=100, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2: Clearing orphaned inode 1232884 (uid=0, gid=0, mode=0100600, size=217016)
/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2: clean, 312413/2626560 files, 3123445/5242880 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2
Boot logging started on /dev/tty1(/dev/console (deleted)) at Tue Dec 4 10:48:26 2007
done
Starting udevd done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
donemount: according to mtab, /dev/sda2 is already mounted on /
Activating device mapper...
done
Checking file systems...
fsck 1.40.2 (12-Jul-2007)
/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part3: recovering journal
/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part3: clean, 58419/9338880 files, 14703726/18651465 blocks
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda3 on /home type ext3 (rw,acl,user_xattr)
doneSetting up the hardware clockMounting securityfs on /sys/kernel/security done
Loading AppArmor module done
Loading AppArmor profiles <notice>killproc: kill(908,29)
Setting up hostname 'mk-notebook'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
Checking for network time protocol daemon (NTPD): unused
select() to /dev/rtc to wait for clock tick timed out
failed
Loading fuse module done
Mounting fuse control filesystemdone
done
Creating /var/log/boot.msg
doneActivating remaining swap-devices in /etc/fstab...
doneConfiguring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a undefined
Configured serial ports
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
Can't determine current runlevel
done
System Boot Control: The system has been set up
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done
INIT: Entering runlevel: 5
Boot logging started on /dev/tty1(/dev/console) at Tue Dec 4 10:48:45 2007
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
Starting D-Bus daemon<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PWD=/ PREVLEVEL=N LINES=61 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PWD=/ PREVLEVEL=N LINES=61 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog services.done
<notice>killproc: kill(908,3)
done
Starting acpid <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/sbin/acpid ]
done
Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
done
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting jexec servicesStarting HAL daemondone
Loading CPUFreq modulesdone
Starting service kdmdone
<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=61 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
Starting the DHCP DBUS Daemon<notice>startproc: execve (/usr/sbin/dhcdbd) [ /usr/sbin/dhcdbd --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/usr/sbin/dhcdbd ]
done
Starting the NetworkManagerDispatcher<notice>startproc: execve (/usr/sbin/NetworkManagerDispatcher) [ /usr/sbin/NetworkManagerDispatcher ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManagerDispatcher ]
done
Starting the NetworkManager<notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ]
done
Mount CIFS File Systems unused
Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
done<notice>checkproc: /opt/kde3/bin/kdm 2267
<notice>checkproc: /opt/kde3/bin/kdm 2267
Starting auditd <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/sbin/auditd ]
done
Starting Avahi daemon<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
done
Starting Avahi DNS Configuration daemon<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
done
Starting hotkey-setup done
Starting irqbalance unused
Checking/updating CPU microcode done
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
Starting mail service (Postfix)done
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
Starting powersaved: <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
done
Initializing random number generatordone
Starting smartd <notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
done
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
VMware Server is installed, but it has not been (correctly) configured
for the running kernel. To (re-)configure it, invoke the
following command: /usr/bin/vmware-config.pl.
Starting INET services. (xinetd)<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=171 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x342 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1400x1050.cfg PREVLEVEL=N LINES=61 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2100_NT19T6325D1F-part2 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
done
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: vmware
Skipped services in runlevel 5: smbfs irq_balancer
<notice>killproc: kill(1992,3)