[ 2.464864] ahci 0000:01:00.0: controller reset failed (0x80000001)
[ 2.464974] ahci 0000:01:00.0: AHCI 0000.0000 1 slots 1 ports ? Gbps 0x1 impl SATA mode
[ 2.464976] ahci 0000:01:00.0: flags:
[ 2.465190] scsi host4: ahci
[ 2.465238] ata5: SATA max UDMA/133 abar m2048@0xfe515000 port 0xfe515100 irq 28
[ 2.465265] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.465270] ehci-pci: EHCI PCI platform driver
[ 2.465402] QUIRK: Enable AMD PLL fix
[ 2.465419] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.465424] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.465428] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.465436] ehci-pci 0000:00:12.2: debug port 1
[ 2.465465] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe609000
[ 2.470886] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.470926] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.470927] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.470929] usb usb1: Product: EHCI Host Controller
[ 2.470930] usb usb1: Manufacturer: Linux 3.19.4-1.g74c332b-desktop ehci_hcd
[ 2.470931] usb usb1: SerialNumber: 0000:00:12.2
[ 2.471075] hub 1-0:1.0: USB hub found
[ 2.471082] hub 1-0:1.0: 5 ports detected
[ 2.471356] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.471361] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.471364] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.471372] ehci-pci 0000:00:13.2: debug port 1
[ 2.471396] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe607000
[ 2.476906] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.476950] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.476952] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.476953] usb usb2: Product: EHCI Host Controller
[ 2.476955] usb usb2: Manufacturer: Linux 3.19.4-1.g74c332b-desktop ehci_hcd
[ 2.476956] usb usb2: SerialNumber: 0000:00:13.2
[ 2.477071] hub 2-0:1.0: USB hub found
[ 2.477076] hub 2-0:1.0: 5 ports detected
[ 2.477328] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 2.477332] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 2.477335] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.477343] ehci-pci 0000:00:16.2: debug port 1
[ 2.477364] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe604000
[ 2.482914] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.482953] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.482954] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.482956] usb usb3: Product: EHCI Host Controller
[ 2.482957] usb usb3: Manufacturer: Linux 3.19.4-1.g74c332b-desktop ehci_hcd
[ 2.482958] usb usb3: SerialNumber: 0000:00:16.2
[ 2.483078] hub 3-0:1.0: USB hub found
[ 2.483084] hub 3-0:1.0: 4 ports detected
[ 2.483204] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.483207] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.483255] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.483256] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.483743] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.483845] mousedev: PS/2 mouse device common for all mice
[ 2.483964] rtc_cmos 00:05: RTC can wake from S4
[ 2.484069] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.484086] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram
[ 2.484098] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.484116] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.484216] usbcore: registered new interface driver usbhid
[ 2.484217] usbhid: USB HID core driver
[ 2.484260] TCP: cubic registered
[ 2.484323] NET: Registered protocol family 10
[ 2.485240] registered taskstats version 1
[ 2.485271] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.485777] Magic number: 11:932:371
[ 2.485877] rtc_cmos 00:05: setting system clock to 2015-04-17 08:23:24 UTC (1429259004)
[ 2.485956] PM: Hibernation image not present or could not be loaded.
[ 2.513892] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.770417] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.770864] Freeing unused kernel memory: 1544K (ffffffff81f09000 - ffffffff8208b000)
[ 2.770866] Write protecting the kernel read-only data: 14336k
[ 2.771414] Freeing unused kernel memory: 1584K (ffff880001674000 - ffff880001800000)
[ 2.771753] Freeing unused kernel memory: 1208K (ffff880001cd2000 - ffff880001e00000)
[ 2.773486] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 2.773779] random: systemd urandom read with 35 bits of entropy available
[ 2.774357] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 2.774563] systemd[1]: Detected architecture 'x86-64'.
[ 2.774566] systemd[1]: Running in initial RAM disk.
[ 2.774582] systemd[1]: Set hostname to <linux-lfr4>.
[ 2.785420] usb 3-4: new high-speed USB device number 2 using ehci-pci
[ 2.811890] systemd[1]: Unit type .busname is not supported on this system.
[ 2.814881] systemd[1]: Cannot add dependency job for unit systemd-journald-dev-log.socket, ignoring: Unit systemd-journald-dev-log.socket failed to load: No such file or directory.
[ 2.814887] systemd[1]: Cannot add dependency job for unit systemd-journald-audit.socket, ignoring: Unit systemd-journald-audit.socket failed to load: No such file or directory.
[ 2.815127] systemd[1]: Reached target Local File Systems.
[ 2.815134] systemd[1]: Starting Local File Systems.
[ 2.815331] systemd[1]: Created slice -.slice.
[ 2.815337] systemd[1]: Starting -.slice.
[ 2.815399] systemd[1]: Created slice System Slice.
[ 2.815406] systemd[1]: Starting System Slice.
[ 2.815453] systemd[1]: Listening on udev Control Socket.
[ 2.815459] systemd[1]: Starting udev Control Socket.
[ 2.815530] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.815536] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 2.815557] systemd[1]: Reached target Swap.
[ 2.815562] systemd[1]: Starting Swap.
[ 2.815598] systemd[1]: Listening on Journal Socket.
[ 2.815604] systemd[1]: Starting Journal Socket.
[ 2.816017] systemd[1]: Starting Load Kernel Modules...
[ 2.816040] systemd[1]: Reached target Timers.
[ 2.816048] systemd[1]: Starting Timers.
[ 2.816085] systemd[1]: Listening on udev Kernel Socket.
[ 2.816092] systemd[1]: Starting udev Kernel Socket.
[ 2.816461] systemd[1]: Starting Setup Virtual Console...
[ 2.816890] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 2.817342] systemd[1]: Starting dracut cmdline hook...
[ 2.817367] systemd[1]: Reached target Sockets.
[ 2.817376] systemd[1]: Starting Sockets.
[ 2.817858] systemd[1]: Starting Journal Service...
[ 2.817881] systemd[1]: Reached target Slices.
[ 2.817891] systemd[1]: Starting Slices.
[ 2.818903] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.819056] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 2.819484] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.819652] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.820023] systemd[1]: Started Load Kernel Modules.
[ 2.820268] systemd-journald[177]: Failed to set file attributes: Inappropriate ioctl for device
[ 2.820970] systemd[1]: Started Apply Kernel Variables.
[ 2.821534] systemd[1]: Started Create Static Device Nodes in /dev.
[ 2.821557] audit: type=1130 audit(1429251804.834:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.825662] systemd[1]: Started Setup Virtual Console.
[ 2.825677] audit: type=1130 audit(1429251804.838:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.849485] systemd[1]: Started Journal Service.
[ 2.849542] audit: type=1130 audit(1429251804.862:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.864510] audit: type=1130 audit(1429251804.876:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.868240] audit: type=1130 audit(1429251804.880:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.880154] audit: type=1130 audit(1429251804.892:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.895091] audit: type=1130 audit(1429251804.907:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.902202] usb 3-4: New USB device found, idVendor=058f, idProduct=6362
[ 2.902205] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.902208] usb 3-4: Product: Mass Storage Device
[ 2.902210] usb 3-4: Manufacturer: Generic
[ 2.902212] usb 3-4: SerialNumber: 058F63626476
[ 2.928477] audit: type=1130 audit(1429251804.940:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.976049] pata_marvell 0000:01:00.1: enabling device (0000 -> 0003)
[ 2.976787] scsi host5: pata_marvell
[ 2.977138] scsi host6: pata_marvell
[ 2.977251] ata6: PATA max UDMA/100 cmd 0xe040 ctl 0xe030 bmdma 0xe000 irq 29
[ 2.977254] ata7: PATA max UDMA/133 cmd 0xe020 ctl 0xe010 bmdma 0xe008 irq 29
[ 2.977508] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.977515] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[ 2.977528] pata_via 0000:04:00.1: version 0.3.4
[ 2.977537] pata_via 0000:04:00.1: enabling device (0000 -> 0001)
[ 2.977698] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.977701] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.977703] usb usb4: Product: xHCI Host Controller
[ 2.977705] usb usb4: Manufacturer: Linux 3.19.4-1.g74c332b-desktop xhci-hcd
[ 2.977706] usb usb4: SerialNumber: 0000:02:00.0
[ 2.977946] hub 4-0:1.0: USB hub found
[ 2.977956] hub 4-0:1.0: 2 ports detected
[ 2.978112] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.978115] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 5
[ 2.978155] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.978157] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.978159] usb usb5: Product: xHCI Host Controller
[ 2.978162] usb usb5: Manufacturer: Linux 3.19.4-1.g74c332b-desktop xhci-hcd
[ 2.978164] usb usb5: SerialNumber: 0000:02:00.0
[ 2.978519] hub 5-0:1.0: USB hub found
[ 2.978527] hub 5-0:1.0: 2 ports detected
[ 2.978964] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 2.978972] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
[ 2.979160] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.979163] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.979164] usb usb6: Product: xHCI Host Controller
[ 2.979166] usb usb6: Manufacturer: Linux 3.19.4-1.g74c332b-desktop xhci-hcd
[ 2.979168] usb usb6: SerialNumber: 0000:03:00.0
[ 2.979499] hub 6-0:1.0: USB hub found
[ 2.979531] hub 6-0:1.0: 2 ports detected
[ 2.979748] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 2.979752] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 7
[ 2.979785] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.979787] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.979788] usb usb7: Product: xHCI Host Controller
[ 2.979789] usb usb7: Manufacturer: Linux 3.19.4-1.g74c332b-desktop xhci-hcd
[ 2.979790] usb usb7: SerialNumber: 0000:03:00.0
[ 2.979951] [drm] Initialized drm 1.1.0 20060810
[ 2.980010] hub 7-0:1.0: USB hub found
[ 2.980020] hub 7-0:1.0: 2 ports detected
[ 2.983173] scsi host7: pata_via
[ 2.983342] scsi host8: pata_via
[ 2.983662] ata8: PATA max UDMA/133 cmd 0xd140 ctl 0xd130 bmdma 0xd100 irq 31
[ 2.983665] ata9: PATA max UDMA/133 cmd 0xd120 ctl 0xd110 bmdma 0xd108 irq 31
[ 2.983995] ohci-pci: OHCI PCI platform driver
[ 2.984134] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.984141] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
[ 2.984169] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe60a000
[ 2.987785] [drm] radeon kernel modesetting enabled.
[ 2.988794] checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
[ 2.988797] fb: switching to radeondrmfb from VESA VGA
[ 2.988830] Console: switching to colour dummy device 80x25
[ 2.989188] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x174B:0x1482).
[ 2.989197] [drm] register mmio base: 0xFE020000
[ 2.989198] [drm] register mmio size: 131072
[ 2.989242] ATOM BIOS: JUNIPER
[ 2.989320] radeon 0000:06:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 2.989322] radeon 0000:06:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 2.989323] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 2.989324] [drm] RAM width 128bits DDR
[ 2.989387] [TTM] Zone kernel: Available graphics memory: 8193552 kiB
[ 2.989388] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.989389] [TTM] Initializing pool allocator
[ 2.989393] [TTM] Initializing DMA pool allocator
[ 2.989407] [drm] radeon: 1024M of VRAM memory ready
[ 2.989408] [drm] radeon: 1024M of GTT memory ready.
[ 2.989418] [drm] Loading JUNIPER Microcode
[ 2.989474] [drm] Internal thermal controller with fan control
[ 3.006238] usb-storage 3-4:1.0: USB Mass Storage device detected
[ 3.006362] scsi host9: usb-storage 3-4:1.0
[ 3.006461] usbcore: registered new interface driver usb-storage
[ 3.006734] usbcore: registered new interface driver uas
[ 3.015415] [drm] radeon: dpm initialized
[ 3.015480] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 3.016354] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 3.036877] firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 3.038919] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.038922] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.038924] usb usb8: Product: OHCI PCI host controller
[ 3.038925] usb usb8: Manufacturer: Linux 3.19.4-1.g74c332b-desktop ohci_hcd
[ 3.038927] usb usb8: SerialNumber: 0000:00:12.0
[ 3.039045] hub 8-0:1.0: USB hub found
[ 3.039055] hub 8-0:1.0: 5 ports detected
[ 3.039317] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 3.039322] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
[ 3.039340] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe608000
[ 3.050859] [drm] PCIE GART of 1024M enabled (table at 0x000000000025E000).
[ 3.050947] radeon 0000:06:00.0: WB enabled
[ 3.050950] radeon 0000:06:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880428980c00
[ 3.050952] radeon 0000:06:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880428980c0c
[ 3.051709] radeon 0000:06:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc90011c1c418
[ 3.051711] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.051712] [drm] Driver supports precise vblank timestamp query.
[ 3.051713] radeon 0000:06:00.0: radeon: MSI limited to 32-bit
[ 3.051736] radeon 0000:06:00.0: radeon: using MSI.
[ 3.051754] [drm] radeon: irq initialized.
[ 3.067973] [drm] ring test on 0 succeeded in 1 usecs
[ 3.067977] [drm] ring test on 3 succeeded in 2 usecs
[ 3.094000] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.094003] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.094005] usb usb9: Product: OHCI PCI host controller
[ 3.094006] usb usb9: Manufacturer: Linux 3.19.4-1.g74c332b-desktop ohci_hcd
[ 3.094007] usb usb9: SerialNumber: 0000:00:13.0
[ 3.094132] hub 9-0:1.0: USB hub found
[ 3.094139] hub 9-0:1.0: 5 ports detected
[ 3.094388] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 3.094393] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
[ 3.094410] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe606000
[ 3.138500] ata8.00: ATAPI: HL-DT-ST DVDRAM GSA-H42L, SL01, max UDMA/66
[ 3.138505] ata8.00: limited to UDMA/33 due to 40-wire cable
[ 3.144487] ata8.00: configured for UDMA/33
[ 3.149095] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.149097] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.149099] usb usb10: Product: OHCI PCI host controller
[ 3.149100] usb usb10: Manufacturer: Linux 3.19.4-1.g74c332b-desktop ohci_hcd
[ 3.149102] usb usb10: SerialNumber: 0000:00:14.5
[ 3.149227] hub 10-0:1.0: USB hub found
[ 3.149235] hub 10-0:1.0: 2 ports detected
[ 3.149449] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 3.149453] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
[ 3.149470] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe605000
[ 3.204186] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.204189] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.204191] usb usb11: Product: OHCI PCI host controller
[ 3.204192] usb usb11: Manufacturer: Linux 3.19.4-1.g74c332b-desktop ohci_hcd
[ 3.204193] usb usb11: SerialNumber: 0000:00:16.0
[ 3.204318] hub 11-0:1.0: USB hub found
[ 3.204325] hub 11-0:1.0: 4 ports detected
[ 3.206315] scsi host10: pata_atiixp
[ 3.206481] scsi host11: pata_atiixp
[ 3.206545] ata10: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 3.206548] ata11: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 3.226003] random: nonblocking pool is initialized
[ 3.265439] [drm] ring test on 5 succeeded in 1 usecs
[ 3.265444] [drm] UVD initialized successfully.
[ 3.265589] [drm] ib test on ring 0 succeeded in 0 usecs
[ 3.265620] [drm] ib test on ring 3 succeeded in 0 usecs
[ 3.294118] scsi 7:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H42L SL01 PQ: 0 ANSI: 5
[ 3.305739] scsi 7:0:0:0: Attached scsi generic sg2 type 5
[ 3.390828] ata10.00: ATA-9: WDC WD20EFRX-68EUZN0, 80.00A80, max UDMA/133
[ 3.390831] ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.390836] ata10.01: ATAPI: HL-DT-ST BD-RE BH10LS38, 1.01, max UDMA/133
[ 3.390839] ata10.00: limited to UDMA/33 due to 40-wire cable
[ 3.390841] ata10.01: limited to UDMA/33 due to 40-wire cable
[ 3.393829] ata10.00: configured for UDMA/33
[ 3.417522] usb 9-3: new low-speed USB device number 2 using ohci-pci
[ 3.417600] Switched to clocksource tsc
[ 3.431763] ata10.01: configured for UDMA/33
[ 3.456712] scsi 10:0:0:0: Direct-Access ATA WDC WD20EFRX-68E 0A80 PQ: 0 ANSI: 5
[ 3.456882] sd 10:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.456885] sd 10:0:0:0: [sdc] 4096-byte physical blocks
[ 3.456913] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 3.456944] sd 10:0:0:0: [sdc] Write Protect is off
[ 3.456947] sd 10:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.456970] sd 10:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.465681] scsi 10:0:1:0: CD-ROM HL-DT-ST BD-RE BH10LS38 1.01 PQ: 0 ANSI: 5
[ 3.482628] scsi 10:0:1:0: Attached scsi generic sg4 type 5
[ 3.494592] sdc: sdc1 sdc2 sdc3
[ 3.494914] sd 10:0:0:0: [sdc] Attached SCSI disk
[ 3.503994] sr 7:0:0:0: [sr0] scsi3-mmc drive: 78x/78x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.503997] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.504230] sr 7:0:0:0: Attached scsi CD-ROM sr0
[ 3.533986] sr 10:0:1:0: [sr1] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.534185] sr 10:0:1:0: Attached scsi CD-ROM sr1
[ 3.538808] firewire_core 0000:04:00.0: created device fw0: GUID 008f130078961100, S400
[ 3.566841] usb 9-3: New USB device found, idVendor=093a, idProduct=2510
[ 3.566844] usb 9-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.566846] usb 9-3: Product: USB Optical Mouse
[ 3.566848] usb 9-3: Manufacturer: PixArt
[ 3.574033] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb9/9-3/9-3:1.0/0003:093A:2510.0001/input/input1
[ 3.574130] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:13.0-3/input0
[ 3.938459] [drm] ib test on ring 5 succeeded
[ 3.938959] [drm] Radeon Display Connectors
[ 3.938961] [drm] Connector 0:
[ 3.938961] [drm] DP-1
[ 3.938962] [drm] HPD4
[ 3.938964] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 3.938965] [drm] Encoders:
[ 3.938966] [drm] DFP1: INTERNAL_UNIPHY2
[ 3.938966] [drm] Connector 1:
[ 3.938967] [drm] HDMI-A-1
[ 3.938968] [drm] HPD5
[ 3.938969] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 3.938970] [drm] Encoders:
[ 3.938970] [drm] DFP2: INTERNAL_UNIPHY2
[ 3.938971] [drm] Connector 2:
[ 3.938972] [drm] DVI-I-1
[ 3.938972] [drm] HPD1
[ 3.938974] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 3.938974] [drm] Encoders:
[ 3.938975] [drm] DFP3: INTERNAL_UNIPHY1
[ 3.938976] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 3.938976] [drm] Connector 3:
[ 3.938977] [drm] DVI-I-2
[ 3.938978] [drm] HPD6
[ 3.938979] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 3.938980] [drm] Encoders:
[ 3.938980] [drm] DFP4: INTERNAL_UNIPHY
[ 3.938981] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.011142] scsi 9:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 4.011376] sd 9:0:0:0: Attached scsi generic sg5 type 0
[ 4.012648] scsi 9:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 4.012837] sd 9:0:0:1: Attached scsi generic sg6 type 0
[ 4.013268] sd 9:0:0:0: [sdd] Attached SCSI removable disk
[ 4.014396] scsi 9:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 4.014650] sd 9:0:0:2: Attached scsi generic sg7 type 0
[ 4.016775] scsi 9:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0
[ 4.016958] sd 9:0:0:3: Attached scsi generic sg8 type 0
[ 4.027789] sd 9:0:0:1: [sde] Attached SCSI removable disk
[ 4.031293] sd 9:0:0:2: [sdf] Attached SCSI removable disk
[ 4.036929] sd 9:0:0:3: [sdg] Attached SCSI removable disk
[ 4.089394] [drm] fb mappable at 0xC045F000
[ 4.089396] [drm] vram apper at 0xC0000000
[ 4.089397] [drm] size 8294400
[ 4.089399] [drm] fb depth is 24
[ 4.089400] [drm] pitch is 7680
[ 4.089457] fbcon: radeondrmfb (fb0) is primary device
[ 4.110394] Console: switching to colour frame buffer device 240x67
[ 4.114325] radeon 0000:06:00.0: fb0: radeondrmfb frame buffer device
[ 4.114326] radeon 0000:06:00.0: registered panic notifier
[ 4.128364] [drm] Initialized radeon 2.40.0 20080528 for 0000:06:00.0 on minor 0
[ 4.526226] audit: type=1130 audit(1429251806.535:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.536832] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 4.536835] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 4.536838] PM: Marking nosave pages: [mem 0xbdf05000-0xbee28fff]
[ 4.536895] PM: Marking nosave pages: [mem 0xbee2a000-0xbf02ffff]
[ 4.536904] PM: Marking nosave pages: [mem 0xbf453000-0xbf7f3fff]
[ 4.536919] PM: Marking nosave pages: [mem 0xbf800000-0x100000fff]
[ 4.537488] PM: Marking nosave pages: [mem 0xb4000000-0xb7ffffff]
[ 4.537726] PM: Basic memory bitmaps created
[ 4.538460] PM: Basic memory bitmaps freed
[ 4.542151] PM: Starting manual resume from disk
[ 4.542155] PM: Hibernation image partition 8:34 present
[ 4.542156] PM: Looking for hibernation image.
[ 4.543119] PM: Image not found (code -22)
[ 4.543121] PM: Hibernation image not present or could not be loaded.
[ 4.665422] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.896172] systemd-journald[177]: Received SIGTERM from PID 1 (systemd).
[ 5.686963] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 6.324625] systemd-sysv-generator[491]: Overwriting existing symlink /run/systemd/generator.late/apparmor.service with real service
[ 6.324670] systemd-sysv-generator[491]: Overwriting existing symlink /run/systemd/generator.late/after.local.service with real service
[ 6.324691] systemd-sysv-generator[491]: Overwriting existing symlink /run/systemd/generator.late/raw.service with real service
[ 6.324711] systemd-sysv-generator[491]: Overwriting existing symlink /run/systemd/generator.late/cycle.service with real service
[ 6.324733] systemd-sysv-generator[491]: Overwriting existing symlink /run/systemd/generator.late/pppoe.service with real service
[ 6.324752] systemd-sysv-generator[491]: Overwriting existing symlink /run/systemd/generator.late/local.service with real service
[ 6.324770] systemd-sysv-generator[491]: Overwriting existing symlink /run/systemd/generator.late/nfs.service with real service
[ 6.324788] systemd-sysv-generator[491]: Overwriting existing symlink /run/systemd/generator.late/rpmconfigcheck.service with real service
[ 6.324806] systemd-sysv-generator[491]: Overwriting existing symlink /run/systemd/generator.late/cifs.service with real service
[ 6.324824] systemd-sysv-generator[491]: Overwriting existing symlink /run/systemd/generator.late/esound.service with real service
[ 6.324842] systemd-sysv-generator[491]: Overwriting existing symlink /run/systemd/generator.late/halt.local.service with real service
[ 7.018790] systemd[1]: Found dependency on sockets.target/start
[ 7.028804] systemd[1]: Found dependency on iscsid.socket/start
[ 7.038816] systemd[1]: Found dependency on sysinit.target/start
[ 7.048809] systemd[1]: Breaking ordering cycle by deleting job cycle.service/start
[ 7.058846] systemd[1]: Job cycle.service/start deleted to break ordering cycle starting with sysinit.target/start
[ 7.068874] systemd[1]: Found ordering cycle on sysinit.target/start
[ 7.078880] systemd[1]: Found dependency on apparmor.service/start
[ 7.088903] systemd[1]: Found dependency on basic.target/start
[ 7.098895] systemd[1]: Found dependency on sockets.target/start
[ 7.108932] systemd[1]: Found dependency on iscsid.socket/start
[ 7.118954] systemd[1]: Found dependency on sysinit.target/start
[ 7.128966] systemd[1]: Breaking ordering cycle by deleting job apparmor.service/start
[ 7.138991] systemd[1]: Job apparmor.service/start deleted to break ordering cycle starting with sysinit.target/start
[ 7.139657] audit_printk_skb: 90 callbacks suppressed
[ 7.139659] audit: type=1130 audit(1429251809.144:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.139672] audit: type=1131 audit(1429251809.144:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.139858] systemd[1]: Stopped Switch Root.
[ 7.139868] audit: type=1130 audit(1429251809.144:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.139878] audit: type=1131 audit(1429251809.144:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.140206] systemd[1]: Cannot find unit for notify message of PID 177.
[ 7.140231] systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
[ 7.140357] systemd[1]: Listening on udev Control Socket.
[ 7.140365] systemd[1]: Starting udev Control Socket.
[ 7.140417] systemd[1]: Listening on udev Kernel Socket.
[ 7.140424] systemd[1]: Starting udev Kernel Socket.
[ 7.140982] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.154840] systemd[1]: Starting Load Kernel Modules...
[ 7.155377] systemd[1]: Mounting Huge Pages File System...
[ 7.155499] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.155511] systemd[1]: Starting LVM2 metadata daemon socket.
[ 7.155641] audit: type=1130 audit(1429251809.160:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.155652] audit: type=1131 audit(1429251809.160:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.155708] systemd[1]: Stopped File System Check on /dev/disk/by-uuid/e1a30884-6a92-47d5-b135-c4190e8acec2.
[ 7.155720] audit: type=1130 audit(1429251809.160:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-e1a30884\x2d6a92\x2d47d5\x2db135\x2dc4190e8acec2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.155729] audit: type=1131 audit(1429251809.160:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-e1a30884\x2d6a92\x2d47d5\x2db135\x2dc4190e8acec2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.155738] systemd[1]: Stopping File System Check on /dev/disk/by-uuid/e1a30884-6a92-47d5-b135-c4190e8acec2...
[ 7.155826] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.155833] systemd[1]: Starting Journal Socket (/dev/log).
[ 7.155889] systemd[1]: Listening on Journal Audit Socket.
[ 7.155895] systemd[1]: Starting Journal Audit Socket.
[ 7.155940] systemd[1]: Reached target Remote File Systems (Pre).
[ 7.155947] systemd[1]: Starting Remote File Systems (Pre).
[ 7.155964] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.156429] systemd[1]: Started LVM2 metadata daemon.
[ 7.156474] audit: type=1130 audit(1429251809.161:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.156618] systemd[1]: Starting LVM2 metadata daemon...
[ 7.157084] systemd[1]: Mounting Debug File System...
[ 7.157277] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.157288] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.157354] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.157363] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 7.157806] systemd[1]: Started Device-mapper event daemon.
[ 7.157856] audit: type=1130 audit(1429251809.162:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dm-event comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.158002] systemd[1]: Starting Device-mapper event daemon...
[ 7.158479] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.170035] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.170115] systemd[1]: Reached target System Time Synchronized.
[ 7.170124] systemd[1]: Starting System Time Synchronized.
[ 7.170267] systemd[1]: Created slice User and Session Slice.
[ 7.170274] systemd[1]: Starting User and Session Slice.
[ 7.170316] systemd[1]: Reached target Slices.
[ 7.170322] systemd[1]: Starting Slices.
[ 7.170368] systemd[1]: Stopped target Switch Root.
[ 7.170377] systemd[1]: Stopping Switch Root.
[ 7.170417] systemd[1]: Stopped target Initrd Root File System.
[ 7.170423] systemd[1]: Stopping Initrd Root File System.
[ 7.170467] systemd[1]: Stopped target Initrd File Systems.
[ 7.170472] systemd[1]: Stopping Initrd File Systems.
[ 7.170904] systemd[1]: Starting Rule generator for /dev/root symlink...
[ 7.171017] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.171034] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.171557] systemd[1]: Starting udev Coldplug all Devices...
[ 7.171767] systemd[1]: Created slice system-getty.slice.
[ 7.171784] systemd[1]: Starting system-getty.slice.
[ 7.171852] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.171860] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.172257] systemd[1]: Starting File System Check on Root Device...
[ 7.186364] systemd[1]: Started Rule generator for /dev/root symlink.
[ 7.393237] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 7.441364] systemd[1]: Started Load Kernel Modules.
[ 7.441577] systemd[1]: Mounted FUSE Control File System.
[ 7.441621] systemd[1]: Mounted Configuration File System.
[ 7.482451] systemd[1]: Starting Apply Kernel Variables...
[ 7.504761] systemd[1]: Mounted Debug File System.
[ 7.504987] systemd[1]: Mounted Huge Pages File System.
[ 7.505191] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.519709] systemd[1]: Started udev Coldplug all Devices.
[ 7.520365] systemd[1]: Starting udev Wait for Complete Device Initialization...
[ 7.745215] systemd[1]: Started File System Check on Root Device.
[ 7.745846] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.764261] EXT4-fs (sdc1): re-mounted. Opts: acl,user_xattr
[ 7.764841] systemd[1]: Started Remount Root and Kernel File Systems.
[ 7.765058] systemd[1]: Started First Boot Wizard.
[ 7.765101] systemd[1]: Started Rebuild Hardware Database.
[ 7.765114] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 7.765493] systemd[1]: Starting Load/Save Random Seed...
[ 7.765559] systemd[1]: Started Create System Users.
[ 7.766054] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 7.819717] systemd[1]: Started Load/Save Random Seed.
[ 7.820404] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
[ 7.820586] systemd[1]: Starting Entropy Daemon based on the HAVEGE algorithm...
[ 7.820878] systemd[1]: Starting Journal Service...
[ 8.117965] systemd[1]: Received SIGRTMIN+20 from PID 258 (plymouthd).
[ 8.172678] systemd[1]: Started Create Static Device Nodes in /dev.
[ 8.172943] systemd[1]: Reached target Local File Systems (Pre).
[ 8.172951] systemd[1]: Starting Local File Systems (Pre).
[ 8.172969] systemd[1]: Mounted Lock Directory.
[ 8.172980] systemd[1]: Mounted Runtime Directory.
[ 8.173422] systemd[1]: Starting udev Kernel Device Manager...
[ 8.527880] systemd[1]: Started Journal Service.
[ 8.687278] systemd-journald[536]: Received request to flush runtime journal from PID 1
[ 11.145366] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 11.145389] ACPI: acpi_idle registered with cpuidle
[ 11.145409] ACPI: Power Button [PWRB]
[ 11.145471] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 11.145506] ACPI: Power Button [PWRF]
[ 11.274306] acpi-cpufreq: overriding BIOS provided _PSD data
[ 11.286149] wmi: Mapper loaded
[ 11.444242] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 11.655523] AVX version of gcm_enc/dec engaged.
[ 11.655526] AES CTR mode by8 optimization enabled
[ 11.738356] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.816289] MCE: In-kernel MCE decoding enabled.
[ 11.816522] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 11.816622] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 11.914426] EDAC MC: Ver: 3.0.0
[ 12.222297] AMD64 EDAC driver v3.4.0
[ 12.222325] EDAC amd64: DRAM ECC disabled.
[ 12.222340] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 12.287338] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 12.287508] sp5100_tco: PCI Revision ID: 0x42
[ 12.287556] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 12.287569] sp5100_tco: Last reboot was not triggered by watchdog.
[ 12.287710] sp5100_tco: initialized (0xffffc900018f2b00). heartbeat=60 sec (nowayout=0)
[ 12.664511] device-mapper: uevent: version 1.0.3
[ 12.664658] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 12.721578] pps_core: LinuxPPS API ver. 1 registered
[ 12.721581] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 12.722064] kvm: Nested Virtualization enabled
[ 12.722071] kvm: Nested Paging enabled
[ 12.741272] PTP clock support registered
[ 12.755852] tg3.c:v3.137 (May 11, 2014)
[ 12.778905] tg3 0000:05:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:35:19:df
[ 12.778910] tg3 0000:05:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 12.778914] tg3 0000:05:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 12.778917] tg3 0000:05:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 12.784596] Linux video capture interface: v2.00
[ 12.833706] snd_emu10k1 0000:0a:00.0: Audigy2 value: Special config.
[ 12.887515] tg3 0000:05:00.0 enp5s0: renamed from eth0
[ 13.104379] audit_printk_skb: 42 callbacks suppressed
[ 13.104385] audit: type=1130 audit(1429251815.098:65): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-b2589e78\x2dec57\x2d4811\x2d8d94\x2dc9a39bd387bc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 13.105145] audit: type=1130 audit(1429251815.099:66): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-81cf4fe3\x2d7634\x2d46f6\x2dbe16\x2d01fbc7f24e8a comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 13.107923] snd_hda_intel 0000:06:00.1: Handle VGA-switcheroo audio client
[ 13.233490] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0b.0/0000:06:00.1/sound/card2/input5
[ 13.297248] sound hdaudioC1D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 13.297259] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.297265] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 13.297269] sound hdaudioC1D0: mono: mono_out=0x0
[ 13.297273] sound hdaudioC1D0: dig-out=0x1e/0x0
[ 13.297276] sound hdaudioC1D0: inputs:
[ 13.297281] sound hdaudioC1D0: Front Mic=0x19
[ 13.297285] sound hdaudioC1D0: Rear Mic=0x18
[ 13.297289] sound hdaudioC1D0: Line=0x1a
[ 13.311522] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 13.314355] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 13.314636] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 13.315881] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 13.316054] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 13.316216] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 13.316382] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 13.316544] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 13.316809] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 13.322459] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 13.349653] cx88[0]: Your board isn't known (yet) to the driver. You can
cx88[0]: try to pick one of the existing card configs via
cx88[0]: card=<n> insmod option. Updating to the latest
cx88[0]: version might help as well.
[ [ 13.711445] audit: type=1130 audit(1429251815.705:67): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-87036d24\x2d77f0\x2d423d\x2dbe6f\x2d39816b5fb5c0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 13.829740] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
[ 14.504915] floppy0: no floppy controllers found
[ 14.752411] audit: type=1130 audit(1429251816.744:68): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 14.887479] audit: type=1130 audit(1429251816.879:69): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-activation-early comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 14.887519] audit: type=1131 audit(1429251816.879:70): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-activation-early comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 14.913758] audit: type=1130 audit(1429251816.905:71): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 14.913771] audit: type=1131 audit(1429251816.905:72): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 14.969892] audit: type=1130 audit(1429251816.961:73): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 14.969917] audit: type=1131 audit(1429251816.961:74): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 17.434252] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.605086] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 17.633851] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.368420] NET: Registered protocol family 17
[ 18.523634] No iBFT detected.
[ 18.748422] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 22.359273] tg3 0000:05:00.0 enp5s0: Link is up at 1000 Mbps, full duplex
[ 22.359298] tg3 0000:05:00.0 enp5s0: Flow control is on for TX and on for RX
[ 22.359303] tg3 0000:05:00.0 enp5s0: EEE is enabled
[ 22.359331] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[ 66.892359] UDF-fs: INFO Mounting volume 'VPM-39', timestamp 2010/04/02 17:33 (1078)
[ 70.440716] SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:be5f:f4ff:fe35:19df DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 71.443738] SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:be5f:f4ff:fe35:19df DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 73.449723] SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:be5f:f4ff:fe35:19df DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 75.891122] VFS: busy inodes on changed media or resized disk sr0
[ 77.457389] SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:be5f:f4ff:fe35:19df DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 81.881506] Bluetooth: Core ver 2.20
[ 81.881543] NET: Registered protocol family 31
[ 81.881547] Bluetooth: HCI device and connection manager initialized
[ 81.881555] Bluetooth: HCI socket layer initialized
[ 81.881561] Bluetooth: L2CAP socket layer initialized
[ 81.881574] Bluetooth: SCO socket layer initialized
[ 81.913729] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 81.913737] Bluetooth: BNEP filters: protocol multicast
[ 81.913746] Bluetooth: BNEP socket layer initialized
[ 82.171319] SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC=33:33:00:00:00:fb:c0:25:06:6e:b8:60:86:dd SRC=fe80:0000:0000:0000:c225:06ff:fe6e:b860 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=82 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=42
[ 101.281730] SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:be5f:f4ff:fe35:19df DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 102.823459] sr 7:0:0:0: [sr0] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 102.823469] sr 7:0:0:0: [sr0] Sense Key : Not Ready [current]
[ 102.823476] sr 7:0:0:0: [sr0] Add. Sense: Medium not present
[ 102.823480] sr 7:0:0:0: [sr0] CDB:
[ 102.823483] Read(10): 28 00 00 00 01 0b 00 00 01 00
[ 102.823498] blk_update_request: I/O error, dev sr0, sector 1068
[ 133.340566] SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:be5f:f4ff:fe35:19df DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 134.691404] sr 7:0:0:0: [sr0] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 134.691414] sr 7:0:0:0: [sr0] Sense Key : Not Ready [current]
[ 134.691420] sr 7:0:0:0: [sr0] Add. Sense: Medium not present
[ 134.691424] sr 7:0:0:0: [sr0] CDB:
[ 134.691427] Read(10): 28 00 00 00 01 0b 00 00 01 00
[ 134.691442] blk_update_request: I/O error, dev sr0, sector 1068
[ 134.704662] sr 7:0:0:0: [sr0] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 134.704671] sr 7:0:0:0: [sr0] Sense Key : Not Ready [current]
[ 134.704677] sr 7:0:0:0: [sr0] Add. Sense: Medium not present
[ 134.704681] sr 7:0:0:0: [sr0] CDB:
[ 134.704684] Read(10): 28 00 00 00 01 0b 00 00 01 00
[ 134.704698] blk_update_request: I/O error, dev sr0, sector 1068
[ 134.717502] sr 7:0:0:0: [sr0] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 134.717511] sr 7:0:0:0: [sr0] Sense Key : Not Ready [current]
[ 134.717517] sr 7:0:0:0: [sr0] Add. Sense: Medium not present
[ 134.717521] sr 7:0:0:0: [sr0] CDB:
[ 134.717523] Read(10): 28 00 00 00 01 0b 00 00 01 00
[ 134.717537] blk_update_request: I/O error, dev sr0, sector 1068
[ 134.730595] sr 7:0:0:0: [sr0] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 134.730605] sr 7:0:0:0: [sr0] Sense Key : Not Ready [current]
[ 134.730613] sr 7:0:0:0: [sr0] Add. Sense: Medium not present
[ 134.730618] sr 7:0:0:0: [sr0] CDB:
[ 134.730621] Read(10): 28 00 00 00 01 0b 00 00 01 00
[ 134.730641] blk_update_request: I/O error, dev sr0, sector 1068
[ 134.743698] sr 7:0:0:0: [sr0] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 134.743707] sr 7:0:0:0: [sr0] Sense Key : Not Ready [current]
[ 134.743713] sr 7:0:0:0: [sr0] Add. Sense: Medium not present
[ 134.743717] sr 7:0:0:0: [sr0] CDB:
[ 134.743720] Read(10): 28 00 00 00 01 0b 00 00 01 00
[ 134.743733] blk_update_request: I/O error, dev sr0, sector 1068
[ 135.037999] sr 7:0:0:0: [sr0] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 135.038009] sr 7:0:0:0: [sr0] Sense Key : Not Ready [current]
[ 135.038016] sr 7:0:0:0: [sr0] Add. Sense: Medium not present
[ 135.038019] sr 7:0:0:0: [sr0] CDB:
[ 135.038023] Read(10): 28 00 00 00 01 0b 00 00 01 00
[ 135.038037] blk_update_request: I/O error, dev sr0, sector 1068
[ 135.051118] sr 7:0:0:0: [sr0] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 135.051127] sr 7:0:0:0: [sr0] Sense Key : Not Ready [current]
[ 135.051133] sr 7:0:0:0: [sr0] Add. Sense: Medium not present
[ 135.051137] sr 7:0:0:0: [sr0] CDB:
[ 135.051140] Read(10): 28 00 00 00 01 0b 00 00 01 00
[ 135.051154] blk_update_request: I/O error, dev sr0, sector 1068
[ 135.064036] sr 7:0:0:0: [sr0] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 135.064041] sr 7:0:0:0: [sr0] Sense Key : Not Ready [current]
[ 135.064045] sr 7:0:0:0: [sr0] Add. Sense: Medium not present
[ 135.064047] sr 7:0:0:0: [sr0] CDB:
[ 135.064048] Read(10): 28 00 00 00 01 0b 00 00 01 00
[ 135.064056] blk_update_request: I/O error, dev sr0, sector 1068
[ 135.077089] sr 7:0:0:0: [sr0] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 135.077098] sr 7:0:0:0: [sr0] Sense Key : Not Ready [current]
[ 135.077105] sr 7:0:0:0: [sr0] Add. Sense: Medium not present
[ 135.077109] sr 7:0:0:0: [sr0] CDB:
[ 135.077111] Read(10): 28 00 00 00 01 0b 00 00 01 00
[ 135.077126] blk_update_request: I/O error, dev sr0, sector 1068
[ 135.090132] sr 7:0:0:0: [sr0] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 135.090141] sr 7:0:0:0: [sr0] Sense Key : Not Ready [current]
[ 135.090148] sr 7:0:0:0: [sr0] Add. Sense: Medium not present
[ 135.090151] sr 7:0:0:0: [sr0] CDB:
[ 135.090154] Read(10): 28 00 00 00 01 0b 00 00 01 00
[ 135.090168] blk_update_request: I/O error, dev sr0, sector 1068
[ 142.276416] SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC=33:33:00:00:00:fb:c0:25:06:6e:b8:60:86:dd SRC=fe80:0000:0000:0000:c225:06ff:fe6e:b860 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=82 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=42
[ 197.471976] SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:be5f:f4ff:fe35:19df DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 322.601471] SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC=33:33:00:00:00:fb:c0:25:06:6e:b8:60:86:dd SRC=fe80:0000:0000:0000:c225:06ff:fe6e:b860 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=82 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=42
[ 322.616111] SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC=33:33:00:00:00:fb:c0:25:06:6e:b8:60:86:dd SRC=fe80:0000:0000:0000:c225:06ff:fe6e:b860 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=96 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=56
[ 322.617412] SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC=33:33:00:00:00:fb:c0:25:06:6e:b8:60:86:dd SRC=fe80:0000:0000:0000:c225:06ff:fe6e:b860 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=82 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=42
[ 325.756065] SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:be5f:f4ff:fe35:19df DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 582.241711] SFW2-INext-DROP-DEFLT IN=enp5s0 OUT= MAC= SRC=fe80:0000:0000:0000:be5f:f4ff:fe35:19df DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[ 830.720532] usb 2-2: new high-speed USB device number 3 using ehci-pci
[ 830.837164] usb 2-2: New USB device found, idVendor=0482, idProduct=040a
[ 830.837170] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 830.837174] usb 2-2: Product: Kyocera FS-C5150DN
[ 830.837177] usb 2-2: Manufacturer: Kyocera
[ 830.837179] usb 2-2: SerialNumber: Q521924456
[ 830.905369] usblp 2-2:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x0482 pid 0x040A
[ 830.905400] usbcore: registered new interface driver usblp
