Heinz-Peter
Guru
Hallo!
Ich habe hier eine externe ATA Festplatte die am USB Bus hängt.
Die FP ist in einem Gehäuse in dem auch der ATA-USB Adapter (keine Ahnung wie das Ding heißt richtig) eingebaut ist.
Die FP hat eine Primäre Partition mit FAT32 und eine Erweiterte Partition.
Auf der Erweiterte sind 2 Partitionen, eine FAT32 und eine Ext4.
mount | grep -i sde
Ich möchte die FP mit smartctl auslesen aber es klappt nicht.
Hat jemand eine Idee?
Hier meine Versuche;
smartctl -a /dev/sde1
smartctl -a /dev/sde1
Danke im Voraus für Eure Hilfe
Grüße Heinz-Peter
Ich habe hier eine externe ATA Festplatte die am USB Bus hängt.
Die FP ist in einem Gehäuse in dem auch der ATA-USB Adapter (keine Ahnung wie das Ding heißt richtig) eingebaut ist.
Die FP hat eine Primäre Partition mit FAT32 und eine Erweiterte Partition.
Auf der Erweiterte sind 2 Partitionen, eine FAT32 und eine Ext4.
mount | grep -i sde
Code:
/dev/sde1 on /run/media/bbb/MAXTOR_FP type vfat (rw,nosuid,nodev,relatime,uid=1000,gid=100,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro,uhelper=udisks2)
/dev/sde1 on /var/run/media/bbb/MAXTOR_FP type vfat (rw,nosuid,nodev,relatime,uid=1000,gid=100,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro)
/dev/sde5 on /run/media/bbb/MAXTOR_2 type vfat (rw,nosuid,nodev,relatime,uid=1000,gid=100,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro,uhelper=udisks2)
/dev/sde5 on /var/run/media/bbb/MAXTOR_2 type vfat (rw,nosuid,nodev,relatime,uid=1000,gid=100,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro)
/dev/sde6 on /run/media/bbb/MAXTOR_R type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sde6 on /var/run/media/bbb/MAXTOR_R type ext4 (rw,nosuid,nodev,relatime,data=ordered)
Hat jemand eine Idee?
Hier meine Versuche;
smartctl -a /dev/sde1
Code:
smartctl 6.0 2012-10-10 r3643 [i686-linux-3.7.10-1.28-default] (SUSE RPM)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
Vendor: Maxtor 6
Product: L160P0
Revision: BAJ4
User Capacity: 163.928.605.184 bytes [163 GB]
Logical block size: 512 bytes
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
>> Terminate command early due to bad response to IEC mode page
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
Code:
smartctl 6.0 2012-10-10 r3643 [i686-linux-3.7.10-1.28-default] (SUSE RPM)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, http://www.smartmontools.org
Vendor: Maxtor 6
Product: L160P0
Revision: BAJ4
User Capacity: 163.928.605.184 bytes [163 GB]
Logical block size: 512 bytes
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
>> Terminate command early due to bad response to IEC mode page
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
Danke im Voraus für Eure Hilfe
Grüße Heinz-Peter