Nach einem Update erscheint bei mir ebenfalls die hier genannte Fehlermeldung!
Die Ausgabe von:
Ich habe den hp-doctor ausgeführt und die Fehlermeldungen wurden behoben bzw. fehlende Files installiert. Jetzt kommt dort nur noch die Fehlermeldung: warning: "Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices."
Die Fehlermeldung "no system tray detected" kommt aber immernoch nach einem Neustart.
Beim direkten Aufrufen von "hp-systray" über den Terminal kommt folgende Meldung: "warning: No hp: or hpfax: devices found in any installed CUPS queue. Exiting."
Das Verzeichnis: "/usr/bin/hp-systray" ist bei mir leer. Wie kann ich meinen Systemabschnitt dort hineinlegen bzw. wie kann ich das Problem lösen, dass die o.g. Fehlermeldung nicht mehr erscheint.
Lieben Dank schon mal für sachdienliche Hinweise!
Open Suse Tumbleweed
KDE Plasma 5.3.0
Kernel 4.0.3-1
hplib 3.15.2-123.2
Die Ausgabe von:
Code:
hp-check -t
Saving output in log file: /home/xxx/hp-check.log
HP Linux Imaging and Printing System (ver. 3.15.2)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to
successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper
dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: suse-20150516 version is not supported. Using suse-13.2 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.0.3-1.g3ee3773-desktop #1 SMP PREEMPT Wed May 13 13:41:19 UTC 2015 (3ee3773) GNU/Linux
Host: linux-5az8
Proc: 4.0.3-1.g3ee3773-desktop #1 SMP PREEMPT Wed May 13 13:41:19 UTC 2015 (3ee3773) GNU/Linux
Distribution: suse 20150516
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.15.2
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for suse distro 20150516 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.15.2
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/cups/model/manufacturer-PPDs/hplip
ppdbase=/usr/share/cups/model/manufacturer-PPDs
doc=/usr/share/doc/packages/hplip
html==/usr/share/doc/packages/hplip
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/lib/cups/driver
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=no
cups-ppd-install=yes
internal-tag=3.15.2
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: Datei oder Verzeichnis nicht gefunden
Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
latest_available_version = 3.13.11
notify_upgrade = false
last_upgraded_time = 1427811709
pending_upgrade_time = 0
[settings]
systray_visible = 1
systray_messages = 0
[last_used]
device_uri =
printer_name =
working_dir = .
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
[installation]
date_time = 17.05.2015 20:33:25
version = 3.15.2
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.16 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.24 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.998 OK -
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.0.2 OK 'CUPS Scheduler is running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.112 OK -
network network -wget OPTIONAL - 1.16.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
dbus DBus - Message bus system REQUIRED - 1.8.16 OK -
-------------------------
| General Dependencies |
-------------------------
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.0.1 OK -
python-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.0 OK -
reportlab Reportlab - PDF library for Python OPTIONAL 2.0 2.7 OK -
python-notify Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.11.3 OK -
python-xml Python XML libraries REQUIRED - 2.1.0 OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.0.2 OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK -
sane-devel SANE - Scanning library development files REQUIRED - 1.0.24 OK -
pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python2X Python 2.2 or greater - Python programming language REQUIRED 2.2 2.7.9 OK -
pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 REQUIRED 4.0 4.11.3 OK -
libjpeg libjpeg - JPEG library REQUIRED - - OK -
libpthread libpthread - POSIX threads library REQUIRED - 2.21 OK -
python-devel Python devel - Python development files REQUIRED 2.2 2.7.9 OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.0.2 OK -
sane SANE - Scanning library REQUIRED - 1.0.24 OK -
---------------
| COMPILEDEP |
---------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 4.8.3 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
----------------------
| Python Extentions |
----------------------
cupsext CUPS-Extension REQUIRED - 3.15.2 OK -
hpmudext IO-Extension REQUIRED - 3.15.2 OK -
-----------------------
| Scan Configuration |
-----------------------
scanext Scan-SANE-Extension REQUIRED - 3.15.2 OK -
hpaio HPLIP-SANE-Backend REQUIRED - 3.15.2 OK 'hpaio found in /etc/sane.d/dll.conf'
-----------------------
| Other Dependencies |
-----------------------
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
kyocerafsc5150dn
----------------
Type: Unknown
Device URI: usb://Kyocera/FS-C5150DN
PPD: /etc/cups/ppd/kyocerafsc5150dn.ppd
PPD Description: Kyocera FS-C5150DN (KPDL)
Printer status: printer kyocerafsc5150dn is idle. enabled since Mi 06 Mai 2015 11:11:57 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
None
Missing Optional Dependencies
-----------------------------
None
Total Errors: 0
Total Warnings: 1
Done.Ich habe den hp-doctor ausgeführt und die Fehlermeldungen wurden behoben bzw. fehlende Files installiert. Jetzt kommt dort nur noch die Fehlermeldung: warning: "Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices."
Die Fehlermeldung "no system tray detected" kommt aber immernoch nach einem Neustart.
Beim direkten Aufrufen von "hp-systray" über den Terminal kommt folgende Meldung: "warning: No hp: or hpfax: devices found in any installed CUPS queue. Exiting."
Das Verzeichnis: "/usr/bin/hp-systray" ist bei mir leer. Wie kann ich meinen Systemabschnitt dort hineinlegen bzw. wie kann ich das Problem lösen, dass die o.g. Fehlermeldung nicht mehr erscheint.
Lieben Dank schon mal für sachdienliche Hinweise!
Open Suse Tumbleweed
KDE Plasma 5.3.0
Kernel 4.0.3-1
hplib 3.15.2-123.2
