cat /var/log/Xorg.0.log
[ 14.274]
X.Org X Server 1.13.2
Release Date: 2013-01-24
[ 14.274] X Protocol Version 11, Revision 0
[ 14.274] Build Operating System: openSUSE SUSE LINUX
[ 14.274] Current Operating System: Linux linux-rzay.site 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) x86_64
[ 14.274] Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246JD1B300972-part2 apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x31a
[ 14.274] Build Date: 15 July 2013 12:22:00PM
[ 14.274]
[ 14.274] Current version of pixman: 0.28.2
[ 14.274] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 14.274] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 14.274] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 20 08:27:54 2013
[ 14.275] (==) Using config file: "/etc/X11/xorg.conf.install"
[ 14.275] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 14.275] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 14.460] (==) ServerLayout "Layout"
[ 14.460] (**) |-->Screen "vboxvideo" (0)
[ 14.460] (**) | |-->Monitor "<default monitor>"
[ 14.460] (**) | |-->Device "vboxvideo"
[ 14.460] (==) No monitor specified for screen "vboxvideo".
Using a default monitor configuration.
[ 14.460] (**) |-->Screen "vmware" (1)
[ 14.460] (**) | |-->Monitor "<default monitor>"
[ 14.461] (**) | |-->Device "vmware"
[ 14.461] (==) No monitor specified for screen "vmware".
Using a default monitor configuration.
[ 14.461] (**) |-->Screen "cirrus" (2)
[ 14.461] (**) | |-->Monitor "<default monitor>"
[ 14.461] (**) | |-->Device "cirrus"
[ 14.461] (==) No monitor specified for screen "cirrus".
Using a default monitor configuration.
[ 14.461] (**) |-->Screen "fbdev" (3)
[ 14.461] (**) | |-->Monitor "<default monitor>"
[ 14.461] (**) | |-->Device "fbdev"
[ 14.461] (==) No monitor specified for screen "fbdev".
Using a default monitor configuration.
[ 14.461] (**) |-->Screen "vesa" (4)
[ 14.461] (**) | |-->Monitor "<default monitor>"
[ 14.461] (**) | |-->Device "vesa"
[ 14.461] (==) No monitor specified for screen "vesa".
Using a default monitor configuration.
[ 14.461] (==) Automatically adding devices
[ 14.461] (==) Automatically enabling devices
[ 14.461] (==) Automatically adding GPU devices
[ 14.653] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 14.653] Entry deleted from font path.
[ 14.653] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 14.653] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
[ 14.653] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14.653] (II) Loader magic: 0x801c20
[ 14.653] (II) Module ABI versions:
[ 14.653] X.Org ANSI C Emulation: 0.4
[ 14.653] X.Org Video Driver: 13.1
[ 14.653] X.Org XInput driver : 18.0
[ 14.654] X.Org Server Extension : 7.0
[ 14.655] (--) PCI:*(0:4:0:0) 10de:0641:196d:0000 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288
[ 14.655] (II) Open ACPI successful (/var/run/acpid.socket)
[ 14.655] Initializing built-in extension Generic Event Extension
[ 14.655] Initializing built-in extension SHAPE
[ 14.655] Initializing built-in extension MIT-SHM
[ 14.655] Initializing built-in extension XInputExtension
[ 14.655] Initializing built-in extension XTEST
[ 14.656] Initializing built-in extension BIG-REQUESTS
[ 14.656] Initializing built-in extension SYNC
[ 14.656] Initializing built-in extension XKEYBOARD
[ 14.656] Initializing built-in extension XC-MISC
[ 14.656] Initializing built-in extension SECURITY
[ 14.656] Initializing built-in extension XINERAMA
[ 14.656] Initializing built-in extension XFIXES
[ 14.656] Initializing built-in extension RENDER
[ 14.656] Initializing built-in extension RANDR
[ 14.656] Initializing built-in extension COMPOSITE
[ 14.656] Initializing built-in extension DAMAGE
[ 14.656] Initializing built-in extension MIT-SCREEN-SAVER
[ 14.656] Initializing built-in extension DOUBLE-BUFFER
[ 14.656] Initializing built-in extension RECORD
[ 14.656] Initializing built-in extension DPMS
[ 14.656] Initializing built-in extension X-Resource
[ 14.656] Initializing built-in extension XVideo
[ 14.656] Initializing built-in extension XVideo-MotionCompensation
[ 14.656] Initializing built-in extension XFree86-VidModeExtension
[ 14.656] Initializing built-in extension XFree86-DGA
[ 14.656] Initializing built-in extension XFree86-DRI
[ 14.656] Initializing built-in extension DRI2
[ 14.656] (II) "glx" will be loaded by default.
[ 14.656] (II) LoadModule: "dri2"
[ 14.656] (II) Module "dri2" already built-in
[ 14.656] (II) LoadModule: "glamoregl"
[ 14.670] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 15.687] (EE) Failed to load /usr/lib64/xorg/modules/libglamoregl.so: /usr/lib64/xorg/modules/libglamoregl.so: undefined symbol: _glapi_tls_Context
[ 15.687] (II) UnloadModule: "glamoregl"
[ 15.687] (II) Unloading glamoregl
[ 15.687] (EE) Failed to load module "glamoregl" (loader failed, 7)
[ 15.687] (II) LoadModule: "glx"
[ 15.688] (II) Loading /usr/lib64/xorg/modules/updates/extensions/libglx.so
[ 16.103] (II) Module glx: vendor="NVIDIA Corporation"
[ 16.103] compiled for 4.0.2, module version = 1.0.0
[ 16.103] Module class: X.Org Server Extension
[ 16.103] (II) NVIDIA GLX Module 304.88 Wed Mar 27 14:46:57 PDT 2013
[ 16.103] Loading extension GLX
[ 16.103] (II) LoadModule: "vboxvideo"
[ 16.115] (WW) Warning, couldn't open module vboxvideo
[ 16.115] (II) UnloadModule: "vboxvideo"
[ 16.115] (II) Unloading vboxvideo
[ 16.115] (EE) Failed to load module "vboxvideo" (module does not exist, 0)
[ 16.115] (II) LoadModule: "vmware"
[ 16.116] (II) Loading /usr/lib64/xorg/modules/drivers/vmware_drv.so
[ 16.266] (II) Module vmware: vendor="X.Org Foundation"
[ 16.266] compiled for 1.13.1, module version = 13.0.0
[ 16.266] Module class: X.Org Video Driver
[ 16.266] ABI class: X.Org Video Driver, version 13.1
[ 16.266] (II) LoadModule: "cirrus"
[ 16.267] (II) Loading /usr/lib64/xorg/modules/drivers/cirrus_drv.so
[ 16.277] (II) Module cirrus: vendor="X.Org Foundation"
[ 16.277] compiled for 1.13.1, module version = 1.5.2
[ 16.277] Module class: X.Org Video Driver
[ 16.277] ABI class: X.Org Video Driver, version 13.1
[ 16.277] (II) LoadModule: "fbdev"
[ 16.278] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 16.278] (II) Module fbdev: vendor="X.Org Foundation"
[ 16.278] compiled for 1.13.1, module version = 0.4.3
[ 16.278] Module class: X.Org Video Driver
[ 16.278] ABI class: X.Org Video Driver, version 13.1
[ 16.278] (II) LoadModule: "vesa"
[ 16.279] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 16.279] (II) Module vesa: vendor="X.Org Foundation"
[ 16.279] compiled for 1.13.1, module version = 2.3.2
[ 16.279] Module class: X.Org Video Driver
[ 16.279] ABI class: X.Org Video Driver, version 13.1
[ 16.279] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
[ 16.279] (II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
CL-GD5465, CL-GD7548, CL-GD7555, CL-GD7556
[ 16.279] (II) FBDEV: driver for framebuffer: fbdev
[ 16.279] (II) VESA: driver for VESA chipsets: vesa
[ 16.279] (++) using VT number 7
[ 16.279] (WW) Falling back to old probe method for cirrus
[ 16.280] (II) Loading sub module "fbdevhw"
[ 16.280] (II) LoadModule: "fbdevhw"
[ 16.280] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 16.280] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 16.280] compiled for 1.13.2, module version = 0.0.2
[ 16.280] ABI class: X.Org Video Driver, version 13.1
[ 16.280] (**) FBDEV(0): claimed PCI slot 4@0:0:0
[ 16.280] (II) FBDEV(0): using default device
[ 16.281] (WW) Falling back to old probe method for vesa
[ 16.281] (II) FBDEV(0): Creating default Display subsection in Screen section
"fbdev" for depth/fbbpp 16/16
[ 16.281] (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
[ 16.281] (==) FBDEV(0): RGB weight 565
[ 16.281] (==) FBDEV(0): Default visual is TrueColor
[ 16.281] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 16.281] (II) FBDEV(0): hardware: VESA VGA (video memory: 5120kB)
[ 16.281] (II) FBDEV(0): checking modes against framebuffer device...
[ 16.281] (II) FBDEV(0): checking modes against monitor...
[ 16.281] (--) FBDEV(0): Virtual size is 1280x1024 (pitch 1280)
[ 16.281] (**) FBDEV(0): Built-in mode "current": 131.1 MHz, 80.3 kHz, 76.6 Hz
[ 16.281] (II) FBDEV(0): Modeline "current"x0.0 131.09 1280 1312 1472 1632 1024 1028 1032 1048 -hsync -vsync -csync (80.3 kHz b)
[ 16.281] (==) FBDEV(0): DPI set to (96, 96)
[ 16.281] (II) Loading sub module "fb"
[ 16.281] (II) LoadModule: "fb"
[ 16.281] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 16.282] (II) Module fb: vendor="X.Org Foundation"
[ 16.282] compiled for 1.13.2, module version = 1.0.0
[ 16.282] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.282] (**) FBDEV(0): using shadow framebuffer
[ 16.282] (II) Loading sub module "shadow"
[ 16.282] (II) LoadModule: "shadow"
[ 16.282] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[ 16.286] (II) Module shadow: vendor="X.Org Foundation"
[ 16.286] compiled for 1.13.2, module version = 1.1.0
[ 16.286] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.286] (II) UnloadModule: "vmware"
[ 16.286] (II) Unloading vmware
[ 16.302] (II) UnloadModule: "cirrus"
[ 16.302] (II) Unloading cirrus
[ 16.302] (II) UnloadModule: "vesa"
[ 16.302] (II) Unloading vesa
[ 16.302] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 16.302] (==) FBDEV(0): Backing store disabled
[ 16.302] (==) FBDEV(0): DPMS enabled
[ 16.302] (==) RandR enabled
[ 16.312] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 16.731] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 16.731] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.731] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.731] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 16.731] (II) LoadModule: "evdev"
[ 16.731] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 16.748] (II) Module evdev: vendor="X.Org Foundation"
[ 16.748] compiled for 1.13.1, module version = 2.7.3
[ 16.748] Module class: X.Org XInput Driver
[ 16.748] ABI class: X.Org XInput driver, version 18.0
[ 16.748] (II) Using input driver 'evdev' for 'Power Button'
[ 16.748] (**) Power Button: always reports core events
[ 16.748] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 16.749] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.749] (--) evdev: Power Button: Found keys
[ 16.749] (II) evdev: Power Button: Configuring as keyboard
[ 16.749] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 16.749] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.749] (**) Option "xkb_rules" "evdev"
[ 16.749] (**) Option "xkb_model" "evdev"
[ 16.749] (**) Option "xkb_layout" "de"
[ 16.749] (**) Option "xkb_variant" "nodeadkeys"
[ 16.793] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 16.793] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.793] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.793] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 16.793] (II) Using input driver 'evdev' for 'Power Button'
[ 16.793] (**) Power Button: always reports core events
[ 16.793] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 16.793] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.793] (--) evdev: Power Button: Found keys
[ 16.793] (II) evdev: Power Button: Configuring as keyboard
[ 16.793] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 16.793] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.793] (**) Option "xkb_rules" "evdev"
[ 16.793] (**) Option "xkb_model" "evdev"
[ 16.793] (**) Option "xkb_layout" "de"
[ 16.793] (**) Option "xkb_variant" "nodeadkeys"
[ 16.794] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event5)
[ 16.794] (II) No input driver specified, ignoring this device.
[ 16.794] (II) This device may have been added with another device file.
[ 16.794] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[ 16.794] (II) No input driver specified, ignoring this device.
[ 16.794] (II) This device may have been added with another device file.
[ 16.794] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[ 16.794] (II) No input driver specified, ignoring this device.
[ 16.794] (II) This device may have been added with another device file.
[ 16.794] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event8)
[ 16.794] (II) No input driver specified, ignoring this device.
[ 16.794] (II) This device may have been added with another device file.
[ 16.794] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event9)
[ 16.794] (II) No input driver specified, ignoring this device.
[ 16.794] (II) This device may have been added with another device file.
[ 16.795] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[ 16.795] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 16.795] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 16.795] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 16.795] (**) Logitech USB Optical Mouse: always reports core events
[ 16.795] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[ 16.795] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc018
[ 16.795] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 16.795] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 16.795] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 16.795] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 16.795] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 16.795] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 16.795] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 16.795] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.795] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1/event1"
[ 16.795] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[ 16.795] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 16.795] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 16.795] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 16.795] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 16.795] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 16.795] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 16.795] (II) No input driver specified, ignoring this device.
[ 16.795] (II) This device may have been added with another device file.
[ 16.796] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 16.796] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.796] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.796] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[ 16.796] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 16.796] (**) AT Translated Set 2 keyboard: always reports core events
[ 16.796] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 16.796] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 16.796] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 16.796] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 16.796] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 16.796] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 16.796] (**) Option "xkb_rules" "evdev"
[ 16.796] (**) Option "xkb_model" "evdev"
[ 16.796] (**) Option "xkb_layout" "de"
[ 16.796] (**) Option "xkb_variant" "nodeadkeys"
[ 16.796] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 16.796] (II) No input driver specified, ignoring this device.
[ 16.796] (II) This device may have been added with another device file.
[ 16.801] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 34.846] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 34.847] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 34.878] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
