Sendbote
Member
An ein Lenovo Notebook (R500) hatte ich unter Opensuse 11.3 den HP Laserjet 1020 angeschlossen. Er lief recht gut, später auch auf demselben Notebook unter Opensuse 12.2. Beide Male arbeitete ich mit dem KDE Desktop und die Installation ging über Yast / Konfiguration von Druckern / hp-setup ausführen. Tauchten Verbindungsprobleme auf, wurde ich manchmal mehrmals aufgefordert, das von HP bereitgestellte Plugin zu installieren, nachdem es bereits installiert war. Doch im allgemeinen lief der Drucker. Später funktionierte er unter 12.2 mit Problemen: Die Druckfunktion wurde hier öfter ohne ersichtlichen Grund angehalten, so dass erst oft der umständliche Weg über Yast, unter "Druckerkonfiguration" die Druckfunktion immer wieder zu aktivieren, Abhilfe schaffte.
Nun ersetzte ich Opensuse 12.2 mit 13.2, 64 bit (KDE Desktop 4.14.4), auch in der Hoffnung, dadurch die Druckerprobleme zu lösen. Ich installierte hplip 3.4.16.6 und dann den Drucker über "hp-setup ausführen". Doch der Laserjet 1020 läuft nicht richtig. Ich würde ihn gerne ohne Unterbrechungen in Betrieb nehmen können:
Der Drucker ist mit dem Notebook zur Zeit nur über das USB-Kabel verbunden. Die Verbindung geht also nicht über einen USB-Hub, der manchmal zu Störungen führt. Schalte ich den Drucker ein, um mit ihm zu drucken, tut sich nichts, obwohl das Betriebssystem unter "Benachrichtigungen und Aufgaben" meldet, dass der Printjob gestartet und dann ausgeführt
wurde ("hplaserjet1020 Print job has completed..."). Dasselbe passiert auch, wenn ich mit dem bereits eingeschalteten Drucker das Betriebsystem hochfahren lasse. Nach dem Aus- und Einschalten des Druckers, dem anschließenden Herausziehen und Wieder-Einstöpseln des USB-Kabels gibt der Drucker dann ein akustisches Lebenszeichen von sich und der Ausdruck funktioniert wieder.
Vielleicht sind nicht (richtig) vergebene Berechtigungen in der Firewall die Ursache des Problems? Ich gab in "Yast - Drucker - Konfiguration von Druckern / Drucker freigeben" die Option entfernten Zugriff erlauben an, und im Firewall-Menü trug ich unter "externer Zone / erweitert / TCP" die 631 als Schnittstelle ein. Das brachte keine Lösung des Problems. Zwischenzeitlich habe ich den Druckeranschluss gelöscht und ihn dann erneut über das hp-setup eingerichtet; als dies nicht erfolgreich war, die Druckverbindung wieder gelöscht und den Drucker mit Yast anschließen lassen. Das Problem ließ sich damit allerdings nicht beheben.
Ich hatte in der Chip Linux 1/2015 gelesen, bei Druckproblemen unter Linux sei oft die PPD-Datei fehlerhaft. Tatsächlich finde ich derzeit auf dem System keine PPD-Datei für den Laserjet 1020, allerdings auch nicht einen entprechenden Download auf den Internetseiten von HP.
Nun ließ ich gestern im HP-Device Manager die Option "download firmware" ausführen. Der Drucker gab ein akustisches Zeichen von sich. Doch das Problem bleibt bestehen.
Im HP Device-Manger unter "Configure / Preferences / Commands (Advanced) / Configure what commands to run for decvice actions"
findet sich nur ein Eintrag unter "Scan": /usr/bin/xsane -V %SANE_URI%
Müsste hier nicht auch ein Eintrag unter "Print" stehen? "Print" ist dort angegraut, also nicht wählbar.
Hier sind einige weitere Informationen:
Hier das Fehlerprotokoll zum Zeitpunkt der Einrichtung und das der vergangenen drei Tage:
Unterstützt HPLIP im Rahmen von Opensuse 13.2 nicht den HP Laserjet 1020?
Die Ergebnisse von
deuten darauf hin. (Diese Option lässt sich auch durch den HP Device Manager unter "Diagnose HPLIP Driver" ausführen):
Was könnte ich noch unternehmem?
- Unter Yast "Druckertreiberpakete installieren oder entfernen" bestimmte Treiberpakete entfernen und andere hinzufügen?
- Weiterhin nach der für den Laserjet 1020 passenden PPD-Datei suchen?
- Neuinstallation des Druckers über den Cups-Server versuchen?
- In der Datei "/etc/udev/rules.d/56-hpmud.rules" etwas ändern?
- Eine andere hplip-Version installieren (etwa Version Version: 3.15.2 oder gar eine frühere stabile Version)?
Über Hinweise würde ich mich freuen! Gruß Sendbote
Nun ersetzte ich Opensuse 12.2 mit 13.2, 64 bit (KDE Desktop 4.14.4), auch in der Hoffnung, dadurch die Druckerprobleme zu lösen. Ich installierte hplip 3.4.16.6 und dann den Drucker über "hp-setup ausführen". Doch der Laserjet 1020 läuft nicht richtig. Ich würde ihn gerne ohne Unterbrechungen in Betrieb nehmen können:
Der Drucker ist mit dem Notebook zur Zeit nur über das USB-Kabel verbunden. Die Verbindung geht also nicht über einen USB-Hub, der manchmal zu Störungen führt. Schalte ich den Drucker ein, um mit ihm zu drucken, tut sich nichts, obwohl das Betriebssystem unter "Benachrichtigungen und Aufgaben" meldet, dass der Printjob gestartet und dann ausgeführt
wurde ("hplaserjet1020 Print job has completed..."). Dasselbe passiert auch, wenn ich mit dem bereits eingeschalteten Drucker das Betriebsystem hochfahren lasse. Nach dem Aus- und Einschalten des Druckers, dem anschließenden Herausziehen und Wieder-Einstöpseln des USB-Kabels gibt der Drucker dann ein akustisches Lebenszeichen von sich und der Ausdruck funktioniert wieder.
Vielleicht sind nicht (richtig) vergebene Berechtigungen in der Firewall die Ursache des Problems? Ich gab in "Yast - Drucker - Konfiguration von Druckern / Drucker freigeben" die Option entfernten Zugriff erlauben an, und im Firewall-Menü trug ich unter "externer Zone / erweitert / TCP" die 631 als Schnittstelle ein. Das brachte keine Lösung des Problems. Zwischenzeitlich habe ich den Druckeranschluss gelöscht und ihn dann erneut über das hp-setup eingerichtet; als dies nicht erfolgreich war, die Druckverbindung wieder gelöscht und den Drucker mit Yast anschließen lassen. Das Problem ließ sich damit allerdings nicht beheben.
Ich hatte in der Chip Linux 1/2015 gelesen, bei Druckproblemen unter Linux sei oft die PPD-Datei fehlerhaft. Tatsächlich finde ich derzeit auf dem System keine PPD-Datei für den Laserjet 1020, allerdings auch nicht einen entprechenden Download auf den Internetseiten von HP.
Nun ließ ich gestern im HP-Device Manager die Option "download firmware" ausführen. Der Drucker gab ein akustisches Zeichen von sich. Doch das Problem bleibt bestehen.
Im HP Device-Manger unter "Configure / Preferences / Commands (Advanced) / Configure what commands to run for decvice actions"
findet sich nur ein Eintrag unter "Scan": /usr/bin/xsane -V %SANE_URI%
Müsste hier nicht auch ein Eintrag unter "Print" stehen? "Print" ist dort angegraut, also nicht wählbar.
Hier sind einige weitere Informationen:
Code:
xxx@linux-750h:~> /usr/sbin/hwinfo --printer
29: USB 00.0: 10900 Printer
[Created at usb.122]
Unique ID: hSuP.Be27IdE5tEA
Parent ID: pBe4.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0
SysFS BusID: 2-2:1.0
Hardware Class: printer
Model: "HP LaserJet 1020"
Hotplug: USB
Vendor: usb 0x03f0 "HP"
Device: usb 0x2b17 "HP LaserJet 1020"
Revision: "1.00"
Serial ID: "JL1CPLP"
Speed: 480 Mbps
Module Alias: "usb:v03F0p2B17d0100dc00dsc00dp00ic07isc01ip02in00"
Driver Info #0:
Driver Status: usblp is active
Driver Activation Cmd: "modprobe usblp"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #27 (Hub)
Hier das Fehlerprotokoll zum Zeitpunkt der Einrichtung und das der vergangenen drei Tage:
Code:
xxx@linux-750h:~> cat /var/log/cups/error_log | grep -v 'itle'
E [20/Jan/2015:19:48:59 +0900] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"!
E [20/Jan/2015:19:51:46 +0900] [Job 1] Job stopped due to filter errors; please consult the error_log file for details.
D [20/Jan/2015:19:51:46 +0900] [Job 1] The following messages were recorded from 19:51:40 to 19:51:46
D [20/Jan/2015:19:51:46 +0900] [Job 1] Adding start banner page "none".
D [20/Jan/2015:19:51:46 +0900] [Job 1] Queued on "hplaserjet1020" by "root".
D [20/Jan/2015:19:51:46 +0900] [Job 1] Auto-typing file...
D [20/Jan/2015:19:51:46 +0900] [Job 1] Request file type is application/postscript.
D [20/Jan/2015:19:51:46 +0900] [Job 1] File of type application/postscript queued by "root".
D [20/Jan/2015:19:51:46 +0900] [Job 1] Adding end banner page "none".
D [20/Jan/2015:19:51:46 +0900] [Job 1] job-sheets=none,none
D [20/Jan/2015:19:51:46 +0900] [Job 1] argv[0]="hplaserjet1020"
D [20/Jan/2015:19:51:46 +0900] [Job 1] argv[1]="1"
D [20/Jan/2015:19:51:46 +0900] [Job 1] argv[2]="root"
D [20/Jan/2015:19:51:46 +0900] [Job 1] argv[3]="YaST2testprint_hplaserjet1020"
D [20/Jan/2015:19:51:46 +0900] [Job 1] argv[4]="1"
D [20/Jan/2015:19:51:46 +0900] [Job 1] argv[5]="finishings=3 number-up=1 page-label=hplaserjet1020:YaST2testprint@linux-750h.site job-uuid=urn:uuid:b79d9377-754e-3343-7974-9d6cc5665b53 job-originating-host-name=localhost time-at-creation=1421751100 time-at-processing=1421751100"
D [20/Jan/2015:19:51:46 +0900] [Job 1] argv[6]="/var/spool/cups/d00001-001"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[2]="CUPS_DOCROOT=/usr/share/cups/webcontent"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[7]="CUPS_STATEDIR=/run/cups"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[8]="HOME=/var/spool/cups/tmp"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[10]="SERVER_ADMIN=root@linux-750h.site"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[11]="SOFTWARE=CUPS/1.5.4"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[13]="USER=root"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[14]="CUPS_MAX_MESSAGE=2047"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[17]="IPP_PORT=631"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[18]="CHARSET=utf-8"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[19]="LANG=en.UTF-8"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[20]="PPD=/etc/cups/ppd/hplaserjet1020.ppd"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[21]="RIP_MAX_CACHE=128m"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[22]="CONTENT_TYPE=application/postscript"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[23]="DEVICE_URI=hp:/usb/HP_LaserJet_1020?serial=JL1CPLP"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[24]="PRINTER_INFO=HP LaserJet 1020 hpijs, 3.14.6, requires proprietary plugin"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[25]="PRINTER_LOCATION="
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[26]="PRINTER=hplaserjet1020"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[27]="PRINTER_STATE_REASONS=none"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[28]="CUPS_FILETYPE=document"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[29]="FINAL_CONTENT_TYPE=printer/hplaserjet1020"
D [20/Jan/2015:19:51:46 +0900] [Job 1] envp[30]="AUTH_I****"
D [20/Jan/2015:19:51:46 +0900] [Job 1] Started filter /usr/lib/cups/filter/pstops (PID 3073)
D [20/Jan/2015:19:51:46 +0900] [Job 1] Started filter /usr/lib/cups/filter/foomatic-rip (PID 3074)
D [20/Jan/2015:19:51:46 +0900] [Job 1] Started backend /usr/lib/cups/backend/hp (PID 3075)
D [20/Jan/2015:19:51:46 +0900] [Job 1] Page = 612x792; 18,14 to 594,778
D [20/Jan/2015:19:51:46 +0900] [Job 1] slow_collate=0, slow_duplex=0, slow_order=0
D [20/Jan/2015:19:51:46 +0900] [Job 1] Before copy_comments - %!PS-Adobe-3.0
D [20/Jan/2015:19:51:46 +0900] [Job 1] %!PS-Adobe-3.0
D [20/Jan/2015:19:51:46 +0900] [Job 1] %%BoundingBox: 0 0 612 792
D [20/Jan/2015:19:51:46 +0900] [Job 1] %%Pages: 1
D [20/Jan/2015:19:51:46 +0900] [Job 1] %%LanguageLevel: 1
D [20/Jan/2015:19:51:46 +0900] [Job 1] %%DocumentData: Clean7Bit
D [20/Jan/2015:19:51:46 +0900] [Job 1] %%DocumentSuppliedResources: procset testprint/1.3
D [20/Jan/2015:19:51:46 +0900] [Job 1] %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [20/Jan/2015:19:51:46 +0900] [Job 1] %%Creator: Michael Sweet, Apple Inc. - adapted by openSUSE/Novell
D [20/Jan/2015:19:51:46 +0900] [Job 1] %%CreationDate: D:20090113092400+0800
D [20/Jan/2015:19:51:46 +0900] [Job 1] %%EndComments
D [20/Jan/2015:19:51:46 +0900] [Job 1] Before copy_prolog - %%BeginProlog
D [20/Jan/2015:19:51:46 +0900] [Job 1] Before copy_setup - %%Page: 1 1
D [20/Jan/2015:19:51:46 +0900] [Job 1] Before page loop - %%Page: 1 1
D [20/Jan/2015:19:51:46 +0900] [Job 1] Copying page 1...
D [20/Jan/2015:19:51:46 +0900] [Job 1] pagew = 576.0, pagel = 763.2
D [20/Jan/2015:19:51:46 +0900] [Job 1] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [20/Jan/2015:19:51:46 +0900] [Job 1] PageLeft = 18.0, PageRight = 594.0
D [20/Jan/2015:19:51:46 +0900] [Job 1] PageTop = 777.6, PageBottom = 14.4
D [20/Jan/2015:19:51:46 +0900] [Job 1] PageWidth = 612.0, PageLength = 792.0
D [20/Jan/2015:19:51:46 +0900] [Job 1] Wrote 1 pages...
D [20/Jan/2015:19:51:46 +0900] [Job 1] Calling FindDeviceById(cups-hplaserjet1020)
D [20/Jan/2015:19:51:46 +0900] [Job 1] Failed to send: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
D [20/Jan/2015:19:51:46 +0900] [Job 1] Failed to get find device cups-hplaserjet1020
D [20/Jan/2015:19:51:46 +0900] [Job 1] 'CM Color Calibration' Mode in SPOOLER-LESS: Off
D [20/Jan/2015:19:51:46 +0900] [Job 1] Getting input from file
D [20/Jan/2015:19:51:46 +0900] [Job 1] foomatic-rip version 1.0.58 running...
D [20/Jan/2015:19:51:46 +0900] [Job 1] Parsing PPD file ...
D [20/Jan/2015:19:51:46 +0900] [Job 1] Added option ColorSpace
D [20/Jan/2015:19:51:46 +0900] [Job 1] Added option Resolution
D [20/Jan/2015:19:51:46 +0900] [Job 1] Added option PageSize
D [20/Jan/2015:19:51:46 +0900] [Job 1] Added option Model
D [20/Jan/2015:19:51:46 +0900] [Job 1] Added option PrintoutMode
D [20/Jan/2015:19:51:46 +0900] [Job 1] Added option MediaType
D [20/Jan/2015:19:51:46 +0900] [Job 1] Added option InputSlot
D [20/Jan/2015:19:51:46 +0900] [Job 1] Added option Quality
D [20/Jan/2015:19:51:46 +0900] [Job 1] Added option ImageableArea
D [20/Jan/2015:19:51:46 +0900] [Job 1] Added option PaperDimension
D [20/Jan/2015:19:51:46 +0900] [Job 1] Added option Font
D [20/Jan/2015:19:51:46 +0900] [Job 1]
D [20/Jan/2015:19:51:46 +0900] [Job 1] Parameter Summary
D [20/Jan/2015:19:51:46 +0900] [Job 1] -----------------
D [20/Jan/2015:19:51:46 +0900] [Job 1]
D [20/Jan/2015:19:51:46 +0900] [Job 1] Spooler: cups
D [20/Jan/2015:19:51:46 +0900] [Job 1] Printer: hplaserjet1020
D [20/Jan/2015:19:51:46 +0900] [Job 1] Shell: /bin/bash
D [20/Jan/2015:19:51:46 +0900] [Job 1] PPD file: /etc/cups/ppd/hplaserjet1020.ppd
D [20/Jan/2015:19:51:46 +0900] [Job 1] ATTR file:
D [20/Jan/2015:19:51:46 +0900] [Job 1] Printer model: HP LaserJet 1020 hpijs, 3.14.6, requires proprietary plugin
D [20/Jan/2015:19:51:46 +0900] [Job 1] File(s) to be printed:
D [20/Jan/2015:19:51:46 +0900] [Job 1] <STDIN>
D [20/Jan/2015:19:51:46 +0900] [Job 1]
D [20/Jan/2015:19:51:46 +0900] [Job 1] Ghostscript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [20/Jan/2015:19:51:46 +0900] [Job 1] Printing system options:
D [20/Jan/2015:19:51:46 +0900] [Job 1] Pondering option 'finishings=3'
D [20/Jan/2015:19:51:46 +0900] [Job 1] Unknown option finishings=3.
D [20/Jan/2015:19:51:46 +0900] [Job 1] Pondering option 'number-up=1'
D [20/Jan/2015:19:51:46 +0900] [Job 1] Unknown option number-up=1.
D [20/Jan/2015:19:51:46 +0900] [Job 1] Pondering option 'page-label=hplaserjet1020:YaST2testprint@linux-750h.site'
D [20/Jan/2015:19:51:46 +0900] [Job 1] Unknown option page-label=hplaserjet1020:YaST2testprint@linux-750h.site.
D [20/Jan/2015:19:51:46 +0900] [Job 1] Pondering option 'job-uuid=urn:uuid:b79d9377-754e-3343-7974-9d6cc5665b53'
D [20/Jan/2015:19:51:46 +0900] [Job 1] Unknown option job-uuid=urn:uuid:b79d9377-754e-3343-7974-9d6cc5665b53.
D [20/Jan/2015:19:51:46 +0900] [Job 1] Pondering option 'job-originating-host-name=localhost'
D [20/Jan/2015:19:51:46 +0900] [Job 1] Unknown option job-originating-host-name=localhost.
D [20/Jan/2015:19:51:46 +0900] [Job 1] Pondering option 'time-at-creation=1421751100'
D [20/Jan/2015:19:51:46 +0900] [Job 1] Unknown option time-at-creation=1421751100.
D [20/Jan/2015:19:51:46 +0900] [Job 1] Pondering option 'time-at-processing=1421751100'
D [20/Jan/2015:19:51:46 +0900] [Job 1] Unknown option time-at-processing=1421751100.
D [20/Jan/2015:19:51:46 +0900] [Job 1] CM Color Calibration Mode in CUPS: Off
D [20/Jan/2015:19:51:46 +0900] [Job 1] Options from the PPD file:
D [20/Jan/2015:19:51:46 +0900] [Job 1]
D [20/Jan/2015:19:51:46 +0900] [Job 1] ================================================
D [20/Jan/2015:19:51:46 +0900] [Job 1]
D [20/Jan/2015:19:51:46 +0900] [Job 1] File: <STDIN>
D [20/Jan/2015:19:51:46 +0900] [Job 1]
D [20/Jan/2015:19:51:46 +0900] [Job 1] ================================================
D [20/Jan/2015:19:51:46 +0900] [Job 1]
D [20/Jan/2015:19:51:46 +0900] [Job 1] Filetype: PostScript
D [20/Jan/2015:19:51:46 +0900] [Job 1] Reading PostScript input ...
D [20/Jan/2015:19:51:46 +0900] [Job 1] --> This document is DSC-conforming!
D [20/Jan/2015:19:51:46 +0900] [Job 1] Found %RBINumCopies: 1
D [20/Jan/2015:19:51:46 +0900] [Job 1]
D [20/Jan/2015:19:51:46 +0900] [Job 1] -----------
D [20/Jan/2015:19:51:46 +0900] [Job 1] Found: %%BeginProlog
D [20/Jan/2015:19:51:46 +0900] [Job 1] Found: %%EndProlog
D [20/Jan/2015:19:51:46 +0900] [Job 1]
D [20/Jan/2015:19:51:46 +0900] [Job 1] -----------
D [20/Jan/2015:19:51:46 +0900] [Job 1] Found: %%BeginSetup
D [20/Jan/2015:19:51:46 +0900] [Job 1] Found: %%BeginFeature: *MediaType Plain
D [20/Jan/2015:19:51:46 +0900] [Job 1] Option: MediaType=Plain
D [20/Jan/2015:19:51:46 +0900] [Job 1] Setting option
D [20/Jan/2015:19:51:46 +0900] [Job 1] Found: %% FoomaticRIPOptionSetting: MediaType=Plain
D [20/Jan/2015:19:51:46 +0900] [Job 1] Option: MediaType=Plain
D [20/Jan/2015:19:51:46 +0900] [Job 1] Setting option
D [20/Jan/2015:19:51:46 +0900] [Job 1] Found: %%BeginFeature: *PageSize Letter
D [20/Jan/2015:19:51:46 +0900] [Job 1] Option: PageSize=Letter
D [20/Jan/2015:19:51:46 +0900] [Job 1] Setting option
D [20/Jan/2015:19:51:46 +0900] [Job 1] Found: %% FoomaticRIPOptionSetting: PageSize=Letter
D [20/Jan/2015:19:51:46 +0900] [Job 1] Option: PageSize=Letter
D [20/Jan/2015:19:51:46 +0900] [Job 1] Setting option
D [20/Jan/2015:19:51:46 +0900] [Job 1] Found: %%BeginFeature: *PrintoutMode Normal
D [20/Jan/2015:19:51:46 +0900] [Job 1] Option: PrintoutMode=Normal
D [20/Jan/2015:19:51:46 +0900] [Job 1] Setting option
D [20/Jan/2015:19:51:46 +0900] [Job 1] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
D [20/Jan/2015:19:51:46 +0900] [Job 1] Option: PrintoutMode=Normal
D [20/Jan/2015:19:51:46 +0900] [Job 1] Setting option
D [20/Jan/2015:19:51:46 +0900] [Job 1] Found: %%BeginFeature: *InputSlot Default
D [20/Jan/2015:19:51:46 +0900] [Job 1] Option: InputSlot=Default
D [20/Jan/2015:19:51:46 +0900] [Job 1] Setting option
D [20/Jan/2015:19:51:46 +0900] [Job 1] Found: %% FoomaticRIPOptionSetting: InputSlot=Default
D [20/Jan/2015:19:51:46 +0900] [Job 1] Option: InputSlot=Default
D [20/Jan/2015:19:51:46 +0900] [Job 1] Setting option
D [20/Jan/2015:19:51:46 +0900] [Job 1] Found: %%BeginFeature: *Quality FromPrintoutMode
D [20/Jan/2015:19:51:46 +0900] [Job 1] Option: Quality=FromPrintoutMode
D [20/Jan/2015:19:51:46 +0900] [Job 1] Setting option
D [20/Jan/2015:19:51:46 +0900] [Job 1] Found: %% FoomaticRIPOptionSetting: Quality=@PrintoutMode
D [20/Jan/2015:19:51:46 +0900] [Job 1] Option: Quality=FromPrintoutMode
D [20/Jan/2015:19:51:46 +0900] [Job 1] Setting option
D [20/Jan/2015:19:51:46 +0900] [Job 1] Found: %%EndSetup
D [20/Jan/2015:19:51:46 +0900] [Job 1] Inserting PostScript code for CUPS' page accounting
D [20/Jan/2015:19:51:46 +0900] [Job 1]
D [20/Jan/2015:19:51:46 +0900] [Job 1] -----------
D [20/Jan/2015:19:51:46 +0900] [Job 1] New page: %%Page: 1 1
D [20/Jan/2015:19:51:46 +0900] [Job 1]
D [20/Jan/2015:19:51:46 +0900] [Job 1] Found: %%BeginPageSetup
D [20/Jan/2015:19:51:46 +0900] [Job 1] Inserting option code into "PageSetup" section.
D [20/Jan/2015:19:51:46 +0900] [Job 1] Flushing FIFO.
D [20/Jan/2015:19:51:46 +0900] [Job 1]
D [20/Jan/2015:19:51:46 +0900] [Job 1] Starting renderer with command: "gs -sstdout=%stderr -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="HP LaserJet 1018" -r600 -sIjsParams=Quality:Quality=0,Quality:ColorMode=0,Quality:PenSet=0,PS:MediaPosition=7 -dIjsUseOutputFD -sOutputFile=%stdout -_"
D [20/Jan/2015:19:51:46 +0900] [Job 1] Starting process "kid3" (generation 1)
D [20/Jan/2015:19:51:46 +0900] [Job 1]
D [20/Jan/2015:19:51:46 +0900] [Job 1] Closing renderer
D [20/Jan/2015:19:51:46 +0900] [Job 1] Starting process "kid4" (generation 2)
D [20/Jan/2015:19:51:46 +0900] [Job 1] Starting process "renderer" (generation 2)
D [20/Jan/2015:19:51:46 +0900] [Job 1] JCL: %-12345X@PJL
D [20/Jan/2015:19:51:46 +0900] [Job 1] <job data>
D [20/Jan/2015:19:51:46 +0900] [Job 1]
D [20/Jan/2015:19:51:46 +0900] [Job 1] prnt/hpijs/services.cpp 466: WARNING: printer bi-di error=15
D [20/Jan/2015:19:51:46 +0900] [Job 1] **** Unable to open the initial device, quitting.
D [20/Jan/2015:19:51:46 +0900] [Job 1] renderer exited with status 1
D [20/Jan/2015:19:51:46 +0900] [Job 1] Possible error on renderer command line or PostScript error. Check options.kid3 exited with status 3
D [20/Jan/2015:19:51:46 +0900] [Job 1] Process is dying with "Error closing renderer
D [20/Jan/2015:19:51:46 +0900] [Job 1] ", exit stat 3
D [20/Jan/2015:19:51:46 +0900] [Job 1] Cleaning up...
D [20/Jan/2015:19:51:46 +0900] [Job 1] prnt/backend/hp.c 902: ERROR: null print job total=0
D [20/Jan/2015:19:51:46 +0900] [Job 1] End of messages
D [20/Jan/2015:19:51:46 +0900] [Job 1] printer-state=3(idle)
D [20/Jan/2015:19:51:46 +0900] [Job 1] printer-state-message="/usr/lib/cups/filter/foomatic-rip failed"
D [20/Jan/2015:19:51:46 +0900] [Job 1] printer-state-reasons=none
E [20/Jan/2015:19:52:54 +0900] cupsdAuthorize: pam_authenticate() returned 7 (Authentication failure)!
E [20/Jan/2015:19:52:59 +0900] cupsdAuthorize: pam_authenticate() returned 7 (Authentication failure)!
E [20/Jan/2015:19:54:08 +0900] [Job 2] Job stopped due to filter errors; please consult the error_log file for details.
D [20/Jan/2015:19:54:08 +0900] [Job 2] The following messages were recorded from 19:54:02 to 19:54:08
D [20/Jan/2015:19:54:08 +0900] [Job 2] Adding start banner page "none".
D [20/Jan/2015:19:54:08 +0900] [Job 2] Queued on "hplaserjet1020" by "root".
D [20/Jan/2015:19:54:08 +0900] [Job 2] Auto-typing file...
D [20/Jan/2015:19:54:08 +0900] [Job 2] Request file type is application/postscript.
D [20/Jan/2015:19:54:08 +0900] [Job 2] File of type application/postscript queued by "root".
D [20/Jan/2015:19:54:08 +0900] [Job 2] Adding end banner page "none".
D [20/Jan/2015:19:54:08 +0900] [Job 2] job-sheets=none,none
D [20/Jan/2015:19:54:08 +0900] [Job 2] argv[0]="hplaserjet1020"
D [20/Jan/2015:19:54:08 +0900] [Job 2] argv[1]="2"
D [20/Jan/2015:19:54:08 +0900] [Job 2] argv[2]="root"
D [20/Jan/2015:19:54:08 +0900] [Job 2] argv[3]="YaST2testprint_hplaserjet1020"
D [20/Jan/2015:19:54:08 +0900] [Job 2] argv[4]="1"
D [20/Jan/2015:19:54:08 +0900] [Job 2] argv[5]="finishings=3 number-up=1 page-label=hplaserjet1020:YaST2testprint@linux-750h.site job-uuid=urn:uuid:5abea9f0-5043-36f9-61d4-8ae6732dcd50 job-originating-host-name=localhost time-at-creation=1421751242 time-at-processing=1421751242"
D [20/Jan/2015:19:54:08 +0900] [Job 2] argv[6]="/var/spool/cups/d00002-001"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[2]="CUPS_DOCROOT=/usr/share/cups/webcontent"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[7]="CUPS_STATEDIR=/run/cups"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[8]="HOME=/var/spool/cups/tmp"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[10]="SERVER_ADMIN=root@linux-750h.site"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[11]="SOFTWARE=CUPS/1.5.4"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[13]="USER=root"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[14]="CUPS_MAX_MESSAGE=2047"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[17]="IPP_PORT=631"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[18]="CHARSET=utf-8"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[19]="LANG=en.UTF-8"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[20]="PPD=/etc/cups/ppd/hplaserjet1020.ppd"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[21]="RIP_MAX_CACHE=128m"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[22]="CONTENT_TYPE=application/postscript"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[23]="DEVICE_URI=hp:/usb/HP_LaserJet_1020?serial=JL1CPLP"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[24]="PRINTER_INFO=HP LaserJet 1020 hpijs, 3.14.6, requires proprietary plugin"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[25]="PRINTER_LOCATION="
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[26]="PRINTER=hplaserjet1020"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[27]="PRINTER_STATE_REASONS=none"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[28]="CUPS_FILETYPE=document"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[29]="FINAL_CONTENT_TYPE=printer/hplaserjet1020"
D [20/Jan/2015:19:54:08 +0900] [Job 2] envp[30]="AUTH_I****"
D [20/Jan/2015:19:54:08 +0900] [Job 2] Started filter /usr/lib/cups/filter/pstops (PID 3272)
D [20/Jan/2015:19:54:08 +0900] [Job 2] Started filter /usr/lib/cups/filter/foomatic-rip (PID 3273)
D [20/Jan/2015:19:54:08 +0900] [Job 2] Started backend /usr/lib/cups/backend/hp (PID 3274)
D [20/Jan/2015:19:54:08 +0900] [Job 2] Page = 612x792; 18,14 to 594,778
D [20/Jan/2015:19:54:08 +0900] [Job 2] slow_collate=0, slow_duplex=0, slow_order=0
D [20/Jan/2015:19:54:08 +0900] [Job 2] Before copy_comments - %!PS-Adobe-3.0
D [20/Jan/2015:19:54:08 +0900] [Job 2] %!PS-Adobe-3.0
D [20/Jan/2015:19:54:08 +0900] [Job 2] %%BoundingBox: 0 0 612 792
D [20/Jan/2015:19:54:08 +0900] [Job 2] %%Pages: 1
D [20/Jan/2015:19:54:08 +0900] [Job 2] %%LanguageLevel: 1
D [20/Jan/2015:19:54:08 +0900] [Job 2] %%DocumentData: Clean7Bit
D [20/Jan/2015:19:54:08 +0900] [Job 2] %%DocumentSuppliedResources: procset testprint/1.3
D [20/Jan/2015:19:54:08 +0900] [Job 2] %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [20/Jan/2015:19:54:08 +0900] [Job 2] %%Creator: Michael Sweet, Apple Inc. - adapted by openSUSE/Novell
D [20/Jan/2015:19:54:08 +0900] [Job 2] %%CreationDate: D:20090113092400+0800
D [20/Jan/2015:19:54:08 +0900] [Job 2] %%EndComments
D [20/Jan/2015:19:54:08 +0900] [Job 2] Before copy_prolog - %%BeginProlog
D [20/Jan/2015:19:54:08 +0900] [Job 2] Before copy_setup - %%Page: 1 1
D [20/Jan/2015:19:54:08 +0900] [Job 2] Before page loop - %%Page: 1 1
D [20/Jan/2015:19:54:08 +0900] [Job 2] Copying page 1...
D [20/Jan/2015:19:54:08 +0900] [Job 2] pagew = 576.0, pagel = 763.2
D [20/Jan/2015:19:54:08 +0900] [Job 2] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [20/Jan/2015:19:54:08 +0900] [Job 2] PageLeft = 18.0, PageRight = 594.0
D [20/Jan/2015:19:54:08 +0900] [Job 2] PageTop = 777.6, PageBottom = 14.4
D [20/Jan/2015:19:54:08 +0900] [Job 2] PageWidth = 612.0, PageLength = 792.0
D [20/Jan/2015:19:54:08 +0900] [Job 2] Wrote 1 pages...
D [20/Jan/2015:19:54:08 +0900] [Job 2] Calling FindDeviceById(cups-hplaserjet1020)
D [20/Jan/2015:19:54:08 +0900] [Job 2] Failed to send: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
D [20/Jan/2015:19:54:08 +0900] [Job 2] Failed to get find device cups-hplaserjet1020
D [20/Jan/2015:19:54:08 +0900] [Job 2] 'CM Color Calibration' Mode in SPOOLER-LESS: Off
D [20/Jan/2015:19:54:08 +0900] [Job 2] Getting input from file
D [20/Jan/2015:19:54:08 +0900] [Job 2] foomatic-rip version 1.0.58 running...
D [20/Jan/2015:19:54:08 +0900] [Job 2] Parsing PPD file ...
D [20/Jan/2015:19:54:08 +0900] [Job 2] Added option ColorSpace
D [20/Jan/2015:19:54:08 +0900] [Job 2] Added option Resolution
D [20/Jan/2015:19:54:08 +0900] [Job 2] Added option PageSize
D [20/Jan/2015:19:54:08 +0900] [Job 2] Added option Model
D [20/Jan/2015:19:54:08 +0900] [Job 2] Added option PrintoutMode
D [20/Jan/2015:19:54:08 +0900] [Job 2] Added option MediaType
D [20/Jan/2015:19:54:08 +0900] [Job 2] Added option InputSlot
D [20/Jan/2015:19:54:08 +0900] [Job 2] Added option Quality
D [20/Jan/2015:19:54:08 +0900] [Job 2] Added option ImageableArea
D [20/Jan/2015:19:54:08 +0900] [Job 2] Added option PaperDimension
D [20/Jan/2015:19:54:08 +0900] [Job 2] Added option Font
D [20/Jan/2015:19:54:08 +0900] [Job 2]
D [20/Jan/2015:19:54:08 +0900] [Job 2] Parameter Summary
D [20/Jan/2015:19:54:08 +0900] [Job 2] -----------------
D [20/Jan/2015:19:54:08 +0900] [Job 2]
D [20/Jan/2015:19:54:08 +0900] [Job 2] Spooler: cups
D [20/Jan/2015:19:54:08 +0900] [Job 2] Printer: hplaserjet1020
D [20/Jan/2015:19:54:08 +0900] [Job 2] Shell: /bin/bash
D [20/Jan/2015:19:54:08 +0900] [Job 2] PPD file: /etc/cups/ppd/hplaserjet1020.ppd
D [20/Jan/2015:19:54:08 +0900] [Job 2] ATTR file:
D [20/Jan/2015:19:54:08 +0900] [Job 2] Printer model: HP LaserJet 1020 hpijs, 3.14.6, requires proprietary plugin
D [20/Jan/2015:19:54:08 +0900] [Job 2] File(s) to be printed:
D [20/Jan/2015:19:54:08 +0900] [Job 2] <STDIN>
D [20/Jan/2015:19:54:08 +0900] [Job 2]
D [20/Jan/2015:19:54:08 +0900] [Job 2] Ghostscript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [20/Jan/2015:19:54:08 +0900] [Job 2] Printing system options:
D [20/Jan/2015:19:54:08 +0900] [Job 2] Pondering option 'finishings=3'
D [20/Jan/2015:19:54:08 +0900] [Job 2] Unknown option finishings=3.
D [20/Jan/2015:19:54:08 +0900] [Job 2] Pondering option 'number-up=1'
D [20/Jan/2015:19:54:08 +0900] [Job 2] Unknown option number-up=1.
D [20/Jan/2015:19:54:08 +0900] [Job 2] Pondering option 'page-label=hplaserjet1020:YaST2testprint@linux-750h.site'
D [20/Jan/2015:19:54:08 +0900] [Job 2] Unknown option page-label=hplaserjet1020:YaST2testprint@linux-750h.site.
D [20/Jan/2015:19:54:08 +0900] [Job 2] Pondering option 'job-uuid=urn:uuid:5abea9f0-5043-36f9-61d4-8ae6732dcd50'
D [20/Jan/2015:19:54:08 +0900] [Job 2] Unknown option job-uuid=urn:uuid:5abea9f0-5043-36f9-61d4-8ae6732dcd50.
D [20/Jan/2015:19:54:08 +0900] [Job 2] Pondering option 'job-originating-host-name=localhost'
D [20/Jan/2015:19:54:08 +0900] [Job 2] Unknown option job-originating-host-name=localhost.
D [20/Jan/2015:19:54:08 +0900] [Job 2] Pondering option 'time-at-creation=1421751242'
D [20/Jan/2015:19:54:08 +0900] [Job 2] Unknown option time-at-creation=1421751242.
D [20/Jan/2015:19:54:08 +0900] [Job 2] Pondering option 'time-at-processing=1421751242'
D [20/Jan/2015:19:54:08 +0900] [Job 2] Unknown option time-at-processing=1421751242.
D [20/Jan/2015:19:54:08 +0900] [Job 2] CM Color Calibration Mode in CUPS: Off
D [20/Jan/2015:19:54:08 +0900] [Job 2] Options from the PPD file:
D [20/Jan/2015:19:54:08 +0900] [Job 2]
D [20/Jan/2015:19:54:08 +0900] [Job 2] ================================================
D [20/Jan/2015:19:54:08 +0900] [Job 2]
D [20/Jan/2015:19:54:08 +0900] [Job 2] File: <STDIN>
D [20/Jan/2015:19:54:08 +0900] [Job 2]
D [20/Jan/2015:19:54:08 +0900] [Job 2] ================================================
D [20/Jan/2015:19:54:08 +0900] [Job 2]
D [20/Jan/2015:19:54:08 +0900] [Job 2] Filetype: PostScript
D [20/Jan/2015:19:54:08 +0900] [Job 2] Reading PostScript input ...
D [20/Jan/2015:19:54:08 +0900] [Job 2] --> This document is DSC-conforming!
D [20/Jan/2015:19:54:08 +0900] [Job 2] Found %RBINumCopies: 1
D [20/Jan/2015:19:54:08 +0900] [Job 2]
D [20/Jan/2015:19:54:08 +0900] [Job 2] -----------
D [20/Jan/2015:19:54:08 +0900] [Job 2] Found: %%BeginProlog
D [20/Jan/2015:19:54:08 +0900] [Job 2] Found: %%EndProlog
D [20/Jan/2015:19:54:08 +0900] [Job 2]
D [20/Jan/2015:19:54:08 +0900] [Job 2] -----------
D [20/Jan/2015:19:54:08 +0900] [Job 2] Found: %%BeginSetup
D [20/Jan/2015:19:54:08 +0900] [Job 2] Found: %%BeginFeature: *MediaType Plain
D [20/Jan/2015:19:54:08 +0900] [Job 2] Option: MediaType=Plain
D [20/Jan/2015:19:54:08 +0900] [Job 2] Setting option
D [20/Jan/2015:19:54:08 +0900] [Job 2] Found: %% FoomaticRIPOptionSetting: MediaType=Plain
D [20/Jan/2015:19:54:08 +0900] [Job 2] Option: MediaType=Plain
D [20/Jan/2015:19:54:08 +0900] [Job 2] Setting option
D [20/Jan/2015:19:54:08 +0900] [Job 2] Found: %%BeginFeature: *PageSize Letter
D [20/Jan/2015:19:54:08 +0900] [Job 2] Option: PageSize=Letter
D [20/Jan/2015:19:54:08 +0900] [Job 2] Setting option
D [20/Jan/2015:19:54:08 +0900] [Job 2] Found: %% FoomaticRIPOptionSetting: PageSize=Letter
D [20/Jan/2015:19:54:08 +0900] [Job 2] Option: PageSize=Letter
D [20/Jan/2015:19:54:08 +0900] [Job 2] Setting option
D [20/Jan/2015:19:54:08 +0900] [Job 2] Found: %%BeginFeature: *PrintoutMode Normal
D [20/Jan/2015:19:54:08 +0900] [Job 2] Option: PrintoutMode=Normal
D [20/Jan/2015:19:54:08 +0900] [Job 2] Setting option
D [20/Jan/2015:19:54:08 +0900] [Job 2] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
D [20/Jan/2015:19:54:08 +0900] [Job 2] Option: PrintoutMode=Normal
D [20/Jan/2015:19:54:08 +0900] [Job 2] Setting option
D [20/Jan/2015:19:54:08 +0900] [Job 2] Found: %%BeginFeature: *InputSlot Default
D [20/Jan/2015:19:54:08 +0900] [Job 2] Option: InputSlot=Default
D [20/Jan/2015:19:54:08 +0900] [Job 2] Setting option
D [20/Jan/2015:19:54:08 +0900] [Job 2] Found: %% FoomaticRIPOptionSetting: InputSlot=Default
D [20/Jan/2015:19:54:08 +0900] [Job 2] Option: InputSlot=Default
D [20/Jan/2015:19:54:08 +0900] [Job 2] Setting option
D [20/Jan/2015:19:54:08 +0900] [Job 2] Found: %%BeginFeature: *Quality FromPrintoutMode
D [20/Jan/2015:19:54:08 +0900] [Job 2] Option: Quality=FromPrintoutMode
D [20/Jan/2015:19:54:08 +0900] [Job 2] Setting option
D [20/Jan/2015:19:54:08 +0900] [Job 2] Found: %% FoomaticRIPOptionSetting: Quality=@PrintoutMode
D [20/Jan/2015:19:54:08 +0900] [Job 2] Option: Quality=FromPrintoutMode
D [20/Jan/2015:19:54:08 +0900] [Job 2] Setting option
D [20/Jan/2015:19:54:08 +0900] [Job 2] Found: %%EndSetup
D [20/Jan/2015:19:54:08 +0900] [Job 2] Inserting PostScript code for CUPS' page accounting
D [20/Jan/2015:19:54:08 +0900] [Job 2]
D [20/Jan/2015:19:54:08 +0900] [Job 2] -----------
D [20/Jan/2015:19:54:08 +0900] [Job 2] New page: %%Page: 1 1
D [20/Jan/2015:19:54:08 +0900] [Job 2]
D [20/Jan/2015:19:54:08 +0900] [Job 2] Found: %%BeginPageSetup
D [20/Jan/2015:19:54:08 +0900] [Job 2] Inserting option code into "PageSetup" section.
D [20/Jan/2015:19:54:08 +0900] [Job 2] Flushing FIFO.
D [20/Jan/2015:19:54:08 +0900] [Job 2]
D [20/Jan/2015:19:54:08 +0900] [Job 2] Starting renderer with command: "gs -sstdout=%stderr -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="HP LaserJet 1018" -r600 -sIjsParams=Quality:Quality=0,Quality:ColorMode=0,Quality:PenSet=0,PS:MediaPosition=7 -dIjsUseOutputFD -sOutputFile=%stdout -_"
D [20/Jan/2015:19:54:08 +0900] [Job 2] Starting process "kid3" (generation 1)
D [20/Jan/2015:19:54:08 +0900] [Job 2]
D [20/Jan/2015:19:54:08 +0900] [Job 2] Closing renderer
D [20/Jan/2015:19:54:08 +0900] [Job 2] Starting process "kid4" (generation 2)
D [20/Jan/2015:19:54:08 +0900] [Job 2] Starting process "renderer" (generation 2)
D [20/Jan/2015:19:54:08 +0900] [Job 2] JCL: %-12345X@PJL
D [20/Jan/2015:19:54:08 +0900] [Job 2] <job data>
D [20/Jan/2015:19:54:08 +0900] [Job 2]
D [20/Jan/2015:19:54:08 +0900] [Job 2] prnt/hpijs/services.cpp 466: WARNING: printer bi-di error=15
D [20/Jan/2015:19:54:08 +0900] [Job 2] **** Unable to open the initial device, quitting.
D [20/Jan/2015:19:54:08 +0900] [Job 2] renderer exited with status 1
D [20/Jan/2015:19:54:08 +0900] [Job 2] Possible error on renderer command line or PostScript error. Check options.kid3 exited with status 3
D [20/Jan/2015:19:54:08 +0900] [Job 2] Process is dying with "Error closing renderer
D [20/Jan/2015:19:54:08 +0900] [Job 2] ", exit stat 3
D [20/Jan/2015:19:54:08 +0900] [Job 2] Cleaning up...
D [20/Jan/2015:19:54:08 +0900] [Job 2] prnt/backend/hp.c 902: ERROR: null print job total=0
D [20/Jan/2015:19:54:08 +0900] [Job 2] End of messages
D [20/Jan/2015:19:54:08 +0900] [Job 2] printer-state=3(idle)
D [20/Jan/2015:19:54:08 +0900] [Job 2] printer-state-message="/usr/lib/cups/filter/foomatic-rip failed"
D [20/Jan/2015:19:54:08 +0900] [Job 2] printer-state-reasons=none
E [20/Jan/2015:19:56:07 +0900] cupsdAuthorize: pam_authenticate() returned 7 (Authentication failure)!
E [20/Jan/2015:20:01:50 +0900] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"!
E [20/Jan/2015:20:09:58 +0900] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"!
...
E [17/Feb/2015:11:22:13 +0900] Unable to bind socket for address [v1.::1]:631 - Address already in use.
E [17/Feb/2015:11:22:13 +0900] Unable to bind socket for address 127.0.0.1:631 - Address already in use.
E [17/Feb/2015:11:50:16 +0900] Returning HTTP Forbidden for CUPS-Add-Modify-Printer (ipp://marc@localhost:631/printers/hplaserjet1020) from localhost
E [17/Feb/2015:11:51:03 +0900] Returning HTTP Forbidden for CUPS-Add-Modify-Printer (ipp://marc@localhost:631/printers/hplaserjet1020) from localhost
E [17/Feb/2015:11:53:12 +0900] [Job 50] Stopping unresponsive job!
E [17/Feb/2015:11:58:30 +0900] [Job 50] Stopping unresponsive job!
E [17/Feb/2015:12:15:45 +0900] cupsdAuthorize: Empty Basic password!
E [17/Feb/2015:12:15:45 +0900] Returning HTTP Forbidden for CUPS-Add-Modify-Printer (ipp://localhost/printers/HP_LaserJet_1020) from localhost
E [17/Feb/2015:17:47:23 +0900] Unable to bind socket for address [v1.::1]:631 - Address already in use.
E [17/Feb/2015:17:47:23 +0900] Unable to bind socket for address 127.0.0.1:631 - Address already in use.
E [17/Feb/2015:17:53:34 +0900] Unable to bind socket for address [v1.::1]:631 - Address already in use.
E [17/Feb/2015:17:53:34 +0900] Unable to bind socket for address 127.0.0.1:631 - Address already in use.
E [17/Feb/2015:18:23:07 +0900] Unable to bind socket for address [v1.::1]:631 - Address already in use.
E [17/Feb/2015:18:23:07 +0900] Unable to bind socket for address 127.0.0.1:631 - Address already in use.
E [18/Feb/2015:10:00:25 +0900] Unable to bind socket for address [v1.::1]:631 - Address already in use.
E [18/Feb/2015:10:00:25 +0900] Unable to bind socket for address 127.0.0.1:631 - Address already in use.
E [18/Feb/2015:10:51:23 +0900] [Job 55] Stopping unresponsive job!
E [18/Feb/2015:10:53:44 +0900] Returning HTTP Forbidden for CUPS-Add-Modify-Printer (ipp://marc@localhost:631/printers/hplaserjet1020) from localhost
E [18/Feb/2015:11:00:23 +0900] [Job 55] Stopping unresponsive job!
E [19/Feb/2015:15:16:06 +0900] Unable to bind socket for address [v1.::1]:631 - Address already in use.
E [19/Feb/2015:15:16:06 +0900] Unable to bind socket for address 127.0.0.1:631 - Address already in use.
E [19/Feb/2015:15:34:12 +0900] [Job 62] Stopping unresponsive job!
E [19/Feb/2015:15:39:29 +0900] [Job 62] Stopping unresponsive job!
E [19/Feb/2015:15:44:45 +0900] [Job 62] Stopping unresponsive job!
E [19/Feb/2015:15:50:01 +0900] [Job 62] Stopping unresponsive job!
Unterstützt HPLIP im Rahmen von Opensuse 13.2 nicht den HP Laserjet 1020?
Die Ergebnisse von
Code:
hp-doctor
deuten darauf hin. (Diese Option lässt sich auch durch den HP Device Manager unter "Diagnose HPLIP Driver" ausführen):
Code:
HP Linux Imaging and Printing System (ver. 3.14.6)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Checking for Deprecated items....
error: This distro (i.e suse 13.2) is either deprecated or not yet supported.
The diagnosis is limited on unsupported platforms. Do you want to continue?(y=yes*, n=no):y
Checking for HPLIP updates....
error: HPLIP upgrade is disabled by openSUSE for security reasons, see https://bugzilla.novell.com/show_bug.cgi?id=853405 - if you like to upgrade HPLIP, use an openSUSE software package manager like YaST or zypper.
Done.
error: Failed to upgrade latest HPLIP. Is hp-upgrade already running (i.e. foreground or background)?
Checking for Dependencies....
warning: suse-13.2 version is not supported. Using suse-13.1 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 3.16.7-7-desktop #1 SMP PREEMPT Wed Dec 17 18:00:44 UTC 2014 (762f27a) GNU/Linux
Host: linux-750h.site
Proc: 3.16.7-7-desktop #1 SMP PREEMPT Wed Dec 17 18:00:44 UTC 2014 (762f27a) GNU/Linux
Distribution: suse 13.2
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.14.6
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for suse distro 13.2 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.14.6
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/cups/model/manufacturer-PPDs/hplip
ppdbase=/usr/share/cups/model/manufacturer-PPDs
doc=/usr/share/doc/packages/hplip
html==/usr/share/doc/packages/hplip
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/lib/cups/driver
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=no
cups-ppd-install=yes
internal-tag=3.14.6
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.14.6
Current contents of '~/.hplip/hplip.conf' file:
[settings]
systray_visible = 0
systray_messages = 0
[last_used]
device_uri = "hp:/usb/HP_LaserJet_1020?serial=JL1CPLP"
printer_name = HP_LaserJet_1020
working_dir = .
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[refresh]
rate = 30
enable = true
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
[upgrade]
notify_upgrade = false
last_upgraded_time = 1424329380.90381
pending_upgrade_time = 0
[installation]
date_time = 19.02.2015 17:21:07
version = 3.14.6
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
policykit Admin-Policy-framework OPTIONAL - 0.112 OK -
gs Ghostscript REQUIRED 7.05 9.15 OK -
network Network-wget OPTIONAL - 1.16 OK -
scanimage Shell-Scanning OPTIONAL 1.0 1.0.24 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
dbus DBus REQUIRED - 1.8.14 OK -
cups CUPS REQUIRED 1.1 1.5.4 OK 'CUPS Scheduler is running'
xsane SANE-GUI OPTIONAL 0.9 0.998 OK -
-------------------------
| General Dependencies |
-------------------------
error: reportlab Python-PDF-Lib OPTIONAL 2.0 - MISSING 'reportlab needs to be installed'
libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK -
pil Python-Image-Lib OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.11.1 OK -
libjpeg JPEG-Lib REQUIRED - - OK -
libpthread POSIX-Threads-Lib REQUIRED - 2.19 OK -
python-dbus Python-DBUS REQUIRED 0.80.0 1.2.0 OK -
python-devel Python-SDK REQUIRED 2.2 2.7.8 OK -
pyqt4 Python-Qt4 REQUIRED 4.0 4.11.1 OK -
cups-devel CUPS-SDK REQUIRED - 1.5.4 OK -
sane-devel SANE-SDK REQUIRED - 1.0.24 OK -
libusb USB-Lib REQUIRED - 1.0 OK -
sane Scan-Lib REQUIRED - 1.0.24 OK -
cups-image CUPS-Image-Lib REQUIRED - 1.5.4 OK -
libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.7.3 OK -
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
python-notify Desktop-notifications OPTIONAL - - OK -
------------------------------
| Compile Time Dependencies |
------------------------------
gcc gcc-Compiler REQUIRED - 4.8.3 OK -
libtool Build-tools REQUIRED - 2.4.2 OK -
make GNU-Build-tools REQUIRED 3.0 4.0 OK -
----------------------
| Python Extentions |
----------------------
cupsext CUPS-Extension REQUIRED - 3.14.6 OK -
pcardext PhotoCard-Extension REQUIRED - 3.14.6 OK -
hpmudext IO-Extension REQUIRED - 3.14.6 OK -
-----------------------
| Scan Configuration |
-----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.14.6 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.14.6 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
hplaserjet1020
--------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_1020?serial=JL1CPLP
PPD: /etc/cups/ppd/hplaserjet1020.ppd
PPD Description: HP LaserJet 1020, hpcups 3.14.6, requires proprietary plugin
Printer /usr/lib/cups/backend/hp failedis idle. enabled since Do 19 Feb 2015 15:50:16 KST
Required plug-in status: Installed
error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_1020?serial=JL1CPLP
error: Device not found
error: Communication status: Failed
--------------
| PERMISSION |
--------------
Code:
xxx@linux-750h:~> cat /etc/udev/rules.d/56-hpmud.rules
# HPLIP udev rules file. Notify console user if plugin support is required for this device.
# SUSE changed:
#
# Exchanged the rule to GOTO hpmud_usb_rules if SUBSYSTEM is "usb"
# with the rule if SUBSYSTEM is "ppdev" to avoid that the "ppdev" rule
# is needlessly processed when SUBSYSTEM is "usb".
#
# Added GOTO hpmud_rules_end rule to skip the hpmud_usb_rules
# if SUBSYSTEM is not "usb" or if ENV{DEVTYPE} is not "usb_device" or if SUBSYSTEM is not "ppdev"
# to avoid that the hpmud_usb_rules are needlessly processed.
#
# The rule to automatically "add the printer and install plugin" is disabled
# because automated installation of non-free proprietary third-party software
# (here the plugin from HP) should not happen and it can cause whatever kind
# of strange behaviour see for example https://bugs.launchpad.net/bugs/1197416
# and https://bugs.launchpad.net/bugs/1221348
# while in contrast manual printer setup via hp-setup usually "just works"
# and it is clear for the user what goes on and in case of failure what went wrong.
#
# Because the rule to automatically "add the printer and install plugin"
# is also used to upload firmware into printers that need it
# see https://bugs.launchpad.net/bugs/1220628
# a rule that only uploads firmware into printers that need it is added.
ACTION!="add", GOTO="hpmud_rules_end"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", GOTO="hpmud_usb_rules"
SUBSYSTEM=="ppdev", OWNER="root", GROUP="lp", MODE="0664"
GOTO="hpmud_rules_end"
LABEL="hpmud_usb_rules"
# ENV{ID_HPLIP}="1" is for Ubuntu udev-acl
ATTR{idVendor}=="03f0", ATTR{idProduct}=="????", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes", ENV{hp_test}="yes", ENV{ID_HPLIP}="1"
# This rule will add the printer and install plugin
#ENV{hp_test}=="yes", PROGRAM="/bin/sh -c 'logger -p user.info loading HP Device $env{BUSNUM} $env{DEVNUM}'", RUN+="/bin/sh -c 'if [ -f /usr/bin/systemctl ]; then /usr/bin/systemctl --no-block start hplip-printer@$env{BUSNUM}:$env{DEVNUM}.service; else /usr/bin/nohup /usr/bin/python /usr/bin/hp-config_usb_printer $env{BUSNUM}:$env{DEVNUM} ; fi &'"
# This rule uploads firmware to HP USB printer devices if needed:
ENV{hp_test}=="yes", PROGRAM="/bin/logger -p user.info udev hpmud.rules runs hp-firmware to test if HP device with USB vendor ID $attr{idVendor} and USB product ID $attr{idProduct} at USB bus ID $env{BUSNUM} and USB device ID $env{DEVNUM} needs firmware and if yes to upload it", RUN+="/usr/bin/hp-firmware -s $env{BUSNUM}:$env{DEVNUM}"
# If sane-bankends is installed add hpaio backend support to dll.conf if needed.
ENV{sane_hpaio}=="yes", RUN+="/bin/sh -c 'grep -q ^#hpaio /etc/sane.d/dll.conf;if [ $$? -eq 0 ];then sed -i -e s/^#hpaio/hpaio/ /etc/sane.d/dll.conf;else grep -q ^hpaio /etc/sane.d/dll.conf;if [ $$? -ne 0 ];then echo hpaio >>/etc/sane.d/dll.conf;fi;fi'"
# The following rule will disable USB autosuspend for the device
ENV{libsane_matched}=="yes", RUN+="/bin/sh -c 'test -e /sys/$env{DEVPATH}/power/level && echo on > /sys/$env{DEVPATH}/power/level'"
LABEL="hpmud_rules_end"
Was könnte ich noch unternehmem?
- Unter Yast "Druckertreiberpakete installieren oder entfernen" bestimmte Treiberpakete entfernen und andere hinzufügen?
- Weiterhin nach der für den Laserjet 1020 passenden PPD-Datei suchen?
- Neuinstallation des Druckers über den Cups-Server versuchen?
- In der Datei "/etc/udev/rules.d/56-hpmud.rules" etwas ändern?
- Eine andere hplip-Version installieren (etwa Version Version: 3.15.2 oder gar eine frühere stabile Version)?
Über Hinweise würde ich mich freuen! Gruß Sendbote