Laut die letzte Easy Linux, die spca5xx-20060501 sollte das.g. webcam unterstützen.
(Ich habe es gelöst in dem ich die Quicam express mit den u.g. ID gegen eine Quickcam Communication STX getauscht hatte).
Wo kann ich noch weiterschrauben? nach dem misserfolg mit spca5xx habe die qc-usb Modul installiert. Beide habe ich mit "make make install" Befehle eingebunden. Diese Verfahren ist OK gelaufen.
Die Camera ist im YaST unter Hardware-Informationen zu erkennen
MoTV und XawTV möchten nicht starten (siehe unten)? warum?
Kopete un Ekiga erkennen immer noch kei webcam Gerät?
Soll v4l es auch gestartet werden? wie?
Bitte um weitere Erläuterungen.
Grüße
Juan_Lutz
Ich bedanke mich für weitere Hinweise
Hier mein lsusb:
jehrenhaus@linux:~> lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 006: ID 046d:092f Logitech, Inc.
Bus 001 Device 003: ID 03eb:3301 Atmel Corp. 4-port Hub
Bus 001 Device 002: ID 04a9:105c Canon, Inc.
Bus 001 Device 001: ID 0000:0000
Hier die lsmod
jehrenhaus@linux:~> lsmod
Module Size Used by
quickcam 76452 0
appletalk 35508 0
ax25 58092 0
ipx 27308 0
spca5xx 667664 0
videodev 9088 2 quickcam,spca5xx
hfsplus 75140 0
subfs 7552 1
ipt_pkttype 1664 1
ipt_LOG 6912 7
ipt_limit 2304 7
speedstep_lib 4228 0
freq_table 4612 0
snd_pcm_oss 59168 0
snd_mixer_oss 18944 1 snd_pcm_oss
snd_seq 51984 0
snd_seq_device 8588 1 snd_seq
button 7056 0
battery 10244 0
ac 5252 0
af_packet 21384 2
edd 9824 0
uinput 7808 4
usblp 12544 0
ip6t_REJECT 5504 3
ipt_REJECT 5632 3
ipt_state 1920 12
ohci1394 32820 0
ieee1394 97208 1 ohci1394
nvidia 4546036 20
iptable_mangle 2688 0
generic 4484 0 [permanent]
iptable_nat 22228 0
iptable_filter 2816 1
sata_nv 9348 0
ehci_hcd 32136 0
shpchp 88676 0
pci_hotplug 26164 1 shpchp
ip6table_mangle 2304 0
ohci_hcd 20228 0
usbcore 112512 6 quickcam,spca5xx,usblp,ehci_hcd,ohci_hcd
forcedeth 17920 0
snd_intel8x0 33504 4
snd_ac97_codec 91004 1 snd_intel8x0
snd_ac97_bus 2432 1 snd_ac97_codec
i2c_nforce2 6784 0
i2c_core 20368 2 nvidia,i2c_nforce2
amd64_agp 11976 1
agpgart 33096 2 nvidia,amd64_agp
snd_pcm 93064 4 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 24452 3 snd_seq,snd_pcm
snd 60420 14 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 9184 1 snd
snd_page_alloc 10632 2 snd_intel8x0,snd_pcm
ip_conntrack 42168 2 ipt_state,iptable_nat
ip_tables 19456 8 ipt_pkttype,ipt_LOG,ipt_limit,ipt_REJECT,ipt_state,iptable_mangle,iptable_nat,iptable_filter
ip6table_filter 2688 1
ip6_tables 18176 3 ip6t_REJECT,ip6table_mangle,ip6table_filter
ipv6 242752 13 ip6t_REJECT
parport_pc 38980 1
lp 11460 0
parport 33864 2 parport_pc,lp
nls_iso8859_1 4096 1
nls_cp437 5760 1
vfat 12800 1
fat 49692 1 vfat
dm_mod 54972 0
reiserfs 250480 1
fan 4996 0
thermal 14472 0
processor 24512 1 thermal
ide_cd 39684 0
cdrom 36896 1 ide_cd
sata_sil 9476 0
libata 48516 2 sata_nv,sata_sil
amd74xx 13980 0 [permanent]
sd_mod 18576 0
scsi_mod 131304 2 libata,sd_mod
ide_disk 17152 4
ide_core 122380 4 generic,ide_cd,amd74xx,ide_disk
MoTV und XawTV
Irgend eine Eintellung bei XF86...?
jehrenhaus@linux:~> motv -c /dev/video1
This is motv-3.94, running on Linux/i686 (2.6.13-15.10-default)
Warning: Actions not found: Remote
Warning: Actions not found: Remote
X Error of failed request: XF86DGANoDirectVideoMode
Major opcode of failed request: 137 (XFree86-DGA)
Minor opcode of failed request: 1 (XF86DGAGetVideoLL)
Serial number of failed request: 210
Current serial number in output stream: 210
jehrenhaus@linux:~>
jehrenhaus@linux:~> motv -c /dev/video0
This is motv-3.94, running on Linux/i686 (2.6.13-15.10-default)
Warning: Actions not found: Remote
Warning: Actions not found: Remote
X Error of failed request: XF86DGANoDirectVideoMode
Major opcode of failed request: 137 (XFree86-DGA)
Minor opcode of failed request: 1 (XF86DGAGetVideoLL)
Serial number of failed request: 210
Current serial number in output stream: 210
jehrenhaus@linux:~>
[/img]
(Ich habe es gelöst in dem ich die Quicam express mit den u.g. ID gegen eine Quickcam Communication STX getauscht hatte).
Wo kann ich noch weiterschrauben? nach dem misserfolg mit spca5xx habe die qc-usb Modul installiert. Beide habe ich mit "make make install" Befehle eingebunden. Diese Verfahren ist OK gelaufen.
Die Camera ist im YaST unter Hardware-Informationen zu erkennen
MoTV und XawTV möchten nicht starten (siehe unten)? warum?
Kopete un Ekiga erkennen immer noch kei webcam Gerät?
Soll v4l es auch gestartet werden? wie?
Bitte um weitere Erläuterungen.
Grüße
Juan_Lutz
Ich bedanke mich für weitere Hinweise
Hier mein lsusb:
jehrenhaus@linux:~> lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 006: ID 046d:092f Logitech, Inc.
Bus 001 Device 003: ID 03eb:3301 Atmel Corp. 4-port Hub
Bus 001 Device 002: ID 04a9:105c Canon, Inc.
Bus 001 Device 001: ID 0000:0000
Hier die lsmod
jehrenhaus@linux:~> lsmod
Module Size Used by
quickcam 76452 0
appletalk 35508 0
ax25 58092 0
ipx 27308 0
spca5xx 667664 0
videodev 9088 2 quickcam,spca5xx
hfsplus 75140 0
subfs 7552 1
ipt_pkttype 1664 1
ipt_LOG 6912 7
ipt_limit 2304 7
speedstep_lib 4228 0
freq_table 4612 0
snd_pcm_oss 59168 0
snd_mixer_oss 18944 1 snd_pcm_oss
snd_seq 51984 0
snd_seq_device 8588 1 snd_seq
button 7056 0
battery 10244 0
ac 5252 0
af_packet 21384 2
edd 9824 0
uinput 7808 4
usblp 12544 0
ip6t_REJECT 5504 3
ipt_REJECT 5632 3
ipt_state 1920 12
ohci1394 32820 0
ieee1394 97208 1 ohci1394
nvidia 4546036 20
iptable_mangle 2688 0
generic 4484 0 [permanent]
iptable_nat 22228 0
iptable_filter 2816 1
sata_nv 9348 0
ehci_hcd 32136 0
shpchp 88676 0
pci_hotplug 26164 1 shpchp
ip6table_mangle 2304 0
ohci_hcd 20228 0
usbcore 112512 6 quickcam,spca5xx,usblp,ehci_hcd,ohci_hcd
forcedeth 17920 0
snd_intel8x0 33504 4
snd_ac97_codec 91004 1 snd_intel8x0
snd_ac97_bus 2432 1 snd_ac97_codec
i2c_nforce2 6784 0
i2c_core 20368 2 nvidia,i2c_nforce2
amd64_agp 11976 1
agpgart 33096 2 nvidia,amd64_agp
snd_pcm 93064 4 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 24452 3 snd_seq,snd_pcm
snd 60420 14 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 9184 1 snd
snd_page_alloc 10632 2 snd_intel8x0,snd_pcm
ip_conntrack 42168 2 ipt_state,iptable_nat
ip_tables 19456 8 ipt_pkttype,ipt_LOG,ipt_limit,ipt_REJECT,ipt_state,iptable_mangle,iptable_nat,iptable_filter
ip6table_filter 2688 1
ip6_tables 18176 3 ip6t_REJECT,ip6table_mangle,ip6table_filter
ipv6 242752 13 ip6t_REJECT
parport_pc 38980 1
lp 11460 0
parport 33864 2 parport_pc,lp
nls_iso8859_1 4096 1
nls_cp437 5760 1
vfat 12800 1
fat 49692 1 vfat
dm_mod 54972 0
reiserfs 250480 1
fan 4996 0
thermal 14472 0
processor 24512 1 thermal
ide_cd 39684 0
cdrom 36896 1 ide_cd
sata_sil 9476 0
libata 48516 2 sata_nv,sata_sil
amd74xx 13980 0 [permanent]
sd_mod 18576 0
scsi_mod 131304 2 libata,sd_mod
ide_disk 17152 4
ide_core 122380 4 generic,ide_cd,amd74xx,ide_disk
MoTV und XawTV
Irgend eine Eintellung bei XF86...?
jehrenhaus@linux:~> motv -c /dev/video1
This is motv-3.94, running on Linux/i686 (2.6.13-15.10-default)
Warning: Actions not found: Remote
Warning: Actions not found: Remote
X Error of failed request: XF86DGANoDirectVideoMode
Major opcode of failed request: 137 (XFree86-DGA)
Minor opcode of failed request: 1 (XF86DGAGetVideoLL)
Serial number of failed request: 210
Current serial number in output stream: 210
jehrenhaus@linux:~>
jehrenhaus@linux:~> motv -c /dev/video0
This is motv-3.94, running on Linux/i686 (2.6.13-15.10-default)
Warning: Actions not found: Remote
Warning: Actions not found: Remote
X Error of failed request: XF86DGANoDirectVideoMode
Major opcode of failed request: 137 (XFree86-DGA)
Minor opcode of failed request: 1 (XF86DGAGetVideoLL)
Serial number of failed request: 210
Current serial number in output stream: 210
jehrenhaus@linux:~>
[/img]