Hallo,
ich habe mir von [BS::home:/enzokiel] moto4lin und p2kmoto installiert. Beide Installationen verliefen erwartungsgemäß problemlos. Allerdings schaffe ich es jetzt nicht auf das Handy zuzugreifen. Wenn ich es ans USB anschließe wird es auch nicht als ttyACM0 oder ttyACMirgendwas abgelegt. hwinfo liefert mir zum angeschlossenen Handy:
47: SCSI 400.0: 10600 Disk
[Created at block.244]
UDI: /org/freedesktop/Hal/devices/storage_serial_Motorola_Motorola_Phone_0_0
Unique ID: UfPf.+v2Rv6n1Tn0
Parent ID: vayM.dKudVhbQzb1
SysFS ID: /block/sdb
SysFS BusID: 4:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/host4/target4:0:0/4:0:0:0
Hardware Class: disk
Model: "Motorola Phone"
Vendor: usb 0x22b8 "Motorola"
Device: usb 0x3010 "Motorola Phone"
Revision: "2.31"
Driver: "usb-storage", "sd"
Driver Modules: "usb_storage"
Device File: /dev/sdb (/dev/sg2)
Device Files: /dev/sdb, , /dev/disk/by-path/pci-0000:00:1d.1-usb-0:1:1.0-scsi-0:0:0:0
Device Number: block 8:16-8:31 (char 21:2)
Features: Hotpluggable
Geometry (Logical): CHS 1024/0/62
Speed: 12 Mbps
Module Alias: "usb:v22B8p3010d0001dc00dsc00dp00ic08isc06ip50"
Driver Info #0:
Driver Status: usb_storage is active
Driver Activation Cmd: "modprobe usb_storage"
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #23 (USB Controller)
Was kann ich machen um connecten zu können?
Gruß,
Manni
ich habe mir von [BS::home:/enzokiel] moto4lin und p2kmoto installiert. Beide Installationen verliefen erwartungsgemäß problemlos. Allerdings schaffe ich es jetzt nicht auf das Handy zuzugreifen. Wenn ich es ans USB anschließe wird es auch nicht als ttyACM0 oder ttyACMirgendwas abgelegt. hwinfo liefert mir zum angeschlossenen Handy:
47: SCSI 400.0: 10600 Disk
[Created at block.244]
UDI: /org/freedesktop/Hal/devices/storage_serial_Motorola_Motorola_Phone_0_0
Unique ID: UfPf.+v2Rv6n1Tn0
Parent ID: vayM.dKudVhbQzb1
SysFS ID: /block/sdb
SysFS BusID: 4:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/host4/target4:0:0/4:0:0:0
Hardware Class: disk
Model: "Motorola Phone"
Vendor: usb 0x22b8 "Motorola"
Device: usb 0x3010 "Motorola Phone"
Revision: "2.31"
Driver: "usb-storage", "sd"
Driver Modules: "usb_storage"
Device File: /dev/sdb (/dev/sg2)
Device Files: /dev/sdb, , /dev/disk/by-path/pci-0000:00:1d.1-usb-0:1:1.0-scsi-0:0:0:0
Device Number: block 8:16-8:31 (char 21:2)
Features: Hotpluggable
Geometry (Logical): CHS 1024/0/62
Speed: 12 Mbps
Module Alias: "usb:v22B8p3010d0001dc00dsc00dp00ic08isc06ip50"
Driver Info #0:
Driver Status: usb_storage is active
Driver Activation Cmd: "modprobe usb_storage"
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #23 (USB Controller)
Was kann ich machen um connecten zu können?
Gruß,
Manni