Hallo und guten Morgen !
Ich benötige Hilfe bei der Rettung von Daten einer älteren Festplatte (1,7GB) mit SuSe Linux 4.4.1 unter OpenSuse 10.2.
Habe OpenSuse 10.2 auf meinen (aktuellen) Notebook als PC, sodass ich die FP an einem älteren Compaq DeskPro EP Series, Pentium III 500Mhz, unter 10.2 intalliert habe (Rechner der Kids .
Beim 'booten' bekomme ich (timeout) Probleme und die FP wird nicht richtig vom System erkannt.
Zeitweise habe ich die Partitionen unter Yast richtig erkannt - bzw. muß ich mit der Option 'failsafe' booten und es werden die Daten auf den Partitionen nicht richtigt erkannt.
Zu Beginn hatte ich Zugriff auf die Daten, doch nach Neustart und fsck traten weitere Probleme auf.
1. Wie kann ich am besten vorab ein komplettes Image der gesamten FP sichern ?
2. Wie und mit welchem Tool kann ich die Linux Filesysteme am besten bzgl. Datensicherung am System anbinden (mounten) ?
Gruß an alle und besten Dank im Voraus
Carsten (Pamplona, Spanien).
Im folgenden die Angaben bzgl. Festplatte, Partitionierung und Fehlermeldungen beim booten
Festplatte: Segate
Typ ST31720A
3305 CYL 1705 MB
16 heads 63 sectors
auf 1. Festplatte 80GB
hda1 windows vfat
hda2 windows vfat
dazu dann in weiteren Partitionen für OpenLinux 10.2
/home
/root
swap
auf 1. Festplatte 1,7 GB folgende Partitionen
504MB Windows
dazu dann die Partitionen für SuSeLinux 4.4.1
50 MB swap
ca. 500MB /home
ca. 500MB /root
/proc/partitions
major minor #blocks name
3 0 78150744 hda
3 1 41953716 hda1
3 2 23342445 hda2
3 3 2168775 hda3
3 4 1 hda4
3 5 5245191 hda5
3 6 5429938 hda6
22 0 1665926 hdc
22 1 515560 hdc1
22 2 517104 hdc2
22 3 51408 hdc3
22 4 581112 hdc4
<7>Probing IDE interface ide1...
<4>hdc: ST31720A, ATA DISK drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hdc: max request size: 128KiB
<6>hdc: 3331852 sectors (1705 MB), CHS=3305/16/63, DMA
<6> hdc:<4>hdc: dma_timer_expiry: dma status == 0x20
<4>hdc: DMA timeout retry
<3>hdc: timeout waiting for DMA
<4>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
<4>ide: failed opcode was: unknown
<3>hdc: drive not ready for command
<4> hdc1 hdc2 hdc3 hdc4
<4>hdc: dma_timer_expiry: dma status == 0x20
<4>hdc: DMA timeout retry
<3>hdc: timeout waiting for DMA
<4>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
<4>ide: failed opcode was: unknown
<3>hdc: drive not ready for command
<6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
<4>hdc: dma_timer_expiry: dma status == 0x20
<4>hdc: DMA timeout retry
<3>hdc: timeout waiting for DMA
<4>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
<4>ide: failed opcode was: unknown
<3>hdc: drive not ready for command
<4>hdc: dma_timer_expiry: dma status == 0x20
<4>hdc: DMA timeout retry
<3>hdc: timeout waiting for DMA
<4>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
<4>ide: failed opcode was: unknown
<3>hdc: drive not ready for command
<4>Attempting manual resume
/var/log/messages
Jan 23 01:51:15 linux-5o2u kernel: st: Version 20050830, fixed bufsize 32768, s/g segs 256
Jan 23 01:51:45 linux-5o2u kernel: hdc: lost interrupt
Jan 23 01:51:45 linux-5o2u kernel: hdc: status error: status=0x58 { DriveReady SeekComplete
DataRequest }
Jan 23 01:51:45 linux-5o2u kernel: ide: failed opcode was: 0xec
Jan 23 01:51:45 linux-5o2u kernel: hdc: drive not ready for command
Jan 23 01:51:45 linux-5o2u kernel: hdc: status error: status=0x58 { DriveReady SeekComplete
DataRequest }
Jan 23 01:51:45 linux-5o2u kernel: ide: failed opcode was: unknown
Jan 23 01:51:45 linux-5o2u kernel: hdc: drive not ready for command
Jan 23 01:51:46 linux-5o2u kernel: hdc: status error: status=0x58 { DriveReady SeekComplete
DataRequest }
Jan 23 02:32:40 linux-5o2u kernel: ide: failed opcode was: unknown
Jan 23 02:32:40 linux-5o2u kernel: hdc: drive not ready for command
Jan 23 02:32:41 linux-5o2u kernel: hdc: task_in_intr: status=0x59 { DriveReady SeekComplete
DataRequest Error }
Jan 23 02:32:41 linux-5o2u kernel: hdc: task_in_intr: error=0x10 { SectorIdNotFound },
LBAsect=69278065, sector=2169200
Jan 23 02:32:41 linux-5o2u kernel: ide: failed opcode was: unknown
Jan 23 02:32:41 linux-5o2u kernel: hdc: status error: status=0x58 { DriveReady SeekComplete
DataRequest }
Ich benötige Hilfe bei der Rettung von Daten einer älteren Festplatte (1,7GB) mit SuSe Linux 4.4.1 unter OpenSuse 10.2.
Habe OpenSuse 10.2 auf meinen (aktuellen) Notebook als PC, sodass ich die FP an einem älteren Compaq DeskPro EP Series, Pentium III 500Mhz, unter 10.2 intalliert habe (Rechner der Kids .
Beim 'booten' bekomme ich (timeout) Probleme und die FP wird nicht richtig vom System erkannt.
Zeitweise habe ich die Partitionen unter Yast richtig erkannt - bzw. muß ich mit der Option 'failsafe' booten und es werden die Daten auf den Partitionen nicht richtigt erkannt.
Zu Beginn hatte ich Zugriff auf die Daten, doch nach Neustart und fsck traten weitere Probleme auf.
1. Wie kann ich am besten vorab ein komplettes Image der gesamten FP sichern ?
2. Wie und mit welchem Tool kann ich die Linux Filesysteme am besten bzgl. Datensicherung am System anbinden (mounten) ?
Gruß an alle und besten Dank im Voraus
Carsten (Pamplona, Spanien).
Im folgenden die Angaben bzgl. Festplatte, Partitionierung und Fehlermeldungen beim booten
Festplatte: Segate
Typ ST31720A
3305 CYL 1705 MB
16 heads 63 sectors
auf 1. Festplatte 80GB
hda1 windows vfat
hda2 windows vfat
dazu dann in weiteren Partitionen für OpenLinux 10.2
/home
/root
swap
auf 1. Festplatte 1,7 GB folgende Partitionen
504MB Windows
dazu dann die Partitionen für SuSeLinux 4.4.1
50 MB swap
ca. 500MB /home
ca. 500MB /root
/proc/partitions
major minor #blocks name
3 0 78150744 hda
3 1 41953716 hda1
3 2 23342445 hda2
3 3 2168775 hda3
3 4 1 hda4
3 5 5245191 hda5
3 6 5429938 hda6
22 0 1665926 hdc
22 1 515560 hdc1
22 2 517104 hdc2
22 3 51408 hdc3
22 4 581112 hdc4
<7>Probing IDE interface ide1...
<4>hdc: ST31720A, ATA DISK drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hdc: max request size: 128KiB
<6>hdc: 3331852 sectors (1705 MB), CHS=3305/16/63, DMA
<6> hdc:<4>hdc: dma_timer_expiry: dma status == 0x20
<4>hdc: DMA timeout retry
<3>hdc: timeout waiting for DMA
<4>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
<4>ide: failed opcode was: unknown
<3>hdc: drive not ready for command
<4> hdc1 hdc2 hdc3 hdc4
<4>hdc: dma_timer_expiry: dma status == 0x20
<4>hdc: DMA timeout retry
<3>hdc: timeout waiting for DMA
<4>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
<4>ide: failed opcode was: unknown
<3>hdc: drive not ready for command
<6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
<4>hdc: dma_timer_expiry: dma status == 0x20
<4>hdc: DMA timeout retry
<3>hdc: timeout waiting for DMA
<4>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
<4>ide: failed opcode was: unknown
<3>hdc: drive not ready for command
<4>hdc: dma_timer_expiry: dma status == 0x20
<4>hdc: DMA timeout retry
<3>hdc: timeout waiting for DMA
<4>hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
<4>ide: failed opcode was: unknown
<3>hdc: drive not ready for command
<4>Attempting manual resume
/var/log/messages
Jan 23 01:51:15 linux-5o2u kernel: st: Version 20050830, fixed bufsize 32768, s/g segs 256
Jan 23 01:51:45 linux-5o2u kernel: hdc: lost interrupt
Jan 23 01:51:45 linux-5o2u kernel: hdc: status error: status=0x58 { DriveReady SeekComplete
DataRequest }
Jan 23 01:51:45 linux-5o2u kernel: ide: failed opcode was: 0xec
Jan 23 01:51:45 linux-5o2u kernel: hdc: drive not ready for command
Jan 23 01:51:45 linux-5o2u kernel: hdc: status error: status=0x58 { DriveReady SeekComplete
DataRequest }
Jan 23 01:51:45 linux-5o2u kernel: ide: failed opcode was: unknown
Jan 23 01:51:45 linux-5o2u kernel: hdc: drive not ready for command
Jan 23 01:51:46 linux-5o2u kernel: hdc: status error: status=0x58 { DriveReady SeekComplete
DataRequest }
Jan 23 02:32:40 linux-5o2u kernel: ide: failed opcode was: unknown
Jan 23 02:32:40 linux-5o2u kernel: hdc: drive not ready for command
Jan 23 02:32:41 linux-5o2u kernel: hdc: task_in_intr: status=0x59 { DriveReady SeekComplete
DataRequest Error }
Jan 23 02:32:41 linux-5o2u kernel: hdc: task_in_intr: error=0x10 { SectorIdNotFound },
LBAsect=69278065, sector=2169200
Jan 23 02:32:41 linux-5o2u kernel: ide: failed opcode was: unknown
Jan 23 02:32:41 linux-5o2u kernel: hdc: status error: status=0x58 { DriveReady SeekComplete
DataRequest }