[gelöst] video schauen ohne admin rechte

fhihu · 9 Aug. 2008

Hallo

Hab heute von Suse 10.2 auf 11 upgedated und nun ist mir aufgefallen, dass ich Videos nur noch als root anschauen kann.
Ich muss also meinen VLC oder MPlayer immer als Root starten, damit ich Videos anschauen kann. Kann man das nicht irgendwie lösen dass man auch als normaler User diese Rechte hat.
Ausserdem ist mir aufgefallen, dass ich auf meine Usb Festplatte nicht mehr zugreifen kann. Festplatte ist Ntfs formatiert. Ich muss sie jetzt jedesmal manuell mounten und dann kann ich auch nur also root darauf zugreifen.

Ist das normal. Hat sich da was in der Rechtvergabe getan in der neuen Suse Version?

mfg Walter

Grothesk · 9 Aug. 2008

Wenn du mal was genaueres zu den Rechten sagen würdest, dann könnte man u. U. sogar helfen.
Rechte an den Programmen lauten?

fhihu · 9 Aug. 2008

Weiß lieder nicht den exakten Befehl. Hat mal auf jedenfall was mit chmod zu tun. So kann man was ändern soweit ich weiß, aber nachschauen. Dateien wüsste ich schon wie nachschauen, aber ausführbare Dateien hab ich leider keine Ahnung.
Ausführen der Player geht ja aber nur nicht das Video.

lg

spoensche · 9 Aug. 2008

Was bekommst du den fpr eine Fehlermeldung? Mit

Code:

ls -l

mal die Filme in deinem Verzeichnis ausgeben lassen und die Ausgabe hier posten.

fhihu · 10 Aug. 2008

Hat sich alles wieder mal geklärt. Hab die Filme kopiert als ich Konqueror mit Admin Rechten ausgeführt hab. Also waren dann auch die Rechte der Dateien demenstprechend. Das komische wenn ich meine USB Festplatte anschließe (mit NTFS) formatiert kommt immer die Fehlermeldung:

Code:

mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so

dmesg gibt dann

Code:

mirta@linux-we9c:~> dmesg
Linux version 2.6.25.11-0.1-pae (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-07-13 20:48:28 +0200
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
 BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
 BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
 BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00ff780] 000ff780
NX (Execute Disable) protection: active
Entering add_active_range(0, 0, 524208) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   524208
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   524208
On node 0 totalpages: 524208
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 2303 pages used for memmap
  HighMem zone: 292529 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
DMI present.
Using APIC driver default
ACPI: RSDP 000F98B0, 0014 (r0 ACPIAM)
ACPI: RSDT 7FFB0000, 0038 (r1 041808 OEMRSDT  20080418 MSFT       97)
ACPI: FACP 7FFB0200, 0084 (r2 041808 OEMFACP  20080418 MSFT       97)
ACPI: DSDT 7FFB0440, 6519 (r1  P0004 P0004000        0 INTL 20051117)
ACPI: FACS 7FFBE000, 0040
ACPI: APIC 7FFB0390, 006C (r1 041808 OEMAPIC  20080418 MSFT       97)
ACPI: MCFG 7FFB0400, 003C (r1 041808 OEMMCFG  20080418 MSFT       97)
ACPI: OEMB 7FFBE040, 0071 (r1 041808 AMI_OEM  20080418 MSFT       97)
ACPI: HPET 7FFB6960, 0038 (r1 041808 OEMHPET  20080418 MSFT       97)
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 0:2 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 0:2 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 0:2 APIC version 16
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Processor #3 0:2 APIC version 16
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8300 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7ff00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520113
Kernel command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD5001ABYS-_WD-WCAS87167105-part2 resume=/dev/sda1 splash=silent vga=0x317
bootsplash: silent mode.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2500.317 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2068460k/2096832k available (1953k kernel code, 27104k reserved, 1676k data, 264k init, 1179328k highmem)
virtual kernel memory layout:
    fixmap  : 0xff8b2000 - 0xfffff000   (7476 kB)
    pkmap   : 0xff400000 - 0xff600000   (2048 kB)
    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0493000 - 0xc04d5000   ( 264 kB)
      .data : 0xc02e85e2 - 0xc048b784   (1676 kB)
      .text : 0xc0100000 - 0xc02e85e2   (1953 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay using timer specific routine.. 5004.11 BogoMIPS (lpj=10008235)
Security Framework initialized
AppArmor: AppArmor initialized <NULL>
AppArmor: Registered secondary security module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(4) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 857 Objects with 64 Devices 244 Methods 18 Regions
 tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
CPU0: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
Booting processor 1/1 ip 4000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5000.33 BogoMIPS (lpj=10000670)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(4) -> Core 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
Booting processor 2/2 ip 4000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5000.34 BogoMIPS (lpj=10000697)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 2(4) -> Core 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
Booting processor 3/3 ip 4000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5000.35 BogoMIPS (lpj=10000717)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 3(4) -> Core 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
Total of 4 processors activated (20005.15 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 4 CPUs
CPU0 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,0000000f
  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000004 00000000,00000000,00000000,00000008
CPU1 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,0000000f
  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000004 00000000,00000000,00000000,00000008 00000000,00000000,00000000,00000001
CPU2 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,0000000f
  groups: 00000000,00000000,00000000,00000004 00000000,00000000,00000000,00000008 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
CPU3 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,0000000f
  groups: 00000000,00000000,00000000,00000008 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000004
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 12 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:.............................................................................................................................................
Initialized 11/18 Regions 24/24 Fields 32/32 Buffers 74/77 Packages (866 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:...
Executed 3 _INI methods requiring 0 _STA executions (examined 74 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Error attaching device data
ACPI: Error attaching device data
ACPI: Error attaching device data
ACPI: Error attaching device data
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:12.0: set SATA to AHCI mode
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  31, should be 28 [20070126]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
 00:08: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
 00:08: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
 00:09: mem resource (0xffb80000-0xffbfffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
 00:09: mem resource (0xfff00000-0xffffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
 00:0d: mem resource (0xe0000000-0xefffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
 00:0e: mem resource (0xfec00000-0xffffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 3 of device 0000:00:00.0
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 32-bit timers, 14318180 Hz
AppArmor: AppArmor Filesystem Enabled
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 3
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x40b-0x40b has been reserved
system 00:09: ioport range 0x4d6-0x4d6 has been reserved
system 00:09: ioport range 0xc00-0xc01 has been reserved
system 00:09: ioport range 0xc14-0xc14 has been reserved
system 00:09: ioport range 0xc50-0xc51 has been reserved
system 00:09: ioport range 0xc52-0xc52 has been reserved
system 00:09: ioport range 0xc6c-0xc6c has been reserved
system 00:09: ioport range 0xc6f-0xc6f has been reserved
system 00:09: ioport range 0xcd0-0xcd1 has been reserved
system 00:09: ioport range 0xcd2-0xcd3 has been reserved
system 00:09: ioport range 0xcd4-0xcd5 has been reserved
system 00:09: ioport range 0xcd6-0xcd7 has been reserved
system 00:09: ioport range 0xcd8-0xcdf has been reserved
system 00:09: ioport range 0x800-0x89f has been reserved
system 00:09: ioport range 0xb10-0xb1f has been reserved
system 00:09: ioport range 0x900-0x90f has been reserved
system 00:09: ioport range 0x910-0x91f has been reserved
system 00:09: ioport range 0xfe00-0xfefe has been reserved
system 00:0c: ioport range 0xe00-0xe0f has been reserved
system 00:0c: ioport range 0xe80-0xe8f has been reserved
system 00:0c: ioport range 0xf40-0xf4f has been reserved
system 00:0c: ioport range 0xa30-0xa3f has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
PCI: Bridge: 0000:00:02.0
  IO window: d000-dfff
  MEM window: 0xfa000000-0xfe9fffff
  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:06.0
  IO window: disabled.
  MEM window: 0xfea00000-0xfeafffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:14.4
  IO window: e000-efff
  MEM window: 0xfeb00000-0xfebfffff
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 5251k freed
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
type=2000 audit(1218463123.768:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
vesafb: framebuffer at 0xfb000000, mapped to 0xf8880000, using 6144k, total 14336k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:b050
vesafb: pmi: set display start = c00cb0b3, set palette = c00cb10e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 166113 bytes
bootsplash: ...found (1024x768, 154167 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
input: PC Speaker as /devices/platform/pcspkr/input/input1
logips2pp: Detected unknown logitech mouse model 105
input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input2
cpuidle: using governor ladder
cpuidle: using governor menu
NET: Registered protocol family 1
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 264k freed
Write protecting the kernel read-only data: 1432k
ACPI: duty_cycle spans bit 4
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: ACPI0007:02 is registered as cooling_device2
ACPI: ACPI0007:03 is registered as cooling_device3
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:14.1 to 64
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
ata1.00: ATA-6: ST3120023A, 3.33, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      ST3120023A       3.33 PQ: 0 ANSI: 5
ahci 0000:00:12.0: version 3.0
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck led clo pio
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xf9fff800 port 0xf9fff900 irq 22
ata4: SATA max UDMA/133 abar m1024@0xf9fff800 port 0xf9fff980 irq 22
ata5: SATA max UDMA/133 abar m1024@0xf9fff800 port 0xf9fffa00 irq 22
ata6: SATA max UDMA/133 abar m1024@0xf9fff800 port 0xf9fffa80 irq 22
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD5001ABYS-01YNA0, 59.01D01, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access     ATA      WDC WD5001ABYS-0 59.0 PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
 sda1 sda2 <<6>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 16, io mem 0xf9ffe000
 sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3
sd 2:0:0:0: [sdb] Attached SCSI disk
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.11-0.1-pae ohci_hcd
usb usb1: SerialNumber: 0000:00:13.0
ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xf9fff000
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.11-0.1-pae ehci_hcd
usb usb2: SerialNumber: 0000:00:13.5
ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xf9ffd000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.11-0.1-pae ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xf9ffc000
hub 2-0:1.0: unable to enumerate USB device on port 2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.11-0.1-pae ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xf9ffb000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.25.11-0.1-pae ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xf9ffa000
usb 1-2: new full speed USB device using ohci_hcd and address 2
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.25.11-0.1-pae ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2: New USB device found, idVendor=03f0, idProduct=6204
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: deskjet 5100
usb 1-2: Manufacturer: hp
usb 1-2: SerialNumber: MY42C4J2VD7A
PM: Starting manual resume from disk
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button (CM) [PWRB]
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
Linux agpgart interface v0.103
usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6204
usbcore: registered new interface driver usblp
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:02:00.0 to 64
atl1 0000:02:00.0: version 2.0.7
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.12  Thu Jul 17 18:11:36 PDT 2008
ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 22 (level, low) -> IRQ 22
ath5k_pci 0000:03:07.0: registered as 'phy0'
phy0: Selected rate control algorithm 'pid'
ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 20 (level, low) -> IRQ 20
Adding 2104472k swap on /dev/sdb1.  Priority:-1 extents:1 across:2104472k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
type=1505 audit(1218463138.215:2): operation="profile_load" name="/bin/ping" name2="default" pid=1733
type=1505 audit(1218463138.236:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1737
type=1505 audit(1218463138.267:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1738
type=1505 audit(1218463138.299:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1739
type=1505 audit(1218463138.397:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1745
type=1505 audit(1218463138.457:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1765
type=1505 audit(1218463138.513:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1779
type=1505 audit(1218463138.565:9): operation="profile_load" name="/usr/sbin/named" name2="default" pid=1781
type=1505 audit(1218463138.591:10): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1782
type=1505 audit(1218463138.627:11): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1783
powernow-k8: Found 1 AMD Phenom(tm) 9850 Quad-Core Processor processors (4 cpu cores) (version 2.20.00)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
powernow: This module only works with AMD K7 CPUs
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
printk: 3 messages suppressed.
ath5k phy0: noise floor calibration failed (2417MHz)
wlan0: failed to set freq to 2417 MHz for scan
NET: Registered protocol family 17
wlan0: failed to set freq to 2427 MHz for scan
bootsplash: status on console 0 changed to on
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU0 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,0000000f
  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000004 00000000,00000000,00000000,00000008
CPU1 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,0000000f
  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000004 00000000,00000000,00000000,00000008 00000000,00000000,00000000,00000001
CPU2 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,0000000f
  groups: 00000000,00000000,00000000,00000004 00000000,00000000,00000000,00000008 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
CPU3 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,0000000f
  groups: 00000000,00000000,00000000,00000008 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000004
printk: 3 messages suppressed.
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
wlan0: authenticate with AP 00:13:46:1d:4a:f4
wlan0: authenticated
wlan0: associate with AP 00:13:46:1d:4a:f4
wlan0: RX AssocResp from 00:13:46:1d:4a:f4 (capab=0x431 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
wlan0: No ProbeResp from current AP 00:13:46:1d:4a:f4 - assume out of range
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
wlan0: authenticate with AP 00:13:46:1d:4a:f4
wlan0: authenticated
wlan0: associate with AP 00:13:46:1d:4a:f4
wlan0: RX ReassocResp from 00:13:46:1d:4a:f4 (capab=0x431 status=0 aid=1)
wlan0: associated
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration timeout (2437MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2437 Mhz)
wlan0: failed to set freq to 2437 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration timeout (2437MHz)
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: noise floor calibration failed (2427MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
usb 2-10: new high speed USB device using ehci_hcd and address 3
usb 2-10: configuration #1 chosen from 1 choice
usb 2-10: New USB device found, idVendor=059f, idProduct=0c41
usb 2-10: New USB device strings: Mfr=10, Product=11, SerialNumber=5
usb 2-10: Product: LaCie Hard Drive USB
usb 2-10: Manufacturer: LaCie
usb 2-10: SerialNumber: 152D203380B6
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 6:0:0:0: Direct-Access     SAMSUNG  HM320JI               PQ: 0 ANSI: 2 CCS
sd 6:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 00 38 00 00
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 00 38 00 00
sd 6:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
NTFS driver 2.1.29 [Flags: R/W MODULE].
NTFS-fs error (device sdc1): parse_options(): Unrecognized mount option locale.
NTFS-fs warning (device sdc1): parse_options(): Option utf8 is no longer supported, using option nls=utf8. Please use option nls=utf8 in the future and make sure utf8 is compiled either as a module or into the kernel.
NTFS-fs error (device sdc1): parse_options(): Unrecognized mount option locale.
NTFS-fs warning (device sdc1): parse_options(): Option utf8 is no longer supported, using option nls=utf8. Please use option nls=utf8 in the future and make sure utf8 is compiled either as a module or into the kernel.
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
mirta@linux-we9c:~>

ich kann die Festplatte dann immer nur manuell als Admin mounten

mount -t ntfs /dev/sdc1 /disk/windows

in den Ordner /mnt/ geht nicht

Code:

linux-we9c:/disk # ls -l
insgesamt 12
dr-x------ 1 root root 12288 10. Aug 16:50 windows

der Ordner ist dann geschützt, ich kann nur als Admin darauf zugreifen und wenn ich die Rechte ändern will kommt

Code:

Berechtigungen für /disk/windows können nicht geändert werden.

Dann hab ichs mal mit dem ntfs-3g Treiber versucht, scheint auch nichts so gut zu gehen

Code:

linux-we9c:/home/mirta # mount -t ntfs -3g /dev/sdc1 /disk/windows
mount: Ungültige Option -- 3
Aufruf: mount -V                 : Version ausgeben
        mount -h                 : Diese Hilfe ausgeben
        mount                    : eingehängte Dateisysteme auflisten
        mount -l                 : dito, inklusive Volume-Label
So weit mit dem informativen Part. Als nächstes das Einhängen.
Der Befehl lautet „mount [-t fstype] irgendwas irgendwo“.
Details, die in /etc/fstab stehen, können weggelassen werden.
        mount -a [-t|-O] …       : alles aus der /etc/fstab einhängen
        mount gerät              : Gerät an bekanntem Ort einhängen
        mount verzeichnis        : hier bekanntes Gerät einhängen
        mount -t typ ger verz    : normaler Mount-Befehl
Beachten Sie, dass man nicht wirklich ein Gerät einhängt, sondern vielmehr
ein Dateisystem (vom gegebenen Typ), dass sich auf dem Gerät befindet.
Man kann auch einen schon sichtbaren Verzeichnisbaum woanders einhängen:
        mount --bind altesVerz neuesVerz
oder einen Unterbaum verschieben:
        mount --move altesVerz neuesVerz
Die Einhängeart in einem Verzeichnis kann geändert werden:
       mount --make-shared verz
       mount --make-slave verz
       mount --make-private verz
       mount --make-unbindable verz
Und das ganze rekursiv:
       mount --make-rshared verz
       mount --make-rslave verz
       mount --make-rprivate verz
       mount --make-runbindable verz
Ein Gerät kann über seinen Namen, also /dev/hda1 oder /dev/cdrom, gegeben
werden, oder über sein Label, mittels -L Label, oder über die UUID, mit -U UUID.
Weitere Optionen: [-nfFrsvw] [-o optionen] [-p passwdfd].
Für viele weitere Details: man 8 mount.
linux-we9c:/home/mirta #

ist halt wieder voll merkwürdig weil es nervt immer manuell zu mounten müssen bzw. immer als Admin drauf zugreifen müssen. Was könnte ich da machen? Wie aus den letzten Zeilen von dmesg hervorgeht, scheint es was mit utf8 zu tun zu haben. Könnte es daran liegen? Danke

lg walter

Grothesk · 10 Aug. 2008

Fütter die Suchfunktion mit der Meldung. Ist hier schon öfter aufgetaucht.

spoensche · 26 Aug. 2008

ntfs-3g wird zusammen geschrieben, ohne Leerzeichen.

fhihu · 27 Apr. 2009

danke. Funktioniert jetzt wieder.