Erstmal wünsche ich einen schönen guten Tag und Gruß aus Hamburg,und ich hoffe das ich jetzt alles richtig gemacht habe nicht wie bei meinem ersten Beitrag :roll: Ich habe Open Suse 11.1 installiert und komme mit meiner PCMCIA DVB-T Karte nicht weiter. Sie ist wohl installiert aber ich bekomme beim Sndersuchlauf keinen Empfang.
Hier mal ein Auszug der /sbin/lspci und der /usr/sbin/hwinfo --tv
und hier der hwinfo --tv
Ich weiß nicht mehr weiter hat jemand von euch eine Idee.??
Bitte wenn Ihr antwortet dann bitte genau erklären was ich machen soll, da ich mich noch nicht so gut auskenne mit Linux. Vielen Dank für eure Hilfe
Hier mal ein Auszug der /sbin/lspci und der /usr/sbin/hwinfo --tv
Code:
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE)
02:05.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
02:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
02:09.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
02:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
03:00.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
und hier der hwinfo --tv
Code:
22: PCI 300.0: 11200 TV Card
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1131_7133
Unique ID: svHJ.b5Dp+RiREoC
Parent ID: t2XO.331xpP4yORB
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:02:09.0/0000:03:00.0
SysFS BusID: 0000:03:00.0
Hardware Class: tv card
Model: "Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder"
Vendor: pci 0x1131 "Philips Semiconductors"
Device: pci 0x7133 "SAA7131/SAA7133/SAA7135 Video Broadcast Decoder"
SubVendor: pci 0x1461 "Avermedia Technologies Inc"
SubDevice: pci 0xf436
Revision: 0xd1
Driver: "saa7134"
Driver Modules: "saa7134"
Memory Range: 0x34000000-0x340007ff (rw,non-prefetchable)
IRQ: 20 (no events)
Module Alias: "pci:v00001131d00007133sv00001461sd0000F436bc04sc80i00"
Driver Info #0:
Driver Status: saa7134 is active
Driver Activation Cmd: "modprobe saa7134"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #19 (CardBus bridge)
Ich weiß nicht mehr weiter hat jemand von euch eine Idee.??
Bitte wenn Ihr antwortet dann bitte genau erklären was ich machen soll, da ich mich noch nicht so gut auskenne mit Linux. Vielen Dank für eure Hilfe