-
Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.
[geschlosse - nicht gelöst] Sound geht aber kein Bass
- Ersteller wichita_c12ca
- Erstellt am
OP
LFE voll aufgedreht: alles ist genau wie vorher :-(
so und hier dann die ausgabe von hwinfo --sound:
warum ich der einzige bin, kann ich auch nicht erklären
so und hier dann die ausgabe von hwinfo --sound:
Code:
linux-68t4:/home/** # hwinfo --sound
11: PCI 11.5: 0401 Multimedia audio controller
[Created at pci.310]
UDI: /org/freedesktop/Hal/devices/pci_1106_3059
Unique ID: Ssy1.9AV7_TQKN47
SysFS ID: /devices/pci0000:00/0000:00:11.5
SysFS BusID: 0000:00:11.5
Hardware Class: sound
Model: "VIA VT8233/A/8235/8237 AC97 Audio Controller"
Vendor: pci 0x1106 "VIA Technologies, Inc."
Device: pci 0x3059 "VT8233/A/8235/8237 AC97 Audio Controller"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x8095 "A7V8X Motherboard (Realtek ALC650 codec)"
Revision: 0x50
Driver: "VIA 82xx Audio"
Driver Modules: "snd_via82xx"
I/O Ports: 0xe000-0xe0ff (rw)
IRQ: 22 (200 events)
Module Alias: "pci:v00001106d00003059sv00001043sd00008095bc04sc01i00"
Driver Info #0:
Driver Status: snd_via82xx is active
Driver Activation Cmd: "modprobe snd_via82xx"
Config Status: cfg=no, avail=yes, need=no, active=unknownwarum ich der einzige bin, kann ich auch nicht erklären
Sorry mitr fällt definitiv nichts mehr dazu ein.
Vor allem wenn das unter Windows funktioniert, dann sind ja auch eventuelle Stecker/Hardware Probleme Blödsinn.
Die geladenen Module und der Rest scheint IMHO jedenfalls zu passen. :???:
Wird zwar nicht viel bringen aber zeig uns das trotzdem mal bitte.
Vor allem wenn das unter Windows funktioniert, dann sind ja auch eventuelle Stecker/Hardware Probleme Blödsinn.
Die geladenen Module und der Rest scheint IMHO jedenfalls zu passen. :???:
Wird zwar nicht viel bringen aber zeig uns das trotzdem mal bitte.
Code:
cat /etc/modprobe.d/sound
OP
ja unter Windows läuft alles super.
Ich denke es liegt an der Einstellung 'Mitten- und Subwooferausgang vertauschen' die der Linux Treiber mir nicht bietet.
hier die Ausgabe:
Ich denke es liegt an der Einstellung 'Mitten- und Subwooferausgang vertauschen' die der Linux Treiber mir nicht bietet.
hier die Ausgabe:
Code:
***@***:~> cat /etc/modprobe.d/sound
options snd slots=snd-via82xx
# Ssy1.9AV7_TQKN47:A7V8X Motherboard (Realtek ALC650 codec)
alias snd-card-0 snd-via82xx
OP
damit ich wenigstens ordentlich musik hören kann hab ich folgendes als notlösung gemacht:
ich hab einfach deas kabel für sourround und das für center+subwoofer sowohl an der sound"karte" als auch am verstärker abgezogen.
dadurch wird 5.1 abgeschaltet und ich bekomm nur noch stereo sound. ist ganz akzeptabel.
aber wenn jemand noch irgendeine kleine idee hat dann würde ich mich sehr darüber freuen!!!
ich hab einfach deas kabel für sourround und das für center+subwoofer sowohl an der sound"karte" als auch am verstärker abgezogen.
dadurch wird 5.1 abgeschaltet und ich bekomm nur noch stereo sound. ist ganz akzeptabel.
aber wenn jemand noch irgendeine kleine idee hat dann würde ich mich sehr darüber freuen!!!
Eine dieser Optionen könnte dir helfen:
Sehe (suse11): /usr/src/linux/Documentation/sound/alsa/ALSA-Configuration.txt
Die Option müsste dann da rein :
xxxxxxxxx:~> cat /etc/modprobe.d/sound
options snd slots=snd-via82xx ac97_quirk=alc_jack
# Ssy1.9AV7_TQKN47:A7V8X Motherboard (Realtek ALC650 codec)
alias snd-card-0 snd-via82xx
Danach Restart von Alsa:
oder Reboot.
MfG
misiu
AC97 Quirk Option
=================
The ac97_quirk option is used to enable/override the workaround for
specific devices on drivers for on-board AC'97 controllers like
snd-intel8x0. Some hardware have swapped output pins between Master
and Headphone, or Surround (thanks to confusion of AC'97
specifications from version to version
The driver provides the auto-detection of known problematic devices,
but some might be unknown or wrongly detected. In such a case, pass
the proper value with this option.
The following strings are accepted:
- default Don't override the default setting
- none Disable the quirk
- hp_only Bind Master and Headphone controls as a single control
- swap_hp Swap headphone and master controls
- swap_surround Swap master and surround controls
- ad_sharing For AD1985, turn on OMS bit and use headphone
- alc_jack For ALC65x, turn on the jack sense mode
- inv_eapd Inverted EAPD implementation
- mute_led Bind EAPD bit for turning on/off mute LED
For backward compatibility, the corresponding integer value -1, 0,
... are accepted, too.
For example, if "Master" volume control has no effect on your device
but only "Headphone" does, pass ac97_quirk=hp_only module option.
Sehe (suse11): /usr/src/linux/Documentation/sound/alsa/ALSA-Configuration.txt
Die Option müsste dann da rein :
xxxxxxxxx:~> cat /etc/modprobe.d/sound
options snd slots=snd-via82xx ac97_quirk=alc_jack
# Ssy1.9AV7_TQKN47:A7V8X Motherboard (Realtek ALC650 codec)
alias snd-card-0 snd-via82xx
Danach Restart von Alsa:
Code:
rcalsasound stop
rcalsasound startMfG
misiu
OP
bei mir existiert der ordner /usr/src/linux/ gar nicht, und damit natürlich auch keiner der unterordner.
ich habe in /usr/src/ nur zwei andere ordner, die je 2 dateien enthalten.
nachdem ich die option in /etc/modprobe.d/sound hinzugefügt habe, und alsa beendet habe, kommt beim starten folgendes:
wenn ich nach der änderung einfach das system neustarte, funktioniert danach der sound nicht mehr.
ich habe in /usr/src/ nur zwei andere ordner, die je 2 dateien enthalten.
nachdem ich die option in /etc/modprobe.d/sound hinzugefügt habe, und alsa beendet habe, kommt beim starten folgendes:
Code:
rcalsasound start
***:~ # Starting sound driver: via82xxWARNING: Error inserting snd (/lib/modules/2.6.25.18-0.1-pae/kernel/sound/core/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_seq_device (/lib/modules/2.6.25.18-0.1-pae/kernel/sound/core/seq/snd-seq-device.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_rawmidi (/lib/modules/2.6.25.18-0.1-pae/kernel/sound/core/snd-rawmidi.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_mpu401_uart (/lib/modules/2.6.25.18-0.1-pae/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.25.18-0.1-pae/kernel/sound/core/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_pcm (/lib/modules/2.6.25.18-0.1-pae/kernel/sound/core/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.25.18-0.1-pae/kernel/sound/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_via82xx (/lib/modules/2.6.25.18-0.1-pae/kernel/sound/pci/snd-via82xx.ko): Unknown symbol in module, or unknown parameter (see dmesg)wenn ich nach der änderung einfach das system neustarte, funktioniert danach der sound nicht mehr.
OP
also meine /etc/modprobe.d/sound sieht nach der änderung so aus:
dmesg sagt das:
ich denke das hier sagt alles:
hat das auch was damit zu tun, dass bei mir
/usr/src/linux/Documentation/sound/alsa/ALSA-Configuration.txt
nicht existiert, oder besser der pfad nur bis
/usr/src/
vorhanden ist?
muss ich noch irgendwas dazuinstallieren?
Code:
***:~ # cat /etc/modprobe.d/sound
options snd slots=snd-via82xx ac97_quirk=alc_jack
# Ssy1.9AV7_TQKN47:A7V8X Motherboard (Realtek ALC650 codec)
alias snd-card-0 snd-via82xxdmesg sagt das:
Code:
Linux version 2.6.25.18-0.2-pae (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-10-21 16:30:26 +0200
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000006fffc000 (usable)
BIOS-e820: 000000006fffc000 - 000000006ffff000 (ACPI data)
BIOS-e820: 000000006ffff000 - 0000000070000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
895MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Entering add_active_range(0, 0, 458748) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 458748
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 458748
On node 0 totalpages: 458748
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 1791 pages used for memmap
HighMem zone: 227581 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000F5FB0, 0014 (r0 ASUS )
ACPI: RSDT 6FFFC000, 0030 (r1 ASUS A7V8X 42302E31 MSFT 31313031)
ACPI: FACP 6FFFC0B2, 0074 (r1 ASUS A7V8X 42302E31 MSFT 31313031)
ACPI: DSDT 6FFFC126, 2839 (r1 ASUS A7V8X 1000 MSFT 100000B)
ACPI: FACS 6FFFF000, 0040
ACPI: BOOT 6FFFC030, 0028 (r1 ASUS A7V8X 42302E31 MSFT 31313031)
ACPI: APIC 6FFFC058, 005A (r1 ASUS A7V8X 42302E31 MSFT 31313031)
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 70000000:8ec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 455165
Kernel command line: root=/dev/disk/by-id/scsi-SATA_Maxtor_4G120J6_G60J1DEE-part6 resume=/dev/sda5 splash=silent vga=0x31a
bootsplash: silent mode.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1800.231 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1808736k/1834992k available (1954k kernel code, 25040k reserved, 1679k data, 264k init, 917488k highmem)
virtual kernel memory layout:
fixmap : 0xff8b2000 - 0xfffff000 (7476 kB)
pkmap : 0xff400000 - 0xff600000 (2048 kB)
vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0495000 - 0xc04d7000 ( 264 kB)
.data : 0xc02e8aea - 0xc048c784 (1679 kB)
.text : 0xc0100000 - 0xc02e8aea (1954 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 3603.90 BogoMIPS (lpj=7207801)
Security Framework initialized
AppArmor: AppArmor initialized <NULL>
AppArmor: Registered secondary security module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 18k freed
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 332 Objects with 46 Devices 116 Methods 15 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
CPU0: AMD Athlon(TM) XP 2200+ stepping 00
Total of 1 processors activated (3603.90 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000001
groups: 00000000,00000000,00000000,00000001
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf1710, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 0 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:............................................
Initialized 10/15 Regions 2/2 Fields 21/21 Buffers 11/11 Packages (341 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 0 _STA executions (examined 49 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:11.0: quirk: region e400-e47f claimed by vt8235 PM
pci 0000:00:11.0: quirk: region e800-e80f claimed by vt8235 SMB
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14) *9
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
AppArmor: AppArmor Filesystem Enabled
ACPI: RTC can wake from S4
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x6fffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:02: ioport range 0xe400-0xe47f has been reserved
system 00:02: ioport range 0xe800-0xe81f could not be reserved
system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:0f: ioport range 0x290-0x291 has been reserved
system 00:0f: ioport range 0x370-0x372 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 0xf2000000-0xf35fffff
PREFETCH window: 0x00000000f3700000-0x00000000f7ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 5344k freed
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
type=2000 audit(1225131295.636:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
pci 0000:01:00.0: Boot video device
vesafb: framebuffer at 0xf4000000, mapped to 0xf8880000, using 10240k, total 65536k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: protected mode interface info at c000:ea90
vesafb: pmi: set display start = c00cead5, set palette = c00ceb5a
vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 208945 bytes
bootsplash: ...found (1280x1024, 220863 bytes, v3).
Console: switching to colour frame buffer device 156x60
Switched to high resolution mode on CPU 0
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
NET: Registered protocol family 1
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 264k freed
Write protecting the kernel read-only data: 1436k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ACPI: ACPI0007:00 is registered as cooling_device0
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
pata_via 0000:00:11.1: version 0.3.3
ACPI: Unable to derive IRQ for device 0000:00:11.1
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa400 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa408 irq 15
logips2pp: Detected unknown logitech mouse model 127
ata1.00: ATA-6: Maxtor 4G120J6, GAK819K0, max UDMA/133
ata1.00: 240121728 sectors, multi 16: LBA48
ata1.00: configured for UDMA/133
input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input2
ata2.00: ATAPI: TOSHIBA DVD-ROM SD-M1612, 1004, max UDMA/33
ata2.01: ATAPI: PHILIPS DVDR1640P, P3.0, max UDMA/33
ata2.00: configured for UDMA/33
ata2.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA Maxtor 4G120J6 GAK8 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1612 1004 PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM PHILIPS DVDR1640P P3.0 PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:0f.0: UHCI Host Controller
uhci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:0f.0: irq 18, io base 0x0000d000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB)
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.18-0.2-pae uhci_hcd
usb usb1: SerialNumber: 0000:00:0f.0
ACPI: PCI Interrupt 0000:00:0f.2[C] -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:0f.2: EHCI Host Controller
ehci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:0f.2: irq 16, io mem 0xf0800000
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
ehci_hcd 0000:00:0f.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.18-0.2-pae ehci_hcd
usb usb2: SerialNumber: 0000:00:0f.2
sda6<6>ACPI: PCI Interrupt 0000:00:0f.1[B] -> GSI 19 (level, low) -> IRQ 19
sda7 > sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
uhci_hcd 0000:00:0f.1: UHCI Host Controller
uhci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:0f.1: irq 19, io base 0x0000b800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.18-0.2-pae uhci_hcd
usb usb3: SerialNumber: 0000:00:0f.1
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
hub 2-0:1.0: unable to enumerate USB device on port 1
ehci_hcd 0000:00:10.3: irq 21, io mem 0xf0000000
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.18-0.2-pae ehci_hcd
usb usb4: SerialNumber: 0000:00:10.3
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.25.18-0.2-pae uhci_hcd
usb usb5: SerialNumber: 0000:00:10.0
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
usb 1-1: new full speed USB device using uhci_hcd and address 2
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.25.18-0.2-pae uhci_hcd
usb usb6: SerialNumber: 0000:00:10.1
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000a800
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: New USB device found, idVendor=04a9, idProduct=220e
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: CanoScan
usb 1-1: Manufacturer: Canon
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.25.18-0.2-pae uhci_hcd
usb usb7: SerialNumber: 0000:00:10.2
hub 4-0:1.0: unable to enumerate USB device on port 1
PM: Starting manual resume from disk
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usb 5-1: New USB device found, idVendor=04e6, idProduct=0325
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 5-1: Product: eUSB ORCA Quad Reader
usb 5-1: Manufacturer: SCM Microsystems Inc.
usb 5-1: SerialNumber: 00000000009B
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.103
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button (CM) [PWRB]
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
scsi 1:0:1:0: Attached scsi generic sg2 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: AGP aperture is 64M @ 0xf8000000
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 17 (level, low) -> IRQ 17
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[f1800000-f18007ff] Max Packet=[2048] IR/IT contexts=[8/8]
scsi 2:0:0:0: Direct-Access eUSB Compact Flash 5.07 PQ: 0 ANSI: 2
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg3 type 0
scsi 2:0:0:1: Direct-Access eUSB SD-MS-SM 5.07 PQ: 0 ANSI: 2
sd 2:0:0:1: [sdc] Attached SCSI removable disk
sd 2:0:0:1: Attached scsi generic sg4 type 0
usb-storage: device scan complete
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x200, speed 1193kHz
NET: Registered protocol family 23
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000005ab0e]
ppdev: user-space parallel port driver
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 18
ssb: Sonics Silicon Backplane found on PCI device 0000:00:09.0
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:e0:18:95:bc:59
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:11.5 to 64
alsactl[1244]: segfault at 0 ip b7e83f83 sp bfb897fc error 4 in libc-2.8.so[b7e11000+13d000]
Adding 2104472k swap on /dev/sda5. Priority:-1 extents:1 across:2104472k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
type=1505 audit(1225127715.376:2): operation="profile_load" name="/bin/ping" name2="default" pid=1402
type=1505 audit(1225127715.432:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1413
type=1505 audit(1225127715.512:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1414
type=1505 audit(1225127715.612:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1416
type=1505 audit(1225127715.720:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1422
type=1505 audit(1225127715.864:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1424
type=1505 audit(1225127715.972:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1425
type=1505 audit(1225127716.152:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1426
type=1505 audit(1225127716.264:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1437
type=1505 audit(1225127716.340:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1441
powernow-k8: Processor cpuid 680 not supported
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ip_tables: (C) 2000-2006 Netfilter Core Team
bootsplash: status on console 0 changed to on
eth0: no IPv6 routers present
ACPI: PCI interrupt for device 0000:00:11.5 disabled
printk: 1 messages suppressed.
alsactl[3297]: segfault at 0 ip b7e06f83 sp bff0ab7c error 4 in libc-2.8.so[b7d94000+13d000]
snd: Unknown parameter `ac97_quirk'
snd_seq_device: Unknown symbol snd_info_register
snd_seq_device: Unknown symbol snd_info_create_module_entry
snd_seq_device: Unknown symbol snd_info_free_entry
snd_seq_device: Unknown symbol snd_seq_root
snd_seq_device: Unknown symbol snd_verbose_printk
snd_seq_device: Unknown symbol snd_iprintf
snd_seq_device: Unknown symbol snd_device_new
snd_rawmidi: Unknown symbol snd_verbose_printd
snd_rawmidi: Unknown symbol snd_info_register
snd_rawmidi: Unknown symbol snd_seq_device_new
snd_rawmidi: Unknown symbol snd_info_free_entry
snd_rawmidi: Unknown symbol snd_unregister_oss_device
snd_rawmidi: Unknown symbol snd_verbose_printk
snd_rawmidi: Unknown symbol snd_register_oss_device
snd_rawmidi: Unknown symbol snd_ctl_register_ioctl
snd_rawmidi: Unknown symbol snd_card_file_add
snd_rawmidi: Unknown symbol snd_iprintf
snd_rawmidi: Unknown symbol snd_major
snd_rawmidi: Unknown symbol snd_oss_info_register
snd_rawmidi: Unknown symbol snd_unregister_device
snd_rawmidi: Unknown symbol snd_device_new
snd_rawmidi: Unknown symbol snd_ctl_unregister_ioctl
snd_rawmidi: Unknown symbol snd_lookup_oss_minor_data
snd_rawmidi: Unknown symbol snd_lookup_minor_data
snd_rawmidi: Unknown symbol snd_info_create_card_entry
snd_rawmidi: Unknown symbol snd_card_file_remove
snd_rawmidi: Unknown symbol snd_register_device_for_dev
snd_rawmidi: Unknown symbol snd_device_register
snd_mpu401_uart: Unknown symbol snd_rawmidi_receive
snd_mpu401_uart: Unknown symbol snd_verbose_printk
snd_mpu401_uart: Unknown symbol snd_rawmidi_transmit_ack
snd_mpu401_uart: Unknown symbol release_and_free_resource
snd_mpu401_uart: Unknown symbol snd_rawmidi_transmit_peek
snd_mpu401_uart: Unknown symbol snd_rawmidi_new
snd_mpu401_uart: Unknown symbol snd_rawmidi_set_ops
snd_mpu401_uart: Unknown symbol snd_device_free
snd_timer: Unknown symbol snd_verbose_printd
snd_timer: Unknown symbol snd_info_register
snd_timer: Unknown symbol snd_info_create_module_entry
snd_timer: Unknown symbol snd_info_free_entry
snd_timer: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_iprintf
snd_timer: Unknown symbol snd_ecards_limit
snd_timer: Unknown symbol snd_oss_info_register
snd_timer: Unknown symbol snd_unregister_device
snd_timer: Unknown symbol snd_device_new
snd_timer: Unknown symbol snd_register_device_for_dev
snd_pcm: Unknown symbol snd_verbose_printd
snd_pcm: Unknown symbol snd_info_register
snd_pcm: Unknown symbol snd_info_create_module_entry
snd_pcm: Unknown symbol snd_timer_notify
snd_pcm: Unknown symbol snd_timer_interrupt
snd_pcm: Unknown symbol snd_info_free_entry
snd_pcm: Unknown symbol snd_add_device_sysfs_file
snd_pcm: Unknown symbol snd_info_get_str
snd_pcm: Unknown symbol snd_verbose_printk
snd_pcm: Unknown symbol snd_ctl_register_ioctl
snd_pcm: Unknown symbol snd_card_file_add
snd_pcm: Unknown symbol snd_iprintf
snd_pcm: Unknown symbol snd_major
snd_pcm: Unknown symbol snd_unregister_device
snd_pcm: Unknown symbol snd_timer_new
snd_pcm: Unknown symbol snd_device_new
snd_pcm: Unknown symbol snd_ctl_unregister_ioctl
snd_pcm: Unknown symbol snd_lookup_minor_data
snd_pcm: Unknown symbol snd_info_create_card_entry
snd_pcm: Unknown symbol snd_power_wait
snd_pcm: Unknown symbol snd_device_free
snd_pcm: Unknown symbol snd_card_file_remove
snd_pcm: Unknown symbol snd_register_device_for_dev
snd_pcm: Unknown symbol snd_device_register
snd_pcm: Unknown symbol snd_info_get_line
snd_ac97_codec: Unknown symbol snd_info_register
snd_ac97_codec: Unknown symbol snd_ctl_add
snd_ac97_codec: Unknown symbol snd_info_free_entry
snd_ac97_codec: Unknown symbol snd_interval_refine
snd_ac97_codec: Unknown symbol snd_ctl_find_id
snd_ac97_codec: Unknown symbol snd_verbose_printk
snd_ac97_codec: Unknown symbol snd_ctl_new1
snd_ac97_codec: Unknown symbol snd_ctl_remove_id
snd_ac97_codec: Unknown symbol snd_component_add
snd_ac97_codec: Unknown symbol snd_pcm_hw_rule_add
snd_ac97_codec: Unknown symbol snd_iprintf
snd_ac97_codec: Unknown symbol snd_ctl_boolean_mono_info
snd_ac97_codec: Unknown symbol snd_device_new
snd_ac97_codec: Unknown symbol snd_info_create_card_entry
snd_ac97_codec: Unknown symbol snd_info_get_line
snd_via82xx: Unknown symbol snd_verbose_printd
snd_via82xx: Unknown symbol snd_ctl_add
snd_via82xx: Unknown symbol snd_ac97_resume
snd_via82xx: Unknown symbol snd_pcm_new
snd_via82xx: Unknown symbol snd_pcm_limit_hw_rates
snd_via82xx: Unknown symbol snd_card_register
snd_via82xx: Unknown symbol snd_card_free
snd_via82xx: Unknown symbol snd_pcm_lib_preallocate_pages_for_all
snd_via82xx: Unknown symbol snd_card_proc_new
snd_via82xx: Unknown symbol snd_ac97_set_rate
snd_via82xx: Unknown symbol snd_pcm_format_physical_width
snd_via82xx: Unknown symbol snd_ac97_update_bits
snd_via82xx: Unknown symbol snd_ac97_mixer
snd_via82xx: Unknown symbol snd_ac97_bus
snd_via82xx: Unknown symbol snd_ctl_find_id
snd_via82xx: Unknown symbol snd_verbose_printk
snd_via82xx: Unknown symbol snd_ctl_new1
snd_via82xx: Unknown symbol snd_ac97_update_power
snd_via82xx: Unknown symbol snd_card_new
snd_via82xx: Unknown symbol snd_ac97_suspend
snd_via82xx: Unknown symbol snd_iprintf
snd_via82xx: Unknown symbol snd_pcm_lib_malloc_pages
snd_via82xx: Unknown symbol snd_ctl_boolean_mono_info
snd_via82xx: Unknown symbol snd_pcm_lib_ioctl
snd_via82xx: Unknown symbol release_and_free_resource
snd_via82xx: Unknown symbol snd_pcm_lib_free_pages
snd_via82xx: Unknown symbol snd_pcm_set_ops
snd_via82xx: Unknown symbol snd_pcm_hw_constraint_list
snd_via82xx: Unknown symbol snd_device_new
snd_via82xx: Unknown symbol snd_pcm_sgbuf_ops_page
snd_via82xx: Unknown symbol snd_mpu401_uart_interrupt
snd_via82xx: Unknown symbol snd_ac97_get_short_name
snd_via82xx: Unknown symbol snd_pcm_suspend_all
snd_via82xx: Unknown symbol snd_card_disconnect
snd_via82xx: Unknown symbol snd_pcm_hw_constraint_integer
snd_via82xx: Unknown symbol snd_pci_quirk_lookup
snd_via82xx: Unknown symbol snd_mpu401_uart_new
snd_via82xx: Unknown symbol snd_pcm_period_elapsed
snd_via82xx: Unknown symbol snd_ac97_tune_hardware
snd: Unknown parameter `ac97_quirk'
snd_seq_device: Unknown symbol snd_info_register
snd_seq_device: Unknown symbol snd_info_create_module_entry
snd_seq_device: Unknown symbol snd_info_free_entry
snd_seq_device: Unknown symbol snd_seq_root
snd_seq_device: Unknown symbol snd_verbose_printk
snd_seq_device: Unknown symbol snd_iprintf
snd_seq_device: Unknown symbol snd_device_new
snd_rawmidi: Unknown symbol snd_verbose_printd
snd_rawmidi: Unknown symbol snd_info_register
snd_rawmidi: Unknown symbol snd_seq_device_new
snd_rawmidi: Unknown symbol snd_info_free_entry
snd_rawmidi: Unknown symbol snd_unregister_oss_device
snd_rawmidi: Unknown symbol snd_verbose_printk
snd_rawmidi: Unknown symbol snd_register_oss_device
snd_rawmidi: Unknown symbol snd_ctl_register_ioctl
snd_rawmidi: Unknown symbol snd_card_file_add
snd_rawmidi: Unknown symbol snd_iprintf
snd_rawmidi: Unknown symbol snd_major
snd_rawmidi: Unknown symbol snd_oss_info_register
snd_rawmidi: Unknown symbol snd_unregister_device
snd_rawmidi: Unknown symbol snd_device_new
snd_rawmidi: Unknown symbol snd_ctl_unregister_ioctl
snd_rawmidi: Unknown symbol snd_lookup_oss_minor_data
snd_rawmidi: Unknown symbol snd_lookup_minor_data
snd_rawmidi: Unknown symbol snd_info_create_card_entry
snd_rawmidi: Unknown symbol snd_card_file_remove
snd_rawmidi: Unknown symbol snd_register_device_for_dev
snd_rawmidi: Unknown symbol snd_device_register
snd_mpu401_uart: Unknown symbol snd_rawmidi_receive
snd_mpu401_uart: Unknown symbol snd_verbose_printk
snd_mpu401_uart: Unknown symbol snd_rawmidi_transmit_ack
snd_mpu401_uart: Unknown symbol release_and_free_resource
snd_mpu401_uart: Unknown symbol snd_rawmidi_transmit_peek
snd_mpu401_uart: Unknown symbol snd_rawmidi_new
snd_mpu401_uart: Unknown symbol snd_rawmidi_set_ops
snd_mpu401_uart: Unknown symbol snd_device_free
snd_timer: Unknown symbol snd_verbose_printd
snd_timer: Unknown symbol snd_info_register
snd_timer: Unknown symbol snd_info_create_module_entry
snd_timer: Unknown symbol snd_info_free_entry
snd_timer: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_iprintf
snd_timer: Unknown symbol snd_ecards_limit
snd_timer: Unknown symbol snd_oss_info_register
snd_timer: Unknown symbol snd_unregister_device
snd_timer: Unknown symbol snd_device_new
snd_timer: Unknown symbol snd_register_device_for_dev
snd_pcm: Unknown symbol snd_verbose_printd
snd_pcm: Unknown symbol snd_info_register
snd_pcm: Unknown symbol snd_info_create_module_entry
snd_pcm: Unknown symbol snd_timer_notify
snd_pcm: Unknown symbol snd_timer_interrupt
snd_pcm: Unknown symbol snd_info_free_entry
snd_pcm: Unknown symbol snd_add_device_sysfs_file
snd_pcm: Unknown symbol snd_info_get_str
snd_pcm: Unknown symbol snd_verbose_printk
snd_pcm: Unknown symbol snd_ctl_register_ioctl
snd_pcm: Unknown symbol snd_card_file_add
snd_pcm: Unknown symbol snd_iprintf
snd_pcm: Unknown symbol snd_major
snd_pcm: Unknown symbol snd_unregister_device
snd_pcm: Unknown symbol snd_timer_new
snd_pcm: Unknown symbol snd_device_new
snd_pcm: Unknown symbol snd_ctl_unregister_ioctl
snd_pcm: Unknown symbol snd_lookup_minor_data
snd_pcm: Unknown symbol snd_info_create_card_entry
snd_pcm: Unknown symbol snd_power_wait
snd_pcm: Unknown symbol snd_device_free
snd_pcm: Unknown symbol snd_card_file_remove
snd_pcm: Unknown symbol snd_register_device_for_dev
snd_pcm: Unknown symbol snd_device_register
snd_pcm: Unknown symbol snd_info_get_line
snd_ac97_codec: Unknown symbol snd_info_register
snd_ac97_codec: Unknown symbol snd_ctl_add
snd_ac97_codec: Unknown symbol snd_info_free_entry
snd_ac97_codec: Unknown symbol snd_interval_refine
snd_ac97_codec: Unknown symbol snd_ctl_find_id
snd_ac97_codec: Unknown symbol snd_verbose_printk
snd_ac97_codec: Unknown symbol snd_ctl_new1
snd_ac97_codec: Unknown symbol snd_ctl_remove_id
snd_ac97_codec: Unknown symbol snd_component_add
snd_ac97_codec: Unknown symbol snd_pcm_hw_rule_add
snd_ac97_codec: Unknown symbol snd_iprintf
snd_ac97_codec: Unknown symbol snd_ctl_boolean_mono_info
snd_ac97_codec: Unknown symbol snd_device_new
snd_ac97_codec: Unknown symbol snd_info_create_card_entry
snd_ac97_codec: Unknown symbol snd_info_get_line
snd_via82xx: Unknown symbol snd_verbose_printd
snd_via82xx: Unknown symbol snd_ctl_add
snd_via82xx: Unknown symbol snd_ac97_resume
snd_via82xx: Unknown symbol snd_pcm_new
snd_via82xx: Unknown symbol snd_pcm_limit_hw_rates
snd_via82xx: Unknown symbol snd_card_register
snd_via82xx: Unknown symbol snd_card_free
snd_via82xx: Unknown symbol snd_pcm_lib_preallocate_pages_for_all
snd_via82xx: Unknown symbol snd_card_proc_new
snd_via82xx: Unknown symbol snd_ac97_set_rate
snd_via82xx: Unknown symbol snd_pcm_format_physical_width
snd_via82xx: Unknown symbol snd_ac97_update_bits
snd_via82xx: Unknown symbol snd_ac97_mixer
snd_via82xx: Unknown symbol snd_ac97_bus
snd_via82xx: Unknown symbol snd_ctl_find_id
snd_via82xx: Unknown symbol snd_verbose_printk
snd_via82xx: Unknown symbol snd_ctl_new1
snd_via82xx: Unknown symbol snd_ac97_update_power
snd_via82xx: Unknown symbol snd_card_new
snd_via82xx: Unknown symbol snd_ac97_suspend
snd_via82xx: Unknown symbol snd_iprintf
snd_via82xx: Unknown symbol snd_pcm_lib_malloc_pages
snd_via82xx: Unknown symbol snd_ctl_boolean_mono_info
snd_via82xx: Unknown symbol snd_pcm_lib_ioctl
snd_via82xx: Unknown symbol release_and_free_resource
snd_via82xx: Unknown symbol snd_pcm_lib_free_pages
snd_via82xx: Unknown symbol snd_pcm_set_ops
snd_via82xx: Unknown symbol snd_pcm_hw_constraint_list
snd_via82xx: Unknown symbol snd_device_new
snd_via82xx: Unknown symbol snd_pcm_sgbuf_ops_page
snd_via82xx: Unknown symbol snd_mpu401_uart_interrupt
snd_via82xx: Unknown symbol snd_ac97_get_short_name
snd_via82xx: Unknown symbol snd_pcm_suspend_all
snd_via82xx: Unknown symbol snd_card_disconnect
snd_via82xx: Unknown symbol snd_pcm_hw_constraint_integer
snd_via82xx: Unknown symbol snd_pci_quirk_lookup
snd_via82xx: Unknown symbol snd_mpu401_uart_new
snd_via82xx: Unknown symbol snd_pcm_period_elapsed
snd_via82xx: Unknown symbol snd_ac97_tune_hardwareich denke das hier sagt alles:
Code:
snd: Unknown parameter `ac97_quirk'hat das auch was damit zu tun, dass bei mir
/usr/src/linux/Documentation/sound/alsa/ALSA-Configuration.txt
nicht existiert, oder besser der pfad nur bis
/usr/src/
vorhanden ist?
muss ich noch irgendwas dazuinstallieren?
Sind deine Kernel-Quellen installiert?
Normalerweise ist das in der Kernel-Dokumentation enthalten, die auf /usr/src/linux von dem
aktuellem Kernel verlinkt ist. Könnte sein, dass die Verlinkung bei dir nicht erstellt ist.
Das wäre in deinem Fall :
/usr/src/linux-2.6.25.18-0.2-pae/Documentation/sound/alsa/ALSA-Configuration.txt
Das es die Option gibt, steht außer Frage, denn:
Module snd-via82xx
------------------
Module for AC'97 motherboards based on VIA 82C686A/686B, 8233,
8233A, 8233C, 8235, 8237 (south) bridge.
mpu_port - 0x300,0x310,0x320,0x330, otherwise obtain BIOS setup
[VIA686A/686B only]
joystick - Enable joystick (default off) [VIA686A/686B only]
ac97_clock - AC'97 codec clock base (default 48000Hz)
dxs_support - support DXS channels,
0 = auto (default), 1 = enable, 2 = disable,
3 = 48k only, 4 = no VRA, 5 = enable any sample
rate and different sample rates on different
channels
[VIA8233/C, 8235, 8237 only]
ac97_quirk - AC'97 workaround for strange hardware
See "AC97 Quirk Option" section below.
This module supports one chip and autoprobe.
Note: on some SMP motherboards like MSI 694D the interrupts might
not be generated properly. In such a case, please try to
set the SMP (or MPS) version on BIOS to 1.1 instead of
default value 1.4. Then the interrupt number will be
assigned under 15. You might also upgrade your BIOS.
Note: VIA8233/5/7 (not VIA8233A) can support DXS (direct sound)
channels as the first PCM. On these channels, up to 4
streams can be played at the same time, and the controller
can perform sample rate conversion with separate rates for
each channel.
As default (dxs_support = 0), 48k fixed rate is chosen
except for the known devices since the output is often
noisy except for 48k on some mother boards due to the
bug of BIOS.
Please try once dxs_support=5 and if it works on other
sample rates (e.g. 44.1kHz of mp3 playback), please let us
know the PCI subsystem vendor/device id's (output of
"lspci -nv").
If dxs_support=5 does not work, try dxs_support=4; if it
doesn't work too, try dxs_support=1. (dxs_support=1 is
usually for old motherboards. The correct implemented
board should work with 4 or 5.) If it still doesn't
work and the default setting is ok, dxs_support=3 is the
right choice. If the default setting doesn't work at all,
try dxs_support=2 to disable the DXS channels.
In any cases, please let us know the result and the
subsystem vendor/device ids. See "Links and Addresses"
below.
Note: for the MPU401 on VIA823x, use snd-mpu401 driver
additionally. The mpu_port option is for VIA686 chips only.
The power-management is supported.
ich denke eher, die Syntax wird so nicht angenommen.
Die Frage ist, wie genau es rein muss.
MfG
misiu
Normalerweise ist das in der Kernel-Dokumentation enthalten, die auf /usr/src/linux von dem
aktuellem Kernel verlinkt ist. Könnte sein, dass die Verlinkung bei dir nicht erstellt ist.
Das wäre in deinem Fall :
/usr/src/linux-2.6.25.18-0.2-pae/Documentation/sound/alsa/ALSA-Configuration.txt
Das es die Option gibt, steht außer Frage, denn:
Module snd-via82xx
------------------
Module for AC'97 motherboards based on VIA 82C686A/686B, 8233,
8233A, 8233C, 8235, 8237 (south) bridge.
mpu_port - 0x300,0x310,0x320,0x330, otherwise obtain BIOS setup
[VIA686A/686B only]
joystick - Enable joystick (default off) [VIA686A/686B only]
ac97_clock - AC'97 codec clock base (default 48000Hz)
dxs_support - support DXS channels,
0 = auto (default), 1 = enable, 2 = disable,
3 = 48k only, 4 = no VRA, 5 = enable any sample
rate and different sample rates on different
channels
[VIA8233/C, 8235, 8237 only]
ac97_quirk - AC'97 workaround for strange hardware
See "AC97 Quirk Option" section below.
This module supports one chip and autoprobe.
Note: on some SMP motherboards like MSI 694D the interrupts might
not be generated properly. In such a case, please try to
set the SMP (or MPS) version on BIOS to 1.1 instead of
default value 1.4. Then the interrupt number will be
assigned under 15. You might also upgrade your BIOS.
Note: VIA8233/5/7 (not VIA8233A) can support DXS (direct sound)
channels as the first PCM. On these channels, up to 4
streams can be played at the same time, and the controller
can perform sample rate conversion with separate rates for
each channel.
As default (dxs_support = 0), 48k fixed rate is chosen
except for the known devices since the output is often
noisy except for 48k on some mother boards due to the
bug of BIOS.
Please try once dxs_support=5 and if it works on other
sample rates (e.g. 44.1kHz of mp3 playback), please let us
know the PCI subsystem vendor/device id's (output of
"lspci -nv").
If dxs_support=5 does not work, try dxs_support=4; if it
doesn't work too, try dxs_support=1. (dxs_support=1 is
usually for old motherboards. The correct implemented
board should work with 4 or 5.) If it still doesn't
work and the default setting is ok, dxs_support=3 is the
right choice. If the default setting doesn't work at all,
try dxs_support=2 to disable the DXS channels.
In any cases, please let us know the result and the
subsystem vendor/device ids. See "Links and Addresses"
below.
Note: for the MPU401 on VIA823x, use snd-mpu401 driver
additionally. The mpu_port option is for VIA686 chips only.
The power-management is supported.
ich denke eher, die Syntax wird so nicht angenommen.
Die Frage ist, wie genau es rein muss.
MfG
misiu
OP
bei mir gibts den ordner /usr/src/linux-2.6.25.18-0.2-obj/
dieser enthält aber nur den ordner ./i386 und eine verknüpfung auf diesen mit dem namen i586
dann kommt der ordner ./pae/ und dann ./makedumpfile.config und ./Module.symvers
wie die syntax lauten muss weiß ich nicht.
kann ich was kaputt machen wenn ich einfach ein bisschen mit der syntax rumspiele?
dieser enthält aber nur den ordner ./i386 und eine verknüpfung auf diesen mit dem namen i586
dann kommt der ordner ./pae/ und dann ./makedumpfile.config und ./Module.symvers
wie die syntax lauten muss weiß ich nicht.
kann ich was kaputt machen wenn ich einfach ein bisschen mit der syntax rumspiele?
:???:x_puma_x schrieb:
Eigentlich müsste es einen Standard-Verzeichnis mit dem Kernel geben, ist vielleicht bei dir versteckt?
(/usr/src/linux-2.6.25.18-0.2)
Sind deine Kernel-Quellen installiert oder nicht?
x_puma_x schrieb:
Kaum, höchstens wird dein Sound nicht gehen.
Must du auch nicht neu starten, einfach:
Code:
rcalsasound stop
rcalsasound startLeg dir aber eine Kopie an, falls du zu viel ändern solltest.
MfG
misiu
OP
nö. ist nicht da. auch nicht versteckt.misiu schrieb:
ich versteh nicht was du meinstmisiu schrieb:
ps: Wenn mit sicherung der Datei nichts kaputt gehen kann, dann experimentier ich mal ein bisschen rum.
OP
ok ich hab jetz beide pakete installiert .
die dateien sind jetzt vorhanden. aber das problem mit der /etc/modprobe.d/sound
besteht immer noch genau so. ich hab schon alle mir logisch erscheinenden syntaxkombinationen probiert. nichts hat geklappt.
PS: ich hab wie gesagt BEIDE pakete installiert. dadurch hab ich in GRUB jetz zweimal suse zum starten (beidesmal die gleiche kernelversion) und auch zweimal FailSafe.
kann ich das paket kernel-deault einfach wieder entfernen? es war vorher ja auch nicht drauf, und ich denke nicht dass mir jast den kernel löschen kann.
die dateien sind jetzt vorhanden. aber das problem mit der /etc/modprobe.d/sound
besteht immer noch genau so. ich hab schon alle mir logisch erscheinenden syntaxkombinationen probiert. nichts hat geklappt.
PS: ich hab wie gesagt BEIDE pakete installiert. dadurch hab ich in GRUB jetz zweimal suse zum starten (beidesmal die gleiche kernelversion) und auch zweimal FailSafe.
kann ich das paket kernel-deault einfach wieder entfernen? es war vorher ja auch nicht drauf, und ich denke nicht dass mir jast den kernel löschen kann
.
?
kernel-source - The Linux Kernel Sources
kernel-default - The Standard Kernel for both Uniprocessor and Multiprocessor Systems
sind keine zwei Kernel.
ist die VORLAGE, aus der der benutzte Kernel gebaut wird. Im Normalfall ist es
dann "kernel-default_NummerdesKernels". Es können aber mehrere Kernel daraus gebaut werden für
spezielle Zwecke (z.B. Serverbetrieb). Auf einen Heimrechner sollte ein Standard-Kernel installiert werden.
Wahrscheinlich hast du jetzt einen zweiten Kernel dazuinstalliert, deswegen die zwei Wahl-Möglichkeiten
im GRUB. Den zuletzt installierten solltest du wieder abwählen.
Du solltest auch keine zusätzlichen Kernel nachinstallieren, sondern nur die Kernel-Quellen (sprich diese
VORLAGE) die zum laufendem Kernel dazupassen.
MfG
misiu
kernel-source - The Linux Kernel Sources
kernel-default - The Standard Kernel for both Uniprocessor and Multiprocessor Systems
sind keine zwei Kernel.
Code:
kernel-sourcedann "kernel-default_NummerdesKernels". Es können aber mehrere Kernel daraus gebaut werden für
spezielle Zwecke (z.B. Serverbetrieb). Auf einen Heimrechner sollte ein Standard-Kernel installiert werden.
Wahrscheinlich hast du jetzt einen zweiten Kernel dazuinstalliert, deswegen die zwei Wahl-Möglichkeiten
im GRUB. Den zuletzt installierten solltest du wieder abwählen.
Du solltest auch keine zusätzlichen Kernel nachinstallieren, sondern nur die Kernel-Quellen (sprich diese
VORLAGE) die zum laufendem Kernel dazupassen.
MfG
misiu
OP
[offtopic]
in GRUB hab ich einmal
opensuse <...> (pae) #ist als standard ausgewählt
und einmal
opensuse <...> (default)
beide haben die selbe kernelversion.
da kerne-pae schon vorher drauf war und ich jetz nur kernel-default dazuinstalliert hab, sollte ich kernel-default ohne probleme wieder löschen können oder?
[/offtopic]
Code:
***@***:~> rpm -qa| grep kernel
kernel-pae-2.6.25.18-0.2
kernel-default-2.6.25.18-0.2
kernel-source-2.6.25.18-0.2
linux-kernel-headers-2.6.25-8.1in GRUB hab ich einmal
opensuse <...> (pae) #ist als standard ausgewählt
und einmal
opensuse <...> (default)
beide haben die selbe kernelversion.
da kerne-pae schon vorher drauf war und ich jetz nur kernel-default dazuinstalliert hab, sollte ich kernel-default ohne probleme wieder löschen können oder?
[/offtopic]