Hallo,
ich habe heute SUSE 11.0 installiert.
Jetzt habe ich das Problem, dass ich Windows mit Grub nicht starten kann.
Ich habe dies von hier
http://www.linux-club.de/viewtopic.php?f=4&t=98393
schon versucht, doch ohne Erfolg.
Wenn ich die Laufwerke mappe, und Win anwähle bleibt der Rechner mit der Anzeige GRUB stehen.
Windows ist auf sda1 installiert
SUSE auf sdb2 und sdb3
Die Ausgaben zeigen:
linux-wofs:/etc # cat /boot/grub/menu.lst
# Modified by YaST2. Last modification on So Nov 9 14:00:17 CET 2008
default 0
timeout 8
gfxmenu (hd1,1)/boot/message
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 11.0 - 2.6.25.18-0.2
root (hd1,1)
kernel /boot/vmlinuz-2.6.25.18-0.2-pae root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHY2160_K42HT7B25AYY-part2 resume=/dev/sdb1 splash=silent showopts vga=0x317
initrd /boot/initrd-2.6.25.18-0.2-pae
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 11.0 - 2.6.25.18-0.2
root (hd1,1)
kernel /boot/vmlinuz-2.6.25.18-0.2-pae root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHY2160_K42HT7B25AYY-part2 showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off x11failsafe vga=0x317
initrd /boot/initrd-2.6.25.18-0.2-pae
###Don't change this comment - YaST2 identifier: Original name: windows###
title Windows
rootnoverify (hd1,1)
chainloader (hd0,0)+1
linux-wofs:/etc # fdisk -l
Platte /dev/sda: 100.0 GByte, 100030242816 Byte
255 Köpfe, 63 Sektoren/Spuren, 12161 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0xa1b0a1b0
Gerät boot. Anfang Ende Blöcke Id System
/dev/sda1 * 1 12160 97675168+ 7 HPFS/NTFS
Platte /dev/sdb: 160.0 GByte, 160041885696 Byte
255 Köpfe, 63 Sektoren/Spuren, 19457 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x0006465c
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdb1 1 262 2104483+ 82 Linux Swap / Solaris
/dev/sdb2 * 263 2873 20972857+ 83 Linux
/dev/sdb3 2874 9401 52436160 83 Linux
/dev/sdb4 9402 19457 80774820 c W95 FAT32 (LBA)
linux-wofs:/etc # cat /boot/grub/device.map
(hd0) /dev/sda
(hd1) /dev/sdb
Hat jemand einen Tipp wo der Fehler liegt.
Mit SUSE 10.3 hat es funktioniert.
Danke für Hinweise
bike
ich habe heute SUSE 11.0 installiert.
Jetzt habe ich das Problem, dass ich Windows mit Grub nicht starten kann.
Ich habe dies von hier
http://www.linux-club.de/viewtopic.php?f=4&t=98393
schon versucht, doch ohne Erfolg.
Wenn ich die Laufwerke mappe, und Win anwähle bleibt der Rechner mit der Anzeige GRUB stehen.
Windows ist auf sda1 installiert
SUSE auf sdb2 und sdb3
Die Ausgaben zeigen:
linux-wofs:/etc # cat /boot/grub/menu.lst
# Modified by YaST2. Last modification on So Nov 9 14:00:17 CET 2008
default 0
timeout 8
gfxmenu (hd1,1)/boot/message
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 11.0 - 2.6.25.18-0.2
root (hd1,1)
kernel /boot/vmlinuz-2.6.25.18-0.2-pae root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHY2160_K42HT7B25AYY-part2 resume=/dev/sdb1 splash=silent showopts vga=0x317
initrd /boot/initrd-2.6.25.18-0.2-pae
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 11.0 - 2.6.25.18-0.2
root (hd1,1)
kernel /boot/vmlinuz-2.6.25.18-0.2-pae root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHY2160_K42HT7B25AYY-part2 showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off x11failsafe vga=0x317
initrd /boot/initrd-2.6.25.18-0.2-pae
###Don't change this comment - YaST2 identifier: Original name: windows###
title Windows
rootnoverify (hd1,1)
chainloader (hd0,0)+1
linux-wofs:/etc # fdisk -l
Platte /dev/sda: 100.0 GByte, 100030242816 Byte
255 Köpfe, 63 Sektoren/Spuren, 12161 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0xa1b0a1b0
Gerät boot. Anfang Ende Blöcke Id System
/dev/sda1 * 1 12160 97675168+ 7 HPFS/NTFS
Platte /dev/sdb: 160.0 GByte, 160041885696 Byte
255 Köpfe, 63 Sektoren/Spuren, 19457 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x0006465c
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdb1 1 262 2104483+ 82 Linux Swap / Solaris
/dev/sdb2 * 263 2873 20972857+ 83 Linux
/dev/sdb3 2874 9401 52436160 83 Linux
/dev/sdb4 9402 19457 80774820 c W95 FAT32 (LBA)
linux-wofs:/etc # cat /boot/grub/device.map
(hd0) /dev/sda
(hd1) /dev/sdb
Hat jemand einen Tipp wo der Fehler liegt.
Mit SUSE 10.3 hat es funktioniert.
Danke für Hinweise
bike