Hauppauge Win TV

[Wolfgang]

ok gibt es noch eine möglichkeit heraus zu bekommen was ich für einen chip habe?

Hast Du schon mal als root den Befehl lspci ausprobiert?

Bei mir gibts unter anderem folgendes:

0000:00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
0000:00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)

Meine ist halt ne uralte WinTV PCI/FM mit BT 878 chip


Gruss Wolfgang

 

[thommyus]

Hi *

Also das Ding zum laufen zu kriegen ist nicht so schwer. Ich habe ne Hauppauge WinTV Primio FM mit einem cx23881 Chipsatz. SuSE 9.1 Kernel 2.6.5.-7.147-default

modprobe tuner
modprobe cx88xx
modprobe cx8800 tuner=28

Fernsehen geht mit tvtime.

Allerdings habe ich jetzt noch das Problem daß das Fernseh-Bild in schwarz/weiß und der Ton relativ instabil ist.

Hat jemand die selben Probleme ? Oder vielleicht noch besser eine Lösung ? Oder eine zündende Idee ?

Gruß
Thomas

 

[guarana5]

ich hab mittlerweile auf ubuntu gewechselt, welches meine tv-karte (WinTV GO) gleich erkannt hat (wenn auch, glaub ich, nicht richtig) und hab jetzt die selben bild-/ton-probleme wie du... will einfach nicht so richtig :?
wär also auch an lösungsvorschlägen interessiert!

 

[wolfi_z]

Diese entsprechenden Kernelmodule sind nachwievor recht instabil AFAIK.
An dem Punkt tut sich leider nicht so schnell etwas

 

[rue.fr]

ok gibt es noch eine möglichkeit heraus zu bekommen was ich für einen chip habe?

Hast Du schon mal als root den Befehl lspci ausprobiert?

Bei mir gibts unter anderem folgendes:

0000:00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
0000:00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)

Meine ist halt ne uralte WinTV PCI/FM mit BT 878 chip


Gruss Wolfgang

Hallo Wolfgang

das mit dem lspci habe ich ausprobiert
bei der karte steht

0000:01:0a.0 Multimedia controller: Philips Semiconductors saa7146 (rev 01)


jetzt gehe ich mal davon aus das der chip der saa7146 ist, kannst du mir vielleicht sagen welcher treiber mit diesem chip funktioniert?

Schon mal danke im voraus

 

[bike]

Schau dir mal diese Seite an:
http://www.mihu.de/linux/
Da ist ein Treiber für den Chip auf deiner Karte.

Und hier steht noch mehr:
http://www.linuxtv.org/wiki/index.php/PCI_devices_DVB-S

Nach dieser Seite
http://www.linuxtv.org/wiki/index.php/LinuxTV_Drivers

Soll der Treiber jedoch ab 2.6 kernel drin sein.


bike

 

[wolfi_z]

(....) Soll der Treiber jedoch ab 2.6 kernel drin sein. (....)

Das ist bekannt, die Frage ist jetzt ... hat sich hier mit 9.3 etwas getan :?: Ist der cx88 hier jetzt konfigurierbar :?:
Hat das schonmal jemand ausprobiert :?:

 

[BdMdesigN]

(....) Soll der Treiber jedoch ab 2.6 kernel drin sein. (....)

Das ist bekannt, die Frage ist jetzt ... hat sich hier mit 9.3 etwas getan :?: Ist der cx88 hier jetzt konfigurierbar :?:
Hat das schonmal jemand ausprobiert :?:

Ja in 9.3 gehts besser mit dem cx88 Treibern

Für die Winfast TV2000 XP MCE ( Hauppauge HVR 1300, no Ir, Hybrid )

bin Ich grad am Treiber bei und schreibe grade den Hardwware Support.

Folgender Stand:

Karte : Winfast TV 2000 XP

subvendor + subid: 0070:9600


Die Karte wird jetzt korrekt erkannt als Winfast TV2000 XP und nicht mehr als unknown/generic

DVB :

Tuner wird erkannt : Philips FMD 1216 ME MK3 ( 96559 )

TVeeproom geht noch nicht

Blackbird MPEG Encoder-Chip:

Wird voll erkannt und Treiber werden geladen

Der dritte Controler ist der cx88-Alsa ( Audio-Controler )

Der geht auch und wird voll erkannt.

Den FM Tuner konnte ich noch nicht aktivieren.


MfG


BdMdesigN

 

[BdMdesigN]

Folgender Stand:

Kernel Serie : 2.6.1x ( der LinuxTv Treiber wird nun unnötig )

Karte : Winfast TV 2000 XP ( HVR1300 IR , NO-IR ( M-C-E ) )

subvendor + subid: 0070:9600

subvendor + subid: 0070:9601

Die Karte wird jetzt korrekt erkannt als Winfast TV2000 XP und nicht mehr als unknown/generic

Analog:

Tuner wird erkannt : Philips FMD 1216 ME MK3 ( 96559 ; 96019 )
und geladen

Die Analogen Devices ( dev/videoX , dev/vbiX , dev/radioX )
werden erkannt und geladen.

Die Analogen Schnittstellen Composite und S-Video funktioniren ( bekomme Bilder in Farbe aber ohne Ton )

IR:

Die Fernbedienung wird erkannt und geladen ( Muß das Testprogramm noch bearbeiten und an die Fernbedienung anpassen )


DVB:

Das DVB-Frontend cx22702 wird nun erkannt und geladen ( allerdings erst nach einen DVB-restart )

Blackbird MPEG Encoder-Chip:

Wird voll erkannt und Treiber werden geladen


Audio:

Der dritte Controler ist der cx88-Alsa ( Audio-Controler )
wird erkannt und geladen

Der dazugehöhrige Soundchip ( wm8775 ) wird nun erkannt und geladen


Radio:

Den FM Tuner konnte ich noch nicht aktivieren.

**** Nachtrag ****

Nach einer langen harten Nacht geht nun auch das Radio ( leider noch ohne Ton )

###############################################

Troz das der Soundchip geladen wird bleibt die Karte Stumm.

Beim DVB-Frontend ist folgendes problem:

es werden keine Sender gefunden ( ich denke mal das es am Soundchip liegen müßte )

Testprogramm:
Kaffeine

Wenn ich im Kaffeine DVB-Sender Sannen will passiert folgendes:

Signal = 0%

SNR = 83-100% ( Schwankend)


Sollte jemand das Problem mit dem Soundchip gelöst haben bitte ich um Infos



MfG


BdMdesigN

 

[BdMdesigN]

Folgender Stand :

dmesg:

linux:/home/pitbull # rcdvb start
Starting DVB [ cx88-dvb cx88-blackbird cx88-alsa cx8800 cx8802 cx22702done5840 tda9887 wm8775 ]
linux:/home/pitbull # dmesg
received packet: ffc01570 ffc00000 00000000 04000000
ieee1394: NodeMgr: raw=0xe064a232 irmc=1 cmc=1 isc=1 bmc=0 pmc=0 cyc_clk_acc=100 max_rec=2048 max_rom=1024 gen=3 lspd=2
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0031059a16]
usb 3-1: new low speed USB device using ohci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-3: new low speed USB device using ohci_hcd and address 3
usb 3-3: configuration #1 chosen from 1 choice
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input0
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-1
input: Mega World USB Game Controllers as /class/input/input1
input: USB HID v1.10 Joystick [Mega World USB Game Controllers] on usb-0000:00:02.1-3
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
I2O subsystem v1.325
i2o: max drivers = 8
i2c /dev entries driver
i2c-core: driver [dev_driver] registered
MC: drivers/edac/edac_mc.c version edac_mc Ver: 2.0.0 Jun 26 2006
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
ip_conntrack version 2.4 (8191 buckets, 65528 max) - 232 bytes per conntrack
TCP bic registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
ACPI: (supports S0 S1 S3 S4 S5)
ReiserFS: hdc1: found reiserfs format "3.6" with standard journal
input: AT Translated Set 2 keyboard as /class/input/input2
ReiserFS: hdc1: using ordered data mode
ReiserFS: hdc1: journal params: device hdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc1: checking transaction log (hdc1)
ReiserFS: hdc1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 196k freed
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
ReiserFS: hdc3: found reiserfs format "3.6" with standard journal
ReiserFS: hdc3: using ordered data mode
ReiserFS: hdc3: journal params: device hdc3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc3: checking transaction log (hdc3)
ReiserFS: hdc3: Using r5 hash to sort names
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
NTFS driver 2.1.26 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs warning (device hda1): load_system_files(): Unsupported volume flags 0x4000 encountered.
NTFS-fs error (device hda1): load_system_files(): Volume has unsupported flags set. Mounting read-only. Run chkdsk and mount in Windows.
ReiserFS: hdc4: found reiserfs format "3.6" with standard journal
ReiserFS: hdc4: using ordered data mode
ReiserFS: hdc4: journal params: device hdc4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc4: checking transaction log (hdc4)
ReiserFS: hdc4: Using r5 hash to sort names
Capability LSM initialized
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK1] -> GSI 12 (level, low) -> IRQ 12
ALSA sound/pci/emu10k1/emu10k1_main.c:1113: vendor=0x1102, device=0x4, subsystem_vendor_id=0x531102, subsystem_id=0x53
ALSA sound/pci/emu10k1/emu10k1_main.c:1138: Sound card name=Audigy 1 [SB0090]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Adding 5245212k swap on /dev/hdc2. Priority:42 extents:1 across:5245212k
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
sit0: Disabled Privacy Extensions
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
Linux agpgart interface v0.101 (c) Dave Jones
nvidia: module license 'NVIDIA' taints kernel.
acpi_bus-0201 [01] bus_set_power : Device is not power manageable
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8756 Wed Mar 29 14:26:26 PST 2006
i2c_adapter i2c-0: adapter [NVIDIA I2C Device] registered
i2c-dev: adapter [NVIDIA I2C Device] registered as minor 0
i2c_adapter i2c-1: adapter [NVIDIA I2C Device] registered
i2c-dev: adapter [NVIDIA I2C Device] registered as minor 1
i2c_adapter i2c-2: adapter [NVIDIA I2C Device] registered
i2c-dev: adapter [NVIDIA I2C Device] registered as minor 2
Linux video capture interface: v1.00
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (41 C)
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Non-volatile memory driver v1.2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
i2c-core: driver [ir-kbd-i2c] registered
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
ACPI: PCI interrupt for device 0000:01:07.0 disabled
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK1] -> GSI 12 (level, low) -> IRQ 12
ALSA sound/pci/emu10k1/emu10k1_main.c:1113: vendor=0x1102, device=0x4, subsystem_vendor_id=0x531102, subsystem_id=0x53
ALSA sound/pci/emu10k1/emu10k1_main.c:1138: Sound card name=Audigy 1 [SB0090]
ACPI: PCI interrupt for device 0000:01:07.0 disabled
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK1] -> GSI 12 (level, low) -> IRQ 12
ALSA sound/pci/emu10k1/emu10k1_main.c:1113: vendor=0x1102, device=0x4, subsystem_vendor_id=0x531102, subsystem_id=0x53
ALSA sound/pci/emu10k1/emu10k1_main.c:1138: Sound card name=Audigy 1 [SB0090]
ACPI: PCI interrupt for device 0000:01:07.0 disabled
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK1] -> GSI 12 (level, low) -> IRQ 12
ALSA sound/pci/emu10k1/emu10k1_main.c:1113: vendor=0x1102, device=0x4, subsystem_vendor_id=0x531102, subsystem_id=0x53
ALSA sound/pci/emu10k1/emu10k1_main.c:1138: Sound card name=Audigy 1 [SB0090]
gameport: EMU10K1 is pci0000:01:07.1/gameport0, io 0xd400, speed 890kHz
usbcore: registered new driver iforce
i2c-core: driver [tveeprom] registered
cx2388x dvb driver version 0.0.5 loaded
CORE cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder & M-C-E ( Winfast TV2000 XP ) [card=45,autodetected]
TV tuner 63 at 0x1fe, Radio tuner 63 at 0x1fe
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: cx88[0] passed test.
i2c_adapter i2c-3: adapter [cx88[0]] registered
i2c-dev: adapter [cx88[0]] registered as minor 3
i2c_adapter i2c-3: master_xfer[0] W, addr=0x50, len=1
i2c_adapter i2c-3: master_xfer[0] R, addr=0x50, len=256
tveeprom 3-0050: Hauppauge model 96019, rev C6A0, serial# 547165
tveeprom 3-0050: MAC address is 00-0D-FE-08-59-5D
tveeprom 3-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
tveeprom 3-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
tveeprom 3-0050: audio processor is CX882 (idx 33)
tveeprom 3-0050: decoder processor is CX882 (idx 25)
tveeprom 3-0050: has radio, has IR remote
cx88[0]: hauppauge eeprom: model=96019
input: cx88 IR (Hauppauge WinTV-HVR130 as /class/input/input3
ACPI: PCI Interrupt 0000:01:09.2[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 10, latency: 32, mmio: 0xd5000000

cx88[0]/2: cx2388x based dvb card
i2c_adapter i2c-3: master_xfer[0] W, addr=0x63, len=1
i2c_adapter i2c-3: master_xfer[1] R, addr=0x63, len=1
cx22702_readreg: readreg error (ret == -121)
cx88[0]: frontend initialization failed
cx88[0]/2: cx8802_stop_dma
ACPI: PCI interrupt for device 0000:01:09.2 disabled
i2c-dev: adapter [cx88[0]] unregistered
i2c_adapter i2c-3: adapter [cx88[0]] unregistered
cx88-dvb: probe of 0000:01:09.2 failed with error -1

cx2388x v4l2 driver version 0.0.5 loaded
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
CORE cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder & M-C-E ( Winfast TV2000 XP ) [card=45,autodetected]
TV tuner 63 at 0x1fe, Radio tuner 63 at 0x1fe
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: cx88[0] passed test.
i2c_adapter i2c-3: adapter [cx88[0]] registered
i2c-dev: adapter [cx88[0]] registered as minor 3
i2c_adapter i2c-3: master_xfer[0] W, addr=0x50, len=1
i2c_adapter i2c-3: master_xfer[0] R, addr=0x50, len=256
tveeprom 3-0050: Hauppauge model 96019, rev C6A0, serial# 547165
tveeprom 3-0050: MAC address is 00-0D-FE-08-59-5D
tveeprom 3-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
tveeprom 3-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
tveeprom 3-0050: audio processor is CX882 (idx 33)
tveeprom 3-0050: decoder processor is CX882 (idx 25)
tveeprom 3-0050: has radio, has IR remote
cx88[0]: hauppauge eeprom: model=96019
input: cx88 IR (Hauppauge WinTV-HVR130 as /class/input/input4
cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 10, latency: 32, mmio: 0xd3000000
i2c-core: driver [tuner] registered
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x42
i2c_adapter i2c-3: master_xfer[0] W, addr=0x42, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x43
i2c_adapter i2c-3: master_xfer[0] W, addr=0x43, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x4a
i2c_adapter i2c-3: master_xfer[0] W, addr=0x4a, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x4b
i2c_adapter i2c-3: master_xfer[0] W, addr=0x4b, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x60
i2c_adapter i2c-3: master_xfer[0] W, addr=0x60, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x61
i2c_adapter i2c-3: master_xfer[0] W, addr=0x61, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x62
i2c_adapter i2c-3: master_xfer[0] W, addr=0x62, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x63
i2c_adapter i2c-3: master_xfer[0] W, addr=0x63, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x64
i2c_adapter i2c-3: master_xfer[0] W, addr=0x64, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x65
i2c_adapter i2c-3: master_xfer[0] W, addr=0x65, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x66
i2c_adapter i2c-3: master_xfer[0] W, addr=0x66, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x67
i2c_adapter i2c-3: master_xfer[0] W, addr=0x67, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x68
i2c_adapter i2c-3: master_xfer[0] W, addr=0x68, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x69
i2c_adapter i2c-3: master_xfer[0] W, addr=0x69, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x6a
i2c_adapter i2c-3: master_xfer[0] W, addr=0x6a, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x6b
i2c_adapter i2c-3: master_xfer[0] W, addr=0x6b, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x6c
i2c_adapter i2c-3: master_xfer[0] W, addr=0x6c, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x6d
i2c_adapter i2c-3: master_xfer[0] W, addr=0x6d, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x6e
i2c_adapter i2c-3: master_xfer[0] W, addr=0x6e, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x6f
i2c_adapter i2c-3: master_xfer[0] W, addr=0x6f, len=0
i2c-core: driver [tda9887] registered
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x42
i2c_adapter i2c-3: master_xfer[0] W, addr=0x42, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x43
i2c_adapter i2c-3: master_xfer[0] W, addr=0x43, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x4b
i2c_adapter i2c-3: master_xfer[0] W, addr=0x4b, len=0
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
set_control id=0x980900 reg=0x310110 val=0x00 (mask 0xff)
set_control id=0x980901 reg=0x310110 val=0x3f00 (mask 0xff00)
set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff)
set_control id=0x980902 reg=0x310114 val=0x5a7f (mask 0xffff)
set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed]
set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed]
set_control id=0x980906 reg=0x320598 val=0x40 (mask 0x7f) [shadowed]

cx2388x blackbird driver version 0.0.5 loaded
ACPI: PCI Interrupt 0000:01:09.2[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 10, latency: 32, mmio: 0xd5000000
cx88[0]/2: cx23416 based mpeg encoder (blackbird reference design)
cx88[0]/2: registered device video1 [mpeg]
cx2388x alsa driver version 0.0.5 loaded
ACPI: PCI Interrupt 0000:01:09.1[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10

cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
i2c-core: driver [cx25840] registered
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x44
i2c_adapter i2c-3: master_xfer[0] W, addr=0x44, len=0
i2c-core: driver [wm8775] registered
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x1b
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=0
wm8775 3-001b: chip found @ 0x36 (cx88[0])
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: client [wm8775] registered with bus id 3-001b

linux:/home/pitbull # rcdvb restart
Shutting down DVB [ cx88-dvb cx88-blackbird cx88-alsa cx8800 cx8802 cxdone2 cx25840 tda9887 wm8775 ]


Das wird nun geladen wenn ich die DVB devices das erstemal starte.

Nach einen restart sieht das ganze dann so aus :

cx2388x dvb driver version 0.0.5 loaded
CORE cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder & M-C-E ( Winfast TV2000 XP ) [card=45,autodetected]
TV tuner 63 at 0x1fe, Radio tuner 63 at 0x1fe
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: cx88[0] passed test.
i2c_adapter i2c-3: adapter [cx88[0]] registered
i2c-dev: adapter [cx88[0]] registered as minor 3
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x42
i2c_adapter i2c-3: master_xfer[0] W, addr=0x42, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x43
i2c_adapter i2c-3: master_xfer[0] W, addr=0x43, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x4a
i2c_adapter i2c-3: master_xfer[0] W, addr=0x4a, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x4b
i2c_adapter i2c-3: master_xfer[0] W, addr=0x4b, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x60
i2c_adapter i2c-3: master_xfer[0] W, addr=0x60, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x61
i2c_adapter i2c-3: master_xfer[0] W, addr=0x61, len=0
tuner 3-0061: chip found @ 0xc2 (cx88[0])
i2c_adapter i2c-3: client [(tuner unset)] registered with bus id 3-0061
i2c_adapter i2c-3: master_xfer[0] W, addr=0x61, len=4
i2c_adapter i2c-3: master_xfer[0] W, addr=0x61, len=4
tuner 3-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x62
i2c_adapter i2c-3: master_xfer[0] W, addr=0x62, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x63
i2c_adapter i2c-3: master_xfer[0] W, addr=0x63, len=0
tuner 3-0063: chip found @ 0xc6 (cx88[0])
i2c_adapter i2c-3: client [(tuner unset)] registered with bus id 3-0063
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x64
i2c_adapter i2c-3: master_xfer[0] W, addr=0x64, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x65
i2c_adapter i2c-3: master_xfer[0] W, addr=0x65, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x66
i2c_adapter i2c-3: master_xfer[0] W, addr=0x66, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x67
i2c_adapter i2c-3: master_xfer[0] W, addr=0x67, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x68
i2c_adapter i2c-3: master_xfer[0] W, addr=0x68, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x69
i2c_adapter i2c-3: master_xfer[0] W, addr=0x69, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x6a
i2c_adapter i2c-3: master_xfer[0] W, addr=0x6a, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x6b
i2c_adapter i2c-3: master_xfer[0] W, addr=0x6b, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x6c
i2c_adapter i2c-3: master_xfer[0] W, addr=0x6c, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x6d
i2c_adapter i2c-3: master_xfer[0] W, addr=0x6d, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x6e
i2c_adapter i2c-3: master_xfer[0] W, addr=0x6e, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x6f
i2c_adapter i2c-3: master_xfer[0] W, addr=0x6f, len=0
i2c_adapter i2c-3: master_xfer[0] W, addr=0x50, len=1
i2c_adapter i2c-3: master_xfer[0] R, addr=0x50, len=256
tveeprom 3-0050: Hauppauge model 96019, rev C6A0, serial# 547165
tveeprom 3-0050: MAC address is 00-0D-FE-08-59-5D
tveeprom 3-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
tveeprom 3-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
tveeprom 3-0050: audio processor is CX882 (idx 33)
tveeprom 3-0050: decoder processor is CX882 (idx 25)
tveeprom 3-0050: has radio, has IR remote
cx88[0]: hauppauge eeprom: model=96019
input: cx88 IR (Hauppauge WinTV-HVR130 as /class/input/input5
ACPI: PCI Interrupt 0000:01:09.2[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 10, latency: 32, mmio: 0xd5000000
cx88[0]/2: cx2388x based dvb card
i2c_adapter i2c-3: master_xfer[0] W, addr=0x63, len=1
i2c_adapter i2c-3: master_xfer[1] R, addr=0x63, len=1
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (Conexant CX22702 DVB-T)...

cx2388x v4l2 driver version 0.0.5 loaded
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 10, latency: 32, mmio: 0xd3000000
i2c-core: driver [tda9887] registered
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x42
i2c_adapter i2c-3: master_xfer[0] W, addr=0x42, len=0
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x43
i2c_adapter i2c-3: master_xfer[0] W, addr=0x43, len=0
tda9887 3-0043: chip found @ 0x86 (cx88[0])
i2c_adapter i2c-3: master_xfer[0] W, addr=0x43, len=4
i2c_adapter i2c-3: client [tda9887] registered with bus id 3-0043
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x4b
i2c_adapter i2c-3: master_xfer[0] W, addr=0x4b, len=0
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
i2c_adapter i2c-3: master_xfer[0] W, addr=0x63, len=1
i2c_adapter i2c-3: master_xfer[1] R, addr=0x63, len=1
i2c_adapter i2c-3: master_xfer[0] W, addr=0x63, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x61, len=4
i2c_adapter i2c-3: master_xfer[0] W, addr=0x43, len=4
i2c_adapter i2c-3: master_xfer[0] W, addr=0x63, len=1
i2c_adapter i2c-3: master_xfer[1] R, addr=0x63, len=1
i2c_adapter i2c-3: master_xfer[0] W, addr=0x63, len=2
set_control id=0x980900 reg=0x310110 val=0x00 (mask 0xff)
set_control id=0x980901 reg=0x310110 val=0x3f00 (mask 0xff00)
set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff)
set_control id=0x980902 reg=0x310114 val=0x5a7f (mask 0xffff)
set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed]
set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed]
set_control id=0x980906 reg=0x320598 val=0x40 (mask 0x7f) [shadowed]

cx2388x blackbird driver version 0.0.5 loaded

cx2388x alsa driver version 0.0.5 loaded
ACPI: PCI Interrupt 0000:01:09.1[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
i2c-core: driver [cx25840] registered
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x44
i2c_adapter i2c-3: master_xfer[0] W, addr=0x44, len=0
i2c-core: driver [wm8775] registered
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x1b
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=0
wm8775 3-001b: chip found @ 0x36 (cx88[0])
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: master_xfer[0] W, addr=0x1b, len=2
i2c_adapter i2c-3: client [wm8775] registered with bus id 3-001b

Bis jetzt versagt die Fernbedienung und der Sound ( bekomme das Sound device nich hoch gefahren ( hmmmpf )

Aber ich hab Zeit ;o)

#### Nachtrag vom 28.06.06 ####

Das DVB-Frontend wird nun beim Hochfahren / DVB erst start geladen

#### Nachtrag Ende ####


MfG


BdMdesigN

 

[rue.fr]

linux-rudi01:~ # lspci
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1
)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio Processing Unit (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Contr oler (MCP) (rev a1)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Co ntroller (rev a3)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
01:04.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ether net Controller (rev 13)
01:08.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
01:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Se rial ATA Controller (rev 02)
03:00.0 VGA compatible controller: ATI Technologies Inc RV530 [Radeon X1600]
03:00.1 Display controller: ATI Technologies Inc RV530 [Radeon X1600] (Secondary )

das ist die ausgabe bei mir ich habe immer noch keinen passenden treiber für meine wintv nova ci gefunden