• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

KDE 4.3 friert ein nach schließen von UMTSMON

Ripley

Ripley

Hallo,

wenn ich UMTSMON beende / schließe, friert KDE ein und lässt sich nicht mehr bedienen.

Gibt es Tastenkombinationen um die Blockierung zu lösen?
In welchem Protokoll finde ich die Ursache?

Mein System:
OpenSUSE 11.2
Linux 2.6.31.5-0.1
KDE: 4.3.1 "release 6"
 
W

whois

Kannst du den PID mal im Terminal schliessen vielleicht bekommen wir da eine Fehlermeldung.
Steht irgendwas in den .xsession-errors?
 
OP
Ripley

Ripley

Hallo,

habe es über die Konsole gekillt. Keine Fehlermeldung. Eingefroren ist KDE erst, als ich UMTSMON wieder gestartet habe. (Das hatte ich noch nie.) Habe den Rechner neu gestartet. Hier ist der Inhalt von ".xsession-errors":

Code: 
/etc/X11/xim: Checking whether an input method should be started.
sourcing /etc/sysconfig/language to get the value of INPUT_METHOD
INPUT_METHOD is not set or empty (no user selected input method).
Trying to start a default input method for the locale de_DE.UTF-8 ...
There is no default input method for the current locale.
Dummy input method "none" (do not use any fancy input method by default)
startkde: Starting up...
kdeinit4: preparing to launch /usr/lib/libkdeinit4_klauncher.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kded4.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kbuildsycoca4.so
kbuildsycoca4 running...
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kconf_update.so
Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
X Error: XSyncBadAlarm 152
  Extension:    143 (Uknown extension)
  Minor opcode: 11 (Unknown request)
  Resource id:  0x0
X Error: XSyncBadAlarm 152
  Extension:    143 (Uknown extension)
  Minor opcode: 11 (Unknown request)
  Resource id:  0x0
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kcminit_startup.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_ksmserver.so
<unknown program name>(1662)/ KStartupInfo::createNewStartupId: creating:  "linux-1mmx;1262336672;844784;1662_TIME0" : "unnamed app"
kephald starting up 
XRANDR error base:  162 
RRInput mask is set!! 
RandRScreen::loadSettings - adding mode:  62 1440 x 900 
RandRScreen::loadSettings - adding mode:  63 1280 x 1024 
RandRScreen::loadSettings - adding mode:  64 1280 x 1024 
RandRScreen::loadSettings - adding mode:  65 1440 x 900 
RandRScreen::loadSettings - adding mode:  66 1280 x 960 
RandRScreen::loadSettings - adding mode:  67 1152 x 864 
RandRScreen::loadSettings - adding mode:  68 1024 x 768 
RandRScreen::loadSettings - adding mode:  69 1024 x 768 
RandRScreen::loadSettings - adding mode:  70 1024 x 768 
RandRScreen::loadSettings - adding mode:  71 832 x 624 
RandRScreen::loadSettings - adding mode:  72 800 x 600 
RandRScreen::loadSettings - adding mode:  73 800 x 600 
RandRScreen::loadSettings - adding mode:  74 800 x 600 
RandRScreen::loadSettings - adding mode:  75 800 x 600 
RandRScreen::loadSettings - adding mode:  76 640 x 480 
RandRScreen::loadSettings - adding mode:  77 640 x 480 
RandRScreen::loadSettings - adding mode:  78 640 x 480 
RandRScreen::loadSettings - adding mode:  79 640 x 480 
RandRScreen::loadSettings - adding mode:  80 720 x 400 
RandRScreen::loadSettings - adding crtc:  57 
RandRScreen::loadSettings - adding crtc:  58 
RandRScreen::loadSettings - adding output:  59 
Setting CRTC 0 on output "VGA1" (previous 0 ) 
RandRScreen::loadSettings - adding output:  60 
Setting CRTC 0 on output "DVI0" (previous 0 ) 
RandRScreen::loadSettings - adding output:  61 
Setting CRTC 57 on output "VGA2" (previous 0 ) 
CRTC outputs: (61) 
Output name: "VGA2" 
Output refresh rate: 59.8874 
Output rect: QRect(0,0 1440x900) 
Output rotation: 1 
XRandROutputs::init 
  added output  59 
  added output  60 
got a valid edid block... 
vendor code: "ACR" 
product id: 12 
serial number: 2455882650 
  added output  61 
output: "DVI0" QRect(0,0 0x0) 0 false false 
output: "VGA1" QRect(0,0 0x0) 0 false false 
output: "VGA2" QRect(0,0 1440x900) 0 false false 
load xml 
connected: 1 
looking for current "VGA2" 
known "*" has score: 0.125 
screen: 0 QRect(0,0 1440x900) 
looking for a matching configuration... 
connected: 1 
looking for current "VGA2" 
known "*" has score: 0.125 
found outputs, known: false 
connected: 1 
looking for current "VGA2" 
known "*" has score: 0.125 
activate external configuration!! 
registered the service: true 
screens registered on the bus: true 
outputs registered on the bus: true 
configurations registered on the bus: true 
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kglobalaccel.so
sh: /opt/kde3/bin/kreadconfig: Datei oder Verzeichnis nicht gefunden
sh: /opt/kde3/bin/kreadconfig: Datei oder Verzeichnis nicht gefunden
kdeinit4: preparing to launch /usr/bin/knotify4
kdeinit4: preparing to launch /usr/lib/libkdeinit4_plasma-desktop.so
QDBusObjectPath: invalid path ""
Object::connect: No such signal SystemTray::Manager::jobStateChanged(SystemTray::Job*)
Invalid D-BUS interface name 'org.kde.plasma-desktop.PlasmaApp' found while parsing introspection
kdeinit4: preparing to launch /usr/lib/kde4/kio_sysinfo.so
kio_sysinfo(2420) kdemain: *** Starting kio_sysinfo
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kaccess.so
<unknown program name>(2482)/ kdemain: Xlib XKB extension major= 1  minor= 0
kdeinit4: preparing to launch /usr/lib/libkdeinit4_krunner.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_nepomukserver.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kmixctrl.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_nepomukserver.so
Nepomuk server already running.
kdeinit4: preparing to launch /usr/lib/kde4/kio_trash.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kmix.so
kdeinit4: preparing to launch /usr/bin/kmail
kdeinit4: preparing to launch /usr/bin/hp-systray
[31;01merror: option -s not recognized[0m

[01mHP Linux Imaging and Printing System (ver. 3.9.8)[0m
[01mSystem Tray Status Service ver. 2.0[0m

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


[01mUsage: hp-systray [OPTIONS][0m


[01m[OPTIONS][0m
  Use Qt4:            --qt4 (Default)                                       
  Set the logging     -l<level> or --logging=<level>                        
  level:                                                                    
                      <level>: none, info*, error, warn, debug (*default)   
  Run in debug mode:  -g (same as option: -ldebug)                          
  This help           -h or --help                                          
  information:                                                              

  Startup even if no  -x or --force-startup                                 
  hplip CUPS queues                                                         
  are present:                                                              

kdeinit4: preparing to launch /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
kdeinit4: preparing to launch /usr/bin/hp-systray
kdeinit4: preparing to launch /usr/bin/ksmolt
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kmix.so
kdeinit4: preparing to launch /usr/bin/knemo
/usr/lib/python2.6/site-packages/gtk-2.0/gtk/__init__.py:127: RuntimeWarning: PyOS_InputHook is not available for interactive use of PyGTK
  set_interactive(1)
kdeinit4: preparing to launch /usr/bin/dolphin
kdeinit4: preparing to launch /usr/lib/kde4/kio_trash.so
kdeinit4: preparing to launch /usr/lib/kde4/kio_file.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kate.so
kdeinit4: preparing to launch /usr/lib/kde4/kio_file.so
QThreadStorage: Thread 0x805b3c8 exited after QThreadStorage 2147483635 destroyed
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kate.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kbuildsycoca4.so
<unknown program name>(1662)/ KStartupInfo::createNewStartupId: creating:  "linux-1mmx;1262336732;45334;1662_TIME0" : "unnamed app"
kbuildsycoca4 running...
QThreadStorage: Thread 0x805b3c8 exited after QThreadStorage 2147483635 destroyed
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kwrite.so
 
Jägerschlürfer

Jägerschlürfer

Moderator
Teammitglied
welche umtsmon Version verwendest du denn?

Evtl hilft schon ein Update auf eine neuere KDE Version und der Fehler ist behoben.
 
donpedro

donpedro

Hi,

bei mir habe ich das gleiche Problem. Vermutlich habe ich mir mit neuinstallierten Plasmomiden etwas zerschossen. Finde den Fehler nicht und gehe jetzt über Kinternet rein:
http://www.linux-club.de/viewtopic.php?f=15&t=107465
 
W

whois

Könnt ihr denn nicht mal vergleichen welche Plasmomiden ihr installiert habt.
Villeicht könnt ihr es so im Ausschlussverfahren raus bekommen.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben